Sony STR-DE485 Specification

STR-DE485
A/V Receiver
• 80 Watts Per Channel x 5 (8 ohms, 1 kHz, THD 0.7%)
• Dolby® Digital, dts® and Dolby Pro Logic® Decoding
• 1 Optical, 1 Coaxial Digital Input/1 Optical Output
• Digital Cinema Sound™ System with Cinema Studio EX Modes
• Discrete Output Transistors
Digital Section
• Digital Cinema Sound™ System with Cinema Studio EX Modes
• dts®
• Dolby® Pro Logic®
• Sound Field Programs:
Cinema - 4 Music - 4 Auto Format Decoding - 1
• Cinema Studio EX A/B/C Mode
Amplifer Section
• 5 Channel Power Rating: 100W x 5 (8 ohms, 1 kHz, THD 0.7%)
• Stereo Power Rating: 100W x 2 (8 ohms, 20Hz ­20kHz, THD 0.09%)
• 8 ohm Rated Amplifer
• Circuit Device: Discrete
• A Speaker for Front Speakers (8 - 16 ohms speakers only)
Inputs and Outputs
• 5.1 Multi-Channel Analog Input
• 2 Analog Audio Line Inputs/1 Analog Line Outputs
• 1 Optical, 1 Coaxial Input
• 1 Subwoofer Output
• 3 Composite Video Inputs/1 Composite Video Output
• 1 Composite Monitor Output
• 1/4" Headphone Jack Output
Construction Features
• Push Type Speaker Ter minals for Front A, Center, Rear
• Discrete Output Transistors
Convenience Features
• Sound Field Link
• Full Digital Cinema Sound System
• 30 Total Station Presets (20 FM/10 AM)
• Preprogrammed Remote Control
KEY FEATURES
ADDITIONAL FEATURES
Product Information
STR-DE485
A/V Receiver
Specifications
Amplifier Section
• 5 Channel Power Rating: 80W x 5 (8 ohms, 1kHz, THD 0.7%)
• Stereo Power Rating: 80W x 2 (8 ohms, 20Hz ­20kHz, THD 0.09%)
• InputSensitivity/Impedance: Line/Multi-Channel Inputs: 250mV/50 kOhm
• Frequency Response: 10 Hz - 50kHz +0.5/-2dB (w/Soundfield and EQ bypassed)
• Rec Out Level/Impedance: 250 mV/10 kOhm
• Pre Out Level/Impedance: Subwoofer: 2V/1 kOhm
Video Section
• Input Sensitivity/Impedance:
CompositeIn:1Vp-p/75 ohm
• OutputSensitivity/Impedance :
CompositeOut: 1Vp-p/75 ohm
General
• Power Requirements: AC120V, 60Hz
• Power Consumption (in Operation): 180W
• Power Consumption (Standby): 0.5W
Accessories
Supplied Accessories
• Instruction Manual
• FM Wire Antenna
• AM Loop Antenna
• RM-US306 Remote Commander® Remote Control
• Size AA Batteries (2)
Weights & Measures*
• Dimensions (W x H x D): 16
7
/8" x 56/8" x 116/8"
• Weight:15 lb. 7 oz.
ADDITIONAL FEATURES
KEY TECHNOLOGY
IN OUT IN
CDMD/TA
PE
R
L
SUB
WOOFER
MULTI CH I
N
FRONT SURROUND
R
L
CENTER
FRONTCENTERSURROUND
RL
RL
RL
RL
SPEAKERSSPEAKERS
IMPE
DANCE U
SE 8 –
16
IMPE
DANCE U
SE 8 –
16
ANTENNA
AM
FM
75
COAXIAL
DVD/LD
IN
COAXIAL
AUDIO IN AUDIO IN AUDIO OUT
AUDIO OUT
AUDIO IN
VIDEO
1
VIDEO IN
VIDEO IN
VIDEO OUT
VIDEO IN
VIDEO OUT
DVD/L
D
MON
ITO
R
VIDEO.
2
S
UB
WOOFE
R
OPTICAL
VIDEO 2
IN
D
IGITAL
Product Information
©2002 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, CineMotion, Hi-Scan, Jog Dial, Precision Drive, and WEGA are trademarks of Sony. Dolby Digital is a registered trademark of Dolby Laboratories Licensing Corporation. dts is a registered trademark of Digital Theater Systems, Inc. All other trademarks and logos are property of their respective owners.
*Weights and Measures are approximate.
Digital Cinema Sound The ultimate reference for
theater performance is where your movie was born — the dubbing stage. Directors mix, evaluate and approve the movie's final surround sound audio track before it arrives in a theater to be viewed. The dubbing stage is the movie's final proving ground for the director. Bringing the dubbing stage into your home represents the pinnacle in realistic movie sound, as the director intended it. Sony engineers, in collaboration with Sony Pictures Entertainment have captured three distinct dub­bing stages to create Digital Cinema Sound processing. This recreation of dubbing stages in Digital Cinema Sound represents the ideal movie theater sound envi­ronment based on the preference of movie directors!
Loading...