Sony PCG-GR300, PCG-GR300K, PCG-GR300P User Guide
Welcome
Congratulations on your purchase of this Sony VAIO® computer, and welcome to the VAIO User Guide.
This User Guide provides detailed information on all aspects of using your new VAIO computer, from keyboard functions to
preinstalled software applications.
In the left navigation window, click the topics you want to learn more about, and that information will be displayed in this
main window.
Note:
Click here to find the latest updates and supplemental information about your computer.
Page 1
Using Your VAIO Notebook
This section describes how to use your keyboard, touchpad, and optical drive. You will also find information on how to
connect your notebook to another computer or network.
Using the Keyboard
Using the Touchpad
VAIO Action Setup
Center Jog Dial Control
Using the Removable Hard Disk Drive
Using the Optical Disc Drive
Using PC Cards
Using a Second Battery Pack
Using the Weight Saver
Using Memory Stick Media
Power Saving Modes
Connecting a Phone Line
Connecting with another VAIO computer
Connecting to a Local Area Network (LAN)
Page 2
Using the Keyboard
Your notebook keyboard is very similar to that of a typewriter, but the keyboard has additional keys that perform specific
computer-related tasks.
Keyboard
Key Description
Numeric keypad Contains the keys found on a typical calculator. Use the numeric keypad area to type numbers or to
perform mathematical calculations such as addition and subtraction. Note that you must press the Num Lock key to activate
the numeric keypad. (When you do so, the Num Lock light will be on.)
Navigation keys Several keys are devoted to moving the cursor on the screen.
Correction keys The Insert, Back Space, and Delete keys enable you to make corrections in your documents.
Function keys The twelve function keys along the top of the keyboard are used to perform designated tasks. For example,
in many applications, F1 is the Help key. The task associated with each function key may vary from one application to the
next.
Escape key The Esc (Escape) key is used to cancel commands.
Print Screen key The Print Screen key takes an electronic snapshot of the screen and places it in the Windows
Clipboard. You can then paste the screen shot into a document and print it.
Operator keys
(Shift, Ctrl, Alt keys) Several keys are always used with at least one other key: Ctrl, Alt, and Shift. When held down with
another key, the Ctrl (Control) and Alt (Alternate) keys offer another way to give commands. For example, in many
applications, instead of choosing the Save command from a menu, you can hold down Ctrl and press S (referred to as
Ctrl+S). The Shift key operates the same way as on a typewriter; it is used to produce capital letters or special symbols
such as @ and $.
Windows key
The key with the Windows logo displays the Windows Start menu; it is the equivalent of clicking the Start
button on the taskbar. See Combinations and functions with the Windows key for more information.
Fn key The Fn key is used in combination with other keys to issue commands. See Combinations and functions with
the Fn key for more information.
Applications key
Page 3
The Applications key displays a shortcut menu of context-sensitive choices. Pressing this key is the
equivalent of clicking the right mouse button.
Page 4
Combinations and functions with the Windows key
Combination Function
+ F1 Displays Windows Help.
+ Tab Switches the selected button on the taskbar.
+ D Displays the desktop.
+ E Displays Windows Explorer.
+ F Displays the Windows Find: All Files window to find a file or folder. This is the equivalent of selecting Find
and then Files or Folders from the Start menu.
+ Ctrl + F Displays the Windows Find: Computer window where you can locate other computers. This is the equivalent
of selecting Find and then Computer from the Start menu.
+ M Minimizes all displayed windows.
Shift + + M Returns all minimized windows to their previous size.
+ R Displays the Run window. This is the equivalent of selecting Run from the Start menu.
Fn + + Insert Displays the Properties window. This is the equivalent of double-clicking the System icon in the
Control Panel.
Page 5
Indicators
Indicator Function
Power
Light is green when the power to the notebook is turned on, flashes amber in Standby mode, and turns off
when the notebook is in Hibernate mode or powered off.
Battery 1
Indicates the status of the battery inserted in the battery bay on the right side of the notebook.
Battery 2
Indicates the status of the battery inserted in the multipurpose drive bay on the left side of the notebook.
Memory Stick
Indicates that the Memory Stick® slot is in use.
Hard disk
This indicator will light when data is being read from or written to the hard disk. Do not enter Standby mode
or turn off the notebook when this indicator is on.
Page 6
Indicator lights
Light On Off
Num Lock The number keys in the numeric keypad are active. The
alphanumeric character keys in the keypad area are active.
Caps Lock The letters appear in uppercase as you type. The Shift key lowers
the case of typed letters when Caps Lock is on. Letters appear in lower case as you type (unless you hold down
the Shift key).
Scroll Lock The screen scrolls differently. (Exactly how it scrolls depends on
the specific application. It has no effect in many applications.) Information moves across the display normally.
Page 7
Combinations and functions with the Fn key
Combinations/
Feature Function
Fn+ (F3)
Mute On/Off Toggles the built-in speaker off and on.
Fn+ (F4)
Speaker volume Adjusts the built-in speaker volume.
To increase volume, press Fn+F4, then or .
To decrease volume, press Fn+F4, then or .
Fn+ (F5)
Brightness control Adjusts the brightness of the LCD.
To increase light intensity, press Fn+F5 and then or .
To decrease light intensity, press Fn+F5 and then or .
Fn+ / (F7)
Switch to the external monitor/LCD Toggles through the LCD, external display (connected to the Monitor connector)
and both LCD and external display.
Connect the cable before you turn on the notebook, otherwise Fn + F7 will not work.
Fn+ only/
(F8)
Control AV out Toggles between LCD-only, external-only, and dual LCD/TV display modes.
Connect the cable before you turn on the notebook, otherwise Fn + F8 will not work.
Fn+ (F12)
Hibernate Provides for the lowest level of power consumption. When you run this command, the state of the
system and state of the peripheral devices are written to the hard disk and the system power is turned off. To return the
system to its original state, use the power button to turn on power.
Fn + Esc
Standby Puts the system into Standby mode, a power management state. To return the system to the active
state, press any key or press the power button on your notebook.
Fn + E Ejects CD.
Fn + F Display control. Minimizes and maximizes the LCD screen. If the default display resolution is reduced, this
function maximizes the display resolution to fit the screen size. Maximizing the display screen enables you to view the
display at a greater resolution.
Note:
Page 8
Some functions are not available until Windows® launches.
Page 9
Using the Touchpad
The keyboard contains a cursor-pointing device called a touchpad. You can point to, select, drag, and scroll objects on the
screen using the built-in touchpad.
Touchpad
Action Description
Point Slide one finger on the touchpad to place the pointer on an item or object.
Click Press the left button once.
Double-click Press the left button twice.
Right-click Press the right button once. In many applications, this action displays a shortcut menu of context-sensitive
choices.
Drag Slide one finger while pressing the left button.
Scroll Move your finger along the right edge of the touchpad to scroll vertically. Move your finger along the bottom to
scroll horizontally. (The scroll function is available only with applications that support a touchpad scroll feature.)
Note:
See Mouse Properties for information on touchpad features, such as clicking both buttons simultaneously, adjusting
touchpad speed, and Easy Launcher functions. To access Mouse Properties, open the Start menu, point to Settings, Control
Panel, and then click the Mouse icon in the Control Panel.
Page 10
VAIO Action Setup
VAIO Action Setup manages the settings for your notebook's center Jog Dial control, Memory Stick® media, and i.LINK
®1
interface. An overview of some of the functions controlled by VAIO Action Setup is provided in this section. For more
information on changing the settings using VAIO Action Setup, right-click the Jog Dial Utility icon or in the taskbar and
click Help Topics.
1
i.LINK is a trademark of Sony us ed to des ignate that a produc t c ontains an I E EE 1 3 9 4 c onnection. T he i.LI NK connection may vary, depending on the
software applications, operating s ys tem, and c ompatible i.LI N K devices. A ll products with an i.LI N K c onnec tor may not c ommunic ate with eac h other. Refer
to the documentation that came with your compatible i.LIN K devic e for information on operating c onditions and proper c onnec tion. Before c onnec ting
compatible i.LI N K P C peripherals to your s ystem, s uc h as a C D-RW or hard dis k drive, c onfirm their operating s ys tem c ompatibility and required operating
conditions.
Page 11
Center Jog Dial Control
Your notebook is equipped with a center Jog Dial control located below the left and right buttons. The center Jog Dial
control enables you to open an application, folder, or document from a predefined list by rotating and pressing the center
Jog Dial control. In addition, when you press the center Jog Dial control, you can turn on your notebook automatically and
start the selected application or document.
Center Jog Dial Control
The center Jog Dial control window always appears in the display. It is either in the launcher mode or in the guide mode.
Page 12
Using the center Jog Dial control
This section explains how to use the center Jog Dial control. For information on how to change the settings of the center
Jog Dial control, right-click the Jog Dial Utility icon or in the task tray and click Help Topics.
Page 13
Launcher mode
The center Jog Dial control window is in launcher mode until a software application is launched or the Jog Dial control
window becomes active. When you select an item in the Jog Dial control window and it is displayed between orange bars,
you can press the center Jog Dial control to view a submenu of that item.
Using Launcher mode
To use the center Jog Dial control, click the Jog Dial control window or the Jog Dial Utility icon in the taskbar. Alternatively,
you can press the Ctrl key and the center Jog Dial control while the Jog Dial control window is active to switch to launcher
mode.
Jog Dial Launcher
To select a desired item, proceed as follows:
1.
Rotate the center Jog Dial control to select the item you want, then press the center Jog Dial control. The Jog Dial
Launcher window switches to guide mode and shows the function of the center Jog Dial control.
Jog Dial Guide
2.
Rotate or press the center Jog Dial control to use the desired function.
3.
To select another item, repeat steps 1 through 3 above.
Page 14
Guide mode
The Jog Dial control window is in the guide mode when software is in use and the software window is active. Depending on
the software you are using, you can select items from the displayed list using the center Jog Dial control. You can switch
between guide mode and launcher mode by pressing the Ctrl key and the center Jog Dial control.
Using Guide mode
The Jog Dial control window displays the function of the center Jog Dial control.
Page 15
Center Jog Dial back button
The center Jog Dial control includes a back button located to the right of the control. Pressing this button brings you back to
the previous screen.
Page 16
Using the center Jog Dial control with Sony software
If Sony software that supports the center Jog Dial control is active, you can use the functions of the center Jog Dial control
that are allocated to that software. For more information on functions allocated to software, see the software application's
Help.
Page 17
Using the center Jog Dial control with other software
If the software you are using supports the center Jog Dial control, you can still use the center Jog Dial control to scroll the
window or adjust the window size.
Using a Dialog box
When a window such as Screen Properties is active, the Dialog box is displayed in the Jog Dial window. You can select an
item in the window by rotating the center Jog Dial control. Pressing the center Jog Dial control is the equivalent of pressing
Enter or Select.
Jog Dial Guide Dialog Box
Page 18
Using the Removable Hard Disk Drive
Your notebook is equipped with a removable, preformatted hard disk drive, located on the right side next to the battery
bay.
Note:
Sony does not guarantee interoperability with removable hard disk drives other than the one provided with your VAIO
notebook.
®
Page 19
Notes on Removable Hard Disk Drive
Electrostatic discharge (ESD) can damage the hard disk drive and related components. Sony cannot guarantee the hard
disk drive against any damage caused by its removal from the drive bay, or from any mishandling of the unit resulting in
physical damage. If removing the hard disk drive, take care not to expose it to ESD or static electricity.
The hard drive is sensitive to shock and mishandling; therefore, it is important to handle the hard disk drive by its edges,
avoid applying pressure or squeezing the top of the hard drive case, and avoid dropping it.
Before you remove the hard disk drive, close open programs, and shut down the notebook; disconnect the computer and
peripheral devices from electrical outlets; and remove the battery.
Removing the hard disk drive
1.
Shut down your notebook and locate the latch for the hard disk drive.
2.
Loosen and remove the screw on the bottom of the notebook that secures the hard disk drive. Use an
appropriate screwdriver.
3.
Slide the hard disk drive out of the drive bay.
Installing the hard disk drive
1.
Slide the hard disk drive into the drive bay until it clicks into place.
2.
Replace and tighten the screw that secures the hard disk drive.
Page 20
Using the Optical Disc Drive
Your notebook comes with a removable optical disc drive located in the multipurpose bay. Depending on the system you
purchased, your optical disc drive is either a CD-RW/DVD Combo Drive or a DVD-ROM drive.
Caution:
The optical disc drive is removable when the power is on, but do not remove the drive when your notebook is in a
power saving mode. Any attempt to do so may result in malfunction and/or data loss.
Page 21
To insert a disc
1.
Turn on the notebook.
Note:
When the notebook is in Standby or Hibernate mode, you cannot insert a disc. See Controlling Power
Management for more information on Standby and Hibernate modes.
2.
Press the Eject button to open the optical drive.
The tray slides out.
Ejecting the tray
Note:
Avoid using adhesive labels to identify your discs. Adhesive labels may come off while the disc is in use in your
optical drive, and may cause damage to the unit.
3.
Place an optical disc on the tray with the label side facing up. For DVDs that can played on both sides, the side of
the disc facing up is the side that plays.
4.
Press the disc onto the hub until the disc clicks securely into place.
Inserting an optical disc
5.
Close the tray by pushing it gently.
Page 22
To eject a disc
When you finish using a disc, wait until the LED indicator turns off, and then press the Eject button to remove the disc.
When the notebook is in a power saving mode, you cannot remove an optical disc. See Controlling Power Management for
more information about power saving modes.
If the optical disc does not slide out when you press the Eject button, turn off the notebook and insert a thin, pointed
object (such as a paper clip) into the manual eject hole.
Caution:
Make sure to seat the disc firmly over the hub fingers. If you do not seat the disc firmly, you could damage your optical
drive and you may not be able to open the tray.
Manual eject hole
Page 23
To play a DVD
To play a DVD, you may use the optical disc drive and the preinstalled WinDVD® software. For more information on WinDVD,
see the Help manual that comes with your software.
Note:
Before you use the optical disc drive to play a DVD, quit any open applications.
Systems equipped with a CD-RW/DVD Combo Drive can read DVD-R media, but systems equipped with a DVD-ROM drive
cannot read DVD-R media. When you are ready to play a DVD, read the suggestions below to maximize your video viewing
experience.
When playing a DVD on battery power, set the power management profile to DVD. You can also set the power
management profile to Automatic Profile Selection if the display is not clear when using other profiles.
Note:
Automatic Profile Selection sets the power management profile to DVD whenever a DVD is inserted. See Controlling Power
Management for more information.
If you connect your notebook to a TV display, you may need to adjust the display resolution. Read the suggestions
below to set the display resolution to the proper dimensions. Also see Selecting the Display Mode for more
information.
If the notebook is set to the default display setting, part of the video screen will not appear. To view the entire
screen, adjust the display resolution to 640 x 480.
Caution:
Some discs recorded at 20 or 24 bits may produce noise while playing. If you have audio devices connected, this may
cause damage to your hearing and the speakers. Reduce the volume before playing a DVD.
You cannot use the Fn + F8 function to switch between LCD and TV once a DVD is inserted into the optical drive.
Do not switch between LCD and the external display while the DVD is playing. This may cause a malfunction, and you
may need to restart the DVD software.
Do not switch the power saving modes while you are playing the DVD.
Change the settings to disable the screen saver and the virus checker.
Do not use memory-resident utility software to speed up disc access. This may cause the notebook to malfunction.
Page 24
To play an audio CD
To play an audio CD, make sure the audio function is turned on. To do this, complete the following procedure.
Note:
The optical disc drive must be installed in the multipurpose bay before you begin.
1.
Click Start in the Windows taskbar, select Settings, and then click System. The System Properties window
appears.
2.
Select the Hardware tab and then click Device Manager in the Device Manager box. A window appears, listing
your notebook hardware devices.
3.
Double-click DVD/CD-ROM drives. From the drop-down list, double-click the drive name. A properties window
appears.
4.
Select the "Enable digital CD audio for this CD-ROM device" check box if it is not already selected and then click
OK.
Page 25
Notes on CD and DVD discs
Do not drop or bend the disc.
Do not touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause reading errors. Proper
care of the disc is essential to maintain its reliability. Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray, as they may cause damage to the disc.
For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the center out.
If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc
from the center out. Wipe off any remaining moisture with a dry, soft cloth.
Page 26
To write data to a CD-RW or CD-R disc1
You can use Easy CD Creator® software to write data to a CD-R or CD-RW disc. Easy CD Creator works only if the CD-R or
CD-RW disc is formatted; otherwise, your notebook will not recognize it. To create a CD-R disc that is readable in a CD-ROM
drive, make sure you finish the writing process before ejecting it. For more information, see the instructions included with
the Easy CD Creator software.
Note:
For optimal writing speed, deactivate the screen saver and exit anti-virus software before writing data to a disc.
For best results, use CD-Rs that are compatible with 8x speed, as Easy CD Creator® is preset to that speed. Your notebook
does not support 1x writing speed. If you use CD-RW or CD-R writing software other than Easy CD Creator, use
PowerPanel to select the DVD Profile. Memory-resident disc utilities may cause unstable operation or data loss. Deactivate
these utilities before writing data to a disc.
When using Easy CD Creator Standard, be sure to exit all other applications.
If your notebook computer has preinstalled Microsoft® Office applications, such as Excel, Word, and Outlook, turn off the
FindFast application.
Do not put your notebook into power saving mode while using Easy CD Creator.
Do not strike or shake the notebook while writing data to a disc.
Always use the AC adapter as the power source for your notebook if you are writing data to a CD-RW or CD-R disc.
Using battery power may result in data transfer failure.
1
For notebook models equipped with a C D-RW/DV D C ombo Drive.
Page 27
Using PC Cards
Your notebook includes two PC Card slots. PC Cards enable you to connect portable external devices such as another hard
disk drive or a PC Network Interface Card (NIC) to connect to a network.
Note:
The PC Card slots can accommodate two Type I/II PC Cards, or one Type III PC Card. These slots are compatible with
CardBus. Use the lower slot for Type III PC Cards. You do not need to shut down your notebook before inserting or
removing a PC Card.
Page 28
To insert a PC Card
1.
Insert the PC Card into the PC Card slot. Make sure the front label of the PC Card is facing up.
Inserting a PC Card
2.
Push the the PC Card slot gently into the connector. The PC Card is automatically detected by your system. The
Unplug or Eject Hardware icon appears in the taskbar.
Caution:
Do not force a PC Card into the slot as this may damage the connector pins.
Do not carry your notebook while touching the head of a PC Card (such as a wireless LAN card), as pressure or shock
may damage the connector pins.
Page 29
To remove a PC Card
The following procedure describes how to remove the PC Card while the notebook is on. If you want to remove the PC Card
while the notebook is off, skip to step number 6 (below).
1.
Double-click in the taskbar. The "Unplug or Eject Hardware" dialog box appears.
2.
Select the hardware device you wish to remove.
3.
Click Stop. In the "Stop a Hardware device" dialog box, confirm that the device can be safely removed from the
system.
4.
Click OK. The message, "PC Card can now be safely removed from the system" appears.
5.
Click OK again and then click Close.
6.
Push the Release button. The Release button pops out.
7.
Push the Release button a second time. The PC Card pops out. Gently grasp the card and pull it out of the slot.
Notes on using PC Cards
For some PC Cards, if you alternate between normal power operation and the Standby or Hibernate power
management modes while the card is inserted, you may find that a device connected to your system is not
recognized. Restart your system to correct the problem.
Some PC Cards may require that you disable idle devices when using the PC Card. You can use Sony Notebook
Setup to disable devices. See Displaying the Sony Notebook Setup Screen for more information.
Be sure to use the most recent software driver provided by the PC Card manufacturer.
If an exclamation mark (!) appears on the Device Manager tab in the System Properties dialog box, remove the
software driver and then reinstall it.
You may not be able to use some PC Cards or some functions of the PC Card with this notebook. If you have
difficulty inserting a card, check that you are orienting the card correctly. See the manual that came with your PC
Card for more information on its use.
Page 30
Loading...