Sony PVM-2950Q, PVM-2950QM Service Manual
DISPLAY
PRODUCTS
–161–
1-1 Color video monitors
PVM-2950Q (NTSC/PAL/SECAM/NTSC4.43)
Cubic Style Monitor
•Switchable aspect ratio(4:3 and 16:9) •A high resolution of
600TV lines •Beam current feedback circuit for stability in the
color balance •On-screen menu for adjustment/operation
•Accepts Composite video, Y/C, Component(Y/R-Y/B-Y or
RGB) signals •Supplied wireless remote control unit RM-854
controls all monitor functions
Supplied accessories: AC power cord, AC plug holder,
Remote controller RM-854,
Battery for RM-854, Operation manual
Optional accessories: Speakers: SS-X7A
TV tuner unit TU-1041U
Specifications
Video signal system: EIA 525 lines, 60 fields /CCIR 625 lines, 50 fields
(switching of EIA to CCIR or vice versa is
automatically done)
Color system: NTSC/PAL/SECAM/NTSC
4.43*
1
(automatically selected)
Picture tube:
72.9 cm (29-inch), Super Trinitron tube, visible picture
size 67.5 cm (27-inch) measured diagonally,
110° deflection
Horizontal resolution: 600TV lines
Audio power output: 7 W + 7 W, 8 to 16Ω
Power requirements: AC 120 V, 50/60 Hz
Power consumption: 165 W (typical)
Dimensions: 687 (W) ç 538 (H) ç 529 (D) mm
(27
1
/8 ç 211/4 ç 207/8 inches)
Mass: 52 kg (114 Ib 10 oz)
VIDEO
LINE 1/2
Composite*
2
: Loop-through BNC
1.0 Vp-p, sync negative, Automatic 75Ω termination*
3
Y/C*2: Loop-through 4-pin mini DIN
Y(luminance):
1 Vp-p, sync negative, Automatic 75Ω termination*
3
C(chrominance):
NTSC: 0.286 Vp-p, Automatic 75Ωtermination*
3
PAL: 0.3 Vp-p, Automatic 75Ω termination*
3
LINE 3
RGB/Component:
BNC
R/R-Y: 0.7 Vp-p, 75Ω
Sync on G/G/Y:
Composite: 1 Vp-p, sync negative, 75Ω
Non-composite: 0.7 Vp-p, 75Ω
B/B-Y: 0.7 Vp-p, 75Ω
Sync: Composite sync: BNC
Analog level:0.5 to 5 Vp-p, high impedance,
positive/negative
TTL level: positive/negative
HD/VD separate:
BNC
Analog level:0.5 to 5 Vp-p, high impedance,
positive/negative
TTL level: positive/negative
AUDIO
LINE 1/2 Loop-through Phono (ç2)
≈5 dBu, high impedance
LINE 3 Phono (ç2)
≈5 dBu, high impedance
RM-854
*1 The NTSC4.43 system refers to an NTSC color system in which the subcarrier frequency is modified to 4.43 MHz.
*2 Y/C input has priority over the Composite video input.
*3 75Ω termination is automatically set to OFF when connection is made to the OUT connector.
Loading...