Sony PEG-TJ25, PEG- TJ35 README
3-087-353-21 (1)
Setting up your
1
CLIÉ™ handheld
Basic operations of
2
your CLIÉ™ handheld
Using CLIÉ Manuals
3
with your computer
Read
This
First
Operating Instructions
Personal Entertainment Organizer
Troubleshooting
CLIÉ™ handheld
components
PEG-TJ35
PEG-TJ25
© 2003 Sony Corporation
The following manuals are included with your CLIÉ handheld.
Refer to the following together with this manual.
Printed manual
Read This First (Operating Instructions), this manual
Explains how to set up your CLIÉ handheld and computer, and basic operations.
For safe use, make sure you read the supplied “Safety & Regulations
Guide”.
Manuals to be read on your computer
The following manuals are automatically installed on your computer after you set up
your CLIÉ handheld and computer.
b For details on each manual, refer to “Using CLIÉ Manuals with your computer” on page 37.
Applications Guide (PDF format*)
Introduces the supplied applications and briefly explains how to use them.
Handbook (PDF format*)
Explains the basic operations and advanced features of your CLIÉ handheld.
CLIÉ Application Manual (HTML format**)
Explains how to use the supplied applications in detail.
Troubleshooting Q&A (PDF format*)
Helps in solving common problems that you may have while using your CLIÉ
handheld.
* You can read the manual on your computer using Adobe Acrobat Reader. If
Adobe Acrobat Reader is not installed on your computer, install it from the
supplied Installation CD-ROM.
** You can read the manual on your computer using an Internet browser.
2
Before use
Caution
IN NO EVENT SHALL SONY BE LIABLE FOR
ANY INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OR OTHER
DAMAGES INCLUDING WITHOUT
LIMITATION LOSS OF PROFITS, LOSS OF
REVENUE, LOSS OF DATA, LOSS OF USE
OF THE PRODUCT OR ANY ASSOCIATED
EQUIPMENT, DOWNTIME, AND
PURCHASER’S TIME RELATED TO OR
ARISING OUT OF THE USE OF THIS
PRODUCT, ITS HARDWARE AND/OR ITS
SOFTWARE.
On the supplied software
• Copyright laws prohibit reproducing the
software or the software manual in whole or
in part or renting the software without the
permission of the copyright holder.
• In no event will SONY be liable for any
financial damage or loss of profits, including
claims made by third parties, arising out of
the use of the software supplied with this
product.
• In the event a problem occurs with this
software as a result of defective
manufacturing, SONY will replace it at
SONY’s option or issue a refund. However,
SONY bears no other responsibility.
• The software provided with this product
cannot be used with equipment other than
that which it is designated for use with.
• Please note that, due to continued efforts to
improve quality, the software specifications
may be changed without notice.
• The software library incorporated in the
CLIÉ handheld is based i n part on the work of
the Independent JPEG Group.
NOTES
• Sony does not support third party add-on
applications. If you have a problem with a
third party application, please contact the
developer or publisher of that software.
• The illustrations in this manual may differ
from the actual software.
• Explanations in this manual assume that you
are familiar with basic operations of
®
Windows
and operating system, please refer to their
respective manuals.
Program © 2003 Sony Corporation, © 2003
PalmSource, Inc., or its subsidiaries. All rights
reserved.
Documentation © 2003 Sony Corporation
. For how to use your computer
3
Table of Contents
Setting up your CLIÉ™ handheld
Confirming the package
contents . . . . . . . . . . . . . . . . 6
Setting up your CLIÉ™
handheld. . . . . . . . . . . . . . . . 8
Step 1: Charging your CLIÉ handheld . . . . . . 8
Step 2: Performing the initial setup after
turning on your CLIÉ handheld
for the first time. . . . . . . . . . . . . . . . . . . . . 9
Using your CLIÉ™ handheld with
your computer . . . . . . . . . . . .16
Step 1: Installing the software on your
computer . . . . . . . . . . . . . . . . . . . . . . . . . 16
Step 2: Registering your CLIÉ handheld. . . . 19
Step 3: Connecting your CLIÉ handheld and
computer via the USB cable. . . . . . . . . . . 20
Step 4: Entering a user name for your CLIÉ
handheld . . . . . . . . . . . . . . . . . . . . . . . . . 21
Installing the supplied applications
on your CLIÉ™ handheld . . . . .22
Basic operations of your CLIÉ™
handheld
Turning on/off your CLIÉ™
handheld. . . . . . . . . . . . . . . .23
Turning on your CLIÉ handheld . . . . . . . . . . 23
Starting an application . . . . . . .24
Using the Jog Dial™ navigator and /
(the Left/Right buttons) . . . . . . . . . . . . . . 24
Other ways to start an application . . . . . . . . 26
Entering text. . . . . . . . . . . . . . .28
Using Graffiti® 2 writing to enter text. . . . . . 28
Other ways to enter text. . . . . . . . . . . . . . . . 30
Synchronizing data between your
CLIÉ handheld and computer
®
(the HotSync
operation). . . . .31
Restarting your CLIÉ™
handheld. . . . . . . . . . . . . . . .34
Using CLIÉ Manuals with your
computer
Manuals Overview . . . . . . . . . . . . . . . . . . . . 37
Opening CLIÉ Manuals . . . . . . . . . . . . . . . . 39
Reading the PDF manuals on your
computer. . . . . . . . . . . . . . . . . . . . . . . . . 40
Reading the HTML manual on your computer
(CLIÉ Application Manual). . . . . . . . . . . . 41
Troubleshooting
Making a backup of the data or applications on
your CLIÉ handheld. . . . . . . . . . . . . . . . . 43
Frequently Asked Questions. . . . . . . . . . . . . 44
Customer Support and
Customer Registration. . . . . . . . . . . . . . . 54
Notes on use . . . . . . . . . . . . . . . . . . . . . . . . 55
Specifications . . . . . . . . . . . . . . . . . . . . . . . 59
CLIÉ™ handheld components
Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . 61
Back panel . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Locating the components of the CLIE
Launcher . . . . . . . . . . . . . . . . . . . . . . . . . 67
INDEX. . . . . . . . . . . . . . . . . . . .72
4
Notes on this manual
• This manual supports PEG-TJ35 and PEG-TJ25.
– The illustrations in this manual are for PEG-TJ35, unless specified otherwise.
– Differences between PEG-TJ35 and PEG-TJ25 are specified in each corresponding
section.
• Screen shots in this manual may be different from the actual displays in the supplied
software.
• The contents of this manual are written for users with a working knowledge of
Windows
®
. For details on computer operations, refer to your computer manual.
About LCD display
The LCD of your CLIÉ handheld is designed with precision technology. However, in
some cases, individual pixels may remain lit or may not light at all. Also, the brightness
of the display may appear inconsistent, depending on the angle of view. Such anomalies
are caused by the nature of the LCD and do not indicate a malfunction.
Please note that Sony does not guarantee a replacement or refund for such cases.
Do not expose the LCD to direct sunlight for prolonged periods of time. It may result in
a malfunction. Do not store your CLIÉ handheld in areas subject to sunlight, such as near
windows, and be careful when using outdoors.
5
Setting up your CLIÉ™ handheld
This chapter explains how to charge your CLIÉ handheld, perform the initial setup, and use
it with your computer.
Confirming the package contents
Please confirm that all the following accessories are included in the package before
setting up your CLIÉ handheld.
CLIÉ handheld (1) AC power adapter (1)
AC cord (2)
USB cable (1) Stylus (1)
The stylus is inserted into your CLIÉ
handheld at the factory.
Plug adapter (1) Protective soft cover (1)
6
Installation CD-ROM (1)
Strap (1)
Refer to the illustration below to attach the strap.
Read This First - Operating Instructions (1, this manual)
Safety & Regulations Guide (1)
Software licence agreement (1)
Graffiti 2 Card (1)
Other printed materials
Make sure that the package contains all of the above contents. If any item is missing,
contact the Sony Customer Information Service Centre or a Sony dealer.
Use the strap to avoid dropping your CLIÉ handheld
Setting up your CLIÉ™ handheld
Attaching the strap
7
Setting up your CLIÉ™ handheld
Perform the following before setting up your CLIÉ handheld.
Step 1: Charging your CLIÉ handheld
Before using your CLIÉ handheld for the first time,
make sure you fully charge the battery.
To a wall
outlet
1
Connect the AC power adapter to the DC IN connector of
the plug adapter.
2
Connect the plug adapter to the interface connector of
your CLIÉ handheld .
3
Connect the AC cord to the AC power adapter (1). Then,
plug the AC cord into a wall outlet (2).
The POWER LED of your CLIÉ handheld turns on when charging starts.
It takes about four hours to fully charge your CLIÉ handheld for the first time.
The POWER LED turns off when charging is complete.
Tip
Subsequent charges will require less time if you charge your CLIÉ handheld
frequently.
8
Note
If the battery of your CLIÉ handheld is completely discharged, all user data stored
on your CLIÉ handheld will be lost.
How to remove the plug adapter
Remove by pressing the plug adapter on both sides as illustrated.
Step 2: Performing the initial setup after
turning on your CLIÉ handheld for
the first time
The first time you turn on your CLIÉ handheld, you need to make some initial
settings. Follow the on-screen instructions to complete the initial setup and to
become familiar with operations of your CLIÉ handheld.
1
Slide down the POWER/HOLD switch.
Your CLIÉ handheld turns on, and the following screen is displayed*.
Setting up your CLIÉ™ handheld
b
Slide down the POWER/HOLD switch
* The screen may be different depending on the country or area where your CLIÉ
handheld is sold.
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
9
Tips
If you cannot turn on your CLIÉ handheld
• Did you charge your CLIÉ handheld as described on page 8?
b For details, refer to “Frequently Asked Questions: I cannot turn on my
CLIÉ handheld” on page 46.
• Perform a soft reset if you cannot turn on your CLIÉ handheld even after
charging it (page 34).
2
Take out the stylus.
You can use the stylus to enter text
or to select applications.
Tip
You can extend or shorten the
stylus, as shown in the
illustration.
Take out the stylus
10
Notes
• Never use a writing pen, pencil, or other sharp object instead of the stylus to
write on your CLIÉ handheld, as the screen may get scratched.
• When you put the stylus back in its holder, push it in until it clicks into place.
3
Following the on-screen instructions, tap exactly in the
centre of the displayed mark.
Tap the next targets, which are displayed at the bottom right and then in the
centre of the screen.
Press lightly on the screen (Tap)
Note
If the stylus digitizer is not configured correctly, the scroll bar may not operate
properly, “tapping” may not work as expected, or other problems may occur.
b For details on reconfiguring the stylus digitizer, refer to “Customizing your
CLIÉ™ handheld (Preferences): Adjusting the Digitizer” in the “Handbook”
(PDF format).
After the stylus adjustment is complete, a screen for selecting your
language is displayed.
4
Select your language.
The Important screen is displayed.
Setting up your CLIÉ™ handheld
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
11
5
Click [Yes] to confirm.
6
Tap the box next to [Set Time:].
The Set Time dialogue box is displayed.
Tip
You can reconfigure the date and time
settings in the Preferences screen.
b For details, refer to “Customizing your
CLIÉ™ handheld (Preferences): Setting
up the Date & Time preferences” in the
“Handbook” (PDF format).
7
Tap v or V to set the current time.
Tap each box to set the hour and
minute.
12
8
Tap [OK].
The current time is set and the
Setup screen is displayed.
9
Tap the box next to [Set Date:].
The Set Date screen is displayed.
10
Tap b or B to select the current year.
11
Tap the current month, then tap the current date.
The Set Date screen closes.
12
Tap the box next to [Time Zone:].
The Set Time Zone screen is displayed.
13
Tap the region to set the time zone, then tap [OK].
Setting up your CLIÉ™ handheld
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
13
14
Tap V next to [Daylight Saving:] and select [On] or [Off].
15
Tap [Next].
14
16
Tap [Next] and [Done].
The CLIE Launcher is displayed.
The initial setup is complete.
Setting up your CLIÉ™ handheld
b
15
Using your CLIÉ™ handheld with your computer
Palm™ Desktop for CLIÉ stored on the supplied Installation CD-ROM
must be installed on your computer. The software is used for data transfer
between your CLIÉ handheld and computer, and handling data on your
computer such as Address Book.
b For details on the system requirements of computer, refer to “System requirements”
on page 60.
When Palm™ Desktop for CLIÉ is installed on your computer, CLIÉ
Manuals is also installed on your computer.
b For details on CLIÉ Manuals, refer to “Using CLIÉ Manuals with your computer”
(page 37).
Step 1: Installing the software on your
computer
Do not connect your CLIÉ handheld to your computer
before installing the software. Otherwise, the
software may not be installed properly.
Notes
• Do not simply copy the Palm™ Desktop for CLIÉ folder from the supplied
Installation CD-ROM to your computer. To install the software properly, follow
the installation procedure described below.
16
• If you use Windows 2000 Professional or Windows XP, log on with a User Name
in the Administrators group before installing the software.
• If you have more than one CLIÉ handheld and the older version of Palm™
Desktop for CLIÉ has already been installed on your computer, follow the
installation procedure below to upgrade to the new version.
* If you are using PEG-S300 Series, refer to your CLIÉ handheld support
website. (Refer to the URL shown on the back cover of this manual.)
b For details, refer to “Transferring data from another CLIÉ™ handheld” in the
“Handbook” (PDF format).
1
Quit all applications running on Windows®.
2
Insert the supplied Installation CD-ROM into the CD-ROM
drive of your computer.
The Installation CD-ROM window is displayed.
3
Select your language.
4
Click [Next] or [CLIÉ Basic], then click [Install] to install
Palm™ Desktop for CLIÉ.
The setup programme starts and the InstallShield Wizard window is
displayed.
Note
If you try to install Palm™ Desktop for CLIÉ when an older version of
Palm™ Desktop for CLIÉ has already been installed on your computer, a
dialogue box appears on your computer window.
Follow the instruction of the dialogue box to install the new version of Palm™
Desktop for CLIE supplied with your CLIÉ handheld.
5
Click [Next].
The InstallShield Wizard window for [Setup Type] is displayed.
6
Select the setup type, [Complete] or [Custom].
When you select [Custom], you need to specify which software you want
to install and where to be installed.
The following steps explain when you select [Complete].
Setting up your CLIÉ™ handheld
7
Click [Next].
The InstallShield Wizard window for [Select User] is displayed.
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
17
8
Enter a user name and click [Next].
The InstallShield Wizard window for [Ready to Install the Program] is
displayed after entering any user name you prefer.
Note
If you have more than one CLIÉ handheld
Enter a user name that is different from the one you use for another CLIÉ
handheld.
If you set an identical user name for multiple CLIÉ handhelds, errors may occur.
Tip
If you want to transfer data between CLIÉ handhelds
Refer to “Transferring data from another CLIÉ™ handheld” in the “Handbook”
(PDF format).
9
Click [Install].
Installation of Palm™ Desktop for CLIÉ starts.
“InstallShield Wizard Completed” message is displayed in the
InstallShield Wizard window when the installation is complete.
10
Click [Finish].
The Sony CLIÉ Handheld Registration window is displayed.
Tip
If you do not want to sign up for the customer service, click to deselect
[Register your CLIÉ].
18
Note
The window is for customers in Europe. For customers in Canada and Mexico,
double-click (CLIÉ Info) on the Windows desktop and select [Sony
CLIÉ™ Registration] to register your CLIÉ handheld.
Installation of Palm™ Desktop for CLIÉ on your computer
is complete.
If you want to register your CLIÉ handheld, go to “Step 2:
Registering your CLIÉ handheld”.
Step 2: Registering your CLIÉ handheld
You can register your CLIÉ handheld after installing Palm™ Desktop for
CLIÉ by following the on-screen instructions.
With your permission, Sony will keep you informed of special opportunities.
Also, your registration information helps Sony assist you if you call for
customer support.
All of the information you provide is confidential.
Note
To register your CLIÉ handheld online, you need to have an access to the Internet.
Tip
If you want to register your CLIÉ handheld later, click at the right top of the
Sony CLIÉ Handheld Registration window to close.
When you complete the registration and close the Sony CLIÉ Handheld
Registration window, the Installation CD-ROM window is displayed.
Other way to register your CLIÉ handheld
You can register your CLIÉ handheld online by clicking [Start], selecting
[Programs] ([All Programs] for Windows XP)-[Sony Handheld]-[About PEGTJ35_TJ25], and clicking [CLIÉ Registration].
Setting up your CLIÉ™ handheld
19
Step 3: Connecting your CLIÉ handheld and
computer via the USB cable
You can synchronize data between your CLIÉ handheld and computer by
connecting them with the supplied USB cable after installing Palm™
Desktop for CLIÉ.
About the USB cable
The supplied USB cable has two connectors. Connect the “A” plug to the USB
port of your computer and the mini “B” plug to the plug adapter.
“A” plug mini “B” plug
1
Connect the mini “B” plug of the USB cable to the plug
adapter (1), then connect the plug adapter to the
interface connector of your CLIÉ handheld (2).
20
2
Connect the “A” plug of the USB cable to the USB port of
your computer.
To the USB port of
your computer
Note
Make sure you connect the USB cable directly to a USB port of your computer.
If the USB cable is connected to a computer via another device, such as a USB
hub, the HotSync
®
operation may not work properly.
Step 4: Entering a user name for your CLIÉ
handheld
1
Rotate the Jog Dial™ navigator to select (HotSync) on
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap (HotSync) to display the HotSync screen.
2
Tap (HotSync) in the HotSync screen.
The HotSync® operation starts and the installation for the required
software starts automatically.
3
Click [OK] when your user name is displayed in the Users
window of your computer.
A beep is heard and the HotSync® operation starts.
Your user name entered for Palm™ Desktop for CLIÉ is also registered
in your CLIÉ handheld.
When the setup is complete, “HotSync operation complete.” will be
displayed on your CLIÉ handheld.
4
Click [Finish] in the Installation CD-ROM window of your
computer.
The setup is complete.
Setting up your CLIÉ™ handheld
21
Installing the supplied applications on your CLIÉ™ handheld
You can install applications from the supplied Installation CD-ROM by
following the procedure below.
You must install Palm™ Desktop for CLIÉ on your computer, before
installing the supplied applications on your CLIÉ handheld. Your CLIÉ
handheld must be connected to your computer via the USB cable.
b For details on supplied applications, refer to the “CLIÉ Application Manual” (HTML
format).
Note
The supplied applications are designed to operate on your CLIÉ handheld only.
Compatibility with other CLIÉ handhelds or Palm OS
Installing the supplied applications from
the supplied Installation CD-ROM
1
Quit all applications running on Windows®.
2
Insert the supplied Installation CD-ROM into the CD-ROM
drive of your computer.
The Installation CD-ROM window is displayed.
3
Select the type of application you want to install, such as
[CLIÉ Data Management].
®
PDAs is not guaranteed.
22
4
Click [Install] to install the application.
Follow the on-screen instructions.
5
To install the application on your CLIÉ handheld, tap
(HotSync) in the HotSync screen.
The HotSync® operation starts and the selected application is transferred
and installed on your CLIÉ handheld.
6
Click [Finish] in the Installation CD-ROM window of your
computer.
Tip
You can also install applications on your CLIÉ handheld using the function of Palm™
Desktop for CLIÉ.
b For details, refer to “Enhancing features with add-on applications: Installing:
Installing from your computer” in the “Handbook” (PDF format).
Basic operations of your CLIÉ™ handheld
This chapter explains how to turn on/off your CLIÉ handheld, start an application, enter text,
and perform a reset.
Turning on/off your CLIÉ™ handheld
Turning on your CLIÉ handheld
Slide down the POWER/HOLD switch.
Your CLIÉ handheld turns on, and the last screen you viewed is displayed.
Basic operations of your CLIÉ™ handheld
Slide down the POWER/HOLD switch
Tip
If you cannot turn on your CLIÉ handheld
Did you fully charge your CLIÉ handheld?
b For details, refer to “Frequently Asked Questions: I cannot turn on my CLIÉ
handheld” on page 46.
To turn off your CLIÉ handheld
Slide down the POWER/HOLD switch again.
23
Loading...