Sony PCG-VX89K, PCG-VX89P User Manual

PCG-VX89/VX89K/VX89P

SERVICE MANUAL

Ver 1-2002J

Revision History

Lineup : PCG-VX89P

PCG-VX89K PCG-VX89

Illust : PCG-VX89P

For American Area

US Model

Canadian Model

S400

Confidential

• Design and specifications are subject to change without notice.

9-876-021-01

NOTEBOOK COMPUTER

Information in this document is subject to change without notice.

Sony, VAIO and CLIE are trademarks or registered trademarks of

Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf

and other Microsoft products are trademarks or registered trademarks

of Microsoft Corporation in the United States and other countries.

The word Bluetooth and the Bluetooth logo are trademarks of

Bluetooth SIG, Inc. AMD, AMD logo, AMD Duron and

combinations thereof, 3DNow!, are trademarks of Advanced Micro

Devices, Inc. Intel Inside logo, Pentium and Celeron are trademarks

or registered trademarks of Intel Corporation. Transmeta, the

Transmeta logo, Crusoe Processor, the Crusoe logo and

combinations thereof are trademarks of Transmeta Corporation in

the USA and other countries. Graffiti, HotSync, PalmModem, and

Palm OS are resistered trademarks, and the Hotsync logo and Palm

are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola

are trademarks of Motrora, Inc. Other Motrola products and services

with (R) mark like Dragomball are the trademarks of Motrola, Inc.

All other names of systems, products and services in this manual

are trademarks or registered trademarks of their respective owners.

In this manual, the (TM) or (R) mark are not specified.

Caution Markings for Lithium/Ion Battery - The following or similar

texts shall be provided on battery pack of equipment or in both the

operating and the service instructions.

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by

the manufacturer. Discard used batteries according to the

manufacturer’s instructions.

CAUTION: The battery pack used in this device may present a fire

or chemical burn hazard if mistreated. Do not disassemble, heat

above 100°C (212°F) or incinerate.

Dispose of used battery promptly.

Keep away from children.

CAUTION: Changing the back up battery.

• Overcharging, short circuiting, reverse charging, multilation or

incineration of the cells must be avoided to prevent one or more of

the following occurrences; release of toxic materials, release of

hydrogen and/or oxygen gas, rise in surface temperature.

• If a cell has leaked or vented, it should be replaced immediately

while avoiding to touch it without any protection.

Service and Inspection Precautions

1. Obey precautionary markings and instructions

Labels and stamps on the cabinet, chassis, and components identify areas requiring special precautions. Be sure to observe these precautions, as well as all precautions listed in the operating manual and other associated documents.

2. Use designated parts only

The set’s components possess important safety characteristics, such as noncombustibility and the ability to tolerate large voltages. Be sure that replacement parts possess the same safety characteristics as the originals. Also remember that the 0 mark, which appears in circuit diagrams and parts lists, denotes components that have particularly important safety functions; be extra sure to use only the designated components.

3. Always follow the original design when mounting parts and routing wires

The original layout includes various safety features, such as inclusion of insulating materials (tubes and tape) and the mounting of parts above the printer board. In addition, internal wiring has been routed and clamped so as to keep it away from hot or high-voltage parts. When mounting parts or routing wires, therefore, be sure to duplicate the original layout.

4. Inspect after completing service

After servicing, inspect to make sure that all screws, components, and wiring have been returned to their original condition. Also check the area around the repair location to ensure that repair work has caused no damage, and confirm safety.

5. When replacing chip components...

Never reuse components. Also remember that the negative side of tantalum capacitors is easily damaged by heat.

6. When handling flexible print boards...

• The temperature of the soldering-iron tip should be about 270C.

• Do not apply the tip more than three times to the same pattern.

• Handle patterns with care; never apply force.

Caution: Remember that hard disk drives are easily damaged by vibration. Always handle with care.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

— 2 —

Confidential

PCG-VX89/VX89K/VX89P (AM)

Section Title Page

CHAPTER 1. BLOCK DIAGRAM ............................... 1-1

(to 1-2)

CHAPTER 2. FRAME HARNESS DIAGRAM ........ 2-1

(to 2-2)

CHAPTER 3. EXPLODED VIEWS AND

PARTS LIST............................................ 3-1

3-1. Main Section .................................................................... 3-2

3-2. LCD Section – Made by HI – .......................................... 3-5

(to 3-6)

History of the changes is shown as the

“Revision History” at the end of this data.

— 3 —

Confidential

PCG-VX89/VX89K/VX89P (AM)

CNX -176

RJ-45

VGA CN

CN15P

CHAPTER 1.

BLOCK DIAGRAM

14.1XGA

Intel Pentium

III

-m

90 0MHz

30p

DV 0

15 P

Intel 82815EM-T

CN 4 P

Intel

DA82562ET

GMCH2-m

Memory Bus PC=100

LCD &

Inverter

SONY

VCH

Intel /

FW82807A

256MB Tech

256MB DIMM

W-LAN

MiniPCI

Module

Type

III

IFX-209( Left)

Ant L

(Sub)

Ant R (Main)

IFX-208(Right)

CNX -173

MODEM

Conexant

Smart MC2

USB CN

CN4P

i .LINK

USB 1 . 1

W-LAN SW

USB 1 . 1

CN 17 P

i.Link

PCI Bus

Mini P CI

Connector

TypeIII

TSB43AB

CN 10 0 P

DC out

Ultra ATA66/100

HDD

CN 50 P

PCI

Clock Generator

IMI/C9835AT

CardBus/16bitCard

Card con troller RICOHR5C475II

MBX-56

Intel 82801BAM

FWH

SST

ICH2-m

LPC Bus

PC Card Connector

1 Slot

49LF004A

JogDial

CN 30P

AC Link

Audio Codec

(AC '97)

Amp

USB 1 . 1

Encoder

KBC/EC

HITACH

H8/2149

I/ O

Expander

O2MICRO

OZ99 8S

ATF

AD1030A

CN 2P

FAN

CN 2P

FLT-7

CN 2 P

RJ 1 1

CNX-174

USB C N

CN4P

USB 1 . 1

MIC CN

CN 30 P

HeadPhone

STmicr o

M29W200BB70N6

Memorystick

CN 14 P

USB 1 . 1

Memoryst ick

Controller

Slot

IFX -207

SP(L )

12 P

TouchPad

CN 7 P

JOG

CN 30 P CN24P

CN 30 P

Back

Botto n

CN 2P

SP(R )

SWX-101

CN 8P

Ke y B oard

Power SW

SWX-103

CN6P CN6P

Battery

11.1V/3600mAh

Confidential

1-21-1

(END)

PCG-VX89/VX89K/VX89P (AM)

+ 7 hidden pages

Sony PCG-VX89K, PCG-VX89P User Manual

TABLE OF CONTENTS