Sony XDP-MU110 Marketing Specifications

XDP-MU110
Make your iPod touch® or iPhone® sound crisp and clear using your factory audio system with the Sony® Digital Link Sound System.1 The Sony XDP-MU110 uses internal DSP processing to brighten your front soundstage and control playback from your device docked on the adjustable dash mounted cradle.
Bullets
• iPod touch®/iPhone® integration for your factory audio system
• Hide-away DSP processor creates balanced front stage
• Convenient setup to optimize sound output
• Built in 45 watts x 4 channel for interior speakers
• 2V front, rear and sub pre-amp output
• Convenient wireless remote
1
Features
iPod touch® and iPhone® integration
Improve the sound of your iPod touch® or iPhone® digital music using your factory audio system.1 Control playback of internally stored audio content or listen to audio from your wireless audio apps on your device with the adjustable dash mounted cradle.
DSP processing
Internal DSP processing improves both your factory audio system playback and your iPod touch® or iPhone® playback. incredible audio experience.
1
The system enables adjustment of time alignment, equalization and crossover points to deliver an
Convenient Setup
Sound is customized to t your ride. The hide-away DSP processor utilizes 3 multi-position switches to adjust 18 dierent DSP parameters.
High-powered Expansion
Whether using the internal 45W x 4 high power amplier for your speakers or the 2 Volt Front, Rear and Sub RCA pre-amp outputs to feed an external amplier, you can dial in the output for optimum sound.
Wireless Remote Control
The included wireless remote lets you control the basic functions of your XDP-MU110.
Specications
Amplier Section
Max power output
Power Ad Hoc
Speaker Impedance
AMP & General Feature
Automatic Level Optimizer
Bass/Treble
Output Power (4ohm, 1kHz,16V)(W )
Pre Out
Time Alignment Custom
Time Alignment Preset
DSP Unit: 45 watts x 4 at 4 ohms
CEA2006 DSP: 17W RMS @ 4 Ohms, 20Hz-20kHz, 1% THD+N
4-8 Ohms
Yes
Bass: +/- 7 dB @ 100HZ, Treble: +/- 7 dB @ 7 kHz
DSP Unit: 45 watts x 4 at 4 ohms
(3) Front, Rear and Sub
Yes (Adjustment)
Yes
Audio
Preout Impedance
Preout Voltage
S/N Ratio
Convenience Features
Key Illumination
General
220 ohms
2 volt
Audio Power: DSP: S/N 80 dBA
White
CEA2006 output power
CEA2006 S/N
Dimensions (WxHxD) (mm)
Maximum output power (4ohm, 1kHz, 16V)(W)
Mounting dimensions (WxHxD)(mm)
Preout impedance (ohms)
Preout output level (V)
Inputs and Outputs
12V Trigger Output(s)
Audio In
Digital Audio Input(s)
RCA Audio Output(s)
Other Features
Card Remote ( ): Option
Weights and Measurements
DSP: 17W RMS @ 4 Ohms, 20Hz-20kHz, 1% THD+N
DSP: S/N 80 dBA
DSP: 8.375 x 1.625 x 6.125 inches
DSP Unit: 45 watts x 4 at 4 ohms
DSP: 210.6 x 40 x 156.6
220
2
Power amplier turn on
High Level input connector
This unit can be connected to the following iPods. Update your iPod to the latest software before you use it.
iPod Touch 3rd - 4th generation iPhone 3GS iPhone 4
If you have any questions or problems concerning your unit that are not covered in the owners manual, consult your nearest Sony dealer.
Front, Rear and Subwoofer RCA pre-amp outputs
RM-X251
Dimensions (Approx.)
Weight (Approx.)
DSP: 8.375 x 1.625 x 6.125 inches, 210.6 x 40 x 156.6 mm
DSP: .92 kg (2 lb. 1 oz.)
Supplied Accessories
Parts for installation and connections (1 set)
Supplied Accessories
1. Works with iPod® touch 3rd-4th generation, iPhone® 3GS and iPhone 4.
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony and is a trademark of Sony. iPod touch and iPhone are trademarks of Apple Inc. All other
trademarks are the property of their respective owners. Features and specications are subject to change without notice. Updated: September 9, 2011
RM-X251 wireless remote XDP-MU110 DSP unit XA-C100IP Cradle
Loading...