SoundOff Signal Combo License Plate User Manual

ECVR4(x)STTELP
ECVR4(x)STTELP-RD (Reduced Diodes)
Housing (note orientation)
#12 Screws
Light with Clear Base
INSTALLATION
A. Drill pilot holes for #12 screws 2” on
center. These must be horizontal.
B. Drill appropriate size hole in center for
wire connections. Hole should not have burrs or sharp edges that could scrape or chafe wire as this could create a fi re hazard.
C. Start #12 sheet metal screws (supplied)
in pilot holes. DO NOT INSTALL COMPLETELY.
D. Seat keyhole slots of housing over
screws and tighten. DO NOT OVER
TIGHTEN. E. Make electrical connections. F. Push wires through surface of vehicle
and back of housing and install light
making sure rim of light snaps into all
three tabs of housing. Note rib on bottom
of light mates with slot in housing.
Electrical Connections
White Wire Ground Black Wire Tail Light Red Wire Stop Light
TECHNICAL
SPECIFICATIONS
Overall
Dimensions:
Input Voltage
Range:
Certifi cations:
n4.6” x 2.9”D
9-16Vdc
Rib on bottom of Light fi ts into slot in housing
Important Information:
• DO NOT connect this device to a strobe power supply. This product is self-contained and does not require an external power supply.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product please visit our website at www.soundoffsignal.com and select the “Warranty & Returns”
link along the left column of our home page. If you have questions regarding this product please contact Technical Services, Monday - Friday, 8 am to 5 pm at 1.800.338.7337, press #4 to
skip the automated message. Questions or comments that do not require immediate attention may be emailed to techsupport@soundoffsignal.com.
1.800.338.7337. / www.soundoffsignal.com / Thank you for trusting us with your safety!
Stop/Tail/Turn: SAE J1398,
J1395, J585,
DOT, FMVSS
108 & CMVSS
License Plate:
SAE J587, FMVSS
108 & CMVSS
Operating
-20º to +65º C
Temperature:
WARNING
!
This product contains high intensity LED devices.
To prevent eye damage, DO NOT stare into the
light beam at close range.
ECVR4(x)STTELP 4.09
Loading...