Sony PS4 FORTNITE PRO Instruction Manual

PS4 FORTNITE PRO

Instruction Manual

VERVIEW

O

The FORTNITE PRO mod contains many options to enhance your
gameplay. Four of our reflex remapping buttons can be used to
quickly execute build commands, weapon switching, or standard
button remapping. With this mod our standard button remapping
has been improved to allow multiple buttons to be pressed from
one reflex button along with the ability to make these buttons
turbo.
In addition to the reflex buttons, you will also find our Rapid fire,
Crouch shot, Jump shot (bunny hop), Auto run and Aim assist. All of
these features have been customized specifically for Fortnite to
give you the advantage you have been searching for.
The FORTNITE PRO also supports all 4 button configs. Whether you
prefer old school or the default builder pro, we have you covered.

CCESS

A

Accessing the FORTNITE PRO features is easy. Hold
the touchpad and tap a standard controller button
to quickly turn features on/off. You will also see
visual feedback with a green LED in the center of
the touchpad lightbar.

APID FIRE

R ROUCH SHOT

Rapid fire gives pistols in Fortnite that extra
kick they need to compete with the big guns.
The rapid fire is set at a fixed speed perfect
for Fortnite pistols. This feature has 2
options, standard rapid fire and 3-round burst
fire.
To activate standard rapid fire hold the
touchpad and single pull the right trigger. For
3-round burst hold the touchpad and pull the
right trigger twice.

STANDARD RAPID FIRE

HOLD PULL

3-ROUND BURST FIRE

HOLD PULL 2x

C

Crouch shot allows you to quickly drop to
crouched position as soon as you start firing
and stand back up as soon as you stop firing.
With this feature you can bob up and down
while firing causing your opponent to shoot
over your head.
This feature cannot be used at the same time
as jump shot. Turning this feature on while
jump shot is already on will automatically turn
off jump shot.
To activate crouch shot hold the touchpad
and tap R3 (Right thumbstick click).

CROUCH SHOT

HOLD TAP

UMP SHOT

J

Jump shot will make you continuously jump
while firing, making you a much harder target
to hit. This feature has 2 options. The first
stops you from jumping if you ADS (aim down
the sights). Activate by holding the touchpad
and tapping X once. With the second option
you will always jump. Activate by holding the
touchpad and tapping X twice.
This feature cannot be used at the same time
as crouch shot. Turning this feature on while
crouch shot is already on will automatically
turn off crouch shot.

JUMP SHOT WITH PAUSE WHILE ADS

HOLD TAP

JUMP SHOT ALWAYS

HOLD TAP 2x

UTO RUN

A

Auto run is different than the in game auto
run. When enabled you will always run while
moving, but stop when you release the
thumbstick. There is no need to tap L3 except
to turn this feature on or off making it much
more functional than the built in game auto
run.
To activate auto run hold the touchpad and
tap L3 (Left thumbstick click).

AUTO RUN

HOLD TAP

IM ASSIST

A

When aim assist is turned on and you press L2
to ADS (Aim Down the Sights) the mod uses
precise timing to press and release L2. This will
cause you to continuously try to relock onto
your target. Fortnite received an update mid
2018 which made aim assist less effective,
however, this mod is still useful to help lock
onto a target for players of all skill levels.

This feature requires aim assist to be enabled
in the game settings.

To activate aim assist hold the touchpad and
pull L2.

AIM ASSIST

HOLD PULL

EFLEX REMAPPING BUTTONSR

Reflex remapping buttons are buttons or paddles on the back of the controller which can automatically
perform functions within the game or be mapped to standard controller buttons. These buttons default
to quick building options, however they can be changed to different functions within the programming
mode. Below is a list of all functions and how they operate.

• QUICK BUILD MACROS – There are 4 build options within the game (Wall, Floor, Roof, Ramp) these

can be assigned to any of the reflex buttons. When assigned you can quickly tap to build the

REFLEX

BUTTONS

structure or hold the to continuously build while moving. When you release the button you are
automatically switched back to combat mode.

• Please note that for the build options to work in old school or quick build button layouts you must enable the “reset the building choice” option
in the Fortnite game settings.

• 1st/ LAST WEAPON SELECT – There are 2 assignable options for this feature. If you assign the 1stweapon select, when tapping the reflex button the first

weapon in your inventory will automatically be selected regardless of what weapon is currently equipped. Similarly when the last weapon select is
assigned to the reflex button, when tapping the button the last weapon in your inventory will be selected. If you have only 3 weapons the 3rdweapon is
select, if you have 5 weapons the 5this selected.

• Please note these options do NOT work for old school or quick build button layouts .

• STANDARD BUTTON REMAPPING – Instead of the macros described above you can assign standard controller buttons to the reflex buttons, all buttons,

triggers and D-pad directions can be assigned to the reflex buttons (except for the share, options and PS buttons). Multiple buttons can be assigned to one
reflex button, for example X, R2, L1 and UP on the D-pad could all be assigned to one reflex button and when the reflex button is pressed all 4 of those
controller buttons would be pressed at the same time. In addition, when the reflex buttons are used for remapping, you can set the button to one of 3
turbo speed settings or a standard solid press.

ROGRAMMING MODE

P

Within the programming mode you can setup the reflex buttons for different build options or as remapping buttons. You can also enable/disable the other
controller features such as Rapid fire or Jump shot.

• To Enter the programming mode HOLD R1 + R2 + L1 + L2 for 8 seconds, the green LED will make one long flash.

HOLD ALL FOR 8 SECONDS

• To assign a build or weapon select macro to a reflex button first hold the button described below for the macro option and then tap the reflex button you
would like to assign it to. The green LED will flash once to acknowledge your selection.

• BUILD FLOOR -

• BUILD WALL -

• BUILD ROOF -

HOLD

HOLD

HOLD

REFLEX

TAP

REFLEX

TAP

REFLEX

TAP

• BUILD RAMP -

• 1STWEAPON -

• LAST WEAPON -

HOLD

HOLD

HOLD

REFLEX

TAP

REFLEX

TAP

REFLEX

TAP

• To Configure a reflex button for standard remapping, press and hold a reflex button, while holding tap any button you
would like to assign, this can be multiple buttons if you like.

• Example 1: Hold reflex button, tap triangle, release reflex button. The reflex button now functions as Triangle

• Example 2 : Hold reflex button, tap X, tap R1, tap UP on D-pad, release reflex button. When the reflex button is

pressed, X, R1 and UP are all pressed on the controller at the same time.

• To make a reflex button turbo hold DOWN on the D-pad and tap the reflex button you would like to make turbo. There are
4 setting that will be cycled through as you tap the reflex button. The LED will flash 1-4 times to indicate the setting.

• 1 Flash = No Turbo 2 Flashes = 5sps Turbo 3 Flashes = 10sps Turbo 4 Flashes = 15sps Turbo

• To change the button layout, tap UP on D-pad, the LED will flash 1-4 times to indicate the setting. (Default = Builder Pro)

• 1 Flash = Builder Pro 2 Flashes = Combat Pro 3 Flashes = Quick Builder 4 Flashes = Old School

• To disable/enable mod feature just tap the button indicated below. When a feature is disabled you will not be able to turn

it on. This is useful when there is a feature you will not use and you want to be sure you cannot turn it on by accident.

Enable/Disable

Jump Shot

TAP

Enable/Disable

Rapid Fire

TAP

• To exit the programming mode just tap the touchpad.

TAP

TAP

Enable/Disable

Crouch Shot

TAP

Enable/Disable

Auto Aim

• MASTER RESET – To reset the mod to default settings, turn off the controller hold X + Triangle

+ Circle + Square and turn on the controller. You will see the LED flash very fast 10 times.

HOLD ALL BUTTONS WHILE TURNING ON CONTROLLER

TAP

REFLEX

HOLD

HOLD

TAP

Enable/Disable

Auto Run

TAP ANY

BUTTON(S)

REFLEX

TAP