Thank you for choosing this Sony product.
Before operating the TV, please read this manual
thoroughly and retain it for future reference.
Note
• Images and illustrations used in the Setup Guide and this
manual are for reference only and may differ from the
actual product.
The 75 class has a 74.5 inch (189.3 cm) viewable image
size and the 65 class has a 64.5
image size (measured diagonally).
inch (163.9 cm) viewable
Attaching the Table-Top Stand to the TV
Refer to the Setup Guide on top of the cushion.
Help
Find more troubleshooting and other useful information
directly from your TV. Press HELP on the remote control
to display a list of topics, or to search by keyword.
Help Guide (Manual)
For more detailed information, select [Help Guide] from
the Help menu on your TV. You can also check the He lp
Guide from your PC or smartphone (information
provided on the back cover).
Location of the identification label
Labels for the TV Model No. and Power Supply rating are
located on the rear of the TV.
IMPORTANT NOTICE
Owner’s Record
The model and serial numbers are located at the side
and/or rear of the TV. Record these numbers in the
spaces provided below. Refer to them whenever you call
upon your Sony dealer regarding this TV.
Model Name
Serial No.
US
2
Page 3
ADVERTENCIA
Para reducir el riesgo de incendio o descargas eléctricas, no
exponga este producto a la humedad ni a la lluvia.
This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
El producto no debe estar expuesto a goteos ni
salpicaduras, ni se deben colocar sobre él objetos con
líquidos como floreros.
PRECAUCIÓN
Para evitar descargas eléctricas y exposición a contactos
eléctricos, no utilice este enchufe de corriente alterna con
un cable de extensión, receptáculo u otro tomacorriente a
menos que los contactos eléctricos puedan ser
introducidos completamente.
• Operate the TV only on 110 V – 240 V AC
Seguridad
• Utilice el cable de alimentación de ca especificado por
Sony y que corresponda al voltaje de la zona donde vaya
a utilizarlo.
• Por razones de seguridad, el enchufe está diseñado de tal
forma que sólo puede conectarse en una dirección en los
tomacorrientes de pared. Si no puede introducir
completamente los contactos del enchufe en el
tomacorriente, póngase en contacto con su distribuidor.
• Si se introduce algún objeto sólido o cae líquido en la
unidad, desenchufe el televisor inmediatamente y haga
que sea revisado por personal especializado antes de
volver a operarlo.
• Desconecte el televisor si no va a utilizarlo durante
algunos días. Para ello, tire del enchufe, nunca del cable.
• Consulte la información sobre seguridad en Folleto de
instrucciones de seguridad.
Audio (Argentina models only)
Evite el uso prolongado del aparato con un volumen
superior a 85 decibeles, porque esto podría perjudicar su
sentido de audición.
Nota sobre Closed Captions (Argentina
models only)
El uso del televisor con finalidades distintas a la
visualización privada de emisiones de programas en UHF o
VHF o transmisiones vía cable dirigidas al público en
general puede requerir la autorización de la compañía de
emisión por cable y/o del propietario del programa.
Safety Information
WARNING
Stability Hazard
The television set may fall, causing serious personal injury
or death.
Never place a television set in an unstable location. A
television set may fall, causing serious personal injury or
death. Many injuries, p articularly to children, can be
avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television set.
• Only using furniture that can safely support the television
set.
• Ensuring the television set is not overhanging the edge of
the supporting furniture.
• Not placing the television set on tall furniture (for
example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable
support.
• Not placing the television set on cloth or other materials
that may be located between the television set and
supporting furniture.
• Educating children about the dangers of climbing on
furniture to reach the television set or its controls.
If your existing television set is being retained and
relocated, the same considerations as above should be
applied.
Before setting up your TV
Some TV models are packaged with a detached Table-Top
Stand so you can mount your TV to a wall right away. See
page
12 (Installing the TV to the Wall) if you want to mount
the TV to a wall. If you are not mounting the TV to a wall,
you will need to attach the Table-Top Stand. You will need a
Phillips screwdriver (not supplied) and the supplied screws
to complete the task, refer to the Setup Guide.
Be sure to consider the following while setting up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger
size TVs require two or more people.
• Correct hand placement while carrying the TV is very
important for safety and to avoid damage.
• Ensure your TV has adequate ventilation, see page 14.
• For best picture quality, do not expose the screen to direct
illumination or sunlight.
• Avoid installing the TV in a room with reflective wall and
floor materials.
• Avoid moving the TV from a cold area to a warm area.
Sudden room temperature changes may cause moisture
condensation. This may cause the TV to show poor
picture and/or poor color. Should this occur, allow
moisture to evaporate completely before powering the TV
on.
Securing the TV
Sony strongly recommends taking
measures to prevent the TV from
toppling over.
Unsecured TVs may topple and result in
property damage, serious bodily injury
or even death.
US
3
Page 4
Preventing the TV from Toppling
Angle brace
(not supplied)
Stand
Screw hole on the rear cover
M6 machine screw
(not supplied)
Rope or chain (not supplied)
Screw (not supplied)
1.5 N·m/1,5 N·m
{15 kgf·cm}
10 mm - 13 mm
Screw (M6)
TV’s rear co ver
Rope or chain
• Secure the TV to a wall and/or Stand.
• Do not allow children to play or climb on furniture and TV
sets.
• Avoid placing or hanging items on the TV.
• Never install the TV on:
Slippery, unstable and/or uneven surfaces.
Furniture that can easily be used as steps, such as a
chest of drawers.
• Install the TV where it cannot be pulled, pushed, or
knocked over.
• Install the TV so that the TV’s Table-Top Stand does not
protrude out from the Stand (not supplied). If the
Table-Top Stand protrudes out from the Stand, it may
cause TV set to topple over, fall down, and cause personal
injury or damage to the TV.
• Route all AC power cords and connecting cables so that
they are not accessible to curious children.
Recommended Measures to Secure the
TV
Consider the following measures when securing your TV to
a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately support the weight
of the TV. Use two angle braces (not supplied) to secure
the Stand. For each angle brace use the appropriate
hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.
2 Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the TV’s rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
US
4
The length of the M6 machine screw differs depending
on the rope or chain diameter. Please refer to below
illustration.
Page 5
3 Anchor the TV to the wall by using bolts, wall anchor and
Wall-mount holes
Rope or
chain (not
supplied)
M6 eye bolts (not supplied)
Wall-anchor (not
supplied)
10 mm - 13 mm
TV’s rear cov er
M6 eye bolt
7 mm max.
1.5 mm max.
chain (or rope).
Please see below illustration for M6 eye bolt length.
Precautions
How to care for your BRAVIA TV
Safety is very important. Please read and follow the safety
documentation (Safety Booklet) separately provided.
Unplug the TV and other
connected equipment from the
wall outlet before you begin
cleaning your TV.
• Wipe the LCD screen gently
with a soft cloth.
• Stubborn stains may be removed with a cloth slightly
moistened with a solution of mild soap and warm water.
• If using a che mically pretreated cloth, pleas e follow the
instruction provided on the package.
• Never spray water or detergent
directly on the TV set. It may drip to
the bottom of the screen or exterior
parts and enter the TV set, and may
cause damage to the TV set.
• Never use strong solvents such as a
thinner, alcohol or benzine for
cleaning.
• Do not plug in the TV into the wall outlet until the
moisture from cleaning has evaporated.
• Do not touch the TV if your hand is covered in any
chemical substance such as hand cream or sunblock.
The TV should also be placed on a stable surface to prevent
it from toppling over (see page
children or pets at home, check regularly to ensure the TV is
securely fastened.
Recommendation for an F type plug
Projection of the inner wire from the connection part must
be less than 1.5
mm.
4). If you have young
Note
• Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the Stand without securing the TV and
the Stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
(Reference drawing for an F type plug)
US
5
Page 6
The BRAVIA® 4K TV Experience
Thank you for choosing Sony! Your new BRAVIA® TV opens the door to the “4K TV Experience”. This document will help you
get the most out of your TV. Please take a moment to register your TV at:
http://esupport.sony.com/LA/perl/registration.pl
Four Steps to a 4K TV Experience
Set, Source, Sound, and Setup.
1 Set
Now that you have made the bes t selection in LED backlit LCD TV technology, be sure to remove all of the accessories
from the packaging before setting up your TV.
2 Source
To experience the stunning detail of your BRAVIA TV, you need access to HD programming.
• Upgrade your signal or content source to high-definition (4K) by contacting your HD service provider.
• Bring the astonishing resolution of your Sony 4K Ultra HD TV to life with Sony 4K Ultra HD Blu-ray Player. (The availability
depends on region)
• Receive over-the-air HD broadcasts with an HD-quality antenna connected directly to the back of your TV.
Visit http://www.antennaweb.org for more information on antenna selection and setup.
• Discover the wealth of entertainment now available on super-high resolution Blu-ray Disc™ player and other Sony HD
equipment.
3 Sound
Complete the high-definition experience with a BRAVIA Sync™ surround sound system or A/V receiver from Sony.
4 Setup
Install your TV and connect your sources. See page 10 for sample connection diagrams. To help assure the highest quality
for your HD experience, use Premium High Speed HDMI (High-Definition Multimedia Interface) cables.
This TV displays all video input signals in a resolution of 3,840 dots × 2,160 lines.
Note
• For details of supported formats, refer to the “Specifications” in this manual.
• For supported PC formats, refer to the Help Guide.
US
6
Page 7
Parts and Controls
ȩ
Controls and Indicators
(Power) /+/–
When the TV is off,
Press to power on.
When the TV is on,
Press and hold to power off.
Press repeatedly to change the
function, then press + or – button to:
• Adjust the volume.
• Select the channel.
• Select the input source of TV.
Remote Control sensor* / Light
sensor* / Illumination LED
The illumination LED lights up or blinks
according to the status of the TV.
For more information, refer to the Help
Guide.
* Do not place anything near the sensor.
US
7
Page 8
Using Remote Control
MIC
Ȫ
ȩ
ȫ
Ȭ
ȭ
Ȯ
Remote Control Parts Description
The remote control shape, location, availability and function of remote control buttons may
vary depending on your region/country/TV model.
(Microphone)
Use Voice Search. (e.g., Search
various content by voice.)
//// (Navigation
D-Pad)
On screen menu navigation and
selection.
TV
Switch to a TV channel or input
and display the TV Menu Bar.
INPUT
Display and select the input source.
(TV standby)
Turn on or turn off the TV (standby
mode).
ANT/DIGITAL/ANALOG
Switch between digital and analog
mode.
SYNC MENU
Display the BRAVIA Sync Menu.
US
8
Number buttons
Use with the 0-9 buttons to select
digital channels.
EXIT/SAIR SALIR
Return to the previous screen or exit
from the menu. When an Interactive
Application service is available, press to
exit from the service.
Google Play
Access the “Google Play” online service.
Page 9
NETFLIX (Only on limited region/
country/TV model)
Access the “NETFLIX” online service.
Color buttons
Execute corresponding function at that
time.
ACTION MENU
Display a list of contextual functions.
GUIDE
Display the digital program guide.
APPS
Access various services and
applications.
BACK/VOLTAR VOLVER
Return to the previous screen.
HOME
Display the TV Home Menu.
VOL +/– (Volume)
Adjust the volume.
JUMP
Jump back and forth between two
channels or inputs. The TV alternates
between the current channel or input
and the last channel or input that was
selected.
MUTING
Mute the sound. Press again to restore
the sound.
CH +/– (Channel)
Select the channel.
AUDIO
Change the language for the program
currently being viewed.
///.//>/
Operate media contents on the TV and
connected BRAVIA Sync-compatible
device.
SUBTITLE/CC
Turn subtitles on or off (when the
feature is available).
HELP
Display the Help menu. Help Guide can
be accessed from here.
WIDE
Change the screen format.
DISPLAY
Display information about the channel/
program/input you are viewing.
Guidelines for IR Remote Control
• Point your remote control directly at
the IR sensor located on your TV.
• Make sure that no objects are blocking
the path between the remote control
and the IR sensor on your TV.
• Fluorescent lamps can interfere with
your remote control; try turning off the
fluorescent lamps.
• If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
US
9
Page 10
Connection Diagram
Headphone/Audio
System/Subwoofer
Digital still camera/
Camcorder/USB
storage media
DVD player with
component output
Audio System with ARC/
HDMI Device
HDMI Device
VCR/Video game equipment/
DVD player/Camcorder
Cable
Router
HDMI Device
14 mm
HDMI Device
Antenna
Audio System
with Optical
Audio Input
For more information on connections, refer to the Help Guide by pressing HELP on the
remote control.
Note
• When connecting the cable to the Cable/Antenna input, finger tighten only, over tightening the
connection can damage the TV.
*
US
10
Page 11
USB 1/2, USB 3
<
<
12 mm
21 mm
• Connecting a large USB device may
interfere with other connected
devices beside it.
• When connecting a large USB device,
connect to the USB 1 port.
AUDIO OUT /
• Supports 3-pole stereo mini jack only.
• To listen to the TV’s sound through
the connected equipment, press
HOME. Select [Settings] t [Sound]
t [Headphone/Audio out] and then
select the desired item.
HDMI IN 1/2/3/4
• HDMI interface can transfer the digital
video and audio on a single cable.
•
• HDMI IN 2/3
To enjoy high quality 4K 50p/60p
contents, connect a Premium High
Speed HDMI cable to the HDMI IN 2/3
and set the [HDMI signal format] to
[Enhanced format].
For details of supported formats, refer
to the “Specifications” in this manual
(page 16-17).
• HDMI IN 3 ARC (Audio Return
Channel)
Connect your audio system to the
HDMI IN 3 to route TV audio to your
audio system. An audio system that
supports HDMI ARC can send video to
the TV, and receive audio from the TV
via the same HDMI cable. If your
audio system does not support HDMI
ARC, an additional connection with
DIGITAL AUDIO OUT (OPTICAL) is
necessary.
* When connecting mono equipment, connect to
the L (MONO) audio jack (socket).
US
11
Page 12
Installing the TV to the Wall
10 mm - 13 mm
Screw (M6)
Wall-Mount Bracket
TV’s rear cover
This TV’s instruction manual only provides the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box
as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the
Table-Top Stand; see page 13 (Detaching the Table-Top Stand from the TV).
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that installation of
your TV on the wall be performed by qualified professionals. Do not attempt to install it
yourself.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model.
Sufficient expertise is required in installing this TV, especially to determine the strength of
the wall for withstanding the TV’s weight.
• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount
Bracket thickness. Please see below illustration.
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready
to attach the Table-Top Stand. Keep the screws away from small children.
Note
• Read the supplied Safety Booklet for additional safety information.
1 Remove the screws from the rear of the TV.
US
12
Page 13
2 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Wall-Mount Bracket
(not supplied)
Screw (not supplied)
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Detaching the Table-Top Stand from the TV
To detach the Table-Top Stand from the TV, remove the screws .
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the
TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV
with the LCD panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
13
US
Page 14
Installing the TV against a wall or enclosed area
10 cm
30 cm
10 cm6 cm
Leave at least this much space around the set.
10 cm10 cm
30 cm
10 cm
Leave at least this much space around the set.
Air circulation is blocked.Air circulation is blocked.
WallWall
Ventilation
• Never cover the ventilation holes or insert anything in the cabinet.
• Leave space around the TV set as shown below.
Installed with stand
Installed on the wall
Never install the TV set as follows:
Note
• Inadequate ventilation can lead to overheating of the TV and may cause damage to your TV or cause a
fire.
14
US
Page 15
Troubleshooting
Updating...
General troubleshooting for issues like:
black screen, no sound, frozen picture, TV
does not respond, or network is lost, do the
following steps.
1 Restart your TV by pressing the power
button on the remote control until a
message appears. After twenty seconds,
press the power button on the remote
control. If the TV does not recover, try
unplugging the TV from the AC power
cord for two minutes and then plug it in
again.
2 Refer to the Help menu by pressing HELP
on the remote control.
3 Connect your TV to the Internet and
perform a software update.
4 Visit Sony support website (information
provided on the front cover).
5 Perform the factory data reset. Refer to
“How to reset the TV to factory settings”
(page 15).
When [A new TV system software update
is available...] message is displayed.
Sony strongly recommends you to update
the TV software by selecting [Update Now].
These software updates improve your TV
performance or add new features.
The following screen with [Updating...] will
appear and the illumination LED flashes
white while software is updating.
Do not unplug the AC power cord during
the software update. If you do, the software
update may not finish completely, and it
may cause a software malfunction.
Software updates can take up to 15
minutes.
When you plug in the TV, the TV may not
be able to turn on for a while even if you
press the power button on the remote
control or the TV.
It takes time to initialize the system. Wait
for about one minute, then operate it
again.
How to reset the TV to factory settings
WARNING: The reset will clear all of your
customized settings including the parental
lock for broadcast setting.
• Turn on the TV. You can reset the TV to
factory settings by pressing HOME, then
select [Settings] t [Storage & reset] t
[Factory data reset].
• To force factory data reset, unplug the AC
power cord. Press and hold both and –
buttons on the TV, then plug in the AC
power cord. Release both buttons when
the illumination LED blinks in green.
• For security purposes, be sure to remove
all personal and account information
before discarding, selling or passing your
TV to someone else by: unlinking/
unregistering, signing out of and
deactivating all network services as well
as factory reset the TV.
Troubles and Solutions
When the illumination LED is flashing in
red.
• Count how many times it flashes (interval
time is three seconds).
Reboot the TV by disconnecting the AC
power cord from the TV for two minutes,
then turn on the TV.
If the problem persists, disconnect the AC
power cord, and contact Sony Customer
Support (information provided on the front
cover) with the number of times the
illumination LED flashes.
There is no picture (screen is dark) and no
sound.
• Check the cable/antenna connection.
• Connect the TV to the AC power, and press
the power button on the TV or the remote
control.
Some programs cannot be tuned.
• Check the cable/antenna connection.
The remote control does not function.
• Replace the batteries.
US
15
Page 16
The parental lock for broadcast password
has been forgotten.
• Enter 4357 for the password and select
[Change password].
The restricted profile password has been
forgotten.
• Perform the force factory data reset. Refer to
“How to reset the TV to factory settings”
(page 15).
The TV and its surroundings become
warm.
• When the TV is used for an extended period
of time, the TV and its surroundings may
become warm to the touch. This is not a
malfunction of the TV.
Specifications
System
Television system
Analog: NTSC/PAL-M/PAL-N
Digital: ISDB-T/ISDB-T
Channel coverage
Depending on your country/area selection
Analog: UHF/VHF/Cable
Digital: UHF/VHF
Panel system
LCD (Liquid Crystal Display) Panel, LED
Backlight
Speaker output
10 W + 10 W
Wireless technology
Protocol IEEE802.11ac/a/b/g/n
Bluetooth Version 4.1
mode] is set to [Normal], the resolution is
displayed as 3840 × 2160p. To display 4096
× 2160p, set [Wide mode] setting to [Full 1]
or [Full 2].
*2 HDMI IN 2/3 only. To support 18 Gbps, set
[HDMI signal format] to [Enhanced format].
*3 Refer to the Help Guide for details.
Audio:
5.1 channel linear PCM: 32/44.1/48/88.2/
96/176.4/192 kHz 16/20/24 bits, Dolby
Digital, Dolby Digital Plus and DTS
ARC (Audio Return Channel) (HDMI IN 3
only)
(Two channel linear PCM: 48 kHz 16 bits,
Dolby Digital, Dolby Digital Plus, DTS)
B
1*2
, 4096 × 2160p
3
US
16
Page 17
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear PCM:
48 kHz 16 bits, Dolby Digital, DTS)
AUDIO OUT / (Stereo mini jack)
Headphone, Audio output, Subwoofer
1, 2, 3
USB port 1 and 2 support High Speed USB
(USB 2.0)
USB port 3 supports Super Speed USB (USB
3.1 Gen 1)
LAN
10BASE-T/100BASE-TX connector
(Connection speed may differ depending on
the network environment. 10BASE-T/
100BASE-TX communication rate and
communication quality are not guaranteed
for this TV.)
Refer to the Help Guide for supported files
and formats in Home Network.
Others
Operating temperature
0 ºC – 40 ºC
Power and others
Power requirement
110 V – 240 V AC, 50/60 Hz
Power consumption
in use
XBR-75X855F: 250 W
XBR-65X856F: 196 W
in standby*
Less than 0.50 W
1*2
Screen size (measured diagonally) (Approx.)
XBR-75X855F: 189.3 cm / 74.5 inches (75
class)
XBR-65X856F: 163.9 cm / 64.5 inches (65
class)
Display resolution
3,840 dots (horizontal) × 2,160 lines (vertical)
Output Rating
USB 1/2
5 V , 500 mA MAX
USB 3
5 V , 900 mA MAX
Dimensions (Approx.)
with stand
XBR-75X855F: 1,673 × 1,031 × 371 mm
XBR-65X856F: 1,450 × 900 × 315 mm
without stand
XBR-75X855F: 1,673 × 963 × 54 mm
XBR-65X856F: 1,450 × 836 × 52 mm
wall-mount hole pattern
XBR-75X855F: 400 × 300 mm
XBR-65X856F: 300 × 300 mm
wall-mount screw size (mm)
M6 (length: refer to diagram on page 12.)
Mass (Approx.)
with stand
XBR-75X855F: 40.1 kg
XBR-65X856F: 26.5 kg
without stand
XBR-75X855F: 38.9 kg
XBR-65X856F: 25.6 kg
*1 Specified standby power is reached after the
TV finishes necessary internal processes.
*2 Standby power consumption will increase
when your TV is connected to the network.
Note
• Optional accessories availability depends on
countries/region/TV model/stock.
• Design and specifications are subject to change
without notice.
Licensing Information
• The terms HDMI and HDMI
High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or
registered trademarks of HDMI
Licensing Administrator, Inc. in the
United States and other countries.
• Manufactured under license from
Dolby Laboratories. Dolby, Dolby
Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
• “BRAVIA”, and BRAVIA Sync
are trademarks or registered marks of
Sony Corporation.
• Gracenote, the Gracenote logo and
logotype, “Powered by Gracenote”
logo are either registered trademarks
or trademarks of Gracenote, Inc. in the
United States and/or other countries.
• ASTRO TV is a software developed by
MIRAKULO Software Ltda that
comprises a complete implementation
of the Ginga Middleware Standard,
compliant with Brazilian ABNT
NBR-15606.
• GINGA® is a registered trademark of
PUC-Rio/UFPB
• NCL® is a registered trademark of
PUC-Rio
• Vewd® Core. Copyright 1995-2017 Vewd
Software AS. All rights reserved.
US
17
Page 18
• Google, Android TV, Google Play,
Chromecast built-in, YouTube and
other related marks and logos are
trademarks of Google LLC.
• Wi-Fi®, Wi-Fi Alliance®, Wi-Fi Direct®
and Miracast® are registered
trademarks of Wi-Fi Alliance.
• Wi-Fi Protected Setup™ is a trademark
of Wi-Fi Alliance.
• The Wi-Fi CERTIFIED™ Logo is a
certification mark of Wi-Fi Alliance.
• The Bluetooth® word mark and logos
are registered trademarks owned by
the Bluetooth SIG, Inc. and any use of
such marks by Sony Corporation is
under license. Other trademarks and
trade names are those of their
respective owners.
• Netflix is a registered trademark of
Netflix, Inc.
• TUXERA is a registered trademark of
Tuxera Inc. in the US and other
countries.
• USB-IF SuperSpeed USB Trident logo is
a registered trademark of USB
Implementers Forum, Inc.
• All other trademarks are the property
of their respective owners.
Resolución real:
3 840 x 2 160 píxeles
18
US
Page 19
Page 20
For Your Convenience
Help Guide
http://rd1.sony.net/help/tv/fusltn1/h_usltn/
Online
Registration:
Be sure to register your TV.
http://esupport.sony.com/LA/perl/registration.pl
Your TV is capable of receiving software updates. For the
latest information about software updates for your TV, visit:
Software
Updates:
http://esupport.sony.com/LA/
NOTE: If your TV is connected to the Internet, you can check
for software updates by pressing HELP, and select [System
software update].
Manufacturer or Importer’s nameSONY ARGENTINA S.A.
ManufacturerSONY
ModelXBR-65X856FXBR-75X855F
Energy efficiency class on a scale from A+
(more efficient) to F (less efficient)
On mode power consumption (W)101125
Annual power consumption in on mode
(kWh)
(Considering 4 hours a day for 365 days.
Actual consumption depends on the
conditions of use of the device)