Sony SRF-V1BT Operating Instructions

4-587-914-71(1)

Getting Started

When using the unit for the first time, make sure to connect the unit to a wall outlet
using the AC adaptor (supplied). Otherwise the unit will not turn on.

FM/AM RADIO
with Bluetooth® SPEAKER

Operating Instructions

©2016 Sony Corporation Printed in China

SRF-V1BT

Listening to the Radio

Extend the antenna for
FM radio reception.

1

Turn on the unit, and select the “FM” or “AM” function.

2

TUNE dial

ENTER

Tip

The power indicator lights up in green while the unit is turned on.
To set the unit to standby mode, press  again.

Power indicator

Press repeatedly.

Connect the unit to a wall outlet and
charge the unit.

1

The built-in battery will be fully
charged (“

Wall outlet

”) in up to 6 hours.

AC adaptor
(supplied)

The unit automatically
switches to the selected
function in about 2
seconds.

To DC IN

Tip

After pressing FUNCTION
once, you can also select a
function by turning the TUNE
dial and pressing ENTER.

Press SETTINGS.

2

3

BACK

ENTER

Select “Time.”

3

Display

Select a desired station.

Scan tuning

Press SCAN to start scanning stations.

Display

 Turn the TUNE dial to select

an option.

 Press ENTER.

Perform the same procedure
for the following step.

If a receivable station is found,
“[ENTER]:Select” appears on
the display. Press ENTER to
receive the station. (If you do
not press ENTER within 3
seconds, the search will
restart.)

Set the hour and minute.

4

Press ENTER. Press ENTER.

Press ENTER.

Tips

• To stop the scanning, press BACK.

• To change the scanning direction,

Hour

turn the TUNE dial clockwise or
counterclockwise.

Press ENTER, and
press SETTINGS to
exit the setting menu.

Minute

Tip

You can select the clock display mode,
12-hour clock or 24-hour clock. See “Setting
Menu Options” for details.

Manual tuning

You can manually tune to the desired frequency.

Presetting stations (5 FM and 5 AM)

Tune to the station you want to preset.

1

Follow the steps in “Listening to the Radio” above.

To adjust the volume

2

To improve FM/AM radio reception

Press and hold the desired preset button (1–5) until “Stored to [PRESET x].”
appears on the display.

Example: Presetting a tuned station to the preset button 3

Tips

• If you try to store another station with the same preset
number, the previously stored station will be replaced.

• The preset button 3 on the unit has a tactile dot. Use the
tactile dot as a reference when operating the unit.

Listening to a preset station

Select the “FM” or “AM” function.

1

Press repeatedly.

Select the desired preset station.

2

Example: When the preset button 3 is pressed

Note

To prevent the preset from being changed by mistake,
do not hold down the preset button.

Tips

• The last set volume is stored in the unit’s memory.

• VOL + on the unit has a tactile dot. Use the tactile dot as a

reference when operating the unit.

Setting the On Timer

Press SETTINGS.

1

Select “On timer.”

2

You can set the unit to turn on the radio automatically at the set time.

When setting in standby mode

 Turn the TUNE dial to select

an option.

 Press ENTER.

Perform the same procedure
for the following steps.

Set the hour and minute.

3

Press ENTER. Press ENTER.

Hour

First set the clock. See “Getting Started” for details.

4

Press ENTER. Press ENTER.

Minute

Tip

When selecting from the
preset station list, set the
stations first. See “Presetting
stations (5 FM and 5 AM)” for
details.

Set the station received at the set time.

When setting to the last received station

When selecting from the preset station list

Press ENTER, and
press SETTINGS to
exit the setting
menu.

Activate the timer.

5

“ ” appears on the display.
The radio turns on at the set time.

To deactivate the timer

Press ON TIMER again.

Note

The On Timer function is disabled in off mode.

Listening to Music from a BLUETOOTH Device

Using the BLUETOOTH connection, you can listen to music from wirelessly connected
BLUETOOTH devices such as smartphones, tablets, PCs, etc.

Compatible BLUETOOTH devices

Compatibility requirements for the devices are as follows.
Before using a device with this unit, check that it meets
the requirements.

• Devices must support A2DP (Advanced Audio
Distribution Profile) and AVRCP (Audio/Video Remote
Control Profile).

• NFC capability (required only when using the NFC
pairing function of the unit).

Tip

BLUETOOTH wireless technology operates
within a range of about 10m (33 feet).

Connecting with a BLUETOOTH device

If your BLUETOOTH device has an NFC function, this procedure is unnecessary.
See “Connecting by One-touch (NFC)” below.

About the BLUETOOTH standby mode

The BLUETOOTH standby mode enables the unit to turn
on automatically by making a BLUETOOTH connection
from a BLUETOOTH device.
See “Setting Menu Options” for details.

Press ENTER.

Setting the Sleep Timer

Press SLEEP repeatedly to select the desired time (in minutes).

When the sleep timer is set, “SLEEP” appears
on the display.
The unit enters standby mode automatically
after a set time has elapsed.

Tips

• The last set time is stored in the unit’s memory.

• You can check the time left until the unit enters standby mode by pressing SLEEP again after

setting the sleep timer.

Turn on the unit, and select the “Bluetooth” function.

1

Press repeatedly.

When using the unit for the first time (if there
is no pairing information in the unit)

The unit will automatically switch to pairing mode. In
this case, proceed to step 3.

When connecting with the second and
subsequent devices

Proceed to step 2.

Connecting by One-touch (NFC)

Compatible smartphones

Smartphones with the NFC function built-in
(OS: Android™ 2.3.3 or later, excluding
Android 3.x)

NFC

NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as smartphones
and IC tags. Thanks to the NFC function, data
communication – for example, BLUETOOTH
pairing – can be achieved easily by simply
touching NFC-compatible devices together (i.e.,
at the N-Mark symbol or location designated on
each device).

1

The unit automatically
switches to the selected
function in about 2
seconds.

Turn on the NFC function of
the BLUETOOTH device.

If there is pairing information in the unit

The last connected
device will be connected
automatically.

Touch the BLUETOOTH device
to the N-Mark on the unit.

2

Select “Bluetooth pairing.”

2

When pairing is completed, the
BLUETOOTH device’s name will
appear on the display.

To terminate the BLUETOOTH
connection

Touch the BLUETOOTH device to the
N-Mark on the unit.

 Press SETTINGS.
 Turn the TUNE dial to select

an option.

 Press ENTER.

“Waiting for pairing” appears
on the display.

Note

If your NFC-compatible smartphone has an OS
version that is older than Android 4.1.x,
download and start the “NFC Easy Connect”
application.
“NFC Easy Connect” is a free application for
Android smartphones that can be obtained
from Google Play™. (The application may not
be available in some countries/regions.)

On the BLUETOOTH device, activate the BLUETOOTH function
and perform the pairing procedure.

3

Select “SRF-V1BT.” If “SRF-V1BT” does not
appear, perform a search of the device.

For details, refer to the operating instructions supplied with
the BLUETOOTH device.
If you are prompted to enter a passkey, enter “0000.”

Listening to music

Start playback on the
BLUETOOTH device.

1

2

When pairing is completed, the BLUETOOTH
device’s name will appear on the display.

To terminate the BLUETOOTH connection

Select the function other than the BLUETOOTH
function.

Adjust the volume.

Listening to Music from an External Device

Setting the Brightness of the Display

Connect the external device to the unit.

1

Portable digital music
player, etc.

Audio connection cable without
resistor (not supplied)

Stereo mini plug

2 rings

To AUDIO IN

Turn on the unit, and select the “AUDIO IN” function.

2

Listening through Headphones

Connect headphones that have a stereo or monaural* mini plug (not supplied).

Note

Use headphones with a stereo (3-pole) or monaural (2-pole) mini plug. No sound is heard
when using other types of plugs.

Compatible plug types

Other types of plugs

To  (headphones)

cannot be used.

1 ring

2 rings

3 or more rings

Press repeatedly.

Monaural* mini plug

Stereo mini plug

The unit automatically switches
to the selected function in about
2 seconds.

* When listening to stereo sound using

monaural headphones, you will hear
sound from the left channel only.

Start playback on the connected
device and adjust the volume.

3

Setting to Off Mode

You can set the unit to off mode to reduce the power consumption if you do not use the unit.

Press repeatedly to select the desired brightness.

Note

When the unit is powered by the built-in battery, the backlight of the display
turns off in about half a minute after operation.

Press and hold  for about 2 seconds to set to off mode.
The display turns off.

Note

The On Timer function is disabled in off mode.

Tip

When pressing  while the unit is turned on, the unit enters standby mode. In standby mode,
the backlight of the display can be turned on if desired and the On Timer function is enabled.

Setting Menu Options

Basic Operations:

To go back to the upper menu level

Press BACK.

BLUETOOTH options

BLUETOOTH options can be set when the “Bluetooth” function is selected.

Bluetooth pairing

See “Connecting with a BLUETOOTH
device.”

Bluetooth standby

When the BLUETOOTH standby mode
is set to “On,” the unit enters waiting
mode for a BLUETOOTH connection
even when the unit is in standby
mode. When making a BLUETOOTH
connection from a BLUETOOTH device,
the unit turns on automatically.

Tips

• Set the BLUETOOTH standby mode to “Off” to
reduce the power consumption when the
unit is in standby mode.

• The power indicator lights up in umber while
the unit is in standby mode, and when the
BLUETOOTH standby mode is turned on.

Note

If the AC adaptor is unplugged, the BLUETOOTH
standby mode is disabled.

Other options

On timer

See “Setting the On Timer.”

Sound

You can adjust the sound level.

Treble: Adjusts the level of high-

pitched sound.

Bass: Adjusts the level of low-pitched

sound.

Time

Time setting: Sets the clock. See

“Getting Started” for details.

12H/24H: Select the clock display

mode, 12-hour clock or 24-hour clock.

Note

The clock will be reset if the AC adaptor is
unplugged and the built-in battery is
completely exhausted.

Beep

Select “On” to activate the beep sound
when you operate the unit.

Auto power off

When “Auto power off” is set to
“Enable (15min),” the unit enters
standby mode automatically in about
15 minutes if there is no operation or
audio signal output.

Initialize

Select “OK” to initialize the unit to the
factory default settings. All settings,
such as preset radio stations and the
pairing registration information, will be
deleted.

To exit the setting menu

Press SETTINGS again.

WARNING

To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.

To reduce the risk of fire, do not cover
the ventilation opening of the
appliance with newspapers,
tablecloths, curtains, etc. Do not
expose the appliance to naked flame
sources (for example, lighted candles).

To reduce the risk of fire or electric
shock, do not expose this apparatus to
dripping or splashing, and do not
place objects filled with liquids, such
as vases, on the apparatus.

Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.

Excessive sound pressure from
earphones and headphones can cause
hearing loss.

Do not expose the batteries (battery
pack or batteries installed) to excessive
heat such as sunshine, fire or the like
for a long time.

As the main plug of AC adaptor is used
to disconnect the AC adaptor from the
mains, connect it to an easily
accessible AC outlet. Should you notice
an abnormality in it, disconnect it from
the AC outlet immediately.

The unit is not disconnected from the
AC power source (mains) as long as it
is connected to the wall outlet, even if
the unit itself has been turned off.

The nameplate and important
information concerning safety are
located on the bottom exterior of the
main unit and on the surface of the AC
adaptor.

If your skin touches the AC adaptor or
this product for a long time when the
power is on, it may cause a low
temperature injury.

The validity of the CE marking is
restricted to only those countries
where it is legally enforced, mainly in
the countries EEA (European Economic
Area).

Owner’s Record

The model and serial numbers are
located on the bottom of the unit.
Record these numbers in the space
provided below. Refer to them
whenever you call upon your Sony
dealer regarding this product.

Model No. SRF-V1BT
Serial No.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near
water.

6) Clean only with dry cloth.

7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.

8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus
(including amplifiers) that produce
heat.

9) Do not defeat the safety purpose of
the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit
into your outlet, consult an
electrician for replacement of the
obsolete outlet.

10) Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles,
and the point where they exit from
the apparatus.

11) Only use attachments/accessories
specified by the manufacturer.

12) Use only with the cart,
stand, tripod, bracket, or
table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
injury from tip-over.

13) Unplug this apparatus
during lightning storms or
when unused for long
periods of time.

14) Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.

The following FCC/IC statement
applies only to the version of this
model manufactured for sale in the
USA and Canada. Other versions
may not comply with FCC/IC
technical regulations.

NOTE:

For United States customers. Not
applicable in Canada, including in the
province of Quebec.

This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
 Reorient or relocate the receiving

antenna.

 Increase the separation between

the equipment and receiver.

 Connect the equipment into an

outlet on a circuit different from
that to which the receiver is
connected.

 Consult the dealer or an

experienced radio/TV technician for
help.

This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.

CAUTION

You are cautioned that any changes or
modifications not expressly approved
in this manual could void your
authority to operate this equipment.

This equipment must not be co­located or operated in conjunction
with any other antenna or transmitter.

This equipment complies with FCC/IC
radiation exposure limits set forth for
an uncontrolled environment and
meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C
to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules.
This equipment has very low levels of
RF energy that it deemed to comply
without maximum permissive
exposure evaluation (MPE). But it is
desirable that it should be installed
and operated keeping the radiator at
least 20 cm or more away from
person’s body (excluding extremities:
hands, wrists, feet and ankles).

Notice for the customers in Canada

This device complies with Industry
Canada’s licence-exempt RSS
standard(s).
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference,
including interference that may cause
undesired operation of the device.

Under Industry Canada regulations,
this radio transmitter may only operate
using an antenna of a type and
maximum (or lesser) gain approved for
the transmitter by Industry Canada. To
reduce potential radio interference to
other users, the antenna type and its
gain should be so chosen that the
equivalent isotropically radiated power
(e.i.r.p.) is not more than that
necessary for successful
communication.

Precautions

• Operate the unit only on the power
sources specified in “Specifications.”
For AC operation, use only the supplied
AC adaptor. Do not use any other type
of AC adaptor.

• Failure to use the supplied AC adaptor
may cause the unit to malfunction, as
the polarity of the plugs of other
manufacturers may be different.

• When operating the unit on the built-in
battery, it is recommended that you
remove the AC adaptor from the wall
outlet and the DC IN jack. Disconnect
the plug of the external power source
before operating the unit.

• Avoid exposure to temperature
extremes, direct sunlight, moisture,
sand, dust or mechanical shock. Never
leave in a car parked in the sun.

• Do not expose the unit to strong
impact or excessive force. A glass
material is used for the display in some
models. If the glass chips or cracks, it
may cause injury. In that case, stop
using the unit immediately and make
sure not to touch the damaged parts.

• Should any solid object or liquid fall
into the unit, disconnect the AC
adaptor, and have the unit checked by
a qualified personnel before operating
it any further.

• Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or spring­wound watches away from the unit to
prevent possible damage from the
magnetism.

• To clean the casing, use a soft dry cloth.
Do not use any type of solvent, such as
alcohol or benzine, which may damage
the finish.

• Do not operate the unit with wet hands
since it may cause a short circuit.

• Make sure not to splash water on the
unit. This unit is not waterproof.

• When you do not use the unit for a
long time, charge the battery every 6
months.

• Under certain circumstances, especially
when the air is very dry, it is not
uncommon to experience a discharge
of static electricity, or shock, when your
body comes in contact with another
object, in this case the ear buds
touching your ear(s). The energy from
this natural discharge is extremely
small and is not emitted by your
product but rather a natural
environmental occurrence.

• Listening with this unit at high volume
may affect your hearing. For traffic
safety, do not use this unit while driving
or cycling.

• Do not apply any shock or excessive
impact to the unit. The glass material of
the display may break and cracks and
shards may cause injury. If the display
is damaged, stop using the unit and do
not touch the broken or cracked parts.

If you have any questions or
problems concerning your unit,
please consult your nearest Sony
dealer.

Troubleshooting

Should any problems persist after
you have made the following checks,
consult your nearest Sony dealer.

General

Display is dim, or no indication is
displayed.

• The unit is being used in extremely
high or low temperatures or in a place
with excessive moisture.

The volume cannot be turned up
when the unit is powered by the
built-in battery.

• When the remaining battery level gets
low (when the battery icon is empty),
the maximum volume level is limited to
“22.” Charge the unit by connecting the
AC adaptor (supplied).

The volume level is low in the
“Bluetooth” function or the
“AUDIO IN” function compared with
the volume level when listening to
the radio.

• Adjust the volume on the connected
device.

The unit enters standby mode
automatically.

• By default, this unit is set to enter
standby mode automatically after
about 15 minutes of no operation or
audio signal output. See
“Auto power off” in “Setting Menu
Options” for details.

Radio

Very weak or interrupted sound, or
unsatisfactory reception.

• If you are in a building, listen near a
window.

• Extend the antenna and adjust the
length and the angle for best reception.

• If a mobile phone is placed close to the
unit, a loud noise may be heard from
the unit. Keep the phone away from
the unit.

A desired station cannot be received
when a preset button is pressed.

• Make sure you have selected the
desired band (FM or AM) before you
press the preset button. One station for
each band can be set to each button.

• You may have held down the preset
button to which the station was
assigned, causing the station to be
replaced by a new one. Assign the
desired station again.

• Preset buttons cannot be used when
the setting menu is displayed.

• If you have moved to another region,
assign the new station to a preset
button.

BLUETOOTH

There is no sound.

• Make sure that this unit is not too far
from the BLUETOOTH device, or that
this unit is not receiving interference
from a wireless LAN, another 2.4 GHz
wireless device, or a microwave oven.

• Check that the BLUETOOTH connection
was completed properly between this
unit and the BLUETOOTH device.

• Perform pairing again. (See
“Connecting with a BLUETOOTH
device.”)

• Keep away from metal objects or
surfaces.

• Make sure that the BLUETOOTH
function is activated on the
BLUETOOTH device.

The sound skips or the
correspondence distance is short.

• If a device that generates
electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH
device(s), or a microwave oven is
nearby, move away if possible. Or use
the device and the unit away from such
sources.

• Remove any obstacle between this unit
and the device or move the device and
the unit away from the obstacle.

• Locate this unit and the device as close
to each other as possible.

• Re-position this unit.

• Try using the BLUETOOTH device in

another position.

A connection cannot be established.

• Depending on the device to be
connected, it may require some time to
start communication.

• Perform pairing again. (See steps 2 and
3 of “Connecting with a BLUETOOTH
device.”)

• To listen to music on a device that does
not have a BLUETOOTH function, such
as a PC without BLUETOOTH function,
connect the device to the AUDIO IN
jack on the unit. (See “Listening to
Music from an External Device” for
details.)

• A BLUETOOTH connection with two
BLUETOOTH devices cannot be
established at the same time.

Pairing fails.

• Bring the BLUETOOTH device closer to
the unit.

• Make sure that the BLUETOOTH
function is activated on the
BLUETOOTH device.

• If the BLUETOOTH connection cannot
be established after pairing is
completed, perform step 3 of
“Connecting with a BLUETOOTH
device.”

• Delete the model name of this unit
from the BLUETOOTH device and
perform pairing again. (See steps 2 and
3 of “Connecting with a BLUETOOTH
device.”)

Pairing using the NFC function fails.

• Try pairing manually. (See “Connecting
with a BLUETOOTH device.”) Some
NFC-compatible smartphones may not
be paired using the NFC function of this
unit, depending on the features or
specifications of the device.

• Relaunch “NFC Easy Connect” and move
the smartphone slowly over the
N-Mark.

• Check that the smartphone meets the
compatibility requirements. (See
“Compatible smartphones” in
“Connecting by One-touch (NFC).”)

If the unit still does not operate
properly

Try pressing RESET on the bottom using a thin
rod. The unit will restart, retaining the
user-configured settings.

If maintenance service is performed

All user-configured settings, such as preset
radio stations, the sleep timer, and the clock,
may be initialized.
Please note your settings in case you need to
configure them again.

Messages

No preset

• No station in the selected band (FM or AM)
has been preset to the pressed button.

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
(The United States model only)
With 4-ohm loads, both channels
driven from 150Hz  10,000Hz;
rated 2W per channel-minimum
RMS power, with no more than 10%
total harmonic distortion in AC
operation.

Operating temperature range

5°C – 35°C (41°F – 95°F)

Time display

12-hour system or 24-hour system

Frequency range

FM: 87.5 MHz – 108 MHz
(0.1MHz step)
AM: 530 kHz – 1,710 kHz
(10kHz step)

Intermediate frequency

FM: 128 kHz
AM: 45 kHz

Speaker

Approx. 45 mm (1 13/16 in) dia., 4 Ω,
stereo

Audio power output

2.5 W + 2.5 W (when the unit is

powered by the supplied AC
adaptor)

1.5 W + 1.5 W (when the unit is

powered by the built-in battery)

BLUETOOTH

Communication System

BLUETOOTH Specification version

4.1

Output

BLUETOOTH Specification Power
Class 2

Maximum communication range

Line of sight approx. 10 m (33 feet)*

Frequency band

2.4 GHz band
(2.4000 GHz - 2.4835GHz)

Modulation method

FHSS

Compatible BLUETOOTH Profiles*

A2DP
(Advanced Audio Distribution Profile)
AVRCP
(Audio/Video Remote Control Profile)

Supported Codec*

4

SBC*

3

Transmission range (A2DP)

20 Hz - 20,000 Hz
(Sampling frequency 44.1 kHz)

*1 The actual range will vary depending on

factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
software application, etc.

2

BLUETOOTH standard profiles indicate the

*

purpose of BLUETOOTH communication
between devices.

3

Codec: Audio signal compression and

*

conversion format

4

Subband Codec

*

Input

AUDIO IN jack
(ø 3.5mm (

5

/32 in), stereo mini jack)

Output

 (headphones) jack
(ø 3.5 mm (

5

/32 in), stereo mini jack)

Power requirements

Built-in lithium-ion rechargeable
battery

Power

DC 5.8 V 2.0 A (using the supplied
AC adaptor connected to AC 120 V,
60 Hz power supply) or, using
built-in lithium-ion battery

2

Usage life of lithium-ion battery

BLUETOOTH: Approx. 32 hours*
FM: Approx. 31 hours*

1

AM: Approx. 15.5 hours*

*1 When the specified music source is used and

the volume level of the unit is set to the
following

— BLUETOOTH: 20
— FM: 25
— AM: 30

BLUETOOTH: Approx. 15 hours*
FM: Approx. 25.5 hours*
AM: Approx. 15.5 hours*

*2 When the specified music source is used and

the volume level of the unit is set to
maximum

1

1

2

2

2

License and Trademark Notice

• The BLUETOOTH word mark and
logos are owned by the Bluetooth
SIG, Inc. and any use of such marks
by Sony Corporation is under license.

• The N Mark is a trademark or
registered trademark of NFC Forum,
Inc. in the United States and in other
countries.

• Android™ and Google Play™ are
trademarks of Google Inc.

• Other trademarks and trade names
are those of their respective owners.
In this manual, ™ and
not specified.

marks are

®

Power consumption

At the standby mode

0.6W or less
(when the brightness of the display
is set high and the BLUETOOTH
standby mode is set to on)

At the off mode

0.2W or less

Dimensions

Approx. 106 mm  172 mm  117mm
(4 1/4in  6 7/8in  4 5/8in) (W/H/D)
including projecting parts and
controls

Mass

Approx. 880 g (1 lb 15 oz)

For customers in the USA

Please register this product on line at
the following website.

http://www.sony.com/
productregistration

Proper registration will enable us to
send you periodic mailings about new
product, services and other important
announcements. Registering your
product will also allow us to contact
you in the unlikely event that the
product needs adjustment or
modification. Thank you.

Supplied accessories

AC adaptor (AC-E5820) (1)
Warranty (1)

Design and specifications are
subject to change without notice.

1