Quick Start Guide
XG 85w/105w/115w/125w/135w
Before you begin please confirm
that you have a working Internet
connection and make sure you have
the account information available that
was provided by your ISP.
1. Preparation
Congratulations on your purchase of the Sophos XG device to protect your data
networks and computers. This Quick Start Guide describes in short steps how to
assemble the appliance and explains how to open the web-based Admin Console on
the security system from your administration client PC. The Admin Console allows
you to configure every aspect of the security system.
What does the box include
Registration and License Activation
Browse to the MySophos portal at www.sophos.com/en-us/mysophos, create an
account and register your device. You can then apply additional subscriptions which
you have purchased for your device. Alternatively you can register your device and
create a MySophos Account directly from the Admin console (see Section 5).
Support & Documentation
For more information and technical support please visit
www.sophos.com/en-us/support or contact your local reseller.
Quick Start Guide XG 85w/105w/115w/125w/135w
This Quick Start Guide
and Security Notes
RJ45 to DB9 adapter cable
RJ45 Ethernet cable
1 power cable
3 Antennas
(2 on XG 85w)
XG
85w/105w/115w/125w/135w
Power Supply
2. Mount and connect the device
Mount the antennas
Connect the provided antennas to the connectors on the back of your appliance and
align them in a vertical position.
Connect the ports to the internal and external networks.
1. Connect the Port 1/LAN port via a hub or switch to the internal network. For
this purpose, please use the RJ45 Ethernet cable of the scope of supply. Note
that your administration client PC must also be connected to this network.
2. Connect the Port 2/WAN to the external network. The connection
to the WAN depends on the type of Internet access.
The XG devices are shipped with the following default settings:
Ethernet Port IP Address Zone
1 172.16.16.16/255.255.255.0 LAN
2 DHCP WAN
Admin Console Username admin Default Gateway DHCP
Admin Console Password admin DNS proxy Enabled
CLI Console Password admin DHCP service Enabled
Mount the appliance to the rack
If you want to mount the device within a rack please use the optionally available
rackmount kit for this device.
Quick Start Guide XG 85w/105w/115w/125w/135w
Internet
e.g.,
DSL modem
Internal network
admin client PC
XG Appliance
Switch
Port 2/WAN
Port 1/LAN
3. Power it on
Connect the device to the power socket and turn it on
Connect the appliance to the power supply using the power cable from the scope of
supply. Turn the appliance on. The power switch is on the back side of the housing next
to the power supply plug. Once the security system has booted completely, you’ll hear
an acoustic signal: five beeps in a row.
4. Connect your Workstation
Use your browser to make the initial connection to the Admin Console
You will need to configure a workstation with the necessary LAN properties to access
the Admin Console. You can change these settings later to match your existing
network. The location of the menu for these settings depends on the operating system
of your client.
Example: With Windows 7, the menu can be found under Start >> Control Panel >>
Network and Sharing Center
Start the browser and enter the management IP address of the device’s LAN port your
PC is connected to:: https://172.16.16.16:4444
Login with user/PW admin/admin.
Quick Start Guide XG 85w/105w/115w/125w/135w
Workstation connection properties
Configure your network interface to either use
DHCP or use the following static entries:
Ì IP address: 172.16.16.2
Ì Netmask: Enter 255.255.255.0
Ì Standard gateway: Enter the IP address of
the device’s internal network card
(Port 1/LAN): 172.16.16.16
Ì DNS server: Enable this option and enter
the IP address of the internal network
card (Port 1/LAN): 172.16.16.16
Power switch
Quick Start Guide XG 85w/105w/115w/125w/135w
5. Setup the device
Register the Device
If you have not registered your device on MySophos before you will be presented a
registration screen.
If needed you can adjust network settings of your interfaces by clicking “Basic Setup”.
After clicking “Register Device”, you are redirected to the MySophos portal website. If
you already have a MySophos account, specify your login credentials under “I have an
account already”. If you are a new user, sign up for a MySophos account by filling in the
details under “Register for MySophos”.
Click Continue to complete the registration process.
After successful registration click on “Initiate License Synchronization” to synchronize
license information with Sophos servers.
After successful synchronization click “Click here” on the presented “Welcome” screen
to start your initial device configuration.
Start Configuration
For initial configuration you should start the configuration wizard and change the
interface(s) IP address(es), default gateway, DNS settings and Date/Time Zone to
match your local network settings.
For next steps and detailed information please check the Online Help or the Sophos
Firewall Admin Guide.*
Welcome
To your Sophos Device
To get started activate your device below. Until you activate, you
may only access and edit settings in “Basic Setup”
XXXXXXXXXXXXXXX
Activate Appliance
Basic Setup
Serial Number
Network Configuration Wizard
Start
Skip
Secure your enterprise with
Sophos integrated internet security
* Available at www.sophos.com/en-us/support/documentation
Bevor Sie beginnen, vergewissern
Sie sich, dass Sie mit dem Internet
verbunden sind und die Kontodaten
vorliegen, die Sie von Ihrem ISP
erhalten haben.
1. Vorbereitung
Herzlichen Glückwunsch zum Kauf dieses Sophos XG-Geräts zum Schutz Ihrer
Datennetzwerke und Computer. Diese Kurzanleitung beschreibt schrittweise die
Montage der Appliance und erläutert, wie Sie über Ihren Administrations-Client-PC
die webbasierte Admin Console auf dem Sicherheitssystem öffnen. Über die Admin
Console können Sie jeden Aspekt des Sicherheitssystems konfigurieren.
Verpackungsinhalt
Registrieren und Lizenz aktivieren
Gehen Sie zum MySophos-Portal unter www.sophos.com/de-de/mysophos, legen Sie
ein Konto an und registrieren Sie Ihr Gerät. Sie können dann weitere Abonnements
freischalten, die Sie für Ihr Gerät erworben haben. Alternativ können Sie direkt über
die Admin Console Ihr Gerät registrieren und ein MySophos-Konto anlegen (siehe
Abschnitt 5).
Support und Dokumentation
Weitere Informationen und technischen Support erhalten Sie unter www.sophos.com/
de-de/support oder bei Ihrem Vertriebspartner vor Ort.
Diese Kurzanleitung und
Sicherheitshinweise
RJ45 auf DB9 Adapterkabel
RJ45 Ethernet-Kabel
1 Netzkabel
3 Antennen
(2 bei XG 85w)
XG
85w/105w/115w/125w/135w
Netzteil
Kurzanleitung XG 85w/105w/115w/125w/135w
Loading...