Sony XS-F1320SL User Manual
Specifications
3-046-196-11 (1)
Speaker Coaxial 2-way:
Maximum input power 120 W
Rated input power 30 W
Impedance 4 ohms
Sensitivity 90 dB/W/m
Frequency response 40 – 30,000 Hz
Mass Approx. 630 g per speaker
Design and specifications are subject to change without notice.
Dimensions
Woofer 13 cm,
polypropylene cone type
Tweeter 3 cm,
PEI, balance dome type
9.5
5
ø 162
ø 137.5
130
ø
ø 80
13cm Coaxial
2-way Speaker
Instructions
ø 114
Unit: mm
20.5
3
* Mounting depth
48*
XS-F1320SL
Sony Corporation 2000 Printed in China
Precautions
•Do not continuously drive the speaker system over the power handling capacity.
•Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the
speaker system to protect them from damage caused by the magnets in the speakers.
If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony
dealer before mounting.
Mounting
Before Mounting
•A depth of at least 48 mm is required for mounting the woofer. Keep the following in mind when
choosing a mounting location.
•A hole may already be provided in the metal frame of the front door.
•Nothing should interfere with the speaker inside the door.
•The speaker inside the door must not come into contact with the window when it is open.
•Be careful that speakers are out of the way of the window cranks, door handles, and arm rests.
Parts List
1
2
2.5 m
× 2
3
M4 × 30
× 8
If you cannot find an appropriate mounting location, check with your car dealer or consult the
nearest Sony dealer.
Mounting example
1
Mark the four bolt holes. Make them 3.3 mm* in diameter.
* When using 4 = 5 mm
1
ø 115 mm
c
2
4
Remove the grille net.
× 8
5
× 2
6
× 2
6
3
Black-striped cord
*
2
Power amplifier, etc.
5
ø 3.3 mm*
4
Speaker
3
4
* White cord — Left speaker
Grey cord — Right speaker
5
Door panel
5
Press and insert the edges of the grille net.
6
5
How to remove the grille net
6
5
Loading...