Sophos SG 105(w), SG 115(w), SG 125(w), SG 135(w), XG 105 Operating Instructions Manual

Operating Instructions

SG 105(w)/115(w)/125(w)/135(w) Rev. 3

1SG 105(w)/115(w)/125(w)/135(w) Rev. 3

Operating Instructions

Foreword

We are pleased to welcome you as a new customer of our Sophos SG appliances.

To install and configure the hardware appliance you can use the following
documents:

Ì Hardware Quick Start Guide: Connection to the

system peripherals in a few steps

Ì Operating Instructions: Notes on the security and

commissioning of the hardware appliance

Ì Administration Guide: Installing and configuring the software appliance

The Hardware Quick Start Guide and the Safety Instructions are also delivered
in printed form together with the hardware appliance. The instructions must be
read carefully prior to using the hardware and should be kept in a safe place.

You may download all user manuals and additional documentation from the
support webpage at: sophos.com/support

Security Symbols

The following symbol and its meaning appears in the Hardware Quick Start
Guide, Safety Instructions and in these Operating Instructions.

Caution and Important Note. If these notes are not correctly observed:

Ì This is dangerous to life and the environment

Ì The appliance may be damaged

Ì The functions of the appliance will be no longer guaranteed

Ì Sophos shall not be liable for damages arising from a

failure to comply with the Safety Instructions

Designed Use

The hardware appliances are developed for use in networks.
The SG 105(w)/115(w)/125(w)/135(w) models may be operated as a standalone
appliance. The hardware appliance can be used in commercial, industrial and
residential environments.

The SG 105(w)/115(w)/125(w)/135(w) models belong to the appliance group B.

The hardware appliance must be installed pursuant to the current installation
notes. Otherwise failure-free and safe operation cannot be guaranteed. The EU
declaration of conformity is available at the following address:

Sophos Technology GmbH
Amalienbadstr. 41/Bau 52
76227 Karlsruhe
Germany

2SG 105(w)/115(w)/125(w)/135(w) Rev. 3

Operating Instructions

CE Labeling, FCC and Approvals

The SG 105(w)/115(w)/125(w)/135(w) appliances comply with CB, CE, FCC
Class B, ISED, VCCI, RCM, UL, CCC, and BIS.

Important Note: For computer systems to remain CE and FCC compliant, only CE
and FCC compliant parts may be used. Maintaining CE and FCC compliance also
requires proper cable and cabling techniques.

Operating Elements and Connections

SG 105(w)/115(w)* (Rev. 3)

Status LEDs

(w-model has additional Wi-Fi LED)

1 x COM

(RJ45)

2 x external antenna

(SG 105w and SG 115w only)

2 x

USB 2.0

1 x Micro
USB

4 x GbE

copper port

1 x GbE SFP

(shared)

1 x

HDMI

Power Supply

Connector for optional 2nd
redundant power supply

SG 125(w)/135(w)* (Rev. 3)

Status LEDs

(w-model has additional Wi-Fi LED)

1 x COM

(RJ45)

3 x external antenna

(SG 125w and
SG 135w only)

2 x

USB 2.0

8 x GbE

copper port

Power

Supply

Optional 2nd redundant
power supply

1 x Micro
USB

1 x

HDMI

Expansion bay

(shown with optional

module incl. 2 antennas)

1 x GbE

SFP

* The displayed front images are of the SG 115 and 135 device. The displayed back images are of the SG 115w device

and the SG 135w. Devices may vary slightly.