Change text in this variable definition to document title.
8
Welcome
Congratulations on your purchase of this Sony VAIO® computer, and
welcome to the VAIO User Guide.
This User Guide provides detailed information on all aspects of using
your new VAIO computer, from keyboard functions to preinstalled
software applications.
In the left navigation window, click the topics you want to learn more
about, and that information will be displayed in this main window.
9
Change text in this variable definition to document title.
10
Using Your VAIO Notebook
This section describes how to use your keyboard, touchpad, and optical
drive. You will also find information on how to connect your notebook to
another computer or network.
❑Using the Keyboard
❑Using the Touchpad
❑VAIO Action Setup
❑Center Jog Dial Control
❑Using the Removable Hard Disk Drive
❑Using the Optical Disc Drive
❑Using PC Cards
❑UsingaSecondBatteryPack
❑Using the Weight Saver
❑UsingMemoryStickMedia
❑Power Saving Modes
❑Connecting a Phone Line
❑Connecting with another VAIO computer
❑Connecting to a Local Area Network (LAN)
11
Change text in this variable definition to document title.
Using the Keyboard
Your notebook keyboard is very similar to that of a typewriter, but the keyboard
has additional keys that perform specific computer-related tasks.
Keyboard
Alt key
Function keys
Numeric keypad
Print Screen key
PgUp
PgDn
Applicationskeykeys
Navigation
Correctionkeys
Escape key
hift key
Ctrl key
Fn key
Windows key
KeyDescription
Numeric keypadContains the keys found on a typical calculator. Use the
numeric keypad area to type numbers or to perform
mathematical calculations such as addition and subtraction.
Note that you must press the Num Lock key to activate the
numeric keypad. (When you do so, the Num Lock light will
be on.)
Navigation keysSeveral keys are devoted to moving the cursor on the screen.
Correction keysThe Insert, Back Space, and Delete keys enable you to make
corrections in your documents.
12
Using the Keyboard
KeyDescription
Function keysThe twelve function keys along the top of the keyboard are
used to perform designated tasks. For example, in many
applications, F1 is the Help key. The task associated with
each function key may vary from one application to the next.
Escape keyThe Esc (Escape) key is used to cancel commands.
Print Screen keyThe Print Screen key takes an electronic snapshot of the
screen and places it in the Windows Clipboard. You can then
paste the screen shot into a document and print it.
Operator keys
(Shift, Ctrl, Alt
keys)
Several keys are always used with at least one other key: Ctrl,
Alt,andShift.Whenhelddownwithanotherkey,theCtrl
(Control) and Alt (Alternate) keys offer another way to give
commands. For example, in many applications, instead of
choosing the Save command from a menu, you can hold
down Ctrl and press S (referred to as Ctrl+S). The Shift key
operates the same way as on a typewriter; it is used to
produce capital letters or special symbols such as @ and $.
Windows keyThe key with the Windows logo displays the Windows Start
menu; it is the equivalent of clicking the Start button on the
taskbar. See “Combinations and functions with the Windows
key” for more information.
Fn keyThe Fn key is used in combination with other keys to issue
commands. See “Combinations and functions with the Fn
key” for more information.
Applications key The Applications key displays a shortcut menu of context-
sensitive choices. Pressing this key is the equivalent of
clicking the right mouse button.
13
Change text in this variable definition to document title.
Combinations and functions with the Windows key
CombinationFunction
+ F1Displays Windows Help.
+ TabSwitches the selected button on the taskbar.
+ DDisplays the desktop.
+ EDisplays Windows Explorer.
+ FDisplays the Windows Find: All Files window to find a file or
folder. This is the equivalent of selecting Find and then Files
or Folders from the Start menu.
+ Ctrl + FDisplays the Windows Find: Computer window where you
can locate other computers. This is the equivalent of selecting
Find and then Computer from the Start menu.
+ MMinimizes all displayed windows.
Shift ++ MReturns all minimized windows to their previous size.
+ RDisplays the Run window. This is the equivalent of selecting
Run from the Start menu.
Fn ++ InsertDisplays the Properties window. This is the equivalent of
double-clicking the System icon in the Control Panel.
14
Using the Keyboard
Indicators
IndicatorFunction
PowerLight is green when the power to the notebook is turned on,
flashes amber in Standby mode, and turns off when the
notebook is in Hibernate mode or powered off.
Battery 1Indicates the status of the battery inserted in the battery bay
1
Battery 2Indicates the status of the battery inserted in the multipurpose
2
Memory StickIndicates that the Memory Stick® slot is in use.
Hard diskThis indicator will light when data is being read from or
on the right side of the notebook.
drive bay on the left side of the notebook.
written to the hard disk. Do not enter Standby mode or turn
off the notebook when this indicator is on.
15
Change text in this variable definition to document title.
Indicator lights
LightOnOff
Num
Lock
Caps
Lock
Scroll
Lock
The number keys in the numeric
keypad are active.
The letters appear in uppercase as you
type. The Shift key lowers the case of
typed letters when Caps Lock is on.
The screen scrolls differently.
(Exactly how it scrolls depends on the
specific application. It has no effect in
many applications.)
The alphanumeric character keys
in the keypad area are active.
Letters appear in lower case as
you type (unless you hold down
the Shift key).
Information moves across the
display normally.
16
Combinations and functions with the Fn key
Combinations/
FeatureFunction
Using the Keyboard
Fn+(F3)
Mute On/Off
Fn+(F4)
Speaker volume
Fn+(F5)
Brightness control
LCD
Fn+/
(F7)
Switch to the
external
monitor/LCD
LCD
Fn+only/
(F8)
Control AV out
Toggles the built-in speaker off and on.
Adjusts the built-in speaker volume.
To increase volume, press Fn+F4, thenor.
To decrease volume, press Fn+F4, thenor.
Adjusts the brightness of the LCD.
To increase light intensity, press Fn+F5 and thenor.
To decrease light intensity, press Fn+F5 and thenor.
Toggles through the LCD, external display (connected to the
Monitor connector) and both LCD and external display.
Only LCD
LCD and external display
Only external display
Connect the cable before you turn on the notebook, otherwise
Fn + F7 will not work.
Toggles between LCD-only, external-only, and dual LCD/TV
display modes.
Only LCD
LCD and external display
Only external display
Fn+(F12)
Hibernate
Connect the cable before you turn on the notebook, otherwise
Fn + F8 will not work.
Provides for the lowest level of power consumption.
When you run this command, the state of the system and state
of the peripheral devices are written to the hard disk and the
system power is turned off. To return the system to its
original state, use the power button to turn on power.
17
Change text in this variable definition to document title.
Combinations/
FeatureFunction
Fn + Esc
Standby
Fn + EEjects CD.
Fn + FDisplay control. Minimizes and maximizes the LCD screen.
Puts the system into Standby mode, a power management
state. To return the system to the active state, press any key or
press the power button on your notebook.
If the default display resolution is reduced, this function
maximizes the display resolution to fit the screen size.
Maximizing the display screen enables you to view the
display at a greater resolution.
✍ Some functions are not available until Windows® launches.
18
Using the Touchpad
Using the Touchpad
The keyboard contains a cursor-pointing device called a touchpad. You can point
to, select, drag, and scroll objects on the screen using the built-in touchpad.
Touchpad
Pointer
Touchpad
Left and Right buttons
ActionDescription
PointSlide one finger on the touchpad to place the pointer on an
item or object.
ClickPress the left button once.
Double-clickPress the left button twice.
19
Change text in this variable definition to document title.
ActionDescription
Right-clickPress the right button once. In many applications, this action
displays a shortcut menu of context-sensitive choices.
DragSlide one finger while pressing the left button.
ScrollMove your finger along the right edge of the touchpad to
scroll vertically. Move your finger along the bottom to scroll
horizontally. (The scroll function is available only with
applications that support a touchpad scroll feature.)
✍ See Mouse Properties for information on touchpad features, such as clicking both
buttons simultaneously, adjusting touchpad speed, and Easy Launcher functions. To
access Mouse Properties, open the Start menu, point to Settings, Control Panel, and
then click the Mouse icon in the Control Panel.
20
VAIO Action Setup
VAIO Action Setup
VAIO Action Setup manages the settings for your notebook’s center Jog Dial™
control, Memory Stick® media, and i.LINK®
*
interface. An overview of some
of the functions controlled by VAIO Action Setup is provided in this section. For
more information on changing the settings using VAIO Action Setup, right-click
the Jog Dial Utility iconorin the taskbar and click Help Topics.
* i.LINK is a trademark of Sony used to designate that a product contains an IEEE 1394 con-
nection. The i.LINK connection may vary, depending on the software applications, operating
system, and compatible i.LINK devices. All products with an i.LINK connector may not
communicate with each other. Refer to the documentation that came with your compatible
i.LINK device for information on operating conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
21
Change text in this variable definition to document title.
Center Jog Dial Control
Your notebook is equipped with a center Jog Dial control located below the left
and right buttons. The center Jog Dial control enables you to open an application,
folder, or document from a predefined list by rotating and pressing the center Jog
Dial control. In addition, when you press the center Jog Dial control, you can turn
on your notebook automatically and start the selected application or document.
Center Jog Dial Control
Turn
Backbutton
Press
Center Jog Dial Control
The center Jog Dial control window always appears in the display. It is either in
the launcher mode or in the guide mode.
Using the center Jog Dial control
This section explains how to use the center Jog Dial control. For information on
how to change the settings of the center Jog Dial control, right-click the Jog Dial
Utility iconorin the task tray and click Help Topics.
22
Center Jog Dial Control
Launcher mode
The center Jog Dial control window is in launcher mode until a software
application is launched or the Jog Dial control window becomes active. When
you select an item in the Jog Dial control window and it is displayed between
orange bars, you can press the center Jog Dial control to view a submenu of that
item.
Using Launcher mode
To use the center Jog Dial control, click the Jog Dial control window or the Jog
Dial Utility icon in the taskbar. Alternatively, you can press the Ctrl key and the
center Jog Dial control while the Jog Dial control window is active to switch to
launcher mode.
Jog Dial Launcher
To select a desired item, proceed as follows:
23
Change text in this variable definition to document title.
1Rotate the center Jog Dial control to select the item you want, then press the
center Jog Dial control. The Jog Dial Launcher window switches to guide
mode and shows the function of the center Jog Dial control.
Jog Dial Guide
2Rotate or press the center Jog Dial control to use the desired function.
3To select another item, repeat steps 1 through 3 above.
Guide mode
The Jog Dial control window is in the guide mode when software is in use and
the software window is active. Depending on the software you are using, you can
select items from the displayed list using the center Jog Dial control. You can
switch between guide mode and launcher mode by pressing the Ctrl key and the
center Jog Dial control.
Using Guide mode
The Jog Dial control window displays the function of the center Jog Dial control.
Center Jog Dial back button
The center Jog Dial control includes a back button located to the right of the
control. Pressing this button brings you back to the previous screen.
24
Center Jog Dial Control
Using the center Jog Dial control with Sony software
If Sony software that supports the center Jog Dial control is active, you can use
the functions of the center Jog Dial control that are allocated to that software. For
more information on functions allocated to software, see the software
application’s Help.
Using the center Jog Dial control with other software
If the software you are using supports the center Jog Dial control, you can still
use the center Jog Dial control to scroll the window or adjust the window size.
Using a Dialog box
When a window such as Screen Properties is active, the Dialog box is displayed
in the Jog Dial window. You can select an item in the window by rotating the
center Jog Dial control. Pressing the center Jog Dial control is the equivalent of
pressing Enter or Select.
Jog Dial Guide Dialog Box
25
Change text in this variable definition to document title.
Using the Removable Hard Disk Drive
Your notebook is equipped with a removable, preformatted hard disk drive,
located on the right side next to the battery bay.
✍ Sony does not guarantee interoperability with removable hard disk drives other than
the one provided with your VAIO® notebook.
Notes on Removable Hard Disk Drive
Electrostatic discharge (ESD) can damage the hard disk drive and related
components. Sony cannot guarantee the hard disk drive against any damage
caused by its removal from the drive bay, or from any mishandling of the unit
resultinginphysicaldamage.Ifremovingtheharddiskdrive,takecarenotto
expose it to ESD or static electricity.
The hard drive is sensitive to shock and mishandling; therefore, it is important to
handle the hard disk drive by its edges, avoid applying pressure or squeezing the
top of the hard drive case, and avoid dropping it.
Before you remove the hard disk drive, close open programs, and shut down the
notebook; disconnect the computer and peripheral devices from electrical outlets;
and remove the battery.
Removing the hard disk drive
1Shut down your notebook and locate the latch for the hard disk drive.
2Loosen and remove the screw on the bottom of the notebook that secures the
hard disk drive. Use an appropriate screwdriver.
3Slide the hard disk drive out of the drive bay.
Installing the hard disk drive
1Slide the hard disk drive into the drive bay until it clicks into place.
2Replace and tighten the screw that secures the hard disk drive.
26
Using the Optical Disc Drive
Using the Optical Disc Drive
Your notebook comes with a removable optical disc drive located in the
multipurpose bay. Depending on the system you purchased, your optical disc
drive is either a CD-RW/DVD Combo Drive or a DVD-ROM drive.
The optical disc drive is removable when the power is on, but do not remove
the drive when your notebook is in a power saving mode. Any attempt to do
so may result in malfunction and/or data loss.
To insert a disc
1Turn on the notebook.
✍ When the notebook is in Standby or Hibernate mode, you cannot insert a disc. See
“Controlling Power Management” for more information on Standby and Hibernate
modes.
2Press the Eject button to open the optical drive.
The tray slides out.
Ejecting the tray
Eject button
✍ Avoid using adhesive labels to identify your discs. Adhesive labels may come off while
the disc is in use in your optical drive, and may cause damage to the unit.
27
Change text in this variable definition to document title.
3Place an optical disc on the tray with the label side facing up. For DVDs that
can played on both sides, the side of the disc facing up is the side that plays.
4Press the disc onto the hub until the disc clicks securely into place.
Inserting an optical disc
Label side facing up
5Close the tray by pushing it gently.
To eject a disc
When you finish using a disc, wait until the LED indicator turns off, and then
press the Eject button to remove the disc.
When the notebook is in a power saving mode, you cannot remove an optical
disc. See “Controlling Power Management” for more information about power
saving modes.
28
Using the Optical Disc Drive
If the optical disc does not slide out when you press the Eject button, turn off the
notebook and insert a thin, pointed object (such as a paper clip) into the manual
eject hole.
Make sure to seat the disc firmly over the hub fingers. If you do not seat the
disc firmly, you could damage your optical drive and you may not be able to
open the tray.
Manual eject hole
To play a DVD
To play a DVD, you may use the optical disc drive and the preinstalled
WinDVD® software. For more information on WinDVD, see the Help manual
that comes with your software.
✍ Before you use the optical disc drive to play a DVD, quit any open applications.
Systems equipped with a CD-RW/DVD Combo Drive can read DVD-R media,
but systems equipped with a DVD-ROM drive cannot read DVD-R media. When
you are ready to play a DVD, read the suggestions below to maximize your video
viewing experience.
29
Change text in this variable definition to document title.
❑When playing a DVD on battery power, set the power management profile to
DVD. You can also set the power management profile to Automatic Profile
Selection if the display is not clear when using other profiles.
✍ Automatic Profile Selection sets the power management profile to DVD whenever a
DVD is inserted. See “Controlling Power Management” for more information.
❑If you connect your notebook to a TV display, you may need to adjust the
display resolution. Read the suggestions below to set the display resolution
to the proper dimensions. Also see “Selecting the Display Mode” for more
information.
❑If the notebook is set to the default display setting, part of the video screen
will not appear. To view the entire screen, adjust the display resolution to
640 x 480.
Some discs recorded at 20 or 24 bits may produce noise while playing. If you
have audio devices connected, this may cause damage to your hearing and
the speakers. Reduce the volume before playing a DVD.
You cannot use the Fn + F8 function to switch between LCD and TV once a DVD
is inserted into the optical drive.
Do not switch between LCD and the external display while the DVD is playing.
This may cause a malfunction, and you may need to restart the DVD software.
Do not switch the power saving modes while you are playing the DVD.
Change the settings to disable the screen saver and the virus checker.
Do not use memory-resident utility software to speed up disc access. This
may cause the notebook to malfunction.
To play an audio CD
To play an audio CD, make sure the audio function is turned on. To do this,
complete the following procedure.
✍ The optical disc drive must be installed in the multipurpose bay before you begin.
30
Loading...
+ 187 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.