Sony MSW-2000, MSW-A2000, MSW-M2000P, MSW-M2000, MSW-A2000P User Manual

DIGITAL VIDEOCASSETTE RECORDER

MSW-A2000 MSW-A2000P MSW-M2000 MSW-M2000P

MSW-2000

DIGITAL VIDEOCASSETTE PLAYER

MSW-M2100 MSW-M2100P

Note

The supplied CD-ROM includes Operation Manuals for the MSW series of videocassette recorders and players (English, Japanese, French, and German versions). For more details,

see page 4, “Using the CD-ROM Manual.”

Remarque

Le CD-ROM fourni comprend les modes d’emploi des enregistreurs et des lecteurs de vidéocassettes de la série MSW (versions anglaise, japonaise, française et allemande). Pour de plus amples détails, voyez page 12, “Utilisation du

mode d’emploi sur le CD-ROM”.

Hinweis

Die mitgelieferte CD-ROM enthält Bedienungsanleitungen für die MSW-Modellreihe von Videorecordern und -spielern (englische, japanische, französische und deutsche Version). Näheres hierzu finden Sie auf Seite 20 unter „Gebrauch der CD-ROM-Bedienungsanleitung“.

OPERATION GUIDE 1st Edition (Revised 2)

[English/French/German]

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

WARNING: THIS WARNING IS APPLICABLE FOR USA

ONLY.

If used in USA, use the UL LISTED power cord specified below. DO NOT USE ANY OTHER POWER CORD. Plug Cap Parallel blade with ground pin

(NEMA 5-15P Configuration)

Cord Type SJT, three 16 or 18 AWG

wires Length Less than 2.5 m (8 ft 3 in) Rating Minimum 10 A, 125 V

This apparatus must be earthed.

For the customers in the USA

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

Using this unit at a voltage other than 120V may require the use of a different line cord or attachment plug, or both. To reduce the risk of fire or electric shock, refer servicing to qualified service personnel.

For the customers in Europe

This product with the CE marking complies with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European standards:

• EN60950: Product Safety

• EN55103-1: Electromagnetic Interference (Emission)

• EN55103-2: Electromagnetic Susceptibility (Immunity)

This product is intended for use in the following Electromagnetic Environment (s): E1 (Residential), E2 (Commercial and light industrial), E3 (Urban outdoors) and E4 (Controlled EMC environment ex. TV studio)

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

English

Using the CD-ROM Manual.....................................................................4

Specifications..............................................................................................5

Using the CD-ROM Manual

The supplied CD-ROM includes Operation Manuals for the MSW series of videocassette recorders and players (English, Japanese, French, and German versions).

CD-ROM System Requirements

The following are required to access the supplied CDROM disc.

•Computer: PC with MMX Pentium 166 MHz or faster CPU, or Macintosh computer with PowerPC CPU.

- Installed memory: 32 MB or more

- CD-ROM drive: × 8 or faster

•Monitor: Monitor supporting resolution of 800 × 600 or higher

When these requirements are not met, access to the CD-ROM disc may be slow, or not possible at all.

Preparations

The following software must be installed on your computer in order to use the operation manuals contained in the CD-ROM disc.

•Microsoft Internet Explorer Version 4.0 or higher, or Netscape Navigator Version 4.0 or higher

•Adobe Acrobat Reader Version 4.0 or higher

Notes

•If Microsoft Internet Explorer is not installed, it may be downloaded from the following URL: http://www.microsoft.com/ie

•If Netscape Navigator is not installed, it may be downloaded from the following URL: http://home.netscape.com/

•If Adobe Acrobat Reader is not installed, it may be downloaded from the following URL: http://www.adobe.com/products/acrobat/ readstep.html

To Read the CD-ROM Manual

To read the operation manual contained in the CDROM disc, do the following.

1 Insert the CD-ROM disc in your CD-ROM drive.

A cover page appears automatically in your browser. If it does not appear automatically in the browser, double click the index.htm file on the CD-ROM disc.

2 Select and click the operation manual that you

want to read.

A PDF file of the operation manual opens.

Note

If you lose the CD-ROM disc or become unable to read its content, for example because of a hardware failure, you can do one of the following.

•You can purchase a new CD-ROM disc to replace one that has been lost or damaged. Contact a Sony service representative.

•You can purchase printed versions of the operation manuals. Contact a Sony service representative. When ordering, be sure to specify the part number of the manual you want.

Part No. Models covered

3-203-783-0X MSW-A2000/A2000P/M2000/M2000P/

2000

3-205-303-0X MSW-M2100/M2100P

.........................................................................................................................................................................................................

• MMX and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

• PowerPC is a registered trademark of International Business Machines Corporation.

•Macintosh is a registered trademark of Apple Computer, Inc.

•Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries.

• Netscape Navigator is a registered trademark of Netscape Communications Corporation in the U.S. and other countries.

• Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Specifications

General

Recording format (MSW-A2000/A2000P/2000/

M2000/M2000P)

MPEG IMX

Power requirements

100 to 240 VAC, 50/60 Hz

Power consumption

2 A (200 W) (MSW-A2000/

A2000P)

2.1 A (210 W) (MSW-M2000/ M2000P)

1.8 A (180 W) (MSW-2000)

1.9 A (190 W) (MSW-M2100/ M2100P)

Peak inrush current

(1) Power ON, current probe method:

54 A (240 V), 20 A (100 V)

(2) Hot switching inrush current, measured in

accordance with European standard EN55103-1: 16 A (230 V)

Operating temperature

5°C to 40°C (41°F to 104°F)

Storage temperature

–20°C to +60°C (–4°F to +140°F) Humidity 20 to 90% Mass MSW-A2000/A2000P: 23 kg (50 lb

11 oz)

MSW-M2000/M2000P: 23.5 kg

(51 lb 12 oz) MSW-2000: 22 kg (48 lb 8 oz) MSW-M2100/M2100P: 23 kg

(50 lb 11 oz)

Dimensions (w/h/d)

427 × 194 × 544 mm

/8 × 7 3/4 × 21 1/2 inches)

(16

Tape transport system

Tape speed Digital Betacam (MSW-M2000/

M2000P/M2100/M2100P):

96.7 mm/s

MPEG IMX:

64.5 mm/s (525/60)

53.8 mm/s (625/50) Betacam SX: 59.6 mm/s Analog Betacam (MSW-A2000/ A2000P/M2000/M2000P/M2100/ M2100P):

118.6 mm/s (525/60)

101.5 mm/s (625/50)

Digital Betacam playback time (MSW-M2000/

M2000P) 124 minutes with BCT-D124L

MPEG IMX record/playback time

184 minutes with BCT-184MXL

(525/60)

220 minutes with BCT-184MXL

(625/50)

Betacam SX playback time

194 minutes with BCT-194SXLA

Analog Betacam playback time (MSW-A2000/

A2000P/M2000/M2000P/M2100/M2100P)

90 minutes with BCT-90MLA

(525/60)

108 minutes with BCT-90MLA

(625/50)

Fast forward/rewind time

Approx. 3 minutes with BCT-

184MXL

Search speed

Shuttle mode Digital Betacam playback (MSW-

M2000/M2000P/M2100/ M2100P): Still to approx. ±50 times normal playback speed

MPEG IMX playback: Still to

approx. ±78 times normal playback speed

Betacam SX playback: Still to

approx. ±78 times normal playback speed

Analog Betacam playback (MSW-

A2000/A2000P/M2000/M2000P/ M2100/M2100P): Still to ±35 times normal playback speed (525/60) Still to ±42 times normal playback speed (625/50)

Variable speed mode

Digital Betacam playback (MSW-

M2000/M2000P/M2100/ M2100P): –1 to +3 times normal playback speed

MPEG IMX playback: –1 to +3

times normS‚ playback speed

Betacam SX playback: –1 to +2

times normal playback speed

Analog Betacam playback (MSW-

A2000/A2000P/M2000/M2000P/ M2100/M2100P): –1 to +3 times normal playback speed

Jog mode Still to ±1 times normal playback

speed

Specifications

Servo lock time 0.5 (525/60)/0.7 (625/50) second or

less (from standby on) Load/unload time 6 seconds or less Recommended tapes

MPEG IMX cassettes (S, L):

BCT-6MX/12MX/22MX/32MX/

60MX

BCT-64MXL/94MXL/124MXL/

184MXL

Digital Betacam cassettes (S, L)

(for playback only) (MSW-

M2000/M2000P/M2100/

M2100P)

Betacam SX cassettes (S, L) (for

playback only)

Betacam SP cassettes (S, L) (for

playback only) (MSW-A2000/

A2000P/M2000/M2000P)

Betacam cassettes (S, L) (for

playback only) (MSW-A2000/

A2000P/M2000/M2000P)

K factor (2T pulse)

1% or less

LF non-linearity 3.0% or less

Analog composite input (MSW-A2000/A2000P/ M2000/M2000P/2000) to analog composite output

Bandwidth (Y) 0 to 5.75 MHz

+0.5 dB/ –2.0 dB S/N ratio 53 dB or more Differential gain 2% or less Differential phase 2° or less Y/C delay 20 ns or less K factor (2T pulse)

1% or less

Output SCH phase

Based upon RS-170A/CCIR

R.624-3

(Adjustable by using the menu)

Digital audio system

Digital video system

Digital video signal system

Sampling frequency

Y: 13.5 MHz

R–Y/B–Y: 6.75 MHz Quantization 8 bits/sample Compression MPEG2 4:2:2P@ML Channel coding S-I-NRZI PR-IV Error correction Reed-Solomon code

Analog component output

Bandwidth

Y0 to 5.75 MHz +0.5 dB/–2.0 dB

R–Y/ B–Y 0 to 2.75 MHz +0.5 dB/–2.0 dB S/N ratio 56 dB or more K factor (2T pulse)

1% or less

Analog component input (MSW-A2000/ A2000P/M2000/M2000P/2000) to analog component output

Input A/D quantization

10 bits/ sample

Bandwidth

Y0 to 5.75 MHz +0.5 dB/–2.0 dB

R–Y/ B–Y 0 to 2.75 MHz +0.5 dB/–2.0 dB S/N ratio 52 dB or more

Digital audio (CH1 to CH8) signal format

Sampling frequency

48 kHz (synchronized with video) Quantization 16 bits/sample or 24 bits/sample Wow and flutter Below measurable level Headroom 20 dB (or 18 dB, selectable) Emphasis T1= 50 µs, T2=15 µs (MSW-

A2000/A2000P/M2000/M2000P: on/off selectable in recording mode; MSW-M2100/M2100P: on/off selectable using function menu)

Analog output

A/D, D/A quantization

24 bits/sample Frequency response

20 Hz to 20 kHz +0.5 dB/ –1.0 dB

(0 dB at 1 kHz)

Dynamic range 90 dB or more (at 1 kHz, emphasis

on, 16 bits/48 kHz)

95 dB or more (at 1 kHz, emphasis

on, 24 bits/48 kHz)

Distortion 0.05% or less (at 1 kHz, emphasis

on, reference level (+4 dBm))

Crosstalk –80 dB or less (at 1 kHz, between

any two channels)

Digital Betacam playback (MSW-M2000/M2000P/M2100/M2100P)

Video

Bandwidth

S/N ratio 62 dB or more K factor 1 % or less

Y MSW-M2000/M2100: 0 to 5.75 MHz +0.5 dB/–0.5 dB

MSW-M2000P/M2100P: 0 to 2.75 MHz +0.5 dB/–0.5 dB

R–Y/B–Y

0 to 2.75 MHz +0.5 dB/-0.5dB

Digital Audio (CH1 to CH4)

Frequency response (0 dB at 1 kHz) Dynamic range 95 dB (at 1 kHz, emphasis on) Distortion (T.H.D at 1 kHz reference level) 0.05 % rms (emphasis on) Wow and flutter Below measurable level

20 Hz to 20 kHz +0.5 dB/–1.0 dB

Analog Audio (cue track)

Frequency response (0 dB at 1 kHz)

S/N ratio (at 3 % distortion level) 45 dB (at 1 kHz) Distortion (T.H.D at 1 kHz reference level) Wow and flutter MSW-M2000/M2100: Less than 0.2 % rms

100 Hz to 12 kHz + 3 dB/–3 dB

2 % or less

MSW-M2000P/M2100P: Less than 0.2 % (DIN 45507 weighted)

Betacam SX playback

Video

Bandwidth

S/N ratio

K factor (2T pulse)

R–Y/B–Y

525-line mode: 0 to 4.5 MHz +0.5 dB/–3.0 dB 625-line mode: 0 to 5.5 MHz +0.5 dB/–3.0 dB 0 to 2.0 MHz +0.5 dB/–3.0 dB 56 dB or more 1 % or less

Audio

Frequency response Dynamic range

Distortion

20 Hz to 20 kHz +0.5 dB/–1.0 dB (0 dB at 1 kHz) 90 dB or more (at 1kHz, emphasis on)

0.05 % or less (at 1 kHz, emphasis on, reference level (+4 dBm))

Analog Betacam playback (MSW-A2000/M2000/M2100)

Video

Metal tape Oxide tape

Bandwidth Y 30 Hz to 4.5 MHz +0.5 dB/ –4.0 dB 30 Hz to 4.1 MHz +0.5 dB/ –6.0 dB

R–Y/ B–Y 30 Hz to 1.5 MHz +0.5 dB/–3.0dB 30 Hz to 1.5 MHz +0.5 dB/–3.0 dB

S/N ratio Y

LF non-linearity

Y/C delay

51 dB or more

R–Y/ B–Y 48 dB or more 45 dB or more

2% or less Y R–Y/ B–Y

3% or less

4% or less

20 ns or less

48 dB or more

3% or lessK factor (2T pulse)

Specifications

Audio

Metal tape Oxide tape

Frequency response (at 10 dB

LNG

below reference levela)) S/N ratio (at 3% distortion level) 72 dB or more 50 dB or more (Dolby NR off) Distortion (THD at 1 kHz reference

)

level Wow and flutter 0.1% rms or less

AFM Frequency response (at reference

level

)

S/N ratio (at 3% distortion level)

Distortion (THD at 1 kHz reference

)

level

a) Reference level: +4 dBm

Analog Betacam playback (MSW-A2000P/M2000P/M2100P)

Video

50 Hz to 15 kHz +1.5 dB/ –3.0 dB 50 Hz to 15 kHz +3.0 dB

1% or less

2% or less

20 Hz to 20 kHz +0.5 dB/–2.0 dB

85 dB or more

0.5% or less

Metal tape Oxide tape

Bandwidth Y 25 Hz to 5.5 MHz +0.5 dB/–4.0 dB 25 Hz to 4.0 MHz +0.5 dB/–6.0 dB

R–Y/ B–Y 25 Hz to 2.0 MHz +0.5 dB/–3.0 dB

25 Hz to 1.5 MHz +0.5 dB/–3.0 dB

S/N ratio Y 48 dB or more 46 dB or more

R–Y/ B–Y 48 dB or more 45 dB or more

K factor (2T pulse) 2% or less 3% or less LF non-linearity Y 3% or less

R–Y/ B–Y

4% or less

Y/C delay 20 ns or less

Audio

Metal tape Oxide tape

Frequency response (at 20 dB

LNG

below peak level

S/N ratio (at 3% distortion level)

)

50 Hz to 15 kHz +1.5 dB/–3.0 dB

68 dB or more 62 dB or more

(CCIR 468-3 weighted) Distortion (THD at 1 kHz

1% or less 2% or less

reference levelb)) Wow and flutter 0.1% rms or less

AFM Frequency response (at reference

level

)

20 Hz to 20 kHz + 0.5 dB/–2.0 dB

S/N ratio (at 3 % distortion level) More than 72 dB (CCIR 468-3 weighted) Distortion (THD at 1 kHz reference

level

)

Less than 0.5 %

a) Peak level: +8 dB above reference level b) Reference level: +4 dBm

50 Hz to 15 kHz ±3.0 dB

Processor adjustment range

Video level ±3 dB/ –∞ to +3 dB selectable Chroma level ±3 dB/ –∞ to +3 dB selectable Setup level (MSW-A2000/2000)

±30 IRE

Black level (MSW-A2000P/M2000P)

±210 mV

Y/C delay ±100 ns (in analog Betacam

playback) Chroma phase ±30° System phase Sync: ±15 µs

SC: ±200 ns

Input connectors

SDI INPUT (MSW-A2000/A2000P/M2000/M2000P/

2000) BNC (1 with active through out) Serial digital (270 Mbits/s) SMPTE 259M/ITU-R BT.656

SDTI-CP INPUT (MSW-A2000/A2000P/M2000/

M2000P) BNC (1)

SMPTE 326M

REF. VIDEO INPUT

BNC (2 in loop through

connection)

Black burst or composite sync

0.3 Vp-p, 75 Ω, sync negative

COMPONENT VIDEO INPUT (MSW-A2000/

A2000P/M2000/M2000P/2000)

BNC (3 for 1 set) Y: 1.0 Vp-p, Sync negative R–Y/B–Y: 0.7 Vp-p, 75 Ω, with

100% color bar for MSWA2000P/M2000P and with 100% or 75% color bar selectable for MSW-A2000/M2000

COMPOSITE VIDEO INPUT (MSW-A2000/A2000P/

M2000/M2000P/2000)

BNC (2 in loop through

connection)

1.0 Vp-p, 75 Ω, Sync negative

AUDIO INPUT CH1/2/3/4 (MSW-A2000/A2000P/

M2000/M2000P/2000)

XLR 3-pin, female (4) LOW OFF: –60 dBu, high

impedance, balanced

HIGH OFF: +4 dBu, high

impedance, balanced

HIGH ON: +4 dBm, 600 Ω

termination, balanced

AUDIO INPUT(AES/EBU) CH1/2, 3/4, 5/6, 7/8

(MSW-A2000/A2000P/M2000/M2000P/2000)

BNC (4) Complies with AES-3id-1995

TIME CODE IN (MSW-A2000/A2000P/M2000/

M2000P) XLR 3-pin, female (1)

0.5 to 18 Vp-p, 10 kΩ, balanced

Output connectors

SDI OUTPUT BNC (3 including 1 for character

superimposition) Serial digital (270 Mbits/ s) SMPTE 259 M/ITU-R BT.656

SDTI-CP OUTPUT

BNC (2) SMPTE 326M

COMPONENT VIDEO OUTPUT

BNC (3 for 1 set) Y: 1.0 Vp-p, Sync negative R–Y/B–Y: 0.7 Vp-p, 75 Ω, with

100% color bar for MSW-

A2000P/M2000P/M2100P and

with 100% or 75% color bar

selectable for MSW-A2000/

M2000/M2100

COMPOSITE VIDEO OUTPUT

BNC (3 including 1 for character

superimposition)

1.0 Vp-p, 75 Ω, Sync negative

AUDIO OUTPUT CH1/2/3/4

XLR 3-pin, male (4) +4 dBm at 600 Ω load, low

impedance, balanced

AUDIO OUTPUT (AES/EBU) CH1/2, 3/4, 5/6, 7/8

BNC (4) Complies with AES-3id-1995

MONITOR OUTPUT (L/R)

XLR 3-pin, male (2) +4 dBm at 600 Ω load, low

impedance, balanced

TIME CODE OUT

XLR 3-pin, male (1)

2.2 Vp-p, low impedance, balanced

PHONES JM-60 stereo phone jack

–∞ to –12 dBu at 8 Ω load,

unbalanced

CUE OUT XLR 3-pin, mail

+4 dBm at 600 Ω load, low impedance, balanced (MSWM2000/M2000P/M2100P only)

+ 19 hidden pages

Sony MSW-2000, MSW-A2000, MSW-M2000P, MSW-M2000, MSW-A2000P User Manual

Table of Contents

Using the CD-ROM Manual

Specifications