Sony KV-AR25M88 Users guide [xz]

4-088-210-E1 (3)
Trinitron Color TV
Operating Instructions
Before operating the unit, please read this manual thoroughly and retain it for future reference.
KV-AR34 KV-AR29 KV-AR25
© 2002 Sony Corporation
M88
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 220 V AC.
• Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water.
For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms.
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Do not block the ventilation openings of the TV. Do not install the TV in a confined space, such as a bookcase or built-in cabinet.
For children’s safety, do not leave children alone with the TV. Do not allow children to climb onto it.
Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only.
Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not attach anything (e.g., adhesive tape, cellophane tape, glue) on the painted cabinet of the TV. Do not scratch the picture tube.
Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel.
Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations.
Do not place any objects on the TV.
Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV.
Product Overview
• FD Trinitron CRT
• Digital Texture Enhancer
• 16:9 Wide Mode
• DVD signal terminal
Do not plug in too many appliances to the same power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days.
Accessory
Quantity
Remote Commander (RM-993) 1
Batteries (size 5) 2 Stabilizing band 1 Stabilizing clamp 2 Screw (Dia.3.8 × 20) 3
x Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.
20 mm
3.8 mm
screws clamps band
1
(3)
2
Note
• Use only the supplied screws. Use of other screws may damage the TV.
(1) Screw the band and one clamp to the
provided hole at the rear of your TV.
(2) Screw the band to the TV stand.
(1)
(2)
(3) Put a cord or chain through both
clamps and screw the other clamp to a wall or pillar.
(1) Attach each end of a cord or chain to
the provided holders at the rear of your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment which can support the TV set weight.
Table of Contents
Installation
Getting Started ..................................... 6
Setting up your TV
(“INITIAL SETUP”) ............................. 7
Overview of Controls
TV front and rear panels ..................... 8
Remote control ..................................... 9
Advanced Operations
Selecting the picture and sound
modes .................................................. 11
Viewing the picture with DTE ......... 12
Viewing the picture in wide mode.. 12
Listening with surround sound ....... 13
Setting the timers ............................... 14
Menu Adjustment
Introducing the menu system .......... 15
Changing the “PICTURE” setting ... 18
Changing the “SOUND” setting ..... 20
Changing the “SETUP” setting ........ 22
Changing the Channel Preset
(“CH PRESET”) setting ..................... 24
Additional Information
Connecting optional components ... 27
Troubleshooting ................................. 29
Specifications ...................... Back cover
GB
Installation
x Getting Started
1
Step 1
b
b
INITIAL SET
UP
ENG ILSH
Insert the batteries (supplied) into the remote.
Note
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components (see page 27).
Step 3
Plug in the power cord, then press ! on the TV to turn it on.
Step 4
Set up the TV by following the instructions of the “INITIAL SETUP”menu (see page 7).
6 Installation
x
Setting up your TV
(“INITIAL SETUP”)
When you turn on your TV for the first time, the “INITIAL SETUP” menu will appear. This menu allows you to change the menu language, adjust the picture position and preset the TV channels automatically.
Press V or v to select the desired menu
1
language (e.g.,”ENGLISH”), then press ENTER.
The selected menu language appears.
If the “PIC ROTATION” bar is slanted,
2
press V or v to adjust it, then press ENTER.
If no adjustment is necessary, then press ENTER.
The while adjusting.
or icon on the screen flashes
Rotate anti-
clockwise
MENU
V/v/B/b/
ENTER
INITIAL SET
PIC ROTATION
Refer to this bar when adjusting.
SOUND
PIP PROGR
ENTER
DTE
PIP PROGR
PIC
MODE
INITIAL SET
UP
MENU
UP
ENG ILSH
Rotate
clockwise
Installation
Press V or v to select “YES”, then press
3
ENTER to preset the channels automatically (see page 24).
The screen will indicate automatic presetting is in progress.
To skip automatic channel presetting, select “NO”, then press ENTER.
Press V or v to select “NO”, then press
4
ENTER. The “INITIAL SETUP” menu will not appear again the next time you turn on the TV by pressing !.
To allow this menu to appear again, select
INITIAL SET
AUTO PROGRAM
START NOW?
Y
NO
INITIAL SET
PR : 09
:
YS
TV AUTOS
LOWV
HF
INITIAL SET DIS PAL NEX T TIME?
S
Y T ENUM
HI
Y
NO
“YES”, then press ENTER.
Tips
• You can immediately go to the end of the ”INITIAL SETUP” menu by pressing MENU.
• You can also set up your TV using the menu system (see page 15).
Installation
UP
ES
UP
UP
ES
Overview of Controls
x TV front and rear panels
TV rear panel
qa
RLY
123
CR
C
B
qs
4
ENTER SELECT
AUTO PROGR
PROGRMENU
L(MONO) R
2
qd
1
qf
TV front panel
0
Button/Terminal Function Page
1 ! Turn off or turn on the TV. 6 2 1 Standby indicator. 2 Wake Up indicator. 14 3 Remote control sensor. 4 PROGR +/– Select program number. 5 2 +/– Adjust volume. 6 t Select TV or video input. 7 AUTO PROGR Preset channels automatically.
Menu operations
5 SELECT V/v Select and adjust items. 17 6 ENTER Confirm selected items. 17
8 MENU Display or cancel the menu. 17 9 t3 Video input terminal 3. 27 0 i Headphone jack. qa Component video input terminal. 28 qs 8 Antenna input terminal. 27 qd T Monitor output terminal. 27 qf t1, t2, t3 Video input terminal 1, 2, 3. 27
9
L(MONO) R
3
8
7
AUTO
PROGR
ENTER
56
SELECT
4
PROGRMENU
3
8 Overview of Controls
x Remote control
qf qg
qh qj
qk ql w;
wa ws
wd wf
DTE
PIC
MODE
RESET
DVD
SOUND
SOUND MODE
231
564
897
0
PIP PROGR
ENTER
PIP PROGR
SURROUND
TV
PROGR
JUMP
MENU
WIDE MODE
Button Function Page
1
1 ?/1 Turn off temporarily or
3 a Display the TV input.
2
4 0 – 9, - Input numbers.
3
5 JUMP Jump to previous program
9 SURROUND Select surround mode. 13
4
0 WIDE MODE Select wide-mode (16:9). 12 qa PROGR +/– Select program number.
5
qf qg % Mute the sound.
6 7
qh DVD qj t
8
wa DTE ws SOUND MODE Select sound mode. 11
9
wd PIC MODE Select picture mode. 11
0
wf 2 +/– Adjust volume.
Timer operations
qa
qs Set TV to turn off 14
qd Set TV to turn on 14
qs
PIP operations (yellow label)
qd
6 7 8 PIP PROGR +/
PIP PROGR – Not function for your TV.
qk ql SOUND w; ENTER
Stereo/bilingual operations
2 A/B Not function for your TV.
turn on the TV.
number.
Display on-screen information.
Select component video input.
Select TV or video input. Select DTE mode.
automatically.
automatically.
Overview of Controls
28
27 12
continue
Overview of Controls
continued
es
ed ef
eg
eh
ej
DTE
PIC
MODE
RESET
DVD
SOUND
SOUND
MODE
231
564
897
0
PIP PROGR
ENTER
PIP PROGR
SURROUND
TV
PROGR
JUMP
MENU
WIDE MODE
Button Function Page
Menu operations
wg
wj MENU
Display or cancel the menu.
wk ENTER Confirm selected items. 17 eh V, v, B , b Select and adjust items. 17
Teletext operations (green label)
wh
wg wh 0 – 9
wl PROGR +/– e;
wj
wk
ea es ed
Not function for your TV.
ef eg (red, green,
yellow, blue)
ej RESET Set TV to factory setting. 29
wl
e; ea
17
10 Overview of Controls
Loading...
+ 22 hidden pages