User guide
Wireless Charging Plate
WCH10
Contents
Introduction...................................................................................3
Charging made easy.........................................................................3
Using the Wireless Charging Plate............................................... 4
Charging your device........................................................................4
Notification light status.................................................................... 4
Legal information..........................................................................6
Declaration of Conformity for WCH10.............................................. 6
AVISO IMPORTANTE PARA MÉXICO...................................................7
2
Introduction
Charging made easy
The WCH10 Wireless Charging Plate lets you charge your device, for example, an
Xperia smartphone, without having to worry about connectors and cables. As long
as the charging plate is connected to a power supply, all you have to do is place
your device on the plate and it starts charging.
The WCH10 Wireless Charging Plate supports the Qi inductive power standard and
can therefore charge a range of Qi certified devices (not just Xperia or Sony
devices). For the latest information about supported devices, go to
www.wirelesspowerconsortium.com/products/
.
1
2
3
4
5
Only use the charger that came with your Wireless Charging Plate at purchase.
Charging plate
Charging port
Notification light
Charger cable
Charger
3
This is an internet version of this publication. © Print only for private use.
Using the Wireless Charging Plate
Charging your device
To charge your device using the Wireless Charging Plate
1 Connect the charger to a power supply and plug the charger cable into the
charging port.
2 Place your device on the charging plate. A notification light illuminates for
several seconds after the device is properly placed on the plate. Your device
then starts to charge.
To use the charging plate, some phones must be attached to a Qi certified case that
supports wireless charging. When your device is charging, do not place anything between it
and the charging plate, to avoid interference. Be especially cautious that metal objects
don't get in the way. Such objects can overheat and, if touched, they may cause burn
injuries.
The wireless charging receiver of your device is normally located around the battery area,
which may not be at the centre of your device. Be aware of this when placing your device
on the charging plate. Use the notification light on the charging plate or the charging icon
on your device to verify that your device is in the correct position and charging.
Notification light status
Flashes for 2 seconds
Solid bright light for a few seconds The device is correctly placed on the charging plate
Flashes intermittently The battery is charging
Solid dim light The battery is fully charged
The charging plate is connected to a power supply
4
This is an internet version of this publication. © Print only for private use.
Flashes continuously Charging error
5
This is an internet version of this publication. © Print only for private use.
Legal information
Sony WCH10
Prior to use, please read the
This User guide is published by Sony Mobile Communications AB or its local aliated company, without any
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies
of current information, or improvements to programs and/or equipment, may be made by Sony Mobile
Communications AB at any time and without notice. Such changes will, however, be incorporated into new
editions of this User guide.
All rights reserved.
©2014 Sony Mobile Communications AB.
Sony is the trademark or registered trademark of Sony Corporation.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property
of their respective owners.
www.sonymobile.com
Visit
All illustrations are for illustration only and may not accurately depict the actual accessory.
Declaration of Conformity for WCH10
We, Sony Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony type AC-0010, AC-0020-EU
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards EN 301 489-7:V1.3.1, EN 301
489-3:V1.6.1, EN 300 330-2:V1.5.1 EN 62 311:2008 and EN 60
950-1:2006+A11:2009+A1:2010+A12:2011 following the provisions of, Radio
Equipment and Telecommunication Terminal Equipment directive 1999/5/EC, Low
voltage directive 2006/95/EC.
Important information
for more information.
leaflet separately provided.
Lund, April 2014
Pär Thuresson,
Quality Ocer, SVP, Quality & Customer Services
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony may void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
6
This is an internet version of this publication. © Print only for private use.
AVISO IMPORTANTE PARA MÉXICO
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este
equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada.
Para consultar la información relacionada al número del certificado, refiérase a la
etiqueta del empaque y/o del producto.
Industry Canada Statement
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Avis d’industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage,
et, and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
7
This is an internet version of this publication. © Print only for private use.
Loading...