Sony PRS-300 User Manual [ru]
Quick Start
Démarrage rapide
4-151-149-12 (1)©2009 Sony Corporation Printed in China
2
EN
3 EN
Navigation Controls
“Home” menu
Getting Started
“USB connected” screen
(Home) button
Displays the “Home” menu.
(Return) button
Displays the previous menu/list
screen.
/// (Cursor Move/Page
Turn) buttons
Enter button
Selects an item or applies a
setting.
(Bookmark) button
(Size) button
Number (1-9,0) buttons
Selects the numbered items.
Charge indicator
Lights up in red while charging
POWER switch
USB connector
DC IN jack
Used to connect the AC
Adapter (AC-S5220E)
(optional).
RESET button
Connect to
USB connector
USB cable (supplied)
To AC outlet
1 Charge the Reader via USB (as shown above) at least 40 minutes
until “USB connected” appears on the Reader.
Keep your computer in an active mode while charging the Reader.
To fully charge the Reader, wait about 3.5 hours or less until the
charge indicator (lights up in red while charging) goes off.
2 Disconnect the Reader from your computer, and then follow the
on-screen instructions of the Reader to complete the initial
settings.
Use the / buttons to move the cursor and the Enter button to select.
To apply the setting, select “OK” with the Enter button.
Note
You cannot operate the Reader while it is connected to your computer.
4
EN
5 EN
Reading eBooks
Book list “Options” menu
Getting eBooks
To purchase or download eBooks, install eBook Library software on your
computer and register to the eBook store.
When the Reader is connected to your PC, the AutoPlay window appears
on the screen.
1 Click “Install eBook Library” in the “Installer for Reader” window,
and then follow the on-screen instructions.
AutoPlay window
(in case of Windows Vista)
1 Press the (Home) button to display the “Home” menu (
2), and then press the number 2 button to display the Book list.
page
2 Press the number button of the desired eBook to display the
“Options” menu.
3 Press the number 2 button to begin reading. To turn pages, press
the / buttons.
Hints
You can also select the numbered items by using the / buttons to move
the cursor and the Enter button to select.
To return to the previous menu, press the (Return) button.
If the AutoPlay feature is disabled, start the install launcher manually.
From the Start menu, click the following: “My Computer”(“Computer” in
the case of Vista) – “Installer for Reader” – “Windows” – “Setup eBook
Library”
To install eBook Library on a Macintosh
When the Reader is connected to your Mac, “LAUNCHER” and
“READER” appear on the desktop. Click the following, and then follow
the on-screen instructions: “LAUNCHER” – “Mac” – “Setup eBook
Library”
2 Start eBook Library, and then click “eBook Store.”
“eBook Store”
Loading...