Sony VRD-VC10 QUICK START
2-514-545-11 (1)
7819900950
Synchronized Recording
Quick Start Guide
Sony Corporation 2004 Printed in China
1
Connect a video camera or VCR.
If the connected device has an S VIDEO
jack, use an S video cable.
2
Eject button
Turn on the drive and insert a disc.
3
Press [SYNC] to display “SYNC”
and press [INPUT SELECT] to
display “VIDEO.”
4
Press [REC] to standby for
recording.
5 6
When you start playback on the video
device, recording starts automatically.
Recording pauses automatically when you
stop playback on the video device.
Press [STOP] to stop recording.
Recording is completed. Eject the
disc.
Manual Recording
3 41 2
Eject button
Connect a video camera or VCR.
If the connected device has an S VIDEO
jack, use an S video cable.
5 6
Turn on the drive and insert a disc. Set the video device to the
Press [INPUT SELECT]
to display “VIDEO.”
playback pause mode.
QUICK REFERENCE
SYNC
ON
OFF
Function
Finalize disc
Erase All
Auto Play
Auto Chaptering
Start Recording
Press “REC” to standby for incoming signal c start the source
(VCR etc.) When signal is detected recording starts.
Press “REC” c start the source (VCR etc.)
Operation
Press F until “Finalize?” c S to select [Yes]
c F c S to select [Yes] c F
Press F until “Erase All?” c S to select [Yes]
c F c S to select [Yes] c F
Press F until “Auto Play?” c S to select [Yes]
c F
Press F until “Auto Chp” c S to select
desired time c F
Note
Finalize disc makes it compatible with DVD players.
Finalized disc cannot be incrementally written.
Erase all contents of a disc. This function only works with
DVD+RW.
Resulting disc starts the playback upon insertion to a DVD
player.
Writes in chapter breaks at set time interval (5, 10, 15min,
none)
Stop Recording
Press “STOP”
If D VD+R is used, DVDirect will ask “Finalize?”
when ejecting
S to select [Yes] c F
Start playback on the video
device, and press [REC] to
start recording.
Press [STOP] to stop recor ding,
and stop playback on the video
device.
Recording is completed. Eject the
disc.
Legend
F FUNCTION/ENTER button
S SELECT button
Note
Refer to Instruction manual for more information.
Loading...