Sony XM-1002-HX Marketing Specifications

2000 MOBILE PRODUCT GUIDE – PART 2

Specifications

Circuit System

Inputs

Outputs

Speaker Impedance

Rated Outputs (at 14.4 VDC)

Hi-Current/Hi-Voltage:

Frequency Response Harmonic Distortion Input Level Adjustment Range

High-Pass Filter Low-Pass Filter Low Boost Power Requirements Power Supply Voltage Current Drain

Dimensions (w/h/d) Weight

Supplied Accessories

OTL (output transformerless) Circuit Pulse Power Supply

RCA Pin Jacks High Level Input Connector

Speaker Terminals – through out pin jacks

1-8 ohms (stereo) 2-8 ohms (when used as bridging amplifier)

50/100 W x 2 (20-20 kHz, 0.04% THD), at 4 Ω ) 70/140 W x 2 (20-20 kHz, 0.1% THD), at 2 Ω ) 140/280 W x 1 (20-20 kHz, 0.1% THD), at 4 Ω )

5-50 Hz (+0.5/-3 dB)

0.005% or less (at 1 kHz, 4 Ω)

0.2-4.0 V (RCA pin jack);

0.4-8.0 V (High level input) 50-200 Hz, -12 dB/oct 50-200 Hz, -12 dB/oct 0-10 dB (40Hz) 12 V DC car battery (negative ground)

10.5-16 V At rated output: 26A (4 ohm hi voltage mode) Remote input: 2 mA

Approx. 282 x 50 x 320 mm (11

/8 x 2 x 125/8 in.) (not incl. projecting parts and controls)

3.3 kg (7 lb. 4 oz.) (not including accessories)

Mounting Screws (4); Terminal Cap (1)

XM-1002HX

2/1 Channel Amplifier

• MOSFET Switching Power Supply

• Switchable Hi Power/Hi Current Mode

• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter

• 40 Hz EQ Boost, Hi Level In

• RCA Passthrough

• 100 W x 2 Ch at 0.04% THD

• 280 W x 1 Ch at 0.1% THD

• 140 W x 2 into 2 ohms at 0.1% THD

• Discrete Dual Differential Inputs

• Discrete MOSFET Outputs

Design and specifications subject to change without notice.

2000 MOBILE PRODUCT GUIDE – PART 2

XM-1002HX

2/1 Channel Amplifier