Sony VPL-FHZ700LW User Manual

Data Projector

4-544-271-13 (1)

Operating Instructions

Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference.

VPL-FHZ700L

Table of Contents

Overview

Location and Function of Controls .... 3

Main Unit .....................................3

Terminals ...................................... 4

Remote Commander and Control

Panel ..........................................5

Preparation

Connecting the Projector ................... 8

Connecting a Computer ................8

Connecting Video Equipment ...... 9

Connecting an External

Monitor ................................... 11

Connecting to HDBaseT™

equipment ................................ 11

Projecting/Adjusting an Image

Projecting an Image ......................... 14

Adjusting the Focus, Size, and

Position of the Projected

image ....................................... 15

Turning Off the Power ................ 19

The Information Menu .....................35

Network

Using Network Features ...................36

Displaying the Control Window of

the Projector with a Web

Browser ...................................36

Confirming the Information

regarding the Projector ............37

Operating the Projector from a

Computer .................................37

Using the e-mail report

Function ...................................37

Others

Indicators ..........................................39

Messages List ...................................40

Troubleshooting ................................41

Cleaning the Air Filter ......................43

Installing the Optional Adaptor ........45

Specifications ...................................46

Projection Distance and Lens Shift

Range ............................................53

Dimensions .......................................57

Index .................................................61

Adjustments and Settings Using a Menu

Using a MENU ................................ 21

The Picture Menu .............................22

The Screen Menu .............................24

The Function Menu .......................... 27

The Operation Menu ........................ 28

The Connection/Power Menu .......... 29

The Installation Menu ...................... 32

Table of Contents

B Overview

Location and Function of Controls

Main Unit

1276qa85

qd 9 0

a Lens (not supplied) (page 47)

b Front panel

c Air filter cover (page 43)

d Ventilation holes (intake)

e Ventilation holes (exhaust)

Caution

Do not place anything near the ventilation holes as this may cause internal heat buildup. Do not place your hand near the ventilation holes (exhaust) and the circumference as this may cause injury.

Overview

l Rear feet (adjustable) (page 16)

m Antitheft lock

Connects to an optional antitheft cable manufactured by Kensington. For details, visit the Kensington’s web site. http://www.kensington.com/

n Antitheft bar

Connects to a commercially available antitheft chain or wire.

f ON/STANDBY indicator

(page 39)

g WARNING indicator (page 39)

h Control panel (page 5)

i Terminals (page 4)

j Optional adaptor slot (page 45)

Install an optional adaptor (not supplied).

k Remote control receiver

The remote control receivers are located at the front and rear of the projector.

Location and Function of Controls

Terminals

q;9q

S VIDEO IN

VIDEO IN

RS-232C

CONTROL S IN OUT

PLUG INPOWER

a5qs

LAN

Input (page 8)

a INPUT A

Video: RGB/YPBPR input terminal

(RGB HD VD/YP

BPR)

b INPUT B

Video: RGB input terminal (RGB)

c INPUT C

Video: DVI-D input terminal (DVI-D)

d INPUT D

Video: HDMI input terminal (HDMI)

e INPUT E

Video: Optional adaptor slot*

f S VIDEO (S VIDEO IN)

Video: S video input terminal

g VIDEO (VIDEO IN)

Video: Video input terminal

Note

* Regarding attachable optional adaptor,

consult with qualified Sony personnel.

Output (page 11)

h OUTPUT

Video: Monitor output terminal

(MONITOR)

Note

This terminal outputs the image. Output as a computer signal input from the RGB input terminal (INPUT A, INPUT B) or a video

INPUT B RGB INPUT C DVI-D

R/PR G/Y HD VD

INPUT A

INPUT E

signal input from the YP

B/P

INPUT D HDMI

BPR input terminal

OUTPUT

MONITOR

(INPUT A).

Others

i RS-232C terminal

RS-232C compatible control terminal

j LAN terminal (page 36)

k CONTROL S input terminal (DC

power supply) (CONTROL S IN PLUG IN POWER)

Connects to the CONTROL S output terminal on the supplied Remote Commander with a connecting cable (stereo mini plug (not supplied)) when using it as a wired Remote Commander. You do not need to install batteries in the Remote Commander, as the power is supplied from this terminal.

l CONTROL S output terminal

(CONTROL S OUT)

For coupling control of multiple projectors with the wired Remote Commander.

m AC IN (-) socket

Connects the supplied AC power cord.

Location and Function of Controls

Remote Commander and Control Panel

Remote Commander

Control Panel

312

ENTER

SHIFT ZOOM

INPUT

FOCUS

ECO

MODE

b Selecting an input signal

(page 14)

INPUT key (main unit) Direct input select keys (Remote Commander)

The F key is not provided in this projector.

c Operating a menu (page 21)

ENTER /V/v/B/b (arrow) keys MENU key RETURN key RESET key

d Adjusting the image (page 15)

FOCUS key

Use this key when attaching the power focus lens.

ZOOM key

Use this key when attaching the power zoom lens.

LENS SHIFT/SHIFT key ASPECT key (pages 24, 26)

Changes the aspect ratio of the projected image.

KEYSTONE key (page 16) PATTERN key (page 16) APA (Auto Pixel Alignment) key

Automatically adjusts a picture to its clearest while a signal is input from a computer. You can cancel the adjustment by pressing the APA key again while adjusting.

Note

Use this key when inputting a computer

signal via the RGB input terminal (INPUT A, INPUT B).

Overview

a Turning on the power/Going to

standby

? (On) key 1 (Standby) key

e Using various functions during

projecting

D ZOOM (Digital Zoom) +/– key

Enlarges a portion of the image while projecting.

1 Press the D ZOOM + key to display

the digital zoom icon on the projected image.

Location and Function of Controls

2 Press the V/v/B/b keys to move the

digital zoom icon to the point on the image you wish to enlarge.

3 Press the D ZOOM + key or the D

ZOOM – key repeatedly to change the enlargement ratio. The image can be

enlarged up to 4 times. Press the RESET key to restore the previous image.

TWIN (Twin Picture) key

You can project the images from two input signals on the screen as a main picture and subpicture at the same time. To switch between one and two pictures, press the TWIN key on the Remote Commander.

One picture display

• Picture settings set for one picture may not be reflected as two pictures.

BLANK key

Cuts off the image. Press again to restore the image.

MUTING key

This function is not provided in this projector.

VOLUME +/– key

This function is not provided in this projector.

FREEZE key

Pauses a projected image. Press again to restore the image.

Notes

*1: Use this key when inputting a

computer signal. But it may not be enabled, depending on the resolution of the input signal and when displaying two pictures.

*2: Use this key when inputting a

computer signal.

TWIN key

Two pictures display

(A) Main picture (B) Subpicture

You can select the image to project to the main picture. The subpicture is preset to display the image from INPUT B. For details on combinations of input signals, see “Combinations of Input Signals” on page 52.

Notes

• When displaying two pictures, the ? (On) key, 1 (standby) key, INPUT key, and BLANK key are available.

• When “Screen Aspect” (page 33) is set to “4:3,” the two picture function is not available.

• When displaying two pictures, the input signal icon does not appear in the input select window (page 14).

f Setting the energy–saving mode

easily

ECO MODE key

Energy-saving mode can be set easily. Energy-saving mode consists of “Light Output Mode,” “Constant Brightness,” “With No Input,” “With Static Signal” and “Standby Mode.”

1 Press the ECO MODE key to display

the ECO Mode menu.

ECO Mode Menu

ECO Mode

ECO

User

Sel Back

2 Press the V/v key or ECO MODE key

to select ECO or User mode. ECO: Sets each mode to the optimum

energy-saving value. Light Output Mode: Standard Constant Brightness: On With No Input: Standby With Static Signal: Light

Location and Function of Controls

Dimming Standby Mode: Low (go to step 6)

User: Sets each item of the energy-

saving mode menu as you desire (go to step 3).

3 Select “User” then press the b key.

The setting items appear.

User

Light Output Mode Standard

Constant Brightness Off

Auto Power Saving

With No Input Off

With Static Signal Light Dimming

Standby Mode Standard

Set

Sel Back

4 Press the V/v key to select the ECO

Mode item then press the b key or the ENTER key.

5 Press the V/v key to select the setting

value.

6 Press the RETURN key to restore the

previous image. For details on ECO Mode settings, see “Light Output Mode”, “With No Input”, “With Static Signal” and “Standby Mode” on the Connection/Power menu (page 29).

About Remote Commander operation

• Direct the Remote Commander toward the remote control receiver.

• The shorter the distance between the Remote Commander and the projector is, the wider the angle within which the Remote Commander can control the projector becomes.

• If there is any obstruction between the Remote Commander and the remote control receiver on the projector, the projector may not be able to receive signals from the Remote Commander.

Overview

Others

g Infrared transmitter

h ID MODE 1/2/3/4 switch

(page 28)

Sets an ID mode of the Remote Commander. If you assign a different ID number to each projector when multiple projectors are used, you can control only the projector with the same ID mode as that of the Remote Commander.

i CONTROL S output terminal

Connects to the CONTROL S input terminal on the projector with a connecting cable (stereo mini plug (not supplied)) when using the Remote Commander as a wired one. You do not need to install batteries in the Remote Commander, as the power is supplied from the projector.

Location and Function of Controls

B Preparation

Connecting the Projector

Notes

• Turn off all equipment before making any connections.

• Use the proper cables for each connection.

• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.

• For more information, refer also to the instruction manuals of the equipment you are connecting.

Connecting a Computer

Connection with a computer is explained for each input signal.

INPUT A

For connection when there is a long distance between a computer and the projector.

RGB output

terminal

Mini D-sub 15-pin – BNC cable

Computer

(not supplied)

INPUT B

For connecting a computer with an RGB output terminal.

RGB output

terminal

Mini D-sub 15-pin cable (not supplied)

Computer

Note

It is recommended that you set the resolution of your computer to 1920 × 1200 pixels for the external monitor.

Connecting the Projector

INPUT C

For connecting a computer with a DVI-D output terminal.

DVI-D output

terminal

DVI-D cable (not supplied)

Computer

INPUT C DVI-D

INPUT D

For connecting a computer with an HDMI output terminal.

HDMI output

terminal

HDMI cable (not supplied)

Computer

Notes

• The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal.

• Be sure to use the HDMI cable with an HDMI logo.

Preparation

Connecting Video Equipment

Connections with a VHS videocassette recorder, DVD player, or BD player are explained for each input signal.

S VIDEO IN

For connecting video equipment with an S-video output terminal.

S video output

terminal

Video equipment

S video cable (not supplied)

Connecting the Projector

VIDEO IN

For connecting video equipment with a video output terminal.

Video – BNC cable (not supplied)

Video equipment

Video output

terminal

INPUT A

For connection when there is a long distance between the video equipment and projector.

BPR output

terminal

Component – BNC cable (not supplied)

Video equipment

INPUT D

For connecting video equipment with an HDMI output terminal.

HDMI output

terminal

HDMI cable (not supplied)

Video equipment

Notes

• The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal or CEC (Consumer Electronics Control) Signal.

• Be sure to use the HDMI cable with an HDMI logo.

Connecting the Projector

To fix the HDMI cable

Fix the cable to the cable tie holder at the bottom of the projector, using a commercially available cable tie, as in the illustration. Use a cable tie of less than 1.9 mm × 3.8 mm in thickness.

Bottom of the projector

Cable tie (commercially available)

Cable tie holder

Connecting an External Monitor

OUTPUT

Projected images can be output to display equipment such as a monitor.

Display equipment

RGB input

terminal

Note

This terminal outputs the image. Output as a computer signal input from the RGB input terminal (INPUT A, INPUT B) or a video signal input from the YP

Mini D-sub 15-pin cable (not supplied)

BPR input terminal (INPUT A).

Preparation

Connecting to HDBaseT™ equipment

• You can connect HDBaseT equipment by attaching the Digital Interface Adaptor BKM-PJ10 (not supplied).

• When the Digital Interface Adaptor BKM-PJ10 (not supplied) is attached to the main unit, image transmission to the main unit, LAN communication, and RS-232C control are enabled with the commercially available HDBaseT transmitter. Not compatible with voice communication and power connection.

Connecting the Projector

• Use a straight LAN cable (commercially-available) with a shield of CAT5e or CAT6 to connect the main unit and HDBaseT equipment.

Connecting to the computer

INPUT E

HDMI output

terminal

HDMI cable (not supplied)

Computer

HDBaseT transmitter

Connecting to video equipment

INPUT E

HDMI output

terminal

HDMI cable (not supplied)

Video equipment

Note

HDBaseT transmitter

Connect HDBaseT transmitter and the main unit directly without a hub or router.

Connecting the Projector

Connecting to network equipment

LAN terminal

Computer

Wired connection

LAN cable (straight type) (not supplied)

Preparation

Tablet PC/Smartphone

Computer

Wireless connection

Note

Hub, Wireless router

HDBaseT transmitter

When using network features, be sure to check if “LAN Setting” is set to “via HDBaseT” (page 29).

Connecting the Projector

B Projecting/Adjusting an Image

Projecting an Image

The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances and projected image sizes, see

Computer

“Projection Distance and Lens Shift Range” (page 53).

Input select window

Video equipment

1 Plug the AC power cord into a wall

outlet.

2 Connect all equipment to the projector

(page 8).

3 Turn on the projector.

Press the ?/1 key on the main unit or the ? key on the Remote Commander.

4 Turn on the connected equipment.

5 Select the input source.

Press the INPUT key on the projector to display the input select window. Press the INPUT key repeatedly or the V/v key to select an image to be projected. The signal icon appears on the right side in the input select window when a signal is input.

Projector

You can select the input source using Direct input select keys on the Remote Commander

Wall outlet

(page 5).

6 Switch your computer to output to

external display by changing your computer’s setting.

How to switch the computer to output to the projector varies, depending on the type of computer.

(Example)

7 Adjust the focus, size, and position of

the projected image (page 15).

Projecting an Image

Adjusting the Focus, Size, and Position of the Projected image

Focus Size (Zoom) Position (Lens shift)

When attaching the Electric focus lens

Press the FOCUS key on the projector or the Remote Commander then press the B/ bkey (or V/v key) to adjust the focus.

When attaching the Manual focus lens

Turn the Focus Ring to adjust the focus.

When attaching the Electric zoom lens

Press the ZOOM key on the projector or the Remote Commander then press the B/ bkey (or V/v key) to adjust the size.

When attaching the Manual zoom lens

Turn the Zoom Ring to adjust the size.

Press the LENS SHIFT/SHIFT key on the projector or the Remote Commander then press the V/v/B/b key to adjust the position.

To return the lens to the center position of the projected image

Press the RESET key on the Remote Commander while adjusting.

Projecting/Adjusting an Image

Projecting an Image

Adjusting the tilt of the projector with the rear feet (adjustable)

When the projector is installed on an uneven surface, you can adjust using the rear feet (adjustable). To correct any trapezoidal distortion of the projected image, use the Keystone correction feature (pages 16, 32). You can also broaden the adjustment range by removing the nuts from the rear feet (adjustable).

Notes

• Be careful not to let the projector down on your fingers.

• Do not push hard on the top of the projector with the rear feet (adjustable) extended. It may cause a malfunction.

• Keystone adjustment is an electronic correction. Consequently the image quality may deteriorate.

If the projected image is trapezoidally-distorted in the vertical plane

1 Press the KEYSTONE key on the

Remote Commander once or select “V Keystone” in the Installation menu to display the adjustment menu.

2 Adjust the value using V/v/B/b.

The higher the setting, the narrower the top of the projected image. The lower the setting, the narrower the bottom of the projected image.

Increase setting

Decrease setting

Displaying a pattern for adjusting an image

You can display a pattern for adjusting the projected image with the PATTERN key on the Remote Commander. Press the PATTERN key again to restore the previous image.

Correcting for trapezoidal distortion of the projected image (Keystone adjustment)

If the screen is tilted, or you are projecting from an oblique angle, perform keystone adjustment.

Projecting an Image

Press the RESET key to restore the projected image before adjustment.

If the projected image is trapezoidally-distorted in the lateral plane

1 Press the KEYSTONE key on the

Remote Commander twice, or select “H Keystone” in the Installation menu to display the adjustment menu.

2 Adjust the value using V/v/B/b.

The higher the setting, the narrower the right side of the projected image. The lower the setting, the narrower the left side of the projected image.

Increase the setting

Decrease setting

Press the RESET key to restore the projected image before adjustment.

Notes

• Keystone adjustment is an electronic correction. Consequently the image quality may deteriorate.

• Depending on the position adjusted with the lens shift feature, using the Keystone feature may change the aspect ratio of the original image, or the projected image may be distorted.

• If keystone correction is performed using the KEYSTONE key, the Warp correction feature (if enabled) will be canceled.

Correcting image twist (Warp correction feature)

You can correct image twist with the warp correction feature.

Selecting the corner(s) of the image to be corrected

1 Move x using V/v/B/b to select the

corner you want to correct.

2 Press the ENTER key.

The cursor appears.

Adjust using this cursor

Projecting/Adjusting an Image

3 Adjust the position of the corner you

want to correct, using V/v/B/b.

Press the RESET key to restore the projected image before adjustment.

Correcting deflection 1 – left/right sides of the image

1 Press the KEYSTONE key on the

Remote Commander three times, or select “Warping” in the Installation menu, then select “Adjust.”

The guide is displayed.

1 Move x using V/v/B/b to select the

side you want to correct.

2 Press the ENTER key.

The cursor appears.

Projecting an Image

Adjust using this cursor Adjust using this cursor

3 You can adjust the deflection of the

side, using V/v/B/b.

You can adjust the center point of deflection using V/v. For the range of deflection, use B/b. You can adjust the left/right side independently.

Press the RESET key to restore the projected image before adjustment.

Correcting deflection 2 – top/bottom sides of the image

1 Move x using V/v/B/b to select the

side you want to correct.

3 You can adjust the deflection of the

side, using V/v/B/b.

You can adjust the center point of deflection using B/b. For the range of deflection, use V/v. You can adjust the top/bottom independently.

Press the RESET key to restore the projected image before adjustment.

Setting the blending function to project from multiple projectors

1 Install the projectors.

Input a pattern, etc., to adjust the projected positions from multiple projectors. Set a different ID mode for each projector (page 28).

2 Press the ENTER key.

The cursor appears.

Projecting an Image

2 Enable the Edge Blending function.

Display the main menu to set “Edge Blending” to “On” in the Installation menu.

3 Set the position of blending.

Choose the position (top/bottom/left/ right) for blending.

4 Assign the blending width.

Set the blending width according to the overlapping range for the source signal.

Assign the position and width here.

5 Adjust using “Zone Black Level Adj.”

Adjust each correction zone by “Zone Black Level Adj.” for the most uniform black level between each zone. During this adjustment, a black image is automatically projected.

6 Set “Blend Gamma.”

Select the gamma mode in which the overlapping of images is least noticeable.

Notes

• The procedure shown above is for general guidance. Your own installation may vary according to the situation.

• In case of multiple projectors, use the color matching function (page 34) to adjust for differences in color and brightness. Note that more detailed adjustment for Edge Blending is possible using a PC application. For more details, consult with qualified Sony personnel.

• When multiple projectors are set up in a line, the temperature inside the projectors may increase due to exhaust vent proximity, and an error indication may result. In this case, space the projectors farther apart and/or install deflection partitioning between them. For more details, consult with qualified Sony personnel.

Turning Off the Power

1 Press the ?/1 key on the main unit or

the 1 key on the Remote Commander.

The projector starts shutdown and turns off. If you press the ?/1 key on the main unit or the ? key on the Remote Commander within 5 seconds again, shutdown is cancelled.

2 Unplug the AC power cord from the

wall outlet.

To turn off without displaying confirmation message

Press and hold the ?/1 key on the main unit for a few seconds (page 40).

Projecting/Adjusting an Image

Blend Gamma correction

Projecting an Image

+ 44 hidden pages