Sony XA-CC1 User Manual

Features
The XA-CC1 is a connection adapter for connecting a car cradle to a Sony master unit having the CD/ MD changer control function.
•Units with CD/MD Changer Control from 2003 forward
•Following units
MEX-5DI,CDX-MP70, CDX-MP30,CDX-M730,CDX-M630,CDX-CA900X,CDX-CA720X, CDX-CA700X,CDX-CA705M,XR-CA630X,XR-CA430X
Specifications
Power requirement 12 V DC negative ground Dimensions Approx. 97.2 × 55.7 × 23.7 mm
( 3 7/8 × 2 1/4 × 15/16 in.) (w/h/d) (not including connection cable)
Mass Approx. 260 g (10 oz.)
(including connection cable) Input Car cradle I/O input (8pin) Output SONY-BUS control output (8pins)
SONY-BUS audio output (RCA-pin)
ATT control output Design and specifications are subject to change without notice.
3-257-674-11 (1)
Connection Adapter
Operating Instructions
Installation
Before installation
•Choose the installation location carefully so that the unit does not interfere with normal driving
operations.
•Avoid installing the unit where it would be subject to :
— high temperatures, such as from direct sunlight or hot air from the heater. — draft, rain or moisture. — dust or dirt. — magnetic fields.
•Install the unit at a to location that does not obstruct the operation of passenger-side airbag.
Installation location
Install the unit inside the car panel or glove box is recommended. Please consult qualified technician or service personnel if you cannot attach the connection adapter to the car securely.
If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.
Contents of this manual are printed on chlorine-free paper using VOC (Volatile Organic Compound)-free vegetable-oil-based ink.
XA-CC1
2003 Sony Corporation Printed in Japan
Connections
I / O SONY BUS
Precautions
Before making any connection, disconnect the ground terminal of the car battery to avoid short circuits.
Connection diagram
Connection example
A
Car cradle
B
Car cradle
BUS CONTROL IN
Connection
Adapter
XA-CC1
BUS CONTROL IN
BUS AUDIO IN
BUS CONTROL IN
1.6m
I/O
Car cradle
ATT
or
ATT OUT
Light blue
ATT
ATT
CONTROL OUT
BUS
AUDIO
OUT
1m
BUS
1m
1m
Supplied with the XA-C30
Sony BUS compatible CD/MD changer (optional)
Supplied with the CD/MD changer
Source selector
XA-C30
(optional)
Supplied with the CD/MD changer
Connection
Adapter
XA-CC1
BUS AUDIO IN
Source
selector
XA-C30
(optional)
BUS AUDIO IN
BUS AUDIO OUT
BUS CONTROL OUT
Front speaker
Rear speaker
Sony BUS compatible car audio
Sony BUS compatible CD/MD changer (optional)
Loading...