Sony VPL-PHZ10 Product Sheet

3LCD Laser Light Source Projector Basic Installation

WUXGA (1920x1200) Resolution

4,500 lm w/ Constant Brightness

5,000 lm w/o Constant Brightness

VPL-PHZ10

Key Features

• 4,500 lumens with constant brightness up to 14,000h

Maximum 5,000 lumens when constant brightness mode is off

• Native WUXGA (1,920 x 1,200) Resolution

• Laser Light Source “Z-Phosphor” and 3LCD

Projection System

• Bright Era

• Reality Creation for superior picture quality

• Contrast Enhancer for high contrast

• Instant ON/OFF

• Constant Brightness Mode

• 20,000h

• Hassle-free Automatic Filter Cleaning

• Energy-efficient Functions

• Tilt Angle Free

• HDBaseT

*1 Actual hours may very depending on usage environment

Dimensions (Front)

Long-lasting Optics

of Virtually Zero Maintenance Operation

Compatibility

Unit: mm (inches)

Optical

Light Output / Color Light Output

LCD Panels 0.76” x 3 BrightEra LCD Panel

Panel Display Resolution WUXGA (1920 x 1200dots)

Contrast Ratio 500,000:1 (Full white/full black)

Light source Laser diode

Projection Lens

Screen Size 40” to 300”

Interface

Computer and Video Input/Output

Control Signal

Speaker 16W

General

Scanning Frequency H: 15 to 92kHz, V: 48to 92Hz

Display Resolution

Color System NTSC3.58, PAL, SECAM,NTSC4.43,PAL-M, PAL- N, PAL60

Zoom / Focus Approx. 1.45x Manual / Manual Lens Shift Manual, Vertical : +20% to 55%

Throw Ratio 1:28:1 to 1.88:1

INPUT A RGB / Y PB PR input connector: Mini D-sub

INPUT B HDMI input connector: HDMI 19-pin, Digital RGB/YPBPR,

INPUT C HDMI input connector: HDMI 19-pin, Digital RGB/YPBPR,

INPUT D HDBaseT interface connector: RJ45, 4 play (Video, Audio,

VIDEO IN Video input connector: Phono Jack

OUTPUT A Audio output connector: Stereo mini

RS-232C D-sub9pin male/RS232C

LAN RJ45,100BASE-TX (Shared with HDBaseT)

Computer signal input

Video signal input

4500 lumens up to 14,000 hours*1(constant brightness ON)

5000 lumens

Horizontal : +/- 10%

15 pin female Audio input connector: Stereo mini jack

HDCP support, HDMI audio support

LAN (100BASE-TX), R S-232C)

Audio input connector: Shared with input A

Maximum display resolution : 1920x1200 dots

NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, The following items are available for digital signal only: 1080/50i, 1080/60p, 1080/50p,1080/24p

(constant brightnes s OFF)

UPC Code 027242907454

Power Requirements AC 100V to 240V, 5.5A to 2.3A, 50Hz/60Hz Power Consumption 424W (Standard) / 287W (Middle) / 217W (Low)

Dimensions (Bottom)

Standby Mode Power Consumption

Heat Dissipation 1446 BTU/h

Dimensions (W x H x D) 510 x 113 x 354.6 mm

Mass 8.7kg (19lb)

Supplied Accessories

Remote Commander RM-PJ8

Optional Accessories

Projector Suspension Support PAM-200 or PAM-600 (both are compatible) USB wireless LAN module IFU-WLM3

*1 The figures are approximate. They vary depending on the environment or how the projector is used. *2 In Constant Brightness OFF mode, brightness will gradually decline over time. *3 The value is with auto light dimming activated

0.5W (when “Standby mode” is set to “Low”)

W 20”x H 4.4” x D 14”

Connector Panels

© 2017 Sony Corporation. All rights reserved. Reproduction in whole or in part without writtenpermission is prohibited. Features andspecifications are subject to change without notice. The values for mass and dimension are approximate. “SONY”, “Z-Phosphor” and “BrightEra” are trademarks of Sony Corporation. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logoare trademarks or registered trademarks of HDMI Licensing LLC in the United States andot hercountries. HDBaseTTMand the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. All other trademarks are the property of their respective owners.