3-218-336-12(1)
DAB/FM CLOCK
RADIO
Operating Instructions
Dream Machine is a trademark of Sony Corporation.
XDR-C705DAB
© 2007 Sony Corporation Printed in China
BRIGHTNESS
DISPLAY MENU SLEEP ALARM VOL DAB/FM
PRESET
TUNE/SELECT FM SCAN
DOWN UP
ENTER
SNOOZE/
SLEEP OFF
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
There is a tactile dot beside VOL +.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
Do not install the appliance in a confined space, such as a bookcase or built-in
cabinet.
To reduce the risk of fire or electric shock, do not place objects filled with
liquids, such as vases, on the apparatus.
Connect the apparatus to an easily accessible AC outlet. Should you notice an
abnormality in the apparatus, disconnect the main plug from the AC outlet
immediately.
Notice for the customer in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku,
Tokyo, Japan. The Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For
any service or guarantee matters please refer to the addresses given in separate
service or guarantee documents.
Features
• DAB(Band-III)/FM 2-band digital clock radio
• Large clock display and 16 × 2 lines character dot display for text information
• Brightness control
• 4 alarms with various alarm mode; weekdays, weekends, daily and once
• 20 memory presets (10 DAB, 10 FM)
• Current time and Summer time adjustment synchronized with DAB data
• Sleep timer
ALARM RESET
RADIO
VOL
ON/OFF
Wire antenna
AC power
cord
Set the clock
Do the following if DAB broadcast is not available (depending on area). The time
setting mode by DAB becomes invalid.
1 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
select the “Set clock,” and then press ENTER.
The hour indication will be displayed as follows.
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
or ENTER
Time PM08 :56
2 Press UP(B)/DOWN(b)•TUNE/SELECT to set the hour, and
then press ENTER.
3 Repeat step 2 to set the minute, year, month and day.
After setting the time, the clock starts from 0 seconds.
Notes
• If you do not operate within 7 seconds while setting the clock, the clock setting
mode will be cancelled.
• Setup time for this operation is adjusted automatically when the customer
operates the set while receiving DAB service.
To change the clock display
You can choose the clock display 12-hour system (default) and 24-hour system.
1 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
show the “Clock display” in the display, and then press ENTER.
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired
clock display, and then press ENTER.
The clock display changes by turns (12-hour system:
“AM 12:00” = midnight, 24-hour system: “0:00” = midnight.)
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
Clock Display
12hour system
Time adjustment about
Summer time
This unit’s time adjustment will be done only when receiving DAB service.
Receive DAB service for at least one minute to renew the time into Summer time.
Setting the brightness of the
display
Press and hold DISPLAY•BRIGHTNESS for few seconds to change the
brightness. Repeat this step, to select high, middle or low for the display
according to your preferences.
Improving the reception
DAB Band-III/FM:
Extend the wire antenna fully to increase reception sensitivity.
Operating the radio
The unit can receive DAB services and FM stations.
1 Press RADIO ON/OFF•ALARM RESET to turn on the radio.
When the unit is turned on again, the last band you listened to is received.
2 Press DAB/FM repeatedly to select the desired band.
Each press changes the band as follows:
DAB FM
3 Press the UP(B)/DOWN(b)•TUNE/SELECT to tune to the
desired service or station.
If you are selecting DAB, press ENTER.
4 Adjust the volume using VOL +/–.
Note in FM usage
The frequency step is set to 0.05 MHz on FM.
Notes in DAB usage
• If there are no services, you can choose only MANUAL mode.
•“Station not available” appears when the ensemble for the selected service
cannot be received.
About the SC (Secondary Component)
If the selected primary component has a secondary component, “ii” appears in
the display.
SVC2
SVC1
Press UP(B)/DOWN(b)•TUNE/SELECT and ENTER to receive the desired
secondary component. “II” appears while the secondary component is received.
Note
When the selected secondary component is finished, the unit returns
automatically to the primary component.
Scan tuning (for FM)
The unit will automatically scan FM station.
1 Press RADIO ON/OFF•ALARM RESET to turn on the radio.
2 Press DAB/FM to select the FM band.
3 Press UP(B)/DOWN(b)•TUNE/SELECT to choose the
direction, and then press ENTER•FM SCAN.
UP(B): Scans to the higher frequency.
DOWN(b): Scans to the lower frequency.
Scanning starts from the frequency being tuned in. When a station is
received, scanning stops.
4 If necessary, press UP(B)/DOWN(b)•TUNE/SELECT to tune
in to the station more precisely.
5 Adjust the volume using VOL +/–.
Setting the alarm
This unit allows you to set four alarm programmes (ALARM 1 - 4).
The alarm time can be set for every programme and the alarm sound is selectable
from radio or buzzer.
The alarm will come on at the same time everyday. Before setting the alarm,
make sure to set the clock (See “Setting the Clock”.)
To set the alarm time
1
Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
select “Alarm settings,” and then press ENTER.
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired
alarm (1 - 4) and then press ENTER.
When the alarm is not set up, “Not in use” appears in the display.
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the alarm
mode (DAB, FM and buzzer) and then press ENTER.
“Set alarm” appears in the display.
If you select DAB or FM, “Set volume” appears in the display. In this case,
repeat this step and adjust the volume.
4 Press UP(B)/DOWN(b)•TUNE/SELECT to select “ON,” and
then press ENTER.
The alarm time appears in the bottom of the display, and the arrow appears in
both sides of the hour indicator.
5 Press UP(B)/DOWN(b)•TUNE/SELECT to set the hour, and
then press ENTER.
The arrow appears in both sides of the minute indicator.
6 Repeat step 5 to set the minute and the alarm mode.
The alarm mode as follows:
Weekdays: Every Monday to Friday
Weekends: Every Saturday and Sunday
Daily: Everyday from Sunday to Saturday
Once: Once only
If you select “Once” repeat step 5 to set the year, month and day.
7 Press ENTER.
The setting is complete.
Tip
You can set the alarm using ALARM button on the unit.
Press ALARM and follow after steps 2.
Notes
•The default alarm time for radio and buzzer is the current time of the clock.
• If you quit during the alarm setting, after about 7 seconds the previous display
will return.
• If a second alarm sounds during a first (or the snooze function is active), the
second alarm takes priority.
• If the alarm sounds at the same time (or the snooze function is active), the large
alarm number takes priority.
•When Summer time begins, it is necessary to adjust the current time by
manually (see “Time adjustment about Summer time” ).
To set the alarm on/off
1 Follow steps 1 to 4 in “To set the alarm time.”
“Set alarm” appears in the display.
2 Press UP(B)/DOWN(b)•TUNE SELECT to set the alarm
“ON” or “OFF,” and then press ENTER.
ON: “ALARM (1-4)” appears in the display when the alarm setting is
complete.
OFF: “ALARM (1-4)” turn off from the display.
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
Set Alarm
OFF
3 Follow after step 5 in “To set the alarm time.”
The setting is complete.
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
21-07-2007
To doze for a few more minutes
Press SNOOZE/SLEEP OFF.
The radio or buzzer turns off but will automatically come on again after about
5 minutes. (while the snooze function is operating, “Snooze” flashes in the
display.)
To stop the alarm
Press RADIO ON/OFF• ALARM RESET to turn off the alarm.
The alarm will come on again at the same time the next day.
Initial setting for the clock
radio
When the first time after purchase, do the following.
1 Plug in the unit.
“Setting clock...” appears in the display, and DAB data adjust the clock as it
is received. When finished, the current time appears in the display.
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
Setting clock...
2 Press RADIO ON/OFF•ALARM RESET to turn on the radio.
The unit will automatically scan and create a list of receivable DAB
broadcasts.
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
Sony DAB Radio
Notes
•When the clock will not be set in 3 minutes, “AM 12:03 clock not set...”
appears in the display (see “Setting the clock.”)
• If no broadcasts are found by the DAB scan, “Station not available” appears
in the display.
Presetting your favourite
services or stations
You can preset 10 services in DAB and 10 stations in FM.
Presetting
1 Follow steps 1 to 3 in “Operating the radio” and manually tune in
to the broadcast you wish to preset.
2 Press PRESET.
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the
favourite number to preset, then press and hold PRESET.
“saved” appears for 7 seconds in the display and the service or station is
stored. (DAB services are stored with a service label.)
Notes
•To preset another service or station, repeat these steps.
•To change the preset service or station, tune in to the desired service or
station and repeat steps 2 and 3. The new service or station will replace the
previous service or station.
•When the service or station is not registered, “Empty preset” appears in the
display.
• If you do not operate within 7 seconds during the above steps, the current
mode will be cancelled.
Tuning in to a preset
1 Press PRESET.
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired
preset station and then press ENTER.
Notes
•When the service or station is not registered, “Empty preset” appears in the
display.
• If you do not operate within 7 seconds during the above steps, the current
mode will be cancelled.
services or stations
service or station
Setting the Sleep Timer
You can enjoy falling asleep to the radio using the built-in sleep timer that turns
off the radio automatically after a preset duration.
1 Press SLEEP while the unit is turned on.
“Sleep” appears in the display.
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
Sleep
60 minutes
2 Press SLEEP to set the sleep timer duration.
Each time you press SLEEP, the duration changes as follows:
The unit automatically turns off when the duration time is passed.
Press
ENTER or 7 seconds after you have finished setting the duration setting
and released SLEEP, “activated” appears in the display and then the sleep timer
starts. The unit will play for the duration you set, and then shut off.
To change the Sleep Timer setting
Repeat step 2 to select the desired sleep timer setting even after the sleep timer
has been activated.
To deactivate the Sleep Timer
•Press SNOOZE/SLEEP OFF, the unit will turn off.
•Press SLEEP to set the sleep timer “OFF,” only the sleep timer will be
cancelled (the radio keeps ON).
Continue to next page
Other useful functions for
DAB
Changing the display
To change the display mode, press DISPLAY•BRIGHTNESS during DAB
reception.
The selected display mode remains even if you turn the unit off and on again, or
change the band.
The display can be up to 16 characters long.
Each time you press DISPLAY•BRIGHTNESS, the bottom in a display changes
as follows:
Dynamic
SVC1
EUROPEAN EQUITIE
PTY
SVC1
Pop Music
Other useful functions
To display the softwear version
Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to select “Sw version.”
The current softwear version of the unit appears in the display.
To reset the unit
When the radio fails to function properly, follow as:
1
Press and hold MENU and ENTER at the same time for a few
seconds.
“Press ENTER to confirm reset” appears in the display.
2 Press ENTER.
The clock settings, the services and stations you have preset, etc., will revert
to the factory preset.
Signal strength
SVC1
Sig strength 100
BIT rate and mono/stereo
SVC1
126kbps Stereo
Frequency
SVC1
11D 222.06MHz
Ensemble
SVC1
DAB ENSEMBLE ONE
Date
SVC1
25-07-2007
Station order
This function enables you to choose how the stations are arranged when selecting
a station.
There are 4 modes available Alphanumeric, Favourite station, Active stations and
Trim stations.
• Alphanumeric(default):
•Favourite: When this setting is switched on, after a period of time the
• Active stations: When this setting is switched on the display will show only
•Trim stations: When this setting is switched on the unit will delete the
To select a stored service in alphabetical order.
most listened to stations will move to the top of the station
list and will be marked with the heart symbol.
Your ten favourite stations will be displayed.
those that a signal can be found for.
stations that are not currently being received.
1 Follow steps 1 and 2 in “Operating the radio” and select DAB.
2 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
select “Station order,” and then press ENTER.
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired
mode, and then press ENTER.
Manual tune
This function allows you to tune and add the various DAB Band-III channels to
your station list.
UK DAB stations located in the range 11B to 12D. This function can be used to
assist the positioning of the antenna or the unit to obtain the optimum reception
for a specific channel / frequency.
1 Follow steps 1 and 2 in “Operating the radio” and select DAB.
2 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
select “Manual tune,” and then press ENTER.
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired
DAB channel, and then press ENTER.
The signal strength bars will go up and down showing the changing signal
strength as you adjust the reception.
4 Press ENTER.
A new DAB channel is added to the station list.
DRC Value (DYNAMIC RANGE CONTROL)
DRC can make quieter sounds easier to hear when the unit is used in a noisy
environment.
When DAB broadcasts in dynamic range compression, you can adjust the
dynamic range by this unit.
1 Follow steps 1 and 2 in “Operating the radio” and select DAB.
2 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
select “DRC value” and then press ENTER.
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the DRC
level.
The DRC level changes as follows:
0(default) 1
1
/2
4 Press ENTER.
Notes
• DRC is effective only in dynamic range compression broadcast.
•When you adjusted the DRC level, volume can be heard more loudly.
Autoscan UK / Autoscan full
These function allows you to automatically scan and create a list of receivable
DAB broadcasts.
If you use this unit in the UK, “Autoscan UK” is recommended.
1 Follow steps 1 and 2 in “Operating the radio” and select DAB.
2 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
select “Autoscan UK” or “Autoscan full,” and then press ENTER.
“Scanning” appears in the display, scan and create a list of receivable DAB
broadcasts.
Autoscan takes about 30 - 90 seconds. When finished, the unit receives a stored
service in alphabetical order (see “Station order”.)
PTY (Programme Type)
This function indicates services in programme type, such as NEWS, SPORTS of
the PTY list, transmitted in the DAB.
If the received service or station does not transmit the programme type, “NO PTY
Data” appears.
Programme type Display
Undefined None
News News
Current Affairs Current Affairs
Information Information
Sport Sport
Education Education
Drama Drama
Culture Cultures
Science Science
Varied Varied Speech
Pop Music Pop Music
Rock Music Rock Music
Easy Listening Music Easy Listening
Light Classical Light Classics M
Serious Classical Serious Classics
Other Music Other Music
Weather Weather & Metr
Finance Finance
Children’s programmes Children’s Progs
Social Affairs Social Affairs
Religion Religion
Phone In Phone In
Travel Travel & Touring
Leisure Leisure & Hobby
Jazz Music Jazz Music
Country Music Country Music
National Music National Music
Oldies Music Oldies Music
Folk Music Folk Music
Documentary Documentary
Precautions
• Operate the unit only on the power sources specified in “Specifications”.
•The unit is not disconnected from the AC power source (mains) as long as it is
connected to the wall outlet, even if the unit itself has been turned off.
• Use the unit within a temperature range of 0°C to 40°C (32°F to 104°F). If it is
used in temperatures higher than this range, numbers may appear in the display
which have nothing to do with the frequency being received. If it is used in
temperatures lower than this range, the numbers displayed may change very
slowly. (These irregularities will disappear and there will be no damage to the
unit when the unit is used in the recommended temperature range.)
•
The nameplate indicating operating voltage, etc. is located on the bottom exterior.
•Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or
mechanical shock. Never leave in a car parked in the sun.
• Should any solid object or liquid fall into the unit, disconnect the AC power
cord and remove the batteries, and have the unit checked by a qualified
personnel before operating it any further.
• Allow adequate air circulation to prevent internal heat build-up. Do not place
the unit on a surface (a rug, blanket, etc.) or near materials (a curtain) that
might block the ventilation holes.
• Do not connect the antenna lead to the external antenna.
• Since a strong magnet is used for the speakers, keep away personal credit cards
using magnetic coding or spring-wound watches from the unit to prevent
possible damage from the magnet.
•To clean the casing, use a soft cloth dampened with a mild detergent solution.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local Civic
Office, your household waste disposal service or the shop where you purchased
the product.
If you have any questions or problems concerning your unit, please
consult your nearest Sony dealer.
product is disposed of correctly, you will help prevent potential
Troubleshooting
Should any problem persist after you have made the following checks, consult
your nearest Sony dealer.
Display is dim, or no indication is displayed.
•The unit is being used in extremely high or low temperatures or in a place with
excessive moisture.
Very weak or interrupted sound, or unsatisfactory reception.
• If you are in a building, listen near a window.
A station or service cannot be received when a PRESET recalls.
• The station or service has not been preset.
• Another station or service is preset. Preset the station or service again.
The preset services and stations may be initialized, if a maintenance service is performed.
Please note down of your settings in case you want to preset them again.
Specifications
Time display
12-hour system (default)
Frequency range
Band Frequency Channel step
DAB (Band-III) 174.928 - 239.200 MHz
FM 87.5 - 108 MHz 0.05 MHz
DAB (Band-III) frequency table (MHz)
No. Channel Frequency No. Channel Frequency
15A 174.928 20 9D 208.064
25B 176.640 21 10A 209.936
35C 178.352 22 10B 211.648
45D 180.064 23 10C 213.360
56A 181.936 24 10D 215.072
66B 183.648 25 11A 216.928
76C 185.360 26 11B 218.640
86D 187.072 27 11C 220.352
97A 188.928 28 11D 222.064
10 7B 190.640 29 12A 223.936
11 7C 192.352 30 12B 225.648
12 7D 194.064 31 12C 227.360
13 8A 195.936 32 12D 229.072
14 8B 197.648 33 13A 230.784
15 8C 199.360 34 13B 232.496
16 8D 201.072 35 13C 234.208
17 9A 202.928 36 13D 235.776
18 9B 204.640 37 13E 237.488
19 9C 206.352 38 13F 239.200
Speaker:
Approx. 6.6 cm (2 5⁄8 in) dia. 4 Ω
Power output:
0.4 W (at 10 % harmonic distortion)
Power requirements:
230 V AC, 50Hz
Dimensions:
Approx. 192.5 × 92.6 × 87.7 mm (w/h/d)
(Approx. 7
Mass:
Approx. 455 g (16
Design and specifications are subject to change without notice.
5
⁄8 × 3 3⁄4 × 3 1⁄2 inches) incl. projecting parts and controls
)
oz