The following FCC statement applies only to the version of this model manufactured
for sale in the USA.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the
•
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.•
The following FCC statement applies only to the version of this model manufactured
for sale in the USA.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
The following FCC statement applies only to the version of this model manufactured
for sale in the USA.
If you have any questions about this product:
Visit: www.sony.com/walkmansupport
Contact: Sony Customer Information Service Center at 1-(866)-456-7669
Write: Sony Customer Information Service Center 12451 Gateway Blvd., Fort Myers,
FL 33913
Declaration of Conformity
Trade Name:
SONY
Model No.:
NW-ZX2
Responsible Party:
Sony Electronics Inc.
Address:
16530 Via Esprillo, San Diego, CA 92127 U.S.A
Telephone Number:
858-942-2230
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The following FCC statement applies only to the version of this model manufactured
for sale in the USA.
This equipment must not be co-located or operated in conjunction with any other
antenna or transmitter.
The following FCC statement applies only to the version of this model manufactured
for sale in the USA.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip.
Several special packets are initiated by the MAC. These are the only ways the digital
baseband portion will turn on the RF transmitter, which it then turns off at the end of
the packet. Therefore, the transmitter will be on only while one of the aforementioned
packets is being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or operational
failure.
The following FCC statement applies only to the version of this model manufactured
for sale in the USA.
Frequency Tolerance: ±20 ppm
The following FCC/IC statement applies only to the version of this model
manufactured for sale in the USA and Canada.
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however, that
these low power wireless devices are absolutely safe. Low power Wireless devices
emit low levels of radio frequency energy (RF) in the microwave range while being
used. Whereas high levels of RF can produce health effects (by heating tissue),
exposure of low-level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low-level RF exposures have not found any
biological effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research. These
models have been tested and found to comply with FCC/IC radiation exposure limits
set forth for an uncontrolled environment and meet the FCC radio frequency (RF)
Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules.
Notice for customers: the following information is only applicable to
equipment sold in countries applying EU directives
Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan
For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany
Disposal of waste batteries and electrical and electronic equipment
(applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, the battery or on the packaging indicates that the
product and the battery shall not be treated as household waste. On certain batteries
this symbol might be used in combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than
0.0005% mercury or 0.004% lead. By ensuring these products and batteries are
disposed of correctly, you will help prevent potentially negative consequences for the
environment and human health which could otherwise be caused by inappropriate
waste handling. The recycling of the materials will help to conserve natural
resources.
In case of products that for safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this battery should be replaced
by qualified service staff only. To ensure that the battery and the electrical and
electronic equipment will be treated properly, hand over these products at end-of-life
to the applicable collection point for the recycling of electrical and electronic
equipment. For all other batteries, please view the section on how to remove the
battery from the product safely. Hand the battery over to the applicable collection
point for the recycling of waste batteries. For more detailed information about
recycling of this product or battery, please contact your local Civic Office, your
household waste disposal service or the shop where you purchased the product or
battery.
For users in Canada
Listening for a Lifetime
Selecting fine audio equipment such as the unit you’ve just purchased is only the
start of your musical enjoyment. Now it’s time to consider how you can maximize the
fun and excitement your equipment offers. This manufacturer, the Consumer
Electronics Association (CEA)® and the American Speech-Language-Hearing
Association (ASHA) want you to get the most out of your equipment by playing it at a
safe level; a level that lets the sound come through clearly without annoying blaring
or distortion and, most importantly, without damaging your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
TO ESTABLISH A SAFE LEVEL:
Set your volume control to the lowest level where you can hear the music
•
comfortably and clearly. Prolonged exposure to anything over 85 decibels can
cause gradual hearing loss.
Once you have established a sound level where you can hear the audio
•
comfortably, clearly and without distortion, set the dial and leave it there.
•
See if your music player has a volume limiter that allows you to set a safe listening
level by establishing a maximum volume level on your player. This is a great
solution for parents to ensure their children listen at a safe level.
Limit listening time to give your hearing “quiet breaks.”•
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.