Sony S-Frame DPF-N700 Operating Instructions Manual

SONY:

3-300-208-12 (2)

Before operation

I

Digital

Photo

Frame

DPF-V900N700

Basic operations

Advanced operations

Using an external device

Error messages

Troubleshooting

Additional information

I

I
I

I

Operating

Before operating this unit, please read this manual thoroughly and
retain it for future reference.

Owner's

The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DPF­Serial No.

~

MEMORY

STICK

© 2008 Sony Corporation

Instructions

Record

V900N700

'"

mI!IfIm_

~

IililiI

S-Frame

IMPORTANT

To reduce fire or shock hazard, do not
expose the unit to rain or moisture.

CAUTION: TOREDUCE

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

THE

RISKOFELECTRIC SHOCK,

PERSONNEL

This symbol is intended to alert the
user to the presence
"dangerous voltage" within the
product's enclosure that may be
sufficient magnitude to constitute a
risk

of

electric shock to persons.

This symbol is intended to alert the

user to the presence
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.

of

uninsulated

of

important

of

SAFEGUARDS

For your protection, please read these safety
instructions completely before operating the
appliance, and keep this manual for future reference.
Carefully observe all warnings, precautions

instructionsonthe appliance,orthe
in the operating instructions and

one

adhere

Use

Power Sources

This set should be operated only from the type
power source indicated on the marking label.Ifyou
are not sure
your home, consult your dealer or local power
company. For those sets designed to operate from
battery power, or other sources, refer to the operating

instructions.

Polarization

This set may be equipped with a polarizedacpower

cord plug (a plug having one blade wider than the
other).

This plug will fit into the power outlet only one way.
This
plug fully into the outlet, try reversing the plug.
plug should still fail to fit, contact your electrician to
have a suitable outlet installed. Do not defeat the
safety purpose

of

the type of electrical power supplied to

is

a safety feature.Ifyou are unable to insert the

of

the polarized plug by forcing it in.

and
described
to them.

of

If

the

2 GB

Overloading

Do not overload wall outlets, extension cords or
convenience receptacles beyond theircapacity, since
this can result in fire orelectric shock.

Object and Liquid Entry

Never push objectsofany kind into the set through
openings
or short out parts that could result in a fire or electric
shock. Never spill liquid

as

they may touch dangerous voltage points

of

any kind on the set.

Attachments

Do not use attachments not recommended by the
manufacturer, as they may cause hazards.

Cleaning

Unplug the set from the wall outlet before cleaning or
polishing it. Do not use liquid cleaners or aerosol
cleaners. Use a cloth lightly dampened with water for
cleaning the exterior

of

the set.

Installation

Water and Moisture

Do not use power-line operated sets near water - for

or

or

heat

example, near a bathtub, washbowl, kitchen sink,
laundry tub,ina wet basement,ornear a swimming
pool, etc.

Power-Cord Protection

Route the power cord so that it is not likely to be
walked on
them, paying particular attention to the plugs,
receptacles, and the point where the cord exits from
the appliance.

or

pinched by items placed upon or against

Accessories

Do not place the set on an unstable cart, stand, tripod,
bracket, or table. The set may fall, causing serious
injury to a child
set. Use only a cart, stand, tripod, bracket, or table

recommended by the manufacturer.

oranadult, and serious damage to the

Ventilation

The slots and openingsinthe cabinet are provided for

necessary ventilation. To ensure reliable operation
the set, and to protect it from overheating, these slots
and openings must never be blocked or covered.

- Never cover the slots and openings with a cloth or
other materials.

- Never block the slots and openings by placing the
set on a bed, sofa, rug, or other similar surface.

- Never place the set in a confined space, such as a
bookcase, or built-in cabinet, unless proper

ventilation is provided.

- Do not place the set near or over a radiator

register, or where it is exposed to direct sunlight.

of

-

If

the set does not operate normally when following
the operating instructions. Adjust only those
controls that are specified in the operating

of

instructions. Improper adjustment

in

may result
extensive work by a qualified technician to restore
the set to normal operation.

- When the set exhibits a distinct change in
performance - this indicates a need for service.

damage and will often require

other controls

Servicing

Do not attempt to service the set yourself as opening
or removing covers may expose you to dangerous

or

voltage
Refer all servicing to qualified service personnel.

other hazards.

Replacement parts

When replacement parts are required, be sure the

service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.

Unauthorized substitutions may result in fire, electric
shock, or other hazards.

Safety Check

Upon completionofany service or repairs to the set,
ask the service technician to perform routine safety
checks (as specified by the manufacturer) to

in

determine that the set is

safe operating condition.

Lightning

For added protection for this set during a lightning
storm,

or

when it is left unattended and unused for
long periods
and disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and power­line surges.

of

time, unplug it from the wall outlet

Service

Damage Requiring Service

Unplug the setfrom the wall outlet and refer servicing
to qualified service personnel under the following
conditions:

- When the power cord or plug is damaged or frayed.

-

If

liquid has been spilled or objects have fallen into

the set.

-

If

the set has been exposed to rainorwater.

-

If

the set has been subject to excessive shock by

or

being dropped,

the cabinet has been damaged.

Continued

3 GB

Do not expose the batteries to
excessive heat such as sunshine, fire
or the like.

CAUTION

Replace the battery with the specified

type only. Otherwise, fire or injury

may result.

For the customersinthe U.S.A.

CAUTION

You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.

If

you have any questions about this product, you may

call:
Sony Customer Information Services Center

I-BOO-222-S0NY (7669)

Declaration of Conformity

Trade Name: SONY
Model No.: DPF-V700
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with part

Rules. Operation is subject to the following two
conditions:

(I)

This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

15ofthe FCC

For the State of California, USA
only

Perchlorate Material- special handling may apply,
See

www.dtsc.ca.govlhazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains

perchlorate.

The number below is for the FCC related matters
only.

Regulatory Information

Declaration of Conformity

Trade Name: SONY

Model No.: DPF-V900
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with part

Rules. Operation is subject to the following two
conditions:

(I)

This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

15ofthe FCC

Note:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part

15ofthe FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there
interference will not occur in a particular installation.

If

this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the

is

encouraged to

user
one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV
technician for help.

try

to correct the interference by

isnoguarantee that

if

4 GB

"Lamp in this product contains mercury. Disposal

these materials may be regulated due to

environmental considerations. For disposal or

recycling information, please contact your local
authorities or the Electoronic Industries Alliance
(www.eiae.org)."

of

For the Customer in Europe

This product has been tested and found compliant
with the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).

Attention

The electromagnetic fields at the specific frequencies

may influence the picture

Notice

If

static electricityorelectromagnetism causes data

transfer to discontinue midway (fail), restart the

or

application
communication cable (USB, etc) again.

disconnect and connect the

Disposal of Old Electrical &
Electronic Equipment (Applicable

the European Union and other

European countries with separate
collection systems)

the environment and human health, which could
otherwise be caused by inappropriate waste handling
of

this product. The recyclingofmaterialswiII
conserve natural resources. For more detailed
information about recycling
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the

product.

Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)

This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not

)t

the environment and human health which could
otherwise be caused by inappropriate waste handling
of

the battery. The recyclingofthe materials will help
to conserve natural resources.
for safety, performance or data integrity reasons

be treated as household waste. By

• ensuring these batteries are disposed
of
potentially negative consequences for

of

this digital photo frame.

This symbol on the product
or on its packaging indicates
that this product shall not be
treated as household waste.
Instead it shall be handed
ove!!"

to the applicable

collection point for the

recycling
electronic equipment. By
ensuring this product is
disposed
will help prevent potential
negative consequences for

correctly, you will help prevent

of

electrical and

of

correctly, you

of

this product, please

In

caseofproducts that

help to

in

require a permanent connection with an incorporated
battery, this battery should be replaced

service staffonly. To ensure that the battery will be
treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling
electrical and electronic equipment. For all other
batteries, please view the section on how to remove
the battery from the product safely. Hand the battery
over to the applicable collection point for the
recycling

For more detailed information about recycling

product
Office, your household waste disposal service
shop where you purchased the product.

of

waste batteries.

or

battery, please contact your local Civic

by

qualified

or

of

of

this

the

Notice for the customersinthe

countries applying

The manufacturerofthis product is Sony

Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-

0075 Japan. The Authorized Representative for EMC

and product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart, Germany.

For any service or guarantee matters please refer to

the addresses given in separate service or guarantee

documents.

EU

Directives

NOTICE FOR CUSTOMERS IN

THE UNITED KINGDOM

A moulded plug complying with BS 1363 is fitted to
this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be

of

replaced, a fuse
and approved by ASTA
(i.e.marked with

If

the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without
the fuse cover.
please contact your nearest Sony service station.

Duplication, edition, or printing
programs, copyrighted materials such as pictures
publications, or any other materials except for your
own recording
domestic use only. Unless you hold copyright
have permissionofcopyright holders for the
materials to be duplicated, use
beyond this limit may infringe the provisions
copyright law and be subject to the copyright
holders claim for damages.

When using photo images with this digital photo
frame, pay special attention not to infringe the
provisions
use

or

modificationofthere's portrait

infringe their rights.
For some demonstrations, performances, or

exhibits, photography may be forbidden.

the same rating as the supplied one

or

BSI toBS1362,

~or~

If

you should lose the fuse cover,

or

of

the copyright law. Any unauthorized

mark) must be used.

of

a CD, TV

creation is limited to private or

of

those materials

may

Continued

of

also

or

or

the

5 GB

Backup recommendations

To avoid potential riskofdata loss caused by

of

accidental operation or malfunction
photo frame,
backup copy

we

recommend that you save a

of

your data.

the digital

Information

IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES

RESULTING FROM ANY DEFECTIVE
PRODUCT

OR

THE USE OF ANY PRODUCT.

• HDMI,
Interface are trademarks or registered trademarks
HDMI Licensing LLC.

• Microsoft, Windows, and Windows Vista are either
registered trademarks or trademarks
Corporation in the United States and/or other
countries.

• Macintosh and Mac
Apple Inc. in the United States and/or other
countries.

• Intel and Pentium are the registered trademarks or

• CompactFiash is a trademark

HOml,

trademarks

Corporation in the U.S.A.

and High-Definition Multimedia

OS

of

Intel Corporation.

of

Microsoft

are registered trademarks

of

SanDisk

of

of

Sony shall assume no responsibility for any

of

of

the

the

accidental or consequential damages or loss

recording contents which may be caused by use or
malfunction
card.

Notes on

• The displayed image on the screenisnot identical in
picture quality and colors with the printed image
because phosphor methods or profiles differ. Please
regard the displayed image as just a reference.

• Do not press against the LCD screen. The screen
may
malfunction.

• Exposing the LCD screen to direct sunlight for long
periods may cause malfunctions.

• The LCD screen is manufactured using extremely
high-precision technology, so over 99.99%
pixels are operational for effective use. However,
there may be some tiny black points and/or bright
points (white, red, blue or green in color) that
constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not
affect the printing in any way.

• Images may trail across on the LCD screen in a cold

location. This is not a malfunction.

of

the digital photo frame or memory

LCD

screen

be

discolored and that may cause a

•

.:i!?e-r

FUJIFILM Corporation.

....

i~'

or xD-Picture

Card™

is a trademark

of

l!)

•

~

is a trademarkofFotoNation Inc. in the

U.S.A.

•

SILKY

Laboratory .

• Contains bitmap fonts from Monotype Imaging Inc.

•

An

herein may be the trademarks or registered

trademarks

Furthermore,

each case in this manual.

• This unit is equipped with face recognition feature.
Sony Face Recognition technology developed by
Sony is used.

• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use
by Sony Corpration is under licence. Other
trademarks and trade names are those

resective owners.

PIX·

other companies and product names mentioned

of

is a trademarkofIchikawa Soft

their respective companies.

"TM"

and ,'@" are not mentioned in

of

of

such marks

their

On

trademarks and copyrights

•

S-Frame,

"PhotoTV
Stick",

MEMORY

MEMORY

Stick", "Memory Stick PRO",

MEMORY

MEMORY

Duo",
Micro",
ROM",

ML\GICGL\TE

trademarks

STI(K

STI(K

STICK

MEMORY

MEMORV5T1[K

MEMORYSTI[K-ROM,

BRAVIA, BRAVIA Sync,

HD",~,

PRO

STI(K,

Duo,

PRO,

STICK

Cyber-shot,

"Memory Stick Duo",

"MagicGate Memory

"Memory Stick PRO Duo",

Duo,

"Memory Stick PRO-HG

PRO-H6

MICRO,

are trademarks or registered

of

Sony Corporation.

6 GB

II,

..~.. "Memory

OUO,

"Memory Stick

M2,

"Memory Stick-

"MagicGate", and

Notice

Program © 2008 Sony Corporation
Documentation © 2008 Sony Corporation

All rights reserved. This manual or the software
described herein, in whole

reproduced, translated or reduced to any machine
readable form without prior written approval from
Sony Corporation.

IN NO EVENT SHALL SONY CORPORATION BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTACT, OR
OTHERWISE, ARISING OUT
CONNECTION WITH THIS MANUAL, THE
SOFTWARE OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE THEREOF.

By breaking the seal
package, you accept all the terms and conditions
this agreement.Ifyou do not accept these terms and

conditions, please return this disk envelope unopened,

along with the rest

dealer where you obtained it.

for

users

01' in part, may not be

OF

OR IN

of

the envelopeofthe CD-ROM

of

the package, immediately to the

of

Sony Corporation reserves the right to make any

or

modification to this manual
contained herein at any time without notice.

The software described herein may also be governed

of

by the terms

Any design data such
this software cannot be modified
for the purpose
duplication
copyright law.

Please note that unauthorized duplication

modificationofportraitsorcopyrighted work could
infringe the rights reserved by rights holders.

a separate user license agreement.

as

of

personal use. Any unauthorized

of

this software is prohibited under

the information

sample pictures provided in

or

duplicated except

or

On the illustrations and screen
shots used in this manual

The illustrations and screen shots used in this

of

manual are

otherwise.

the DPF-V900 unless noted

7 GB

Table

of

Contents

Deletinganimage
Changing

the

various

settings

32
33

Before

Enjoy
ways

Featu

Checking

Identifying

Basic

Preparing
Connectingtothe

source
Setting
Turning

operation

your

res

photo

included

the

parts

operations

the

remote

the

stand

the

photo

frameinvarious

items

control

AC

power

frame

on

10

12
13
13

16

17
18
19

Setting
Itemstoset

Connectingtoa
view

Connectingtoa

TV

Using

UsingaBluetooth

Transferring

device
Connectingtoa

System
Connectingtoa

images

procedure

images

an

requirements

high

external

images

computer

33

.34

definition

high

definition

TV

to

36

36

device

device

from

computertoexchange

an

external

38

38
39

39
40

Setting
Insertingamemory

images

Advanced

AUTO

Specifying
Adjusting

position

Addingtothe

Exportinganimage

the

clock

I

nsertinga

Displaying

memory

images

operations

TOUCH-UP

the

playback

the

image

Enlarginganimage
Rotatinganimage

internal

card

and

card

device

size

memory

and

19

viewing

20

20
22

27
28

28

28
28

29

31

Error

If

messages

an

error

message

appears

Troubleshooting

If

trouble

Additional

Precautions

On
On
On
On

occurs

information

safety
installation
cleaning
restrictionsonduplication

........

.41

43

47

47

.47

.47
.48

8 GB

About

the

memory

cards

.48

"Memory
SO

memory
xO-Picture
CompactFlash

Stick"

card

Card

card

Notesonusingamemory

Specifications
Index

.48

49
50
50

card

"

50

51

53

9 GB

Before

operation

Enjoy

1"

li:-

l...

_._..J"'·,i:

0

Easy
a

your

1

photo

displayofimagesina

digital

camera

frameinvarious

memory

cardorexternal

ways

device

such

as

Various display functions

In addition to slideshows, you can enjoy various display modes easily including the
single image, index, clock, and calendar modes.

Adding important images to an album (saving to the internal memory)

Images added to the album are saved in the internal memory. You can also export
these images to a memory card or external device.

Input to the photo frame

(~page

As shown on the left, the photo frame gives

priority in order
and memory card
cards are connected/inserted to the photo

frame.

the images

first are displayed.

If

22)

of

computer, external device,

if

computer and memory

multiple memory cards are inserted,

of

the memory card you inserted

10

GB

Enjoying images on a large TV screen

If

you connect the photo frame to a TV with an HDMI cable, you can enjoy

slideshows and single image display on a large screen.

I

Various devices you can use Connecting to your computer

Images can be copied from a computereasily.
You can also save images in the album to a
computer as a backup. Images can also be
exchanged with a memory card, USB memory,
etc. and copied from a Bluetooth compatible
device.

11

GB

Features

The Sony DPF­frame for easily displaying images taken with a
digital camera or other device without using a
computer.

• Support for various memory cards

Supports various memory cards used by
digital cameras and other devices, such as a
"Memory Stick", CompactFlash card, SD

memory card, and xD-Picture Card™. Just
insert a memory card removed from a digital
camera or other device, then you will be able
to view the images immediately.

• Easy transfer of images taken with a
Bluetooth compatible mobile phone
or other device

You can transfer images to the photo frame's
internal memory from a Bluetooth
compatible device via a Bluetooth adaptor
(optional).

• Support for mass storage compatible
devices

• Connecting to a high definition TV to
display images on a large screen

Using the photo frame's HDMI output
connector, you can enjoy the images in a
memory card, external device,
memory on a large screen.

• Various modes

The displayed image can be switched

automatically as though you are turning the
pages
from various modes including just images,
clock, and calendar view. You can also
change playback settings such as the display
order.

V900N700isa digital photo

or

internal

of

an album yourself. You can select

• Various display functions

You can enjoy various view modes, such as
displaying an analog clock, digital clock or
calendar. And the photo frame can display
images on single image display, index image
display, zoom in/zoom out or fit to screen

mode.

• Automatic rotation of images

The photo frame automatically rotates

images to their proper orientation. Images
are also automatically rotated when the
photo frame is set in either the portrait or
landscape position.

• Easy operation by remote control

• Adding images to internal memory

The images you add to the album are saved
to internal memory.

• Exporting images

You can export images in the album to your
memory card.

• AUTO TOUCH-UP features

You can enjoy beautiful images by

of

automatic corrections
red-eye, and skin smoothing.

• Connecting to a computer to

backlight, focus,

exchange the images

12

GB

Checking

included

Identifying

the

parts

items

Make sure that the following items are
included.

• Digital photo frame

• Remote control

• AC adaptor

• AC powercord

• Operating Instructions (this manual)

• Warranty
(In some regions, the warranty is not
supplied.)

(l)

(I)

(I)

(I)

(I)

(I)

For details, see the pages indicated in the
parentheses.

The illustrations are

locations and names
of

the DPF-V700 are identical to thoseofthe
DPF-V900, although the LCD screen size is
different.

of

the DPF-V900. The

of

buttons and connectors

Front

I

[I] LCD screen

[gJ

Remote sensor

When using the supplied remote control, point
it at this sensor.

Continued

13 GB

Rear

rn

Connector for
adaptor

You can transfer images wirelessly from a
BLUETOOTHTM compatible mobile phone
digital camera by connecting a Bluetooth
adaptor (optional: DPPA-BTI).
You can also connect a digital camera, USB
memory, or photo storage compatible with
USB mass storage.

(~page

'fUSB

38)

AlBluetooth

or

[ID

VIEW MODE button

[l]

Access lamp

[ID

"Memory Stick PRO" (Standard!
Duo) slot

[ID

CompactFlash card/Microdrive

(~page

slot

I1Q]

C>

(on/standby) button/(standby)

indicator

(~page

(~page

20)

20)

20)

[2J

'fUSB

(~page40)

Connect a USB cable when you want to use
the photo frame with a computer.

~

HDMI OUT (output) connector

(~page36)

Connect an HDMI cable when you want to
view images on a high definition TV.

[4]

DC

Insert the plugofthe supplied AC adaptor to
this jack, and connect the AC power cord to
the AC adaptor and the wall outlet.

~

Stand

miniB connector

IN

8.4 V jack

(~page

(~page

18)

17)

[j]

MENU button

Displays the menu.
You can use the menu to operate same
functionsofbuttons on remote control such as

[Slideshow], [Rotate], [Add to album] and
[Clock] from the menu.

1121

Direction (+/+) buttons

These buttons move the cursor.

~

-+-

ENTER button

!HI

Reset switch

l1§]

SO

memory card/MMC/xD-Picture

Card slot

(~page

20)

14 GB

Remote control

51----+1-

[I]

VIEW MODE button

[g]

e:>

(clock) button

~

~

(slideshow) button

@]

MENU button

[§] BACK button

I

[§J

c9

(on/standby) button

[l]

ttJ

(add to album) button

[ID

a:<

(zoom

[ID

~

(index) button

This button switches from the image preview

screen to index view screen.

I1Q]

Direction (+1.,.,+) buttons

[1]

-+-

(enter) button

[g]

r

OJ

in)/e<

(rotation) button (

(zoom out) buttons

.........

page 28)

Basic

Preparing

operations

the

remote

control

The supplied lithium battery (CR2025) has

already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.

Protective sheet

Replacing the battery of the
remote control

If

the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.

1 Pull out the battery holder.

While pressing in the tabofthe battery
holder, pull out the battery holder.

Using

Point the top endofthe remote control towards
the remote sensor on the photo frame.

the

remote

control

~

".-,..

~

~

Remote
sensor

~

(66\

i®

!@@@!

i

i G:!80 i

i 8"''-:'/

I

~~--_.

@i

ei~\~

~(~~!

__

.....

i

r;:;-../

!

2 Remove the old battery from the

battery holder and then insert a new
battery.

Insert the battery so that
upwards.

"+"

is

facing

3 Reinsert the battery holder into the

remote control.

WARNING

Battery may explodeifmistreated. Do not

of

recharge, disassemble or dispose

in fire.

• When the lithium battery becomes weak, the

-

operating distance
shorten, or the Remote control may not function
properly. In this case, replace the battery with a
Sony CR2025 lithium battery. Use
battery may present a risk

of

the Remote conrol may

of

of

fire or explosion.

another

• Using a battery other than tlte specified one may
result in the battery rupturing.

of

• Dispose
authorities.

•

Do

not leave the remote controlina very hot and

humid place.

• Take care that no foreign objects enter inside the
remote control when you, for example, replace the
battery.

• Incorrect use
corrosion.

- Do not recharge the battery.

- When the remote control will not be used for a
long period

remote control to prevent leaking and corrosion.

- Incorrectly inserting, shorting, dismantling,

heating the battery, or throwing it into a fire
may cause the battery to rupture and leak.

used batteries as specified by the local

of

the battery may cause leaking and

of

time, remove the battery from the

About descriptions in this
manual

or

Connecting

power

source

to

the

AC

1 Insert the plug of the AC adaptor

into the DC
of the photo frame.

2 Connect the AC power cord to the

AC adaptor and the wall outlet.

IN

8.4 V jackon the rear

I

The operations described in this manual are

based

on

remote control operation. When an
operation is performed differently with the
remote control and buttons on photo frame, it

will be explained in a tip.

Plug

Towalloutl~e

+

I.;

.....•

AC

~i

I I

L._J

adaptor

!

,.

..

• A socket outlet should be as close as possible to unit
and easily accessible.

• Do not place the photo frame in an unsteady

or

location such as on an uneven table

• Connect the AC adaptor to an easily accessible wall
outlet close by.
adaptor, immediately shut
disconnecting the plug from the wall outlet.

• Do not short the plug
metal object. Doing so may cause a malfunction.

• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.

• After use, remove the
DC IN 8.4 V jack
the AC power cord from the outlet.

If

trouble occurs while using the

off

the power by

of

the AC adaptor with a

AC

adaptor from the

of

the photo frame, and remove

tilted surface.

Continued

17 GB