Sony XNV-770BT, XNV-660BT Operating Manual

4-197-968-11 (1)

AV Navigation

Operating Instructions

Mode d’emploi

Manual de instrucciones

Owner’s Record

The model and serial numbers are located on the bottom of the unit. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No.

Serial No.

XNV-770BT XNV-660BT

Be sure to install this unit in the dashboard of

– –

–

the car for safety. For installation and connections, see the supplied installation/ connections manual.

About this manual

• This manual contains instructions for XNV770BT and XNV-660BT.

• XNV-770BT is the model representatively used for illustration purposes.

• For details on the navigation function, refer to the leaflet (supplied by TomTom) for the navigation module.

Warning

To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

For the State of California, USA only

Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains

perchlorate

Warning if your car’s ignition has no ACC position

Be sure to set the Auto Off function (page 53). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off.

To cancel the demonstration (Demo) display, see page 57.

Table of Contents

Notes on safety. . . . . . . . . . . . . . . . . . . . . . . . . .7

Notes on installation. . . . . . . . . . . . . . . . . . . . . .7

Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Notes on Bluetooth. . . . . . . . . . . . . . . . . . . . . . .9

Playable discs and symbols used in this

manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Location and function of controls . . . . . . . . . .11

Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Card remote commander RM-X170 . . . . . .14

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . 16

Performing initial settings. . . . . . . . . . . 16

Preparing the card remote

commander. . . . . . . . . . . . . . . . . . . . . . . 16

Basic Operations

Using the navigation function. . . . . . . . 17

Listening to the radio. . . . . . . . . . . . . . . 18

Playing discs . . . . . . . . . . . . . . . . . . . . . 20

Advanced Operations — Radio

Storing and receiving stations . . . . . . . . . . . . .24

Storing automatically — BTM . . . . . . . . . .24

Storing manually . . . . . . . . . . . . . . . . . . . . .24

Receiving stored stations. . . . . . . . . . . . . . .24

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Selecting PTY . . . . . . . . . . . . . . . . . . . . . . .25

Setting CT . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Advanced Operations — Discs

Using PBC functions — Playback control . . . 25

Configuring audio settings . . . . . . . . . . . . . . . 26

Changing the audio language/format . . . . . 26

Changing the audio channel . . . . . . . . . . . . 26

Adjusting the audio output level

— Dolby D level. . . . . . . . . . . . . . . . . . . . . 26

Locking discs — Parental control. . . . . . . . . . 27

Activating parental control . . . . . . . . . . . . . 27

Changing the area and its movie rating

level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Repeat and shuffle play. . . . . . . . . . . . . . . . . . 27

Direct search play . . . . . . . . . . . . . . . . . . . . . . 28

USB Device Operations

Playing a USB device . . . . . . . . . . . . . . . . . . . 29

Repeat and shuffle play. . . . . . . . . . . . . . . . . . 29

Enjoying music according to your mood

— SensMe™ . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Before using the SensMe™ function . . . . . 30

Installing “SensMe™ Setup” and “Content

Transfer” in your computer. . . . . . . . . . . . . 30

Registering a USB device using “SensMe™

Setup” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Transferring tracks to the USB device using

“Content Transfer” . . . . . . . . . . . . . . . . . . . 31

Playing tracks in the channel

— SensMe™ channels . . . . . . . . . . . . . . . . 31

Playing tracks in the mood map

— SensMe™ mood. . . . . . . . . . . . . . . . . . . 33

iPod Operations

Playing an iPod . . . . . . . . . . . . . . . . . . . . . . . . 34

Setting the play mode . . . . . . . . . . . . . . . . . . . 34

Repeat and shuffle play. . . . . . . . . . . . . . . . . . 35

Operating an iPod directly

— Passenger control . . . . . . . . . . . . . . . . . . . . 35

Useful Functions

Sound Adjustment

Listing up tracks/images/video files

— List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Selecting a track/image/video file. . . . . . . . 36

Selecting a file type. . . . . . . . . . . . . . . . . . . 36

Searching a track by listening to track passages

— ZAPPIN™ . . . . . . . . . . . . . . . . . . . . . . . . . 36

Using Gesture Command . . . . . . . . . . . . . . . . 37

Handsfree Calling and Audio Streaming — Bluetooth

Before using the Bluetooth function . . . . . . . . 37

Basic procedure of the Bluetooth

function. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Bluetooth status indication . . . . . . . . . . . . . 38

Installing the external microphone . . . . . . . 38

Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Searching from this unit . . . . . . . . . . . . . . . 38

Searching from the Bluetooth device . . . . . 39

Connecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Handsfree calling. . . . . . . . . . . . . . . . . . . . . . . 40

Making calls . . . . . . . . . . . . . . . . . . . . . . . . 40

Receiving calls . . . . . . . . . . . . . . . . . . . . . . 42

Operations during a call . . . . . . . . . . . . . . . 42

Phonebook management . . . . . . . . . . . . . . . . . 42

Storing phonebook data . . . . . . . . . . . . . . . 43

Browsing a phonebook in a cellular

phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Deleting phonebook data . . . . . . . . . . . . . . 44

Editing a contact . . . . . . . . . . . . . . . . . . . . . 44

Call data management . . . . . . . . . . . . . . . . . . . 45

Call history . . . . . . . . . . . . . . . . . . . . . . . . . 45

Preset dial . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Locking the personal information. . . . . . . . 46

Audio streaming . . . . . . . . . . . . . . . . . . . . . . . 46

Listening to a Bluetooth device through

this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Operating the Bluetooth device with

this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Bluetooth settings . . . . . . . . . . . . . . . . . . . . . . 46

Selecting the sound quality — EQ7 . . . . . . . . 47

Customizing the equalizer curve

— EQ7 Tune . . . . . . . . . . . . . . . . . . . . . . . 47

Adjusting the sound characteristics . . . . . . . . 48

Optimizing sound for the listening position

— Intelligent Time Alignment . . . . . . . . . . . . 48

Precisely calibrating the listening position

— Intelligent Time Alignment Tune . . . . . 49

Speaker configuration and volume setup . . . . 49

Creating a virtual center speaker

— CSO. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Using rear speakers as subwoofer

— RBE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Adjusting the speaker volume . . . . . . . . . . 50

Monitor Adjustment

Adjusting the monitor angle

(XNV-770BT only). . . . . . . . . . . . . . . . . . . . . 50

Touch panel calibration . . . . . . . . . . . . . . . . . 50

Setting the background screen . . . . . . . . . . . . 51

Selecting the picture quality

— Picture EQ . . . . . . . . . . . . . . . . . . . . . . . . . 51

Customizing the picture quality. . . . . . . . . 51

Selecting the aspect ratio . . . . . . . . . . . . . . . . 52

Settings

Basic setting operation . . . . . . . . . . . . . . . . . . 52

General settings. . . . . . . . . . . . . . . . . . . . . . . . 53

Sound settings. . . . . . . . . . . . . . . . . . . . . . . . . 55

Screen settings . . . . . . . . . . . . . . . . . . . . . . . . 57

DVD and other playback settings. . . . . . . . . . 58

Setting the security code. . . . . . . . . . . . . . . . . 60

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . 60

Using Optional Equipment

Auxiliary audio/video equipment . . . . . . . . . . 61

Rear view camera . . . . . . . . . . . . . . . . . . . . . . 61

Rear view camera settings . . . . . . . . . . . . . 62

continue to next page t

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Notes on LCD panel . . . . . . . . . . . . . . . . . .62

Notes on discs . . . . . . . . . . . . . . . . . . . . . . .63

Playback order of MP3/WMA/AAC/JPEG/

MPEG-4 files. . . . . . . . . . . . . . . . . . . . . . . .63

About MP3 files . . . . . . . . . . . . . . . . . . . . .64

About WMA files . . . . . . . . . . . . . . . . . . . . 64

About AAC files . . . . . . . . . . . . . . . . . . . . .64

About JPEG files . . . . . . . . . . . . . . . . . . . . .64

About MPEG-4 files . . . . . . . . . . . . . . . . . .64

About iPod. . . . . . . . . . . . . . . . . . . . . . . . . .64

About Bluetooth function . . . . . . . . . . . . . . 65

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . .66

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . .66

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .68

Error displays/messages . . . . . . . . . . . . . . .71

Language code/area code list. . . . . . . . . . . . . .73

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Support site

If you have any questions or for the latest support information on this product, please visit the web site below:

http://esupport.sony.com http://www.sony.com/mobileAV

Provides information on:

• Models and manufacturers of compatible digital audio players

• Models and manufacturers of compatible cellular phones and the FAQ

about Bluetooth function

Notes on safety

Notes on installation

• Comply with your local traffic rules, laws and regulations.

• While driving – Do not watch or operate the unit, as it may lead

to distraction and cause an accident. Park your car in a safe place to watch or operate the unit.

– Do not use the setup feature or any other

function which could divert your attention from the road.

– When backing up your car, be sure to

look back and watch the surroundings carefully for your safety, even if the rear view camera is connected. Do not depend on the rear view camera exclusively.

• While operating – Do not insert your hands, fingers or foreign

object into the unit while functioning, as it may

cause injury or damage to the unit. – Keep small articles out of the reach of children. – Be sure to fasten seatbelts to avoid injury in the

event of a sudden movement of the car.

Preventing an accident

Pictures appear only after you park the car and set the parking brake. If the car starts moving during video playback, the picture is automatically switched to the background screen after displaying the caution below.

“Video blocked for your safety.”

The monitor connected to the REAR VIDEO OUT is active while the car is in motion. The picture on the display is switched to the background screen, but audio source can be heard.

Do not operate the unit or watch the monitor while driving.

• We recommend this unit should be installed by a qualified technician or service personnel. – If you try to install this unit by yourself, see the

supplied installation/connections manual and install the unit properly.

– Improper installation may cause battery drain or

a short circuit.

• If the unit does not work properly, check the connections first, referring to the supplied installation/connections manual. If everything is in order, check the fuse.

• Protect the unit surface from damage. – Do not expose the unit surface to chemicals,

such as insecticide, hair spray, insect repellent, etc.

– Do not leave rubber or plastic materials in

contact with the unit for a long time. Otherwise, the finish of the unit may be impaired, or deformation may occur.

• When installing, be sure to fix securely.

• When installing, be sure to turn the ignition off. Installing the unit with the ignition on may cause battery drain or a short circuit.

• When installing, be sure not to damage any car parts such as pipes, tubes, fuel tank or wiring by using a drill, as it may cause a fire or an accident.

Copyrights

This product uses font data which is licensed to Sony by Monotype Imaging Inc. or its affiliates.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

Microsoft, Windows, Windows Vista and Windows Media and logos are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

“DVD VIDEO,” “DVD-R,” “DVD-RW,” “DVD+R,” and “DVD+RW” are trademarks.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

ZAPPIN is a trademark of Sony Corporation.

12 TONE ANALYSIS and its logo are trademarks of Sony Corporation.

“WALKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation.

SensMe and the SensMe logo are trademarks or registered trademarks of Sony Ericsson Mobile Communications AB.

Music recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com.

CD and music-related data from Gracenote, Inc., copyright © 2000-2010 Gracenote. Gracenote Software, copyright © 2000-2010 Gracenote. This product and service may practice one or more of the following U.S. Patents: #5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Some services supplied under license from Open Globe, Inc. for U.S. Patent: #6,304,523.

Gracenote and CDDB are registered trademarks of Gracenote. The Gracenote logo and logotype, and the “Powered by Gracenote” logo are trademarks of Gracenote.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

Apple, Macintosh and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.

TomTom is a trademark of TomTom N.V.

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM

HD Radio

is a proprietary trademark of

iBiquity Digital Corp.

The “SAT Radio Ready” logo indicates that this product will control a satellite

radio tuner module (sold separately). Please see your nearest authorized Sony dealer for details on the satellite radio tuner module. “SAT Radio,” “SAT Radio Ready,” the SAT Radio and SAT Radio Ready logos and all related marks are trademarks of Sirius XM Radio Inc. and XM Satellite Radio Inc.

Notes on Bluetooth

Caution

IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.

IMPORTANT NOTICE!

Safe and efficient use

Changes or modifications to this unit not expressly approved by Sony may void the user’s authority to operate the equipment. Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product.

Driving

Check the laws and regulations on the use of cellular phones and handsfree equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require.

Connecting to other devices

When connecting to any other device, please read its user guide for detailed safety instructions.

Radio frequency exposure

RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device. Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not affect its electronic system. Check regularly that all wireless device equipment in your car is mounted and operating properly.

Emergency calls

This Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies). Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength. Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with your local service provider.

Playable discs and symbols used in this manual

This unit can play various video/audio discs. The following chart helps you to check if a disc is supported by this unit, as well as what functions are available for a given disc type.

Disc symbol in manual Disc format

DVD VIDEO

DVD-R*

/ DVD-R DL*1 / DVD-RW*

(Video mode/VR mode)

VIDEO

DVD+R*

/ DVD+R DL*1 / DVD+RW*

Video CD

(Ver. 1.0/1.1/2.0)

Audio CD

AUDIO

*1 Audio files can also be stored. *2 Video/image files can also be stored.

Note

“DVD” may be used in this manual as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/ DVD +RWs.

CD-ROM*

/ CD-R*2 / CD-RW*

The following chart shows the supported compression formats and their file types. Available functions differ depending on the format, regardless of disc type. The format symbols below appear next to the description of functions available for that format.

Format symbol in manual File type

MP3 audio file

WMA audio file

AAC audio file

JPEG image file

MPEG-4

Tip

For details on compression formats, see page 64.

Note

Even compatible discs may not be playable on this unit, depending on their recorded condition.

MPEG-4 video file

Location and function of controls

6 7 8 9

Main unit

XNV-770BT

VOL

2 3 4 5

Refer to the pages listed for details.

A Disc slot (located behind the front panel)

page 20

B VOL (Volume) –/+*

C Receptor for the card remote

commander

D Display window/touch panel

E Reset button page 16

F (Bluetooth) signal indicator

page 38

buttons

TOP

OFFSOURCE

G TOP button

To open the top menu.

H SOURCE/OFF button*

Press to turn on the power/change the source: “Tuner” (Radio), “Disc,” “AUX” (Auxiliary equipment), “USB/iPod,” “BT Audio” (Bluetooth Audio). Press for 1 second to turn off the power. Press for more than 2 seconds to shut off completely.

I Z (Open/Close) button page 20

*1 The VOL + button has a tactile dot. *2 If an HD Radio tuner or SAT tuner is connected:

when (SOURCE/OFF) is pressed, the connected device (“HD Radio,” “XM” or “Sirius”) will appear in the display.

continue to next page t

XNV-660BT

Refer to the pages listed for details.

A Z (Eject) button page 20

B Reset button page 16

C Receptor for the card remote

commander

D Disc slot page 20

E TOP button

To open the source list.

F (Bluetooth) signal indicator

page 38

G Volume control dial

H SOURCE/OFF button*

I Display window/touch panel

* If an HD Radio tuner or SAT tuner is connected:

when (SOURCE/OFF) is pressed, the connected device (“HD Radio,” “XM” or “Sirius”) will appear in the display.

Screen displays

02q

When no source is selected:

132

A “Source List” key

To open the source list.

B “Navi”/“Navigation” key

To enter the navigation mode.

Source List

Top menu:

TopNavi

56 879

Navigation

ATT

AV Source BT Phone

M.OFF

Source list:

56 83

Tun er

ATT

DiscAUX

SB/iPod

Top

12:00

C “Top” key

To open the top menu.

D Clock display page 57, 60

E (Close) key

To close the menu.

F “ATT” (Attenuate) key*

To attenuate the sound. To cancel, touch again.

G (Switch view) key

To select the view mode: “Navigation Only,” “Dual Screen Navi + A/V (Large),” “Dual Screen Navi + A/V (Small).”

H (Setting) key

To open the setting menu.

I “M.OFF” (Monitor off) key

To turn off the monitor and the button illumination. To turn back on, touch anywhere on the display.

J “AV Source” key

To open the source list.

K “BT Phone” key

To enter the Bluetooth Phone mode.

L Source select keys*

To change the source: “Tuner” (Radio), “Disc,” “AUX” (Auxiliary equipment), “USB/iPod,” “SensMe™,” “BT Audio” (Bluetooth Audio).

*1 Appears only when a source is selected. *2 If an HD Radio tuner or SAT tuner is connected: to

select the connected device, touch “External,” then “HD Radio,” “XM” or “Sirius.”

SensMe™

ExternalBT Audio

12:00

Card remote commander RM-X170

8 9 q;

3 4

• The card remote commander can be generally used to operate the audio controls simply. For menu operations, use the touch panel.

• Refer to the pages listed for details.

• Remove the insulation film before use (page 16).

A OFF button

Press to turn off/stop the source. Press and hold to shut off completely.

B MONITOR OFF button

To turn off the monitor and the button illumination. To turn back on, press again.

qs qd

qf qg

E EQ (Equalizer) button

To select an equalizer curve from 7 music types (“Xplod”/“Vocal”/“Edge”/“Cruise”/ “Space”/“Gravity”/“Custom”/“OFF”).

F Number buttons page 28

Radio:

Press to receive stored stations. Press and hold to store stations.

Disc/USB:

To locate a title/chapter/track.

G CLEAR button

To delete an entered number.

C POSITION button

To switch the listening position (“Front L”/ “Front R”/“Front”/“All”/“Custom”/“OFF”).

D O (Return) button

To return to the previous display/return to the menu on a VCD*

H ATT (Attenuate) button

To attenuate the sound. To cancel, press again.

I u (Play/Pause) button

J .m/M> buttons

Radio:

Press to tune in stations automatically. Press and hold to find a station manually.

Disc*

/USB:

Press to skip a chapter/track/scene/file. Press and hold momentarily to reverse/fastforward the video. Press and hold to reverse/fast-forward track. Bluetooth Audio*

Press to skip a track. Press and hold to reverse/fast-forward track.

K DVD playback setting buttons

(AUDIO):

To change the audio language/format. (For VCD/CD/MP3/WMA/AAC/MPEG-4, to change the audio channel.)

(SUBTITLE):

To change the subtitle language.

(ANGLE):

To change the viewing angle.

(TOP MENU):

To open the top menu on a DVD.

(MENU):

To open the menu on a disc.

L ZAP button

To enter the ZAPPIN™ mode.

M </M/m/, (Cursor)/ENTER buttons

page 20

To control the menu on a DVD.

*1 When playing with PBC function. *2 Operation differs depending on the disc (page 22). *3 Operation differs depending on the connected

Bluetooth device.

*4 If an HD Radio tuner or SAT tuner is connected:

when (SRC) is pressed, the connected device (“HD Radio,” “XM” or “Sirius”) will appear in the display. Furthermore, if (MODE) is pressed, you can switch the HD Radio tuner band or SAT tuner band.

*5 When two auxiliary devices are used. *6 When two or more exter nal devices are used.

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE/OFF) on the main unit is pressed, or a disc is inserted to activate the unit first.

N SRC (Source) button*

To turn on/change the source: “Tuner” (Radio), “Disc,” “AUX” (Auxiliary equipment), “USB/iPod,” “BT Audio” (Bluetooth Audio).

O MODE button*

Press to select the radio band (FM/AM)/ select an auxiliary device (AUX1/AUX2)* select an external device*

P VOL (Volume) +/– buttons

Getting Started

Resetting the unit

Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Press the reset button (page 11) with a pointed object, such as a ball-point pen.

Note

Pressing the reset button will erase the clock setting and some stored contents.

Performing initial settings

After resetting, the display for the initial settings appears.

Initial Setting

Subwoofer

Listening Position

Language

1 Touch “Subwoofer” to set the

subwoofer connection status.

Set to “ON” if a subwoofer is connected, or “OFF” if not.

2 Touch “Listening Position” to set the

listening position.

Set to “Front L” if your listening position is front left, or “Front R” if front right.

3 Touch “Language” to set the display

language.

Touch repeatedly until the desired language (English/Spanish/Russian) appears.

4 Touch “OK.”

The setting is complete.

This setting can then be further configured in the setting menu.

• For details on setting the subwoofer connection status, see page 56.

• For details on setting the listening position, see “Optimizing sound for the listening position — Intelligent Time Alignment” on page 48.

• For details on setting the display language, see page 53.

OFF / ON

Front L / Front R

English

Preparing the card remote commander

Before using the card remote commander for the first time, remove the insulation film.

Basic Operations

Using the navigation function

Connect the navigation module to the car dock.

For details, see the supplied installation/connection manual.

Press (TOP), then touch in the top menu.

The display to select the view mode appears. The view mode options are as follows. “Navigation Only”: Shows the navigation

display only. “Dual Screen Navi + A/V (Large)”: Shows the current audio/video source on the navigation display. “Dual Screen Navi + A/V (Small)”: Shows the key of the current audio/video source on the navigation display.

Touch the desired view mode. When selecting “Navigation only”

The navigation display appears, and you can then use the navigation function.

When selecting “Dual Screen Navi + A/V (Large)” or “Dual Screen Navi + A/V (Small)”

The display to select the position of the audio/ video source and keys appears.

1 Touch the desired position. 2 Touch the display in the navigation area.

The audio/video source and keys disappear, and you can then use the navigation function.

Navigation

Only

Upper Left

Back

Lower Left

ATT

Dual Screen

Navi + A/V

(Large)

Select screen position.

Dual Screen

Navi + A/V

(Small)

Upper Right

Lower Right

Top

12:0015

For further details on navigation operation, refer to the leaflet (supplied by TomTom) for the navigation module.

Notes

• During navigation operation, operation sound is not output even if “Beep” is set to “ON.”

• The navigation operation cannot be performed by the card remote commander.

• The voice guidance volume is independent of the regular volume.

To switch to the current audio/video source

Press and hold (TOP). To switch back to the navigation mode, press and hold (TOP).

When “Dual Screen Navi + A/V (Large)” or “Dual Screen Navi + A/V (Small)” is selected as a view mode

You can also switch to the current audio/video source by the following method. For “Dual Screen Navi + A/V (Large),” touch the audio/video source area. For “Dual Screen Navi + A/V (Small),” touch . To switch back to the navigation mode, touch “Navi” in the reception/playback display.

continue to next page t

To disconnect the navigation module

Press the button on the car dock to release the navigation module, then remove.

Listening to the radio

Touch “Source List,” then “Tuner.”

From the top menu, touch “AV Source,” then “Tuner.” The radio reception display appears.

Touch “Band.”

The band list appears.

Source List

ATT

P1 P2 P3

P4 P5 P6

ATT

Band

Receive

Navi

Preset

List

Navi

BTM

Memory

Top

PTY List

12:0015

Top

FM2 FM3 AM2

FM1

Receive

Band

Touch the desired band (“FM1,” “FM2,” “FM3,” “AM1” or “AM2”).

Touch “Band” to close the band list.

Perform tuning.

To tune automatically

Touch

./>.

Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.

To tune manually

Touch

m/M repeatedly until the desired frequency is received.

To skip frequencies continuously, touch and hold

m/M.

AM1

Preset

List

PTY List

12:0015

Reception controls

Touch the display if the reception controls are not shown.

2 4

Source List Navi

567

ATT

Receive

Band

8 9 0

Preset

List

Top

PTY List

12:0015

No. Item Touch to

1 “Source List” open the source list. (page 13) 2 “ATT” attenuate the sound. To cancel, touch again. 3 “Navi” enter the navigation mode. (page 17) 4 “Top” open the top menu. (page 13) 5 m/M tune manually.

Touch and hold to skip frequencies continuously.

6 ./> tune automatically. 7 “Band” open the band list and change the band. 8 “Receive Menu” open the receive menu, which contains the following.

• “Mono”: Touch to activate the monaural mode if FM reception

is poor. To restore stereo reception, select “OFF.”

• “Local”: Touch to only tune into stations with stronger signal.

To tune normal stations, select “OFF.”

• “IF”: Touch to set to “Wide” to hear FM stereo broadcasts in

stereo and with full frequency reception. To narrow the reception frequency automatically to eliminate noise, select “Auto.”

9 “Preset List” list up stored stations, or store stations. (page 24) 0 “PTY List” open the PTY list. (page 25)

Indications during reception

Source List Navi

ATT

Receive

Preset

List

Band

A Current source icon* B Band number, Preset number*2, Frequency/status

Top

C Volume level* D Setting status (CSO, EQ7, RBE)

*1 Appears only when the controls are shown. *2 Appears only when the station stored in memory is

received.

*3 When ATT is activated, appears.

PTY List

12:0015

Playing discs

Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.

XNV-770BT

Press Z on the main unit.

The front panel opens automatically.

Insert the disc (label side up).

The front panel closes automatically, then playback starts.

XNV-660BT

Insert the disc (label side up).

Playback starts automatically.

If the DVD menu appears

Touch the item in the DVD menu directly. You can also use the menu control panel which can be shown by touching the display in a place other than menu item area. Touch b/v/V/B to move the cursor, then “Enter” to confirm. If the menu control panel does not appear by touching the display, use the card remote commander.

About the DVD menu

A DVD is divided into several sections, which make up a picture or music feature. These sections are called “titles.” When you play a DVD that contains several titles, you can select a desired title using the DVD’s top menu. For DVDs that allow you to select items such as subtitle/sound language(s), select these items using the DVD menu.

If the disc contains JPEG files

The slide show starts automatically.

To stop playback

Press (SOURCE/OFF) for 1 second.

Note

Discs in DTS format are not supported. The sound is not output if the DTS format is selected.

To eject the disc

XNV-770BT

1 Press Z on the main unit.

The front panel opens automatically, then the disc is ejected.

2 Press Z on the main unit to close the front panel.

Note

The front panel closes automatically after the caution alarm sounds.

XNV-660BT

Press Z on the main unit.

Playback controls

Touch the display if the playback controls are not shown.

Common to all discs/formats

2 4

Source List

ATT Top

Source List

ATT Top

PBC Panel

Source List

ATT

DVD

Control

Navi

Play Menu

SHUF

Play Menu

SHUF

Top

Source List

12:0015

ATT Top

DVD

Control

Navi

Play Menu SHUF

12:0015

MPEG-4

Source List

12:0015

ATT

Album

List

Navi

Top

Play Menu SHUF

12:0015

Album

ZAP

Play Menu

List

SHUF

12:0015

continue to next page t

No. Item Touch to

1 “Source List” open the source list. (page 13) 2 “ATT” attenuate the sound. To cancel, touch again. 3 “Navi” enter the navigation mode. (page 17)

4 “Top” open the top menu. (page 13) 5 ./> skip a chapter/track/scene/image/file.

Touch and hold momentarily to reverse/fast-forward the video; and then repeatedly to switch the speed (× 2 t ×12 t ×120 t ×2…)*

. To cancel, touch u. Touch and hold to reverse/fast-forward the audio track. During pause, touch and hold down > to play the video in

slow motion. To cancel, release the key.

6 u pause/resume play after pause. 7 “Play Menu” open the play menu, which contains the following.

• “Repeat”/“Shuffle” (page 27)

• “Dolby D Level” (DVD VIDEO playback only) (page 26)

• “Stereo” (VCD/CD/MP3/WMA/AAC playback only)

(page 26)

• “Image Turn” (JPEG playback only): Touch to rotate an

image left/right.

• “Audio” (MPEG-4 playback only) (page 26)

8 “DVD Control” open the DVD control menu, which contains the following.

• “Audio”: Touch repeatedly to select the audio language/

format. (page 26)*

• “Subtitle”: Touch repeatedly to turn off/select the subtitle

language.*

• “Angle”: Touch repeatedly to change the viewing angle.*

• “Top Menu”: Touch to open the top menu on the DVD.*

• “Menu”: Touch to open the menu on the disc.*

2*3

9 “PBC Panel” show the control panel for the PBC menu. (page 25) 0 “Album” –/+ skip an album (folder) of MP3/WMA/AAC/JPEG/MPEG-4. qa “List” list up tracks/images/video files. (page 36) qs “ZAP” enter the ZAPPIN mode. (page 36)

*1 The speed depends on the format or the recording method. *2 Unavailable depending on the disc. *3 When the 4-digit input prompt appears, input the language code (page 73) for the desired language.

Note

If the disc contains multiple file types, only the selected file type (audio/video/image) can be played. For details on how to select the file type, see “Selecting a file type” on page 36.

Notes on JPEG playback

• If a large-sized image is rotated, it may take longer to display.

• Progressive JPEG files cannot be displayed.

Indications during playback

Touch the display to show the indications. For audio discs, some indications are always shown during playback.

Source List

B C

D E F

Source List

MPEG-4

ATT

Navi

Top

A Current source icon B Volume level* C Format, Playback status, Elapsed playback

time* number* (CSO, EQ7, RBE)

D Playback status, Elapsed playback time* E Track name, Album name, Artist name F Album artwork display*

, Chapter/title/album (folder)/track

3*4

, Audio Format*5, Setting status

G Format, Track number, Album number*7, Setting

DVD

Play Menu

Control

SHUF

12:0015

ATT

ZAP

Album

Top

Navi

Play Menu

List

SHUF

12:0015

status (CSO, EQ7, RBE)

*1 When ATT is activated, appears. *2 During JPEG playback or VCD playback with the PBC

function, no indication appears.

*3 Indications differ depending on the disc/format. *4 When playing a VCD with the PBC function (page 25),

no indication appears.

*5 DVD only. *6 The recommended size is from 240 × 240 to 960 × 960

pixels.

*7 MP3/WMA/AAC only.

Advanced Operations — Radio

RDS

Storing and receiving stations

Caution

When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Touch “Source List,” then “Tuner.”

To change the band, touch “Band,” then select the desired band (“FM1,” “FM2,” “FM3,” “AM 1” or “AM2”).

2 Touch “Preset List,” then “BTM.”

The unit stores stations in order of frequency in the preset list (“P1” to “P6”). A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, touch “Preset List.”

2 Touch “Memory,” then touch the

number in the list (“P1” to “P6”).

The number and the confirmation display appear on the display.

3 Touch “Yes.”

The station is stored.

Note

If you try to store another station on the same number, the previously stored station will be replaced.

Overview

FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal.

Display items

, RDS*

ATT

Receive

Band

Source List Navi

A Band number, Preset number, Frequency B Stereo*

Preset

List

Top

PTY List

12:0015

C Program service name D Clock display

*1 During FM reception. *2 During RDS reception.

RDS services

This unit automatically provides RDS services as follows:

Receiving stored stations

1 Select the band, then touch “Preset

List.”

2 Touch the desired number (“P1” to

“P6”).

PTY (Program Types)

Displays the currently received program type. Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets the clock.

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting RDS data.

Selecting PTY

1 During FM reception, touch “PTY List.”

The PTY list appears if the station is transmitting PTY data. To scroll the list, touch v/V.

2 Touch the desired program type.

The unit searches for a station broadcasting the selected program type.

To close the PTY list, touch “PTY List.”

Type of programs

“News” (News), “Information”

(Information), “Sports” (Sports), “Talk” (Talk), “Rock” (Rock), “Classic Rock” (Classic Rock), “Adult Hits” (Adult Hits),

“Soft Rock” (Soft Rock), “Top 40” (Top 40), “Country” (Country), “Oldies” (Oldies), “Soft” (Soft), “Nostalgia” (Nostalgia), “Jazz” (Jazz), “Classical” (Classical), “Rhythm and Blues” (Rhythm and Blues), “Soft R & B” (Soft Rhythm and Blues), “Foreign Language” (Foreign Language), “Religious Music” (Religious Music), “Religious Talk” (Religious Talk), “Personality” (Personality), “Public”

(Public), “College” (College), “Weather” (Weather)

Notes

• You cannot use this function in countries/regions

where no PTY data is available.

• You may receive a different radio program from the

one you select.

Setting CT

1 Set “CT” to “ON” in setting (page 53).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

Advanced Operations — Discs

Using PBC functions — Playback control

The PBC menu interactively assists with operations while a PBC compatible VCD is played.

1 Start playing a PBC compatible VCD.

The PBC menu appears.

2 Touch “PBC Panel.”

The menu control panel appears.

3 Touch the number keys to select the

desired item, then “Enter.”

4 Follow the instructions in the menu for

interactive operations.

To return to the previous display, press O. To hide the controls, touch “Close.”

Playing without the PBC function

1 While the unit is off, touch “Source

List,” then .

2 Touch “Visual.”

The visual setting menu appears.

3 Touch v/V to scroll, then “Video CD

PBC” to set to “OFF.”

4 Start playing a VCD.

The PBC menu does not appear during playback.

Notes

• The items on the menu, and operation procedures

differ depending on the disc.

• During PBC playback, the track number, playback

item, etc., do not appear in the playback display.

• Resume playback is unavailable during playback

without PBC.

Configuring audio settings

Note

Discs in DTS format are not supported. The sound is not output if the DTS format is selected.

Changing the audio language/ format

The audio language can be changed if the disc is recorded with multilingual tracks. You can also change the audio format when playing a disc recorded in multiple audio formats (e.g., Dolby Digital).

1 During playback, touch “DVD Control.” 2 Touch “Audio” repeatedly until the

desired audio language/format appears.

Audio language

Source List

Audio 1: English Dolby D 3/2.1

Audio Subtitle Angle MenuTop Menu

ATT

DVD

Control

Audio format/channel numbers*

The audio language switches among the available languages. When the 4-digit input prompt appears, input the language code (page 73) for the desired language. When the same language is displayed two or more times, the disc is recorded in multiple audio formats.

* The format name and channel numbers appear as

follows. Example: Dolby Digital 5.1 ch

Rear component × 2

Navi

Top

Play Menu

SHUF

12:0015

Dolby D 3 / 2 . 1

Changing the audio channel

MPEG-4

When playing VCD/CD/MP3/WMA/AAC/ MPEG-4, you can select the right or left channel sound to listen through both right and left speakers. The options are indicated below.

“2-Ch”: Standard stereo sound (default) “L-Ch”: Left channel sound (monaural) “R-Ch”: Right channel sound (monaural)

For VCD/CD/MP3/WMA/AAC

1 During playback, touch “Play Menu,”

then “Stereo” repeatedly until the desired audio channel appears.

For MPEG-4

1 During playback, touch “Play Menu,”

then “Audio” repeatedly until the desired audio channel appears.

To close the play menu, touch “Play Menu.”

Note

You may not be able to change the audio setting depending on the disc.

Tip

The operation by the card remote commander (pressing (AUDIO) repeatedly) is also available.

Adjusting the audio output level — Dolby D level

You can adjust the audio output level for a DVD recorded in Dolby Digital format, to reduce the volume level differences between disc and source.

1 During playback, touch “Play Menu.” 2 Touch the “Adjust” box to set to “ON.” 3 Touch –/+ repeatedly to adjust the

output level.

The output level is adjustable in single steps, between –10 and +10.

To close the play menu, touch “Play Menu.”

Front component × 2 + Center component × 1

LFE component × 1

To close the DVD control menu, touch “DVD Control.”

Locking discs — Parental control

* Excluding DVD-R/DVD-R DL/DVD-RW in VR mode.

You can lock a disc, or set playback restrictions according to a predetermined level such as viewer age. Restricted scenes can be blocked or replaced with different scenes when a parental control compatible DVD is played.

Activating parental control

1 While the unit is off, touch “Source

List,” then .

2 Touch “Visual.”

The visual setting menu appears.

3 Tou ch v/V to scroll, then “DVD

Parental Control.”

The password setting display appears.

4 Touch the number keys to enter your

password, then “OK.”

5 To confirm, touch the number keys to

reenter your password, then “OK.”

The setting is complete.

To delete an entered number, touch “Clear.” To return to the previous display, touch “Back.”

Deactivating parental control

1 Follow steps 1 to 3 above.

The parental unlock display appears.

2 Touch the number keys to enter your current

password. “Parental Unlocked” appears, and the parental control is deactivated.

Changing the password

Deactivate the parental control, then activate again using the new password.

Changing the area and its movie rating level

The restriction levels can be set depending on the area and its movie ratings.

1 While the unit is off, touch “Source

List,” then .

2 Touch “Visual.”

The visual setting menu appears.

3 Touch v/V to scroll, then “DVD

Parental Area.”

When parental control is already activated, the display to enter your password appears. To change the setting, enter your password. The options appear.

4 Touch the desired area to apply its

movie ratings.

When you select “Other,” enter the area code selecting from “Area code list” on page 73, using the number keys.

5 Touch “DVD Parental Rating.”

The options appear. The lower the number, the stricter the restriction level.

6 Touch the desired rating.

The setting is complete.

To return to the previous display, touch “Back.”

Repeat and shuffle play

1 During playback, touch “Play Menu,”

then the “Repeat” or “Shuffle” box repeatedly until the desired option appears.

Source List

MPEG-4

ATT

Navi

Top

Chapter OFF ON

Repeat Shuffle Adjust Dolby D Level 0

DVD

Control

Play Menu

SHUF

12:0015

Repeat or shuffle play starts.

To close the play menu, touch “Play Menu.”

continue to next page t

The repeat options and switching order of each disc/format are indicated below.

Disc/format Options

“OFF”: Returns to normal play

mode. “Chapter”: Repeats the current chapter. “Title”: Repeats the current title.

“OFF”: Returns to normal play

mode. “Track”: Repeats the current track.

“OFF”: Returns to normal play mode. “Track”: Repeats the current track. “Album”: Repeats the current album (folder).

“OFF”: Returns to normal play mode. “Image”: Repeats the current image. “Album”: Repeats the current album.

“OFF”: Returns to normal play mode.

MPEG-4

“Movie”: Repeats the current video file. “Album”: Repeats the current album (folder).

The shuffle options and switching order of each disc/format are indicated below.

Disc/format Options

“OFF”: Returns to normal play

mode.

“Title”: Plays chapters in current title in random order.

“OFF”: Returns to normal play

mode. “Disc”: Plays tracks in current disc in random order.

“OFF”: Returns to normal play mode. “Album”: Plays tracks/images/ video files in current album (folder) in random order.

*1 Available only when playing version 1.0/1.1 VCD,

or version 2.0 VCD without PBC function.

*2 Excluding DVD-R/DVD-R DL/DVD-RW in VR

mode.

Direct search play

You can directly locate a desired point by specifying the title number, chapter number, etc.

1 During playback, press the number

buttons on the card remote commander to enter an item (track, title, etc.) number, then press (ENTER).

Playback starts from the beginning of the selected point.

The search items of disc/format are as follows.

DVD: Title or chapter* VCD*2/CD/MP3/WMA/AAC: Track JPEG: Image MPEG-4: File

*1 The search item depends on the setting. *2 Available only when playing a VCD without PBC

function.

Setting the search item (DVD only)

You can set the search item (title or chapter) for DVD playback.

1 Touch “Source List,” then . 2 Touch “Visual.”

The visual setting menu appears.

3 Touch v/V to scroll, then “DVD Direct

Search” to set to “Chapter” or “Title.”

The setting is complete.

To return to the previous display, touch “Back.”

MPEG-4

USB Device Operations

For details on the compatibility of your USB device, visit the support site.

Support site

http://esupport.sony.com http://www.sony.com/mobileAV

• MSC (Mass Storage Class) and MTP (Media Transfer Protocol) type USB devices compliant with the USB standard can be used.

• Corresponding codec is MP3 (.mp3), WMA (.wma), AAC (.m4a), JPEG (.jpg) and MPEG-4 (.mp4).

• Backup of data in a USB device is recommended.

Notes

• Connect the USB device after starting the engine. Depending on the USB device, malfunction or damage may occur if it is connected before starting the engine.

• A large-sized file may take time to start playing back.

Notes on use

• Do not use USB devices so large or heavy that they

may fall down due to vibration, or cause a loose connection.

• Do not leave a USB device in a parked car, as

malfunction may result.

• This unit cannot recognize USB devices via a USB

hub.

Notes on playback

• If a USB device contains multiple file types, only the

selected file type (audio/video/image) can be played. For details on how to select the file type, see “Selecting a file type” on page 36.

• Displayed indications will differ, depending on the

USB device, recorded format and settings. For details, visit the support site.

• The maximum number of displayable data is as

follows. – folders (albums): 256 – files (tracks): 2,000

• It may take time for playback to begin, depending on

the amount of recorded data.

• During playback or fast-forward/reverse of a VBR

(Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately.

• Playback of a lossless compression file is not

supported.

Playing a USB device

1 Remove the cap from the USB

connector, and connect the USB device to the USB connector.

Playback starts automatically. If a USB device is connected, to start playback, touch “Source List,” then “USB/ iPod.”

For details on the location of the USB connector, see the supplied installation/connections manual.

About the controls and indications during playback

You can control USB playback in the same way as disc playback. For details, see “Playback controls” on page 21. For details on indications during playback, see “Indications during playback” on page 23.

To stop playback

Press (SOURCE/OFF) for 1 second.

To disconnect the USB device

Stop playback, then disconnect. Do not disconnect during playback, as data in the USB device may be damaged.

Repeat and shuffle play

1 During playback, touch “Play Menu,”

then the “Repeat” or “Shuffle” box repeatedly until the desired option appears.

Repeat or shuffle play starts.

The repeat options are as follows.

“OFF”: Returns to normal play mode. “Track”/“Image”/“Movie”*

current track/image/video file.

“Album”: Repeats the current album (folder). “Drive”*

: Repeats the current drive.

The shuffle options are as follows.

“OFF”: Returns to normal play mode. “Album”: Plays tracks/images/video files in the

current album (folder) in random order.

*1 Options depend on the file type. *2 When two or more drives are created on the USB

device.

To close the play menu, touch “Play Menu.”

: Repeats the

Enjoying music according to your mood — SensMe™

Sony’s unique “SensMe™ channels” and “SensMe™ mood” features automatically group tracks by channel or mood, and allow you to enjoy music intuitively.

Before using the SensMe™ function

The following is the basic procedure required to enjoy the SensMe™ function on the unit.

1Installing “SensMe™ Setup” and

“Content Transfer” in your computer

First install “SensMe™ Setup” and “Content Transfer” from the supplied CD-ROM.

™

Content

SensMe

Transfer

Setup

2Registering a USB device using

“SensMe™ Setup”

Connect a USB device to your computer, and perform registration using “SensMe™ Setup” to enable the SensMe™ function on this unit.

3 Transferring tracks to the USB device

using “Content Transfer”

In order to group tracks by channel or mood, track sound patterns need to be analyzed by 12 TONE ANALYSIS, which is loaded in “Content Transfer.” With the USB device connected to your computer, drag and drop tracks from Windows Explorer or iTunes, etc., to “Content Transfer.” Both analysis and transfer of tracks will be performed by “Content Transfer.”

Content Transfer

4 Connecting the USB device and

enjoying the SensMe™ function on the unit

Connect the set up USB device. You can then enjoy “SensMe™ channels” or “SensMe™ mood” on this unit.

SensMe™

™

SensMe

Setup

Tip

Registration can be performed either along with the installation procedure or after installation.

Installing “SensMe™ Setup” and “Content Transfer” in your computer

Use of the supplied software (“SensMe™ Setup” and “Content Transfer”) is required to enable the SensMe™ function on this unit. Install the software in your computer from the supplied CD-ROM.

1 Insert the supplied CD-ROM into your

computer.

The Installation Wizard runs automatically.

2 Follow the on-screen instructions to

complete the installation.

+ 202 hidden pages