Sophos UTM 425 Operating Instructions Manual

Operating Instructions

Sophos UTM 425

UTM 425 Operating Instructions

Foreword

We are pleased to welcome you as a new customer of our Sophos UTM
hardware appliances.

To install and configure the hardware appliance you can use the following
documents:

Ì Hardware Quick Start Guide: Connection to the system peripherals in a few

steps

Ì Operating Instructions: Notes on the security and commissioning of the

hardware appliance

Ì Administration Guide: Installing and configuring the software appliance

The Hardware Quick Start Guide and the Security Notes are also delivered in
printed form together with the hardware appliance. The instructions must be
read carefully prior to using the hardware and should be kept in a safe place.

You may download all user manuals and additional documentation from the
support webpage at: astaro.com/support

Security Symbols

The following symbol and its meaning appears in the Hardware Quick Start
Guide, Security Notes and in these Operating Instructions.

Caution and Important Note. If these notes are not correctly observed:

Ì This is dangerous to life and the environment

Ì The appliance may be damaged

Ì The functions of the appliance will be no longer guaranteed

Ì Sophos shall not be liable for damages arising from a failure to comply

with the security notes

Designed Use

The hardware appliances are developed for use in networks. The UTM 425
model may be operated as a standalone appliance.

The hardware appliance can be used in commercial, industrial and residential
environments.

The UTM 425 model belongs to the appliance group A.

The hardware appliance must be installed pursuant to the current
installation notes. Otherwise the failure-free and safe operation cannot be
guaranteed. The EU declaration of conformity is available at the following
address:

Astaro GmbH & Co. KG - a Sophos company
Amalienbadstr. 41/Bau 52
76227 Karlsruhe
Germany

UTM 425 Operating Instructions

CE Labeling, FCC and Approvals

The UTM 425 appliance complies with FCC Class A, CE, C-Tick, VCCI and UL.

Important Note: For computer systems to remain CE and FCC compliant,

only CE and FCC compliant parts may be used. Maintaining CE and FCC
compliance also requires proper cable and cabling techniques.

Operating Elements and Connections

Sophos UTM 425 (rev.5)

Controls

Power (LED Display)

Green Power on

Green HDD (Hard disk access)

LEDs on each Ethernet connector

Link LED Green Constantly

1. The Ethernet port is receiving power.

2. Good connection between the
Ethernet port and hub.

Off

1. The adapter and switch are
not receiving power.

2. No connection between
both ends of network.

3. Network drivers have not been loaded
or do not function correctly.

Activity

LED

Yellow Flashing

The adapter is sending or receiving network
data. The frequency of the flashes varies
with the amount of traffic.

Off No activity

LCD and
control keys

COM LED: power

hard disk

power
switch

2 x USB 6 x 10/100/1000 Base-TX ports

fans VGA USB

2 x SFP
GBIC ports

power
supply