Sony PFM-32C1 User Manual
Installation and Assembly - Plasma Adapter bracket for
Sony™ PFM-32C1 Plasma Monitor
Model: PLP SONY32PRO
Parts List
PARTS LIST
PART # QTY. DESCRIPTION
AA 200-1661 1 adapter bracket
BB 520-1021 2 M5 x 35 mm socket pin screw
CC 520-1063 4 M5 x .8 x 10 mm socket pin screw bolt
DD 590-1135 2 nylon spacer
EE 560-9646 1 4 mm allen wrench
Some parts may appear slightly different than illustrated.
Place four keyhole slots of adapter plate (AA) over four knobs in back of monitor and slide upwards to lock into
place. Place two spacers (DD) over the threaded inserts in back of plasma, and fasten adapter plate (AA) to
back of plasma using two M5 screws (BB). Tighten M5 screws using 4mm allen wrench (EE).
AA
DD
EE
BB
Used with specific
mounts only
CC
WARNING
• Do not overtighten. Overtightening may cause permanent damage to screen. T orque to 26-35 in. / lb. (30-40 kg /
cm).
DD
BB
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
AA
1 of 1
ISSUED: 03-25-02 SHEET #: 200-9337-4 9-26-05
Loading...