Southern Folger 9100A User Manual
SECUR-PAK SYSTEMS
Maximum Security
9100A VEHICLE GATE OPERATOR
The 9100A Operator is designed for use on
vehicular entrances in a perimeter security
fence.
FUNCTION:
A remote switch activates a motor which
raises a vertical lock bar and propels the gate
open or closed.
S E C U R - P A K S Y S T E M S
9100A
VEHICLE GATE OPERATOR
MECHANICAL:
In an electrical emergency, the gate is
manually unlocked and propelled open by use of
a hand crank located in the motor box.
SAFETY:
The 9100 gate operator meets current UL 325
requirements for Class IV (Guarded Applications).
Primary entrapment protection is provided by
constant pressure pushbutton controls with the
audio alarm establishes the secondary safety
device to meet UL 325 safety requirements.
Additionally, the gate operator is UL listed for
Class III.
SECURE:
Sallyport locking system that features a
keyless three-point positive locking capability
making it impossible to open gate except by
electrical operation or emergency
hand-cranking.
SERVICABLE:
Motor assembly is located at ground level providing easy access for routine inspection of the
motor unit and limit assembley.
DURABLE:
The entire drive and locking assemblies are
encased in a 10 gauge hot-dip galvanized steel
enclosure providing superior protection from
inmate tampering and inclement
weather conditions.
TECHNICAL DATA:
• GATE SIZES:
Standard gate clear opening
width 12’ to 30’ with 1’ increments and 14’ to 18’ clear
height with 1’ increments
• ELECTRICAL:
Electro-mechanical (non-solid
state) Controller, motor 1 HP,
110, 120 Volt 60Hz, Single
Phase – 208/230, 460 Volt
60Hz, Three-Phase.
Variable Speed Controller,
motor 1 HP, 208, 230 Volt
Single-Phase – 208, 230 Volt
Three- Phase. This electrical
package offers gate speeds up
to 2.2 feet per second.
• CONTROL WIRING:
24 Volt
• GEAR BOX HEATER:
110 Volt electrical service
providing power directly to
thermostat controlling the
internal gearbox heater
• MOTOR BOX HOUSING:
10 gauge galvanized steel
containing NEMA 4 electrical
enclosure meeting the requirements
of UL and equipped with a 6 tumbler paracentric mechanical lock.
• OVERHEAD TRACK:
Two 8” (2.03 mm) structural steel
channels joined together weighing
a total of 34.5 lbs/ft (15.65kg/m).
• GATE TROLLEYS:
Milled from a single block of
stainless steel and use 2 sealed
ball bearings per wheel, 6 wheels
per trolley.
• SUPPORT STRUCTURE:
4” OD schedule 40 pipe
• LOCKING COLUMN:
W-4 “H” beam @ 13 lbs/ft
(101.6 mm x 18.9 kg/m)
• DRIVE CHAIN:
#60 roller chain
E10
Revised 3/09
P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211
SECUR-PAK SYSTEMS
Maximum Security
S E C U R - P A K S Y S T E M S
9100A
VEHICLE GATE OPERATOR
STANDARD FEATURES:
• Six tumbler paracentric key motor box locks
• 208 VAC Three-Phase
• Easy-to-reach mechanical operation and
maintenance access
• Three-point locking
• Enclosed drive
• Manual hand cranking
• Gate sizes 12’-30’ wide, 14’ to 18’ high
• Gear box heater: 110 Volt electrical service
providing power directly to thermostat
controlling the internal gearbox heater
OPTIONAL FEATURES:
• Remote control panel
• 110 or 220 Volt 60Hz single-phase power
• 460 Volt 60Hz three-phase power
• 50 Hz motors are offered for international projects
• Custom Gate openings
• Photo eyes and/or safety edges
• Special keying
NOTE: The optional features will increase lead time.
Also, additional charges will apply depending on
application.
Revised 3/09
FOR MORE INFORMATION, PLEASE CALL 210-533-1231
E11
Loading...