Sony XBR-55X900C, XBR-65X900C, XBR-75X910C Reference Guide

Television

Reference Guide

Téléviseur

Manuel de référence

Sony Customer Support

U.S.A.: http://www.sony.com/tvsupport Canada: http://www.sony.ca/support

United States Canada

1.800.222.SONY 1.877.899.SONY

Please Do Not Return the Product to the Store

XBR-75X910C / 65X900C / 55X900C

Service à la clientèle Sony

Canada : http://support.sony.ca/fr États-Unis : http://www.sony.com/tvsupport

Canada États-Unis

1.877.899.SONY 1.800.222.SONY

Ne retournez pas le produit au magasin

Table of Contents

IMPORTANT NOTICE . . . . . . . . . . . . . . . . 2

Safety information . . . . . . . . . . . . . . . . . 3

Precautions . . . . . . . . . . . . . . . . . . . . . . . 6

Parts and Controls . . . . . . . . . . . . . . . .8

Controls and Indicators . . . . . . . . . . . . . 8

Inputs and Outputs . . . . . . . . . . . . . . . . 9

Using Remote Control . . . . . . . . . . . . 11

Remote Control Parts Description. . . . 11

Using the Touchpad Remote

Control . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Launching the Touchpad Remote

Control Introduction/Tutorial. . . . . . . . 13

Attaching the Table-Top Stand

(Alternative) . . . . . . . . . . . . . . . . . . . . 14

Connecting the TV . . . . . . . . . . . . . . . 16

Showing a Set Top Box with HDMI

connection . . . . . . . . . . . . . . . . . . . . . . 16

Showing a Set Top Box with

COMPONENT connection . . . . . . . . . . . 17

Cable System or VHF/UHF Antenna

System . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connecting MHL Device . . . . . . . . . . . . 18

Showing HD BRAVIA® Sync™ Basic

Connection . . . . . . . . . . . . . . . . . . . . . . 19

Showing HD Basic Connection with

Home Theater System . . . . . . . . . . . . . 20

Showing PC Connection with

SD VCR/DVD . . . . . . . . . . . . . . . . . . . . . 21

Installing the TV to the Wall . . . . . . .22

Using the supplied Wall-Mount

Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using an optional Wall-Mount

Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . 29

Installing the TV against a wall or

enclosed area. . . . . . . . . . . . . . . . . . . 31

Troubleshooting. . . . . . . . . . . . . . . . .32

Troubles and Solutions . . . . . . . . . . . . 32

Specifications . . . . . . . . . . . . . . . . . . .33

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manua l thoroughly and retain it fo r future reference.

Note

• Images and illustrations used in Startup Guide and this manual are for reference only and may differ from actual product appearance.

The 75 class has a 74.5 inch (189.3 cm) viewable image size, the 65 class has a 64.5 inch (163.9 cm) viewable image size and the 55 class has a 54.6 inch (138.8 cm) viewable image size (measured diagonally).

Location of the identification label

Labels for the Model No. and Power Supply rating are located on the rear of the TV.

IMPORTANT NOTICE

Owner’s Record

The model and serial numbers are located at the side and rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV.

Model Name

Serial No.

CAUTION

To prevent electric shock and blade exposure, do not use this AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted.

• Operate the TV only on 110-240 V AC (U.S.A./Canada 120 V AC)

• Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The leng th and frequency of necessary brea ks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images or playing stereoscopic 3D games until the discomfort ends; consu lt a doctor if you believe necessary. You should also review (i) the instruction manual of any other device or media used with this television and (ii) our website (http://www.sony.com/tvsupport) for the latest information. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing yo ung children to watch 3D video images or play stereoscopic 3D games. Adults should supervise young children to ensu re they follow the recommendations listed above.

• Do not use, store, or leave the 3D Glasses or battery near a fire, or in places with a high tem perature, e.g., in direct sunlight, or in sun-heated cars.

Safety information

U-shaped Bar

Declaration of Conformity

Trade Name: SONY Model: XBR-75X910C/XBR -65X900C/XBR-55X900C Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Related Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential in stallation. This equip ment generates, uses and can radiate radio frequency e nergy and, if not i nstalled and used in accordance with the instructions, may caus e harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiv er.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Pursuant to FCC regulations, you are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Note

This television includes a QAM demodulator which should allow you to receive unscrambled digital cable television programming via subscription service to a cable s ervice provider. Availability of digital cable television programming in your area depends on the type of programming and signal provided by your cable service provider.

WALL-MOUNT BRACKET

Below informatio n shows the correct handling of the WallMount Bracket. Be sure to read this information thoroughly and use the Wall-Mount Bracket correctly.

To Customers:

Be sure to observe the following precautions for safety to prevent a serious injury through fire, electric shock, the product toppling over, or the product dropping.

• Be sure to subcontract the installation to licensed contractors and keep small children away during installation.

• Be sure to subcontract moving or dismounting of the TV to licensed c ontractors.

• Do not remove screws, etc., after mounting the TV.

• Do not make alterations to the parts of th e Wall-Mount Bracket.

• Do not mount any equipment other than the specified product.

• Do not apply any load other than the TV on the WallMount Bracket.

• Do not lea n on or hang from the TV.

• Do not handle the TV with excessive force during cleaning or maintenance.

To Sony Dealers and Contractors:

The following instruction s are for Sony dealers and contractors only. Be sure to read safety precautions described below and pay special attention to safety during the installation, maintenance and checking of this product.

• When handling or mounting the TV set, hold it on the sides. Do not lift the TV by the U-shaped Bar.

Safety and Regulatory

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Only use Wireless LAN indoors when using it with IEEE

802.11a (5 GHz). This equipment complies with FCC/IC radiation exposure

limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 a nd RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).

This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter except Grant condition.

• Do not install the Wall-Mount Bracket on wall surfaces where the corners or the sides of the TV are protruding away from the wall surface.

• Do not install the TV over or under an air-conditioner.

• Be sure to install the Wall-Mount

Angle brace (not supplied)

Stand

Bracket securely to the wall following the instructions in this instruction manual. If any of the screws are loose or fall out, the Wall-Mount Bracket may fall and cause injur y or property damage.

• Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the Wall-Mount Bracket to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the Wall-Mount B racket. The diameter and length of the screws differ depending on the Wall-Mount Bracket model. Use of screws ot her than thos e supplied may result in internal damage to the TV set or cause it to fall, etc. See page 22 (Using the supplied Wall-Mount Bracket). See page 29 (Using an optional Wall-Mount Bracket).

• Be sure to assemble the bracket properly following the instructed procedure explained in this instruction manual.

• Be sure to tighten the screws securely in the designated position.

• Be careful not to subject the TV to shock during installation.

• Be sure to install the TV on a wall that is both perpendicular and flat.

• After proper installation of the TV, secure the cables properly.

• Do not allow the AC power cord or the connecting cables to be pinched as the internal conductors may become exposed and cause a short circuit or an electrical break.

Before setting up your TV

Some TV models are packaged with a detached Table-Top Stand so you can mount yo ur TV to a wall right away. See page 22 (Installing the TV to the Wall) if you want to mount the TV to a wall. If you are not moun ting the TV to a wall, you will need to attach the Table-Top Stand. You will need a Phillips screwdriver (not supplied) and the supplied screws to complete the task. Look for the supplied Table-Top Stand instruction leaflet. Be sure to consider the following while setting up your TV:

• Disconnect all cables when carrying the TV.

• Carry the TV with the adequate number of people; larger size TVs require two or more people.

• To avoid slipping and causing personal injury, do not step on the TV protection bag when unpacking the TV set.

• Pay attention so that a child does not approach during the Table-Top Stand installation.

• Correct hand placement while carrying the TV is very important for safety and to avoid damage.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor color. Should this occur, allow moisture to evaporate completely be fore powering the TV on.

Securing the TV

Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death.

Preventing the TV from Toppling

• Secure the TV to a wa ll and/or stand.

• Do not allow children to play or climb on furniture and TV sets.

• Avoid placing or hanging items on the TV.

• Never install the TV on:

 slippery, unstable and/or uneven surfaces.  furniture that can easily be used as steps, such as a

chest of drawers.

• Install the TV where it cannot be pulled, pushed, or knocked over.

• Install the TV so that the TV’s Table-Top Stand does not protrudes out from the TV stand (not supplied). If the Table-Top Stand protrudes out from the TV stand, it may cause TV set to topple over, fall down, and cause personal injury or damage to the TV.

• Route all AC power cords and connecting cables so that they are not accessible to curious children.

Recommended Measures to Secure the TV

Consider the following measures when securing your TV to a Stand (not supplied).

1 Secure the Stand for the TV.

Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardwa re to:

• Attach one side of the angle brace to the wall stud.

• Attach the oth er side to the Stand.

• Ensure your TV has adequate ventilation, see page 31.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid installing the TV in a room with reflective wall and floor materials.

2 Remove the screws from the rear of the TV.

Screw hole on the rear cover

M6 eye bolt (not supplied)

Rope or chain (not supplied)

Screw (not supplied)

8-12 mm

18 mm or more

M6 eye bolts (not supplied)

Screw holes

Rope or chain (not supplied)

Wall-anchor (not supplied)

8-12 mm

18 mm or more

4-5 mm

3 Secure the TV to the Stand.

Use the optional hardware listed as follows (not supplied):

• M6 eye bolt (screwed into the TV’s rear cover)

• A screw or similar (attach it to the Stand)

• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slac k in the rope or chain .

4 Anchor the TV to the wall by using bolts, wall anchor and

chain (or rope).

Please see below illustration for M6 eye bolt length.

The length of the M6 eye bolt differs depending on the rope or chain diameter. Please see below illustration.

Use the rope or chain for atta ching the Table-Top Stand to middle position, see page 14-15.

Note

• Your TV is shippe d with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV to a wall.

• Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended.

Precautions

How to care for your BRAVIA TV

Safety is very impor tant. Please read and fol low the safety documentation (Safety Booklet) separately provided.

Unplug the TV and other connected equipment from the wall outlet before you begin cleaning your TV.

• Wipe the LCD screen gently with a soft cloth.

• Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

• If using a chemically pretreated cloth, please follow the instruction provided on the package.

• Never spray water or detergent directly on the TV set. It may drip to the bottom of th e screen or exterior parts and enter the TV set, and may cause damage to the TV set.

• Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

• Do not plug in the TV into the wall outlet until the moisture from cleaning h as evaporated.

• Do not touch the TV if your hand is covered in any chemical substance such as hand cream or su nblock.

The TV should also be placed on a stable surface to prevent it from toppling over (see page 4). If you have young children or pets at home, check regularly to ensure the TV is securely fastened.

WALL-MOUNT BRACKET

• If yo u use the TV installed on the Wall- Mount Bracket for a long time, the wall behind or above the TV may become discolored or the wallpaper may come unglued, depending on the material of the wall.

• If the Wall-Mount Bracket is removed after installing it on the wall, the screw holes remain.

• Do not use the Wall-Mount Bracket in a place where it is subjected to mechanical vibration.

The BRAVIA® 4K TV Experience

Thank you for choosing Sony! Your new BRAVIA® TV opens the door to the “4K TV Experience.” This document will help you get the most out of your TV. Please take a moment to register your TV at:

U.S .A. : http ://pro ductre gistratio n.son y.com Canada: http://www.sony.ca/registration

Four Steps to a 4K TV Experience

Set, Source, Sound, and Setup.

1 Set

Now that you have made the best selection in LED backlit LCD TV technology, be sure to remove all of the accessories from the packaging before setting up your TV.

2 Source

To experience the stunning detail of your BRAVIA TV, you need access to HD programming.

• Upgrade your sign al or content source to highdefinition (4K) by contacting your HD service provider.

This TV displays all video input signals in a resolution of 3,840 dots × 2,160 lines.

The following chart shows the high-definition (HD) and stan dard-definition (SD) video formats supported by your BRAVIA TV inputs.

INPUT VIDEO AUDIO

• Bring the astonishing resolution of your Sony 4K Ultra HD TV to life with Sony 4K Ultra HD Media Player. (The availability depends on region)

• Receive over-the-air HD broadcasts with an HDquality antenna connected directl y to the back of your TV. Visit http://www.antennaweb.org for more information on antenna selection and setup.

• Discover the wealth of entertainment now available on super-high resolution Blu-ray Disc™ player and other Sony HD equipment.

3 Sound

Complete th e high-definitio n experience with a BRAVIA Sync™ surround sound system or A/V receiver from Sony.

4 Setup

Install your TV and connect your sources. See page 16 for sample connection diagrams. To help assure the highest quality for your 4K experience, use Sony HDMI (High-Def inition Multimedia Interface) cables.

To learn more about 4K TV, visit:

U.S.A.: http://www.sony.com/HDTV Canada: http://www.sony.ca/hdtv

4K*11080/

24p/30p

SUPPORTED FORMATS

1080p*11080i

720/

24p/30p

720p*1480p 480i PC*

HDMI

4K/

COMPONENT

Audio L/R

VIDEO

*1 For details of supported formats, refer to the “Specifications” in this manual. *2 For supported PC formats refer to the Help Guide.

Compos ite

video

connection

Audio L/R

Parts and Controls

Controls and Indicators

 Remote Control sensor* / Light

sensor*

/ Illumination LED / 3D Sync

Transmitter (XBR-75X910C only)*

The illumination LED lights up or blinks according to the status of the TV.

•White When turning on the TV/picture off mode/software update, etc.

•Cyan When connecting with a mobile device wirelessly.

•Amber Timer is set.

 (Power)

 CH +/- (Channel)

 +/- (Volume)

 (Input select)

Display and select the input source.

 TV

Switch to a TV channel or input from other applications.

* Do not place anything near the sensor.

Inputs and Outputs

 LAN

 DIGITAL AUDIO OUT (OPTICAL)

/ VIDEO IN 1

For a composite connection*.

 VIDEO IN 2, /

COMPONENT IN

• For a composite connection:

Use VIDEO IN, and  (L/R) of / COMPONENT IN*.

• For a component connection: Use Y, P

B, PR, and  (L/R).

 (USB 1/2), (USB 3)

•Connecting a large USB device may interfere with other connected devices beside it.

• When connecting a large USB device, connect to the USB 1 jack.

 AUDIO OUT /

• To listen to the TV's sound through the connected equipment, press

HOME. Select [Settings]  [Sound]  [Headphone/Audio out] and then

select the desired item.

 HDMI IN 1/3/4

• If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use HDMI IN 4. If not, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.

 HDMI IN 2/MHL

• You can connect your MHL (Mobile High-definition Link) device using an HD quality MHL cable.

 REMOTE IR IN

REMOTE Serial Control

• These jacks are for receiving the external control signal. Enables extended control of the TV using RS232C via the IR IN and Serial Control jacks. IR IN : connect to the IR out terminal of the home controller. Serial Control : connect to the RS232C terminal of the home controller.

• Take care to not connect to headphones or an external audio system.

• If [RS232C control] is set to [On], [BRAVIA Sync settings] is not available.

 CABLE/ANTENNA

Connect to your cable or antenna.

* When connecting mono equipment, connect to

the L (MONO) audio jack.

Using Remote Control

IR (infrared) Remote Control Touchpad Remote Control

Remote Control Parts Description

 INPUT

Display and select the input source.

POWER/

Turn on or turn off the TV (standby mode).

SYNC MENU

Display the BRAVIA Sync Menu.

(Twin picture/PIP)*1*

Display two pictures simultaneously.

 Number buttons

 Color buttons

Execute correspondent function at that time.

DISPLAY

Display information about the channel/ program/input you are viewing.

NETFLIX

Access the “NETFLIX” online service.

HELP

Display Help Menu.

Use with the 0-9 buttons to select digital channels.

PIC OFF*

Turn the picture off, while sound remains on.

 ACTION MENU

Display a list of contextual functions. You can also display it by slide down your finger from ACTION MENU on the Touchpad Remote Control.

Switch to a TV channel or input from other applications.

GUIDE*

Display the digital program guide.

BACK

Return to previous screen.

HOME

Display the TV Home Menu.

DISCOVER

Bring up the Content Bar to search for content. You can also launch Content Bar by slide up your finger from DISCOVER on the Touchpad Remote Control.

//// (Item select/Enter)

 VOL +/– (Volume)

Adjust the volume.

JUMP

Jump back and forth between two channels or inputs. The TV alternates between the current channel or input and the last channel or input that was selected.

MUTING

Mute the sound. Press again to restore the sound.

CH +/– (Channel)

Select the channel.

 AUDIO

Change the language for the program currently being viewed.

CC/SUBTITLE

Turn subtitles on or off (when the feature is available).

//////

Operate media contents on TV and connected BRAVIA Sync-compatible device.

WIDE

Change the screen format.

FOOTBALL

Turn Live Football Mode on or off (when the feature is available).

 (Microphone)

Use Voice Function. (e.g., Search various content by voice.)

 Touchpad

Operate the TV with the touchpad.

 (NFC)

Touch the device (e.g. some models of Xperia) corresponding to the One-touch mirroring function, then its screen is displayed on the TV.

*1 The location, availability and function of

remote control button may vary depending on your country/region/TV model.

*2 Twin Picture/PIC OFF function will be available

from July 2015. You will receive Twin Picture/ PIC OFF function automatically as a network software upgrade. Make sure your TV is connected to the Internet. If you do not have a network connection, you will be able to download the software from the Sony support website using your PC. For details on how to upgrade, please visit the Sony support website.

Guidelines for IR Remote Control

• Point your remote control directly at the IR sensor located on your TV.

• Make sure that no objects are blocking the path between the remote control and the IR sensor on your TV.

• Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps.

• If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted.

Using the Touchpad Remote Control

Touchpad Remote Control can only be used after pairing with the TV. To pair, follow the pairing screen instruction. Pairing screen can be displayed by pressing the  button on the TV for 5 seconds, or select [Settings] - [Touchpad Remote Control settings] - [Pair Touchpad Remote Control].

Launching the Touchpad Remote Control Introduction/Tutorial

1 Press HOME.

2 Select [Settings] - [Touchpad

Remote Control settings] - [Start Introduction/Tutorial].

Attaching the Table-Top

Middle position

Thick cushion

1.5 N∙m/1,5 N∙m {15 kgf∙cm}

Soft cloth

Stand plate

M5 × 10

1.5 N∙m/1,5 N∙m {15 kgf∙cm}

Stand (Alternative)

You can change the Table-Top Stand from the edge to the middle position by referring to the instructions below.

Note

• Two or more people are needed to carry out this installation.

• Be careful not to pinch the finger during installation.

XBR-75X910C/65X900C

XBR-55X900C

1 Remove the lower screws, and then

one of the Table-Top Stand.

2 Attach the stand plate (supplied

with the TV) to the detached TableTop Stand.

3 Fix the stand plate to the Table-Top

Stand with screws (M5×10) (supplied with the TV).

4 Attach the Table-Top Stand with

M6 × 32

1.5 N∙m/1,5 N∙m {15 kgf∙cm}

Stand cover

IR Sensor

3D Sync Transmitter (XBR75X910C only)

stand plate to the middle position, and fix with screws (M6×32) (supplied with the TV.)

5 Take the same procedure for the

other side of the Table-Top Stand.

6 Attach stand covers (supplied with

the TV.)

To bundle the cables

XBR-75X910C/65X900C

XBR-55X900C

*1 Location of cable clamper when the Table-Top

Stand is attached to middle position.

*2 Location of cable clamper when the Table-Top

Stand is attached to edge position.

Note

• To detach the cable clamper from the TV, press

the top of the clamper , then pinch  as illustrated.

Note

• Two or more people are needed to carry out this

installation.

• Ensure that there are no objects in front of the

TV.

Connecting the TV

(Reference drawing for an F type plug)

1.5 mm max.

7 mm max.

Terminal cover (left)

Terminal cover (right)

Set Top Box

For more information on connections, refer to the Help Guide.

Note

• When connecting the cable to the Cable/ Antenna, input finger tighten only, over tightening the connection can damage the TV.

• For the FMP-X1, connect it to the HDMI IN 2 jack only (The availability depends on region).

• To select an input device connected to the TV, press INPUT.

Recommendation for an F type plug

Projection of the inner wire from the connection part must be less than 1.5 mm.

To attach the te r m inal cover

After connecting cables, attach the terminal cover.

Showing a Set Top Box with HDMI connection

Showing a Set Top Box with

Set Top Box

Cable or Antenna

COMPONENT connection

Cable System or VHF/UHF Antenna System

Connecting MHL Device

Use authorized MHL CABLE with MHL logo (not supplied)

MHL device

The TV simultaneously charges the MHL-compatible connected device while playing photo/ music/video files. You can use the TV remote control to control the connected MHLcompatible device.

Note

• If [Charge MHL during power off] is set to [On], you can continue charging the MHL-compatible device even when the TV is in standby mode.

• Use authorized MHL 3 CABLE with MHL logo for 4K smartphone or mobile devices.

Showing HD BRAVIA® Sync™ Basic Connection

*1Side Panel

Blu-ray Disc

HD Cable Box or HD Satellite Receiver

A/V Receiver

SAT (Dish)

Cable/Antenna

Optical Connection

Rear of TV

*1Signifies a BRAVIA Sync capable device.

The optical connection is only needed for A/V receivers that do not support ARC (Audio Return Channel). Set the speaker settings to audio out, press HOME, then select [Settings]  [Sound]  [Speakers]  [Audio system]. Set the HDMI CEC settings on the TV and AV receiver to allow for system audio control for ARC connections.

Showing HD Basic Connection with Home Theater System

Cable/Antenna

Blu-ray Disc/DVD

SD Cable Box or SD Satellite Receiver

Cable/SAT (Dish)

Home Theater System

*Optical Connection

Rear of TV

Side Panel

* The optical connection is only needed for home theater system that do not support ARC

(Audio Return Channel) when connecting with HDMI. Set the speaker settings to audio out, press HOME, then select [Settings]  [Sound]  [Speakers]  [Audio system]. Set the HDMI CEC settings on the TV and AV receiver to allow for system audio control for ARC connections.

Showing PC Connection with SD VCR/DVD

Rear of TV

DVD

VCR

Splitter

Cable/Antenna

VCR/DVD Combo

*DVI

Side Panel

Notebook PC

* DVI does not support audio signals. Connect the audio output of the PC to the PC speakers

or an A/V receiver to listen to sound from the PC.

Installing the TV to the Wall

Wall-Mount Bracket

Screw (M6)

8 mm - 12 mm

Using the supplied Wall-Mount Bracket

To Cus tome rs

Sufficient expertise is required for installing this product. Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation. Sony is not liable for any damages or injury caused by mishandling or improper installation, or installing any other than the specified product. Your Statutory Rights (if any) are not affected.

To Sony Dealers and Contractors

Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or improper installation.

Your TV can be mounted on a wall using a Wall-Mount Bracket (supplied with the TV) out of the box as packaged. Prepare the TV for the Wall-Mount Bracket before making cable connections.

For product protection and safety reasons, Sony strongly recommends that installation of your TV on the wall be performed by qualified professionals. Do not attempt to install it yourself.

 Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient

expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.

 The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket

thickness. Please see below illustration.

Note

• Read the supplied Safety Booklet for additional safety information.

• See page 3 (Safety Information) and page 6 (Precautions) on WALL-MOUNT BRACKET before carrying out Wall-Mount Bracket installation.

• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.

1 Prepare necessary items.

A Paper

Tem pl ate

H Wall-Mount

Bracket

J U-shaped Bar K Cushion

Lock plate (H1)

Lock pin (H2)

Wall-Mount Bracket (H3)

L M6 × 20

XBR-75X910C only

M6 × 12

XBR-75X910C

XBR-65/55X900C

M6 × 16

M6 × 20 L

U-shaped Bar J

1.5 N∙m/1,5 N∙m {15 kgf∙cm}

XBR-75X910C

Wall-Mount Bracket accessories (supplied)

Screws for Wall-Mount Bracket (8 mm in diameter, not supplied) (4)

2 Remove the screws from the rear of the TV before attaching the U-shaped Bar.

3 Attach the U-shaped Bar J (supplied with the TV) to the rear of the TV.

+ 53 hidden pages