Sony PVM-1354Q, PVM-1954Q Service Manual
PVM-1954Q/1354Q
Color Video Monitors
.Adopts SMPTE C standard phosphors
.Switchable aspect ratio (4:3 and 16:9)
.Accepts Component (Y, A-Y, B- Y)/AGB signals
.HA CAT assures a high resolution of 600 1V lines
.Beam current feedback circuit for stability in the
color balance
.Auto chroma/phase setup
.Optional component serial digital interface kits
BKM-1 01 C (video)/1 02 (audio) available
.On-screen display for adjustment/operation
.User preset function
.Color temperature 6500K/9300K/User preset selectable
(3200K to 10000K)
.Underscan, Blue Only and HN delay mode available
.Accepts external sync
.Caption vision decoder
.Auto/manual degaussing
.Mountable into a 19-inch EIA standard rack with the
optional SLA-103
Specifications
CAT performance
CRT type:
Screen size:
PVM-1954Q:
PVM-1354Q:
Color temperature'
Maximum brightness: 154cd/m' (45fL)
Raster and picture performance
Normal scan: 4 x 3 aspect ratio,
Underscan: 4 x 3 aspect ratio, approx -5%
Linearity of center H & V lines:
Horizontal:
Vertical:
Convergence:
PVM-1954Q:
PVM-1354Q:
HA Trinitron
Aperture grille (AG) pitch:
PVM-1954Q: O.4mm
PVM-1354Q: O.25mm
Center resolution: 600TV lines
SMPTE C standard phosphor
Diagonal 48.1 cm (19')
Width 38.6cm (15~")
Height 29.0cm (11 %')
Diagonal 33.2cm (13~')
Width 26.8cm (10%')
Height 20.1cm (8")
6500K, 9300K and user preset
(3200K to 10000K) is switch selectable
(factory preset 6500K)
blanked raster <+7%
picture and blanking boundaries
are displayed
Less than 8% (typical)
Less than 7% (typical)
Zone A: within 0.7mm (typical)
Zone B: within 1.3mm (typical)
Zone A: within 0.6mm (typical)
Zone B: within 0.8mm (typical)
Frequency lresponse RGB:
10MHz(-3dB)
Componen (Y/R-Y/B-Y):
Composite
Y/G input rJlode:
Aperture
O to 6dB 9 in at 4.5MHz
This contr I is intended for subjective enhancement of the
displayed ictures
i "tro' It provides ontinuous variable control of frequency response from
9MHz (-3dB)(Y signal)
9MHz (-3dB) (y signal with
comb filter)
9MHz (-3dB) (y signal)
Power inPJts 3-pin inlet ype power plug
Power req irements:
AC 100V to 240V
(UL approved for 120V operation),
50/60Hz
Power con
Remote/Ta Iy inputs:
PVM-13 40:
~ umption PVM-19 40:
115W (with BKM-101C/102:125W)
gow (with BKM-101C/102: g9W)
20-pin connector for input selection,
function control and tally control
Audio pow
Demodula r axes
tr output
O.8W, 8n, monaural
A-Y and B-Y (perpendicular to
each other)
synchroni
t tion Vertical ho range:
NTSC: 52 to 60Hz
PAUSECA :
Horizontal old'
42 to 50Hz
Horizontal oscillator locking range
Pull in range: :l:500Hz
AFC time ~nstants
Set at 1 ms
Physical c~aracteristics Weight:
PVM-19 40: 66 Ibs 2 oz (30.0kg)
PVM-13~4Q:
Dimension. (WHD):
PVM-19~4Q:
PVM-1354p:
(with BKM-101C/102: 31.0kg
(68 Ibs 5.5 oz))
361bs 13.1 oz (16.7kg)
(with BKM-101C/102: 17.7kg
(39 Ibs))
450 x 457.5 x 503mm
(17%" x 18%" x 19~")
346 x 340 x 411.5mm
(13%' x 13\6" x 16X")
PVM-1954Q/1354Q (CONTINUED)
Physical Characteristics (CONT)
Environmental:
Operating temperature: 0 to 35°C
!)torage temperature: -10 to 40°
t-jumidity: 0 to 90% non-condensing
Altitude: 10,000ft (3050m)
Safety regulation
Complies with UL-1950
Complies with CSA-22.2 No.950
ElEIctro magnetic compatibility:
Complies with FCC rules part 15 class A digital device
X-ray radiation:
Complies with DHHS rules 21 Subchapter J sec 1020 10
O ptional Accessories
BKM-101C
Gc,mponent serial digital interface kit (video)
BKM-102
Gc,mponent serial digital interface kit (audio)
Irlput Facilities
Video Inputs
BKM-103
Serial remote con
DMIF-2OQO
Composite digital
TU-1040
Tuner unit
SLR-102
trol it for RS-422
mo itor interface
~Slide rail (For mountin PVM-1354Q into a 19-inch EIA rack
with MB-502B)
SLR-103 I
Slide rail (For mountin~ PVM-1954Q into a 19-inch EIA rack)
MB-502B
~Rack mounting brack t (For mounting PVM-1354Q into a 1 g'. EIA
rack with SLR-102)
'1 RGB/Component (Y/R-Y/B-Y) is switch selectable.
'2 75.0. termination is automatically set to OFF when connection is
made to the OUT connector.
Audio Inputs
Loading...