Sony KV-29FS60U, KV-32FS60D, KV-29FS60E, KV-29FS60A, KV-29FS60D User Manual

...
SERVICE MANUAL AE-5
www.ELEKO.de
Hier finden Sie das Service-Manual für die Modelle KV-29FS60A bis KV-29FS60U und KV-32FS60A bis KV-32FS60E.
CHASSIS
MODEL
KV-29FS60A KV-29FS60B KV-29FS60D KV-29FS60E KV-29FS60K KV-29FS60R KV-29FS60U
COMMANDER DEST CHASSIS NO.
RM-891 Italian SCC-Q12E-A
RM-891 French SCC-Q13E-A
RM-891 AEP SCC-Q11E-A
RM-891 Spanish SCC-Q14E-A
RM-891 OIRT SCC-Q16G-A
RM-891 OIRT SCC-Q16H-A
RM-891 UK SCC-Q15D-A
MODEL
COMMANDER DEST CHASSIS NO.
KV-32FS60A KV-32FS60B KV-32FS60D KV-32FS60E
RM-891 Italian SCC-Q12F-A
RM-891 French SCC-Q13F-A
RM-891 AEP SCC-Q11F-A
RM-891 Spanish SCC-Q14F-A
TRINITRON
MICROFILM
COLOR TV
®
®
ITEM MODEL Television System Stereo System Channel Coverage Color System
www.ELEKO.de
Italian
French
AEP
Spanish
OIRT
UK
B/G/H,D/K GERMAN Stereo
B/G/H, D/K,L,I GERMAN/NICAM
B/G/H, D/K GERMAN Stereo
B/G/H, D/K GERMAN/NICAM
B/G/H, D/K
I NICAM Stereo UHF : B21-B69
Stereo
Stereo
KV-29FS60K GERMAN/NICAM Stereo
KV-29FS60R GERMAN Stereo
ITALIA VHF : A-H2 (C) UHF : 21-69 PAL B/G/H VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 CABLE TV (2) : S01-S05,M1-M10,U1-U10 DK VHF : R01-R12 UHF : R21-R69
L VHF : F02-F10 UHF : F21-F60 CABLE : B-Q B/G/H VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 CABLE TV (2) : S01-S05, M1-M10, U1-U10 ITALIA VHF : A-H2 (C) UHF : 21-69 I UHF : B21-B69
PAL B/G/H/ VHF : E2-E12 : E21-E69 CABLE TV (1) : S1-S41 CABLE TV (2) : S01-S05, M1-M10, U1-U10 ITALIA VHF : A-H2 (C) UHF : 21-69 D/K VHF : R01-R12 UHF : R21-R69
PAL B/G/H/ VHF : E2-E12 : E21-E69 CABLE TV (1) : S1-S41 CABLE TV (2) : S01-S05, M1-M10, U1-U10 ITALIA VHF : A-H2 (C) UHF : 21-69
B/G/H/ VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 D/K VHF : R01-R12 UHF : R21 R 9
PAL, SECAM NTSC4.43, NTSC3 58 (VIDEO IN)
PAL, SECAM NTSC4.43, NTSC3 58 (VIDEO IN)
PAL, SECAM NTSC4.43, NTSC3 58 (VIDEO IN)
PAL, SECAM NTSC4.43, NTSC3 58 (VIDEO IN)
PAL, SECAM NTSC4.43, NTSC3 58 (VIDEO IN)
PAL NTSC4.43, NTSC3 58 (VIDEO IN)
MODEL 29FS60A 29FS60B 29FS60D 29FS60E 29FS60K 29FS60R 29FS60U 32FS60A 32FS60B 32FS60D 32FS60E
Power
Consumption
[PICTURE TUBE] KV-29FS60
KV-32FS60
149Wh 148Wh 148Wh 148Wh 148W 1 8W 148Wh 144Wh 149Wh 149Wh 149Wh
[FRONT]
FD Trinitron Approx. 72 cm (29 inches) (Approx. 68 cm picture measured diagonally) 102 degree deflection
FD Trinitron Approx. 82 m (32 inches) (Approx. 76 cm pi ture measured diagon lly) 102 degr e deflection
Video output - phono jack
3
Audio inputs - phono jacks
3
S Video input - 4 pin DIN
3
Headphone jack : stereo minijack
Sound output 2x25W (Music Power) Power requirements 220 - 240V
Dimensions KV-29FS60 Approx 738 x 588 x 507 mm (w/h/d) KV-32FS60 Approx 867 x 564 x 558 mm (w/h/d)
Input/Output Terminals
[REAR]
21-pin Euro connector (CENELEC standard).
1
- Inputs for Audio and Video signals.
- Inputs for RGB.
- Outputs of TV Video and Audio signals. 21-pin Euro connector
S
2
- Inputs for Audio and Video signals.
- Inputs for S video.
- Outputs forVideo and Audio signals (selectable).
S
21-pin Euro connector
3
- Inputs for Audio and Video signals.
- Inputs for S video.
External speaker terminals : 2-pin DIN (5)
Weight KV-29FS60 Approx 55kg KV-32FS60 Approx 68kg
Supplied accessories RM-891 Remote Commander (1)
IEC designated R6 battery (2)
Other features NICAM*, FASTEXT, TOPTEXT
* (KV-29FS60B/29FS60E/29FS60K/
29FS60U/32FS60B/32FS60E only)
2
[RM-891]
www.ELEKO.de
Remote control system Infrared control Power requirements 3V dc
2 batteries IEC designation
R6 (size AA) Dimensions Approx 210x56x24mm (w/h/d) Weight Approx 110g (Not including battery)
Design and specifications are subject to change without notice.
Model Name
Item Pal Comb PIP RGB Priority Woofer Box Scart 1 Scart 2 Front in (3) Scart 4 Projector AKB in 16:9 mode Norm B/G Norm I Norm D/K Norm AUS Norm L
KV-29FS60A
KV-32FS60A
ON ON ON ON ON ON ON
OFFOFFOFFOFFOFFOFFOFF
ON ON ON ON ON ON ON
OFFOFFOFFOFFOFFOFFOFF
ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
OFFOFFOFFOFFOFFOFFOFF
ON ON ON ON ON ON ON ON ON ON ON ON ON OFF
OFF ON OFF OFF OFF OFF ON
ON ON ON ON ON ON OFF OFFOFFOFFOFFOFFOFFOFF OFF ON OFF OFF OFF OFF OFF
KV-29FS60B
KV-32FS60B
KV-29FS60D
KV-32FS60D
KV-29FS60E
KV-29FS60K KV-29FS60R KV-29FS60U
KV-32FS60E
Norm SAT Norm M Teletext Nicam Stereo Language Preset
WARNING
The flexible mains lead is supplied connected to a having a fuse of use a
5 AMP FUSE
ASA
mark.
T
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUITABLE FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE OUTLET SOCKET. When an alternative type of plug is used it should be fitted with a
, otherwise the circuit should be protected by a
FUSE
distribution board.
(KV-29FS60U only)
5 AMP
approved by
OFFOF OFFOFFOFFOFFOFF OFFOFFOFFOFFOFFOFFOFF
ON ON ON ON ON ON ON OFF ON OFF ON ON OFF ON
Italia French German Spanish OIRT OIRT English
capacity. Should the fuse need to be replaced,
ASTA
to
B.S. 1363
BS 1362
fused plug
, ie one that carries the
5 AMP
5 AMP FUSE
at the
How to replace the fuse. Open the fuse compartment with a screwdriver blade and replace the fuse.
FUSE
3
21 pin connector
www.ELEKO.de
21 19 17 15 13 11
9 7 5 3 1
223
Pin No 1 2 4 Signal Signal level
1
S
3
GS I
RD D D
L/G/S/I
R/D/D/D
G
S
S
20 18 16
2
3 4 5 6
7
8
9 10 11
12 13 14
14
15
12
_ (S signal Chroma
6
10
8
17
6
18
19
Audio output B (right)
Audio output B (right)
Audio output A (left)
Ground (audio) Ground (blue) Audio input A
(left) Blue input 0.7 +/- 3dB, 75 ohms positive
Function select (AV control)
Ground (green) Open G een Green signal : 0.7 +/- 3dB, 75 ohms,
Open G d (red) Ground (blanking)
_ _ Red input 0.7 +/- 3dB, 75 ohms, positive
input) Blanking input
(Ys signal) Ground (video
output) Ground (video
input) Video output 1V +/- 3dB, 75ohms, positive sync 0.3V
4 2
20
21
_ _ Video input 1V +/- 3dB, 75ohms, positive sync 0.3V
_ Video input
Y (S signal) Common ground
(plug, shield)
Standard level : 0.5V rms Output impedence : Less than 1kohm*
Standard level : 0.5V rms Output impedence : More than 10kohm*
Standard level : 0.5V rms Output impedence : Less than 1kohm*
Standard level : 0.5V rms Output impedence : More than 10kohm*
High s ate (9.5 2V) : Part mode L w sta (0-2V) : TV mode Inpu impedence : More than 10K ohms Input c pacitance : Less than 2nF
positive
0 3 +/- 3dB, 75 ohms, positive
High state (1-3V) Low state (0-0.4V) Input impedence : 75 ohms
(-3+10dB)
(-3+10dB) 1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
Connected Not Connected (open) * at 20Hz - 20kHz
Pin No.
1 2 3 4
Signal Ground Ground Y (S signal) input C (S signal) input
1V 3dB 75 ohm, positive Sync. 0.3V -3 + 10dB
0.3V 3dB 75 ohm, positive Sync.
Signal Level
S
3
L/G/S/I R/D/D/D
3
3
4
AE-5 SELF DIAGNOSTIC SOFTWARE
www.ELEKO.de
The identification of errors within the AE-5 chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the event of one of these situations arising the software will first try to release the bus if b usy (F ailure to do so will report with continuous flashing LED) and then communicate with each device in turn to establish if a device is f aulty. If a device is found to be faulty the relevant device number will be dis­played through the LED (Series of flashes which must be counted) See table 1., non fatal errors are reported using this method.
Diagnostic Item
Description
Power does not turn on Does not light Power cord is not plugged in
+B Overcurrent (OCP) 2 times H.OUT (Q6803/6804) is shorted. (D Board)
Vertical Deflection stopped 4 times +15V is not supplied R6835 ope (D Board)
No of times Standby
LED Flashes
Fuse is burned out
Linearity FET (Q6806) is shorted. (D Board) IC6604 Power IC is shorted. (D Board)
-15V is not supplied R6834 open (D B ard) IC6700 is shorted (D Board)
ERROR
No error 00 Not allowed (may be confused with Srcs response
flash!) Over Current Prote ti n 02 Over Voltage Protectio 03 Vertical Protec ion 04 AKB 05 H - Protectio 06 Speak r Protection 07 Ge eral IIC Line 0 error 08 MEGATEXT 09 NVM 10 Main colour decoder 11 Feature Box 12 D/A converter 13 Backend 14 Multi sound processor 15 Auto Wide 16 External RAM 17
Probable cause
Location
ERROR COUNT
LED
01
Detected Symptoms
Power does not come on No p wer is supplied to the TV AC power supply is faulty
Pow r do s not come on
Lo d on power line has shorted Vertical deflection pulse has stopped
Power line has shorted
Flash Timing Example : e.g. error number 3
StBy LED
ON ON ON
OFF OFF
5
ERROR DETECTION MONITOR
www.ELEKO.de
Device acknowledge is used to check IIC errors. Device acknowledge is checked by sending an IIC start sequence during CRT power on. Each device is checked three times, if there is no acknowledge after every attempt, it will be regarded as an error. There are three steps to check errors
1. IIC line 0 If all devices except the NVM have errors, IIC line 0 error is displayed
2. Board check If all devices mounted on one board have errors, board error is displayed
3. Each device check If IIC line error and board error are not detected then the device with an error is displayed
The detected errors can be displayed as follows:
1. Error Monitor Menu
2. Error Reader
1. ERROR MONITOR MENU
The error monitor menu is displayed by selecting TT33. The following menu will be displayed:
ERROR MONITOR
Operating Time :
930360h 15h
Saved Err rs :
1. 100h = A-Board
2. 401h = BP-B CXD2069 MID
3. 704h = J-B TDA9320 Main Col Dec
4. 000h = no error occured
5. 000h = no error occured
Actual Error :
New error code sequence is starting
Ignore Errors : [off]
6
2. ERROR READER DISPLAY
www.ELEKO.de
The error reader display is connected to the service connector to read actual error codes. The part number for the error reader display is S-188-900-10. Once an error has been detected it will then be displayed on the two digit error reader. The errors displayed refer to the following table :
Send Data to Error Reader
Error Code Data high Data Low Error type Function
00 00h - f0h no device
Gen.IIC Error
00 01h f0h 01h IIC 0 line 00 02h f0h 02h IIC 1 line not used
Board Error
01 00h f1h 00h A Board 02 00h f2h 00h B1 Board 03 00h f3h 00h B2 Board 04 00h f4h 00h BP Boa d 05 00h f5h 00h D1 Boa d 06 00h f6h 00h E oard 07 00h f7h 00h J Boar
Device Error
A Board
01 01h f1h 01h CXA1875 Port Expander 01 02h f1h 02h TU1326 Main Tuner 01 03h f1h 03h TU1350 Sub Tuner
B1 Board
02 01h f2h 01h P83C654 Feature Box 02 02h f2h 02h SDA9280 D/A Converter
B2 Board
03 01h f3h 01h SAA4977 Basic 03 02h f3h 02h SAA4950 Memory
BP Board
04 01h f4h 01h CXD2069 MID
D1 B ard
05 01h f5h 01h CXA8070 Dynamic Conv. 05 02h f5h 02h CXA1875 Port Expander
E Board
06 01h f6h 01h CXD2100 Backend
J Board
07 01h f7h 01h CXD2057 Auto Wide 07 02h f7h 02h SDA9288 PIP 07 03h f7h 03h TDA9320 Sub Colour 07 04h f7h 04h TDA9320 Main Colour 07 05h f7h 05h CXA1875 Sub Sound 07 06h f7h 06h TDA7309 HP Amp 07 07h f7h 07h TEA6422DT Audio SW 07 08h f7h 08h MSP3410D Sound Proc 07 09h f7h 09h TC9337F Sound DSP
7
TABLE OF CONTENTS
www.ELEKO.de
Section Title Page Section Title Page
Warning and Caution .....................3
Self-Diagnostic Function .....................5
1. GENERAL
Overview .....................9
Installation .....................10
Advanced Operations .....................11
Teletext .....................16
2. DISASSEMBLY
2-1. Rear Cover Removal .....................17
2-2. Chassis Assy Removal .....................17
2-3. Service Position .....................17
2-4. U Board Removal .....................17
2-5. J Board Removal .....................18
2-6. J Shield Removal .....................18
2-7. B1 Board Removal .....................18
2-8. Picture Tube Removal .....................19
Removal and Replacement of the
Main-Bracket bottom plates .....................20
3. SET-UP ADJUSTMENTS
3-1. Beam Landing .....................21
3-2. Convergence .....................22
3-3. Focus .....................24
3-4. Screen [G2] White Balance .....................24
4. CIRCUIT ADJUSTMENTS
4-1. Electrical Adjustments .....................26
4-2. Volume Electrical Adjustments .................. 32
4-3. Test Mode 2 .............. ...33
5. DIAGRAMS
5-1. Block Diagram (1) .....................35
Block Diagram (2) .....................40
Block Diagram (3) .....................45
Block Diagram (4) .....................50
5-2. Circuit Board Location .....................55
5-3. Schematic Diagrams and
Printed Wiring Boards .....................55
* C Board .....................57
* J Board .....................65
* U Board .....................74
* A Board .....................81
* BP Board .....................85
* VM Board .....................92
* B1 Board .....................95
* D1 Board .....................99
* F Board .....................103
* F1 Board .....................106
* M Board .....................107
* E Board .....................111
* D B ard .....................116
* H1 Board .....................122
5-4. Semi onductors .....................125
5-5. IC Blocks .....................128
6. EXPLODED VIEWS
6-1 Chassis .....................129
6 2. Picture Tube . ....................131
7 ELECTRICAL PARTS LIST
.....................133
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR THE CARBON PAINTED ON THE CRT, AFTER REMOVAL OF THE ANODE CAP
WARNING !!
AN ISOLATING TRANSFORMER SHOULD BE USED DURING ANY SERVICE WORK TO AVOID POSSIBLE SHOCK HAZARD DUE TO LIVE CHASSIS. THE CHASSIS OF THIS RECEIVER IS DIRECTLY CONNECTED TO THE POWER LINE.
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY SHADING AND MARKED ON THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION
APRES AVOIR DECONNECTE LE CAP DE’LANODE, COURT-CIRCUITER L’ANODE DU TUBE CATHODIQUE ET CELUI DE L’ANODE DU CAP AU CHASSIS METALLIQUE DE L’APPAREIL, OU AU COUCHE DE CARBONE PEINTE SUR LE TUBE CATHODIQUE OU AU BLINDAGE DU TUBE CATHODIQUE.
ATTENTION !!
AFIN D’EVITER TOUT RISQUE D’ELECTROCUTION PROVENANT D’UN CHÁSSIS SOUS TENTION, UN TRANSFORMATEUR D’ISOLEMENT DOIT ETRE UTILISÈ LORS DE TOUT DÈPANNAGE. LE CHÁSSIS DE CE RÈCEPTEUR EST DIRECTMENT RACCORDÈ Á L’ALIMENTATION SECTEUR.
ATTENTION A UX COMPOSANTS RELATIFS Á LA
SÈCURITÈ !!
LES COMPOSANTS IDENTIFIÈS PAR UNE TRAME ET PAR UNE MARQUE SUR LES SCHÈMAS DE PRINCIPE, LES VUES
EXPLOSÈES ET LES LISTES DE PIECES SONT D’UNE IMPORTANCE CRITIQUE POUR LA SÈCURITÈ DU FONCTIONNEMENT, NE LES REMPLACER QUE PAR DES COMPSANTS SONY DONT LE NUMÈRO DE PIÈCE EST INDIQUÈ DANS LE PRÈSENT MANUEL OU DANS DES SUPPLÈMENTS PUBLIÈS PAR SONY.
8
SECTION 1
www.ELEKO.de
GENERAL
The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain
as in the manua
l.
Overview
This section briefly describes the buttons and controls on the TV set and the Remote Control. Open the flaps at the front and back of his Instruction Manual for detailed illustrations. For more information refer to the page numbers given in the overview.
Remote Control
Symbol Description See page
I/
u TV: standby mode on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1 TV
+
2
3
R Teletext: Freezing a subpage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Å/a
4
5 > PIP: Selecting the source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6
´/´
7 1, 2, … 9, 0 Number buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
8
9
0
9
Joystick for menu selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
!™ MENU Switching on and off of Menu system . . . . . . . . . . . . . . . . . . . . . . . . . . 31
PROGR +/– TV: Channel selection up- and downwards . . . . . . . . . . . . . . . . . . . . . 32
¸ +/– Volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
!∞
-/--
!•
f
;
@™
¤
VIDEO
I/
u VCR: Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Buttons under cover
˚
@∞ CH +/– VCR operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
VTR 1 2 3 4 MDP Video equipment selector 0 z ) p P r Buttons for VCR operation
?
TV: on-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Teletext: index page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Selecting of input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
PIP: Swapping the screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
PIP: Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Back to the channel last selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Selecting of screen format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
No function on this set
Press OK to confirm
Teletext: Page selection up-and downwards . . . . . . . . . . . . . . . . . . . . . 42
Picture mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Equaliser mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Selection of double digit channel numbers . . . . . . . . . . . . . . . . . . . . . 32
Freezing of TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
No function on this set
Teletext: Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
TV: Selecting of TV mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Teletext: Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Muting of sound on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Displaying of the time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Resetting of picture setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
TV-set – front and top
Symbol Description See page
2
A
B q 3 S-video input jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
C 3,
D u Indica r for ndby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
E U P wer sw h . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
F S ecting inpu ource . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
G ¸ +/– Volu c rol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
H PROGR – Channel selection up- and downwards . . . . . . . . . . . . . . . . . . . . . . 37
I CON ROL Control panel: Switching on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3 Ph no vide /aud inp ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
F G H I
+–+
S
A B C
Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
ROGR
CON RO
ED
M NLKJ
/G/SI
S
RD/D D
OP
TV-set – rear
Symbol Description See page
1 21-pin Euro connector (Scart) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Y
1/
J
K
Y
2/j2 21-pin Euro connector (Scart) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
L
Y
3/j3 21-pin Euro connector (Scart) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
M
˘
N R/D/D/D, L/G/S/I, External speaker terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
|, |
S, | C (Centre, Surround)
O L/G/S/I
P
R/D/D/D
R/D/D/D
L/G/S/I Audio phono jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
|
Aerial socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Left and right speaker terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
28
33
10
www.ELEKO.de
Installation
B Connecting the TV Set
1 Connect the TV set to the mains socket (220-240 V. AC, 50 Hz). 2a Connect a conventional aerial cable to the socket marked ˘ M on the rear of the TV set
or
2b Connect your Satellite Receiver to one of the Scart connectors J K L of the TV set.
When connecting a VCR to your TV set:
We recommend that you use the preset function Manual Programme Preset (page 38) to tune in the VCR signal to programme position 0.
S
C Inserting the Batteries into the Remote Control
Make sure to insert the batteries using the correct polarities. Dispose of exhausted batteries according to your local regulations.
VIDEO
SAT
Step 2 Basic Presetting
A The Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:
Press MENU !™ to switch the menu on and off.
Use , , 4, $ of the joystick to select within the menu system.
Press OK to store.
When menu is switched off:
Press to return to the last menu scre n.
B Se ecting Language and Country
1 Press th ENU !™ utton.
The menu Language/Country appears on the screen.
2 h the joystick to . Push the joystick to $ to select the language.
Press OK . The menus appear in the selected language.
3 P h the joystick to $ to select Country. Push the joystick to . 4 Select the country in which you will operate the TV set using $ or 4.
Select Off if you wish an automatic tuning without ACI (fast presetting with a given channel sequence). Confirm by pressing OK .
The menu Auto Tuning appears.
anguageCount y
anguage
Count y
Select En e
Language/Country
Language
Country
Select: Enter:
Language/Country
Language
Country
Select Country:
Engish
O
Engl sh
Off
Czech Rep.
Con irm: OK
Eng ish
Austria
Begium
Bugaria Denmark
Finland
Off
D Switching on the TV Set
Press the switch U E at the front of the TV set.
If the standby mode indicator u D on the TV is lit, press TV I/u 1 on the Remote Control to switch on the TV set.
ED
First Time Operation
35
C Automatic Tuning In of Channels
Push the joystick to for more than 2 sec..
After all available channels are stored, the TV goes back to the programme position with which you started the automatic tuning. Your TV is now ready for use.
To stop the automatic tuning: Press OK !¡.
If you wish to change the sequence of the stored channels, go to Sorting Programme Positions in Advanced Presetting.
If you need to change or repeat the tuning afterwards (e.g. when you move house) : select the menu Auto Tuning in the Set Up
menu.
1 2 3
5
Searching
CO2 CO3 CO CO7 CO8
Set Up
Auto Tuning
Programme Sorting AV Preset Instal ation
Start Au o Tuning:
Select:
First Time Operation
Start
31
11
www.ELEKO.de
Step 3 Basic TV operation
This section explains the most important functions for the daily use of your TV set. When using the control panel on the top of the TV set, first press CONTROL I, then F, G or H.
Function Operation
Switching on/off
Switching off temporarily (Standby mode) TV is now in standby mode. Indicator u D lights
Switch on from standby mode button 7.
Selecting channels
Using the Channel overview Push to $ or 4 to select a channel, push to z to
Going to the channel last selected
Adjusting the volume
Muting the sound
Selecting Equaliser mode (See also page 39) following modes: Personal, Vocal, Jazz,
Selecting Picture mode (see also page 38) of the following modes: Personal, Movie or Live.
Freezing the picture
Changing the screen format (imitation of wide screen format).
Resetting picture/sound settings to factory levels Press ? .
Displaying on-screen indications
Displaying the time (only when teletext is Press ˚ to switch time on or off. broadcast)
Using Teletext (see also page 42) Select a page using the number buttons 7
Viewing the input signal of a connected device source. (see also page 44) Press ; to return to the TV picture.
32
First Time Operation
Press U E on the TV set.
To save energy, we recommend to switch off the TV completely when set is not in use.
Press TV I/
u 1.
up. After 15 min. without any TV signal and no pressing of a button, the TV automatically goes into standby mode.
Press TV I/
u 1
, PROGR +/– H or any number
Press PROGR +/- H or the number buttons 7. For a double the two number buttons.
digit number first press -/-- !¶, then
Press OK .
confirm.
Press 8.
Press ¸ + or – G.
Press ¤ @™ to switch sound off or on.
Press repeatedly to select one of the
Rock, Pop or Flat Press repeatedly !∞ to select one
Press !• if you wish to make a note of an
information, e.g., a telephone number. Press again to return to the normal TV screen.
Press 9 repeatedly to select 4:3 or 16:9
Open the cover of the Remote Control.
+
2 to switch indications on or off.
Press
Open the cover of the Remote Control
Press f to switch on. Press ; s itch off.
E.g. for page 125 press 1,2 and 5. Select the index page by pressing
Press 3 repeatedly to select the desired input
+
2.
10
12 13 1
8 9
11
VIVA RTL SAT 1 S3 VIVA 2 PRO 7 ARD
+–+
Soul Music News Game Show Animal Report Stones in Interviev Pink Panther Afternoon Report
Advanced Operation
Advanced Presetting
Sorting of Programme Positions
After having used Automatic Tuning chan els y u may wish to rearrange the order of the channels.
1 Press MENU. Select the symb
sing $ h to .
2 Select Programme Sorting u ng $. Pus to to enter. 3 Select the programme positio of the channel you wish to sort using 4 or $.
Push to to ter.
4 Move t e channel t e new programme position using 4 or $. Store by
K
pressi g OK. The c nnel is now at e new position. The other programme positions move a ordingly.
5 To sort oth mme positions repeat steps 3 to 4. 6 Press MENU to return to the normal TV screen.
M nual Tuning In of Channels
Use this function to preset channels or a video input source one by one to programme positions of your choice.
1 Press MENU. Select the symbol 2 Select Installation using $. Push to to enter.
Select Manual Programme Preset using $. Push to to enter.
3 Select the programme position by pushing to 4 or $. Push twice to .
The column SYS is highlighted.
4 Select the TV system using 4 or $. Push to to enter.
Available TV systems are B/G for western European countries, D/K for eastern European countries, EXT for a video input source (please go to step 5c after selecting EXT) The column CH is highlighted.
5 Select your method for the channel tuning using 4 or $. Push to to enter.
You have the choice between C for a terrestrial channel, S for a cable channel, F for direct frequency input.
a Direct Channel Input - S, C or F
For channel numbers input a two digit number, for the channel frequency a three digit number.
Select the two or three digits by using the number buttons 0 to 9.
To start the search and to store the channel, press OK.
To preset other channels repeat steps 3 to 5a.
b Channel search (SEARCH)
Use Search if you do not know the channel number or frequency Start the search for the next available channel by pushing to $.
Store the channel by pressing OK or continue the search by pushing again to $.
To search for other channels repeat steps 3 to 5b.
c For video input sources (EXT)
Select the Video Input source using 4 or $.
Store your selection by pressing OK.
To allocate other sources repeat steps 3 to 5c.
6 Press MENU to return to the normal TV screen.
using $. Push to .
Set Up
Auto Tuning
Programme Sor ing
AV Preset Installation
Select: Enter:
Programme Sorting
PROG CH LABEL
5
C03
PRO 7
C05
2
EU- P
C07
3
SWF
C08
4
R L
C09
5
SA
C
6
MDR
C 2
7
DDI
C 3
8
DSF
C 4
9
R L 2
C 5
0
KAB
C 6
Se ect Prog.: Confirm:
Programme Sorting
PROG CH LABEL
5
C03
C03 5
2
PRO 7
C05
3
EU- P
C07
4
SWF
C08
5
R L
C09
6
SA
C
7
MDR
C 2
8
DDI
C 3
9
DSF
C 4
0
R L 2
C 5
KAB
C 6
Se ect Pos tion: Move: OK
Insta lation
Language/Country
Manual Programme Preset
Further Programme Preset RGB Set Up Picture Rotation Personal ID
Se ect: Enter:
Manual Programme Preset
PROGCHSYSSKIP LABEL
Se ect: Enter:
PROGOfSKIP
1
PROG SYSOfSKIP LABEL
1 B/G
PROG SYSOfSKIP LABEL
1 B G
ROGCHS SOSKI ABE
0 EX
1
B/G
2
B/GOfOf
3
Of
4
Of
5
Of
6
Of
7
Of
8
Of
9
Of
10
Of
11
Of
SYS LABEL
B/G
D/K
EXT
First Time Operation
C09 C10
CH
C
S F
CH
AV
AV2 AV3
- - - - - - -
CH
03
SEARCH
O
ARD BBC
AV
33
12
www.ELEKO.de
Advanced Presetting
Captioning a Station Name
During presetting the channels are usually labelled automatically. You can, however, individually name a channel or a video input source.
1 Press MENU. Select the symbol 2 Select Installation using $. Push to to enter.
Select Manual Programme Preset using $. Push to to enter.
3 Select the programme position of the channel or the video source you wish to
label by pushing to $ or 4. Push repeatedly to until the first element of the position LABEL is highlighted.
4 Select a number, a letter, + or a blank using 4 or $. Push to to confirm.
Select the other four characters in the same way.
using $. Push to .
5 Store your selection by pressing OK. 6 To label other channels or video sources repeat steps 3 to 5. 7 Press MENU to return to the normal TV screen.
Skipping of Programme Positions
In case of 100 programme positions there may be unused positions, which you can skip in the menu Manual Programme Preset. When changing channels with the PROGR +/– buttons they do then not appear. You can, however, still select them using the number buttons.
1 Press MENU. Select the symbol 2 Select Installation using $. Push to to enter.
Select Manual Programme Preset using $. Push to to enter.
3 Select the programme position you wish to skip by pushing to 4 or $.
Push to to enter. The column SKIP is highlighted.
4 Select ON using $. 5 Store by pressing OK. 6 To skip other programme positions repeat steps 3 to 5. 7 Press MENU to return to the normal TV screen.
using $. Push to .
Manual Programme Preset
PROG CHSYSSK P LABEL
C09
ARD
B G
Off
1
C10
BBC
B G
Off
2
Off
3
Off Off
5
Off
6
Off
7
Off
8
Off
9
Off
10
Off
11
Select: Enter:
PROG CHSYS
SK P LABEL
C07 TE
Off
6 B/G
Manual Programme Preset
PROG CHSYSSKP LABEL
51
C09
ARD
B G
Off
52
C10
BBC
B G
Off
53
Off
5
Off
55
Off
56
Off
57
Off
58
Off
59
Off
60
Off
61
Off
Select: Ent
PROG CHSSKIP L
53 BG
On
9 Of
Advanced Presetting
Selecting your NexTView Provider*
*depending on availability of service
NexTView is an on-screen electronic programme guide, providing you with programme information on many broadcasters. Your TV set automatically selects a NexTView provider. This provider will be available about 30 minutes after the channel tuning. You can however, also select a provider of your choice. See Using NexTView on page 48 for information on the operation of NexTView.
When using a satellite receiver make sure to connect the receiver to the aerial socket of your TV set.
1 Press MENU. Select the symbol 2 Select Select NexTView using $ Push z o e ter.
A list is displayed containing all a ilabl exTView providers and the supported broadcasters.
using . Push z to enter.
3 Select the desired NexTView rovider by sing 4 or $. Store by pressing OK. 4 Press MENU to return to the no al TV creen.
Using of Furth r Programme Preset
Using t menu Furthe rogramme Preset you can
individu ly attenu te the strength of a channel signal in case of a strong local aerial signal (striped picture).
idually adjust the volume level of each channel.
improve the quality of a weak channel (picture or sound distortions) with manual fine tuning.
d)p eset the AV output for programme positions of those channels with
scrambled signals (e.g. from a Pay TV decoder). In this way a connected Smartlink VCR records the unscrambled signal.
Press MENU. Select the symbol
2 Select Installation using $. Push to enter. Select Further Programme Preset
using $. Push to enter.
3 Select the programme position of the desired channel by pushing 4 or $.
Push repeatedly to select: ATT (RF attenuator), VOL (Volume Offset), AFT (Automatic Fine Tuning) or DECODER. The selected item changes colour.
4a ATT
Push $ to select ON. Store by pressing OK. Repeat steps 3 and 4a if you wish to attenuate other channels.
b VOL
Push 4 or $ to adjust the volume level (range -7 to +7) of the channel. Store by pressing OK. Repeat steps 3 and 4b if you wish to adjust the volume level of other channels.
c AFT
Push 4 or $ to fine tune the channel (range -15 to +15). Store by pressing OK. Repeat steps 3 and 4c if you wish to fine tune other channels.
d DECODER
Push to 4 or $ to select AV1 (Euro AV socket 1) or AV2 (Euro AV socket 2) as output for the video source on this programme position. Store by pressing OK. Repeat steps 3 and 4d if you wish to preset the AV output of other video sources.
Should you use Auto Tuning afterwards, this setting will be cancelled.
5 Press MENU to return to the normal TV screen.
using $. Push to enter.
Channes: EURON
DRS 3SAT ARTE
VOX
Select Next View
Swiss Text
Euro News
Installation
Language/Country Manual Programme Preset
Further Programme Preset
RGB Set Up P cture Rotat on Personal ID Demo
Select: Enter:
Further Programme Preset
PROG AFTVOLATT DECODER
Select: Enter:
PROG AFTVOLATT DECODER
1
PROG AFTVOLATT DECODER
1
PROG AFTVOLATT DECODER
1 On -5
PROG AFTVOLATT DECODER
1 On -5 On
- - - - - - -
1
Off
0
Off
On
2
Off
0
Off
On
3
Off
0
Off
On
5 6 7 8 9 10 11
Off
On
On 0
On
AV1 AV2
O
Off
34
Advanced Operation
40
Advanced Operation
Advanced Presetting
www.ELEKO.de
Advanced Presetting
13
Adjusting the Picture Geometry for an RGB Source
When connecting an RGB source such as a Sony playstation you may need to readjust the picture geometry.
1 Select the connected RGB source 2 Press MENU. Select the symbol 3 Select Installation using $. Push to to enter. Select RGB Set Up using $.
Push to to enter.
4 Select H Centre by pushing to . Adjust the centre of the picture
(range from -10 to +10) using 4 or $. Store by pressing OK.
5 Select H Size using $. Push to to enter. Adjust the horizontal coordinates
(range from -10 to +10) using 4 or $. Store by pressing OK.
by pressing repeatedly.
using $. Push to .
6 Press MENU to return to the normal TV screen.
Adjusting the Picture Rotation
Because of the earth magnetism the picture might slant. In this case you can readjust the picture.
1 Press MENU. Select the symbol 2 Select Installation using $. Push to to enter. Select Picture Rotation using $.
Push to to enter.
3 Adjust the Picture Rotation (adjusting range -5 to +5) by pushing to 4 or $.
Store by pressing OK.
4 Press MENU to return to the normal TV picture.
using $. Push to .
RGB Set Up H Centre
H S ze
Adjust Pos tion: Confirm: OK
RGB Set Up
H Centre
H S ze
Adjust Size: Confirm: OK
Instal ation
Language/Country Manual Programme P t Further Programme eset RGB Set Up
Picture Rota i
Personal ID
Rotate: Confirm:
Inputting Your Personal ID
You can programme your TV with a safety code, so that you can be traced if your TV is stolen and recovered. This code can only be input once!
O
O
O
O
Make sure to write it down in this Instruction Manual.
1 Press MENU. Select the symbol 2 Select Installation using $. Push to t enter. S ect Personal ID using $.
Push to to enter.
3a Select the first of a total of 11 cha ters tter, number, + or a blank) by
using 4 or $.
b Push to to go to the next aracter. c Repeat a and b for all charac s.
using $ Push to .
4 Store by pres ing OK. 5 Press MENU to retu to the normal TV screen.
Ins allat on
Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Picture Rotation
Personal ID
Select A-Z, 0-9
: Store: OK
- - - - - -
Presetting and Labelling of Input Sources
1 Press MENU. Select the symbol 2 Select AV Preset using $. Push to to enter. 3 Select the desired AV input (AV 1, 2 or 3) using 4 or $. Push to enter.
After each step you have the choice between memorizing (press OK) or going to the next item (push to ).
4 To label the source:
a Push to to select Label. b Select the first character using 4 or $. Push to to confirm. c Repeat step b to select the other 4 characters.
d Store by pressing OK. 5 Repeat steps 3 to 4 for the other AV inputs. 6 Selecting the AV3 Input Source:
In case of AV3 you have the choice between the front AV3 sockets BCor the rear Scart 3 L connector.
a Push to $ to select AV3 Input. Push to to enter.
b Select Front or Rear using 4 or $.
c Store by pressing OK. 7 Press MENU to return to the normal TV screen.
using $. Push to .
AV Preset
INPU LABEL
IDEO
A
IDEO
A 2
IDEO
A 3
AV 3 Input Rear
Se ect: Enter:
AV Preset
NPU LABEL A
DEO
A 2
DEO
A 3
DEO
F ont
AV 3 Input
Select Mode: Confirm: OK
Rea
36
Advanced Operation
Advanced Operation
37
14
www.ELEKO.de
Advanced TV operation
Adjusting Picture and Sound
Picture and sound are adjusted at the factory. You can however, adjust them individually.
1 Press MENU.
Select the symbol Push to ” to enter. The menu Picture or Sound Control is displayed.
2 Select the desired item using 4 or $. Push to to enter. 3 Adjust the selected item using 4, $, and . Press OK to store.
Refer to the tables on this and the following page for more information.
4 Repeat steps 2 and 3 to adjust other items. 5 Press MENU to return to the normal TV screen.
Picture Control Item Effect/Operation
Picture Mode $ Live (for live broadcasts)
Contrast Less “” More Brightness* Darker “” Brighter Colour* Less “” More Hue** Reddish “” Greenish Sharpness* Softer “” Sharper Reset Resets picture to the factory preset levels AI 4 Off: normal
(Artificial Intelligence) $ On: Automatic optimization of contrast level
Noise Reduction 4 Off: Normal
Digital Mode $ Normal: 100 Hz
* Only if Personal is selected in Picture Mode ** Only available for NTSC colour signal (e.g. US video tapes)
Sound Control Item Effect/Operation
Equaliser mode Select between the following sound setting
for Picture or for Sound using 4 or $.
Personal (for individual settings)
4 Movie (for movie broadcasts)
according to the TV signal
$ On: Reduces picture noise in case of a weak
broadcasting signal
Digital+: 100 Hz plus line flicker reduction
4 Advanced: Digital+ plus smoothing of motions
$ Personal
Vocal Jazz Rock Pop
4 Flat (fixed setting, cannot be adjusted)
Picture Adjustment
Picture Mode
Contrast Brightness Color Sharpness Reset AI Noise Reduct on Digi al Mode
Select Mode: Enter:
Picture Mode
Contrast
AI
Noise Reduct
Digit ode
Aud o Adjustmen
Equa iser Mode
Equa iser Adjustment Surround Mode SRS Mode Auto Vol. Control Dual Sound Volume Dual Sound
Select Mode: Confirm: OK
Personal
Advanced
Pe sonal
No
Digital
Personal
SRS 2
Normal
Movie
Vocal
Mono
Mono
Advanced TV operation
Sound Control (continued) Item Effect/Operation
Equaliser adjustment
On On
Surround mode 4 Off: Norm
Live
SRS Mode* 4 SRS 1 *on when SRS l d SRS 2 in S rround mode $ SRS 3
Au Volum ntrol 4 On: volume level of the channels will stay the same
ual Sound For a bilingual broadcast:
On
Off
O
Jazz Rock
Pop Fat
SRS
Of
Headphones
2 Volume Less “ ” More 2 Dual Sound For a bilingual broadcast:
** TruSurround is a trademark of SRS Labs, Inc. SRS and the SRS symbol are registered trademarks of SRS Labs, Inc. in the Unites States and selected foreign countries. SRS and TruSurround are incorporated under license from SRS Labs, Inc. and is protected under United States Patent Nos. 4,748,669 and 4,841,572 with numerous additional issued and pending foreign patents. Purchase of this product does not convey the right to sell recordings made with the TruSurround technology.
You can adjust the mode selected in Equaliser mode by cutting and boosting of 5 selected frequency bands. Only the changes made in Personal can be stored, the others return to factory setting. Select the desired bar using ” or “, adjust using 4
and $. Press OK to store
D lby Sur (Pro ogic Tru Surround **) Sele when ceiving Dolby broadcast. A ter th broa return to off, otherwise the
V autom ically selects Dolby for any stereo
oadcast an the sound will be distorted. SR Hall Church Disco
$ Stadium
independent of the broadcast signal (e.g. in case of advertisements)
$ Off: volume level changes according to the
broadcast signal
$ A for channel 1 4 B for channel 2
For a stereo broadcast:
$ Mono 4 Stereo
$ A for channel 1 4 B for channel 2
PAP When PAP is switched on, you can additionally select the PAP sound for the headphones
Equaliser Adjustment
Personal
0 –
20 50 5K 5 K 0 K
Sel: Adjust: Confirm:OK
Aud o Adjustment
Equa iser Mode Equa iser
Adjustment
Surround Mode
SRS Mode Auto Vol. Control Dual Sound Volume Dual Sound
Select Mode: Confirm: OK
SRS Mode
Auto Vol. Control
Dual Sound
Volume
Dual Sound
Dolby Su
Stadum
Chu ch
SRS 2
Ste eo
Disco
Mono
Mono
SRS 2
Mono
Hal
SRS
O
O
Of
On
A
B
44
Advanced Operation
Advanced Operation
45
Advanced TV operation
www.ELEKO.de
Advanced TV operation
15
Using the Features Menu
1 Press MENU. Select the symbol using $. Push z to enter. 2 Select the desired menu item using $. Push z to enter. 3 Select the desired setting using 4 or $. 4 Store by pressing OK. 5 Press MENU to return to the normal TV screen.
Features Item Effect/Operation
Auto Format* 4 On: Automatic selection of the screen format *only for aerial signal $ Off: Normal mode
Format Correction* 4 On: Smart mode is selected automatically for 4:3/ *only if Auto Format is on 14:9 broadcasts
Sleep Timer
Parental Lock $ Off: Normal mode
AV2 Source
$ Off: 4:3/14:9 is selected
You can select a time period after which the TV switches itself into standby mode
4 Off
10 min. 20 min.
.
.
.
$ 90 min.
4 On: TV can only be switched on out of
standby-mode using the Remote Commander, the buttons on the TV do not work.
You can select the source to be output from the Scart connector record from this socket while watching another source.
4 TV audio/video signal from the aerial ˘
AV1 audio/video signal from Scart 1 AV2 audio/video signal from Scart 2
$ AV3 audio/video signal from front or rear connectors
Y
2/j2. In this way you can
Using Multi PIP
Multi PIP (picture in picture) mode displays a succession of 12 still pictur and a 13th that is live. You can manually select which channel you wish o watch, either full-screen or in the PIP mode.
1 Press
2 Press PROGR +/- repeatedly to get the next or the preceding 12 programme
3 Use 4, $, and to move within the 13 displayed channels.
4 When the centre channel is framed, press OK to get the channel full screen or
. Now 13 programme positions appear on the screen, with th curren chann n the centre.
positions .
Press OK to select the framed channel. The selected channel moves to the centre.
to return to the normal TV mode.
press
Features
Auto Format
Format Correction Sleep Timer
Parental Lock AV 2 Source
Select: Enter:
Auto Format
Format Correction
Sleep Timer
Parental Look
AV 2 Source
03 5
02
01 6
13
10
11 09
10 min
AV 3 AV 2 AV
7
Using Screen Mode
On
On
Of Of TV
Off
On
Off
On
O
On
V
When Auto Format in the Features menu is preset to »On« and a format signal is being transmitted, the TV set automatically selects the detected screen format. Screen mode, however, lets you select the screen format of your choice.
Press 9 repeatedly to get one of the f ll wing formats:
Smart imitation of wide screen effec or 4:3 roadcasts, parts of the top and
bottom of the pictur re cut f 4:3 conventional 4:3 aspect tio, fu picture nformation 14:9 compromise betwe 4:3 and 16:9 a pect ratios Zoom imitation of wide s reen effec or letterboxed movies Wide for 16:9 broadcasts
In Zoom and 14:9 modes parts of top and the bottom of the screen are cut off. Usi g 4 and ou can adjust the position of the image onscreen to e.g. read s btitles. Press OK to con rm.
Operating PAP (Picture and Picture)
PAP divides the screen into two for watching two channels simultaneously (with a video source on one if you want). The sound of the left screen is on the TV loudspeakers, the sound of the right screen is selectable via headphones.
Switching PAP on and off
Press
PAP off.
Selecting a PAP source
1 Press > 5.
The symbol > appears in the right screen.
2 Select the desired source using the number buttons (for a TV channel) 7 or
3 (for a video source).
Swapping screens
Press
Zooming the screens
Using the joystick buttons and you can change the size of the two screens.
When you press ” repeatedly the right screen gets bigger, while the left screen gets smaller.
6 once to display the screens in format 4:3 and twice to switch
´/´
Å/a
4 to swap the two screens.
Smart
Zoom
Wide
46
Advanced Operation
Advanced Operation
47
16
www.ELEKO.de
Teletext
Most TV channels broadcast information via teletext. The index page of the teletext service (usually page 100) gives you information on how to use the service.
Make sure to use a TV channel with a strong signal, otherwise there may be Teletext errors.
Direct Access Functions
Switching Teletext on and off
1 Select the TV channel which carries the teletext service you want to view. 2a Press f once for Picture and Teletext (P&T).
The screen is divided in two, with the TV channel in the right corner and the Teletext display on the left. P&T mode: Press
TV screen. Push or to change the size of the TV screen. Press
b Press f twice to get Teletext only.
c Press f three times for Mix mode.
The TV broadcast and the Teletext display are overlapped.
3 Press
Selecting a Teletext Page
Direct Page Selection
Input the three digits of the page number using the number buttons 7.
If you have made a mistake: Type in any three digits, then re-enter the correct page number.
Page Catching 1 Select a teletext page which has several page numbers on it (e.g., the index
page).
2 Press OK !¡.
Page Catching is displayed.
3 Select the desired page number using 4 or $ and press OK.
The requested page is displayed after some seconds.
Selecting the next or the preceding page
Press
Selecting the index page
Press
Selecting a subpage
A teletext page may consist of several subpages. In this case an information line is displayed, showing the number of subpages. Select the mode by pushing 4. Select the subpage by using 4 or $.
Freezing a Teletext subpage
1 Press !• or R 3
The symbol R is displayed and the subpage is not updated.
2 Press f to resume normal teletext reception.
Using Fastext*
*depending on availability of service
Fastext lets you access pages with one button stroke. When Fastext is broadcast, a colour-coded menu appears at the bottom of the screen. The colours of this menu correspond to the red, green, yellow and blue buttons 9, , !∞, on the Remote Control. Press the coloured button which corresponds to the colour in the
colour-coded menu.
50
Advanced Operation
Å/a
4. Press PROGR +/- to change the channel of the
Å/a
4 again to resume normal teletext reception.
;
or press f a fourth time to switch teletext off.
(Page +) or
+
2.
(Page -).
100
Teletext TV
216-02
01 04 05 06 07 0802
Teletext
Using the Teletext Menu
This TV set has a menu-guided teletext system. When teletext is switched on you can use the joystick buttons to operate the teletext menu.
Select the menu functions as follows:
1 Press MENU !™.
The Teletext menu is superimposed onto the teletext display.
2 Select the teletext function using 4 or $ . Push to enter.
01
Top/Bottom/Full
For convenient reading of a Tel ext pa e ou can nlarge it. After having selected the functi sub nu T p 4 Bottom $ Full OK is displayed.
Push 4 to enlarge the upper alf of the c een, push $ to enlarge the lower
half. Press OK to resume the n mal si e. Press f to e the normal Teletext operation.
Text Cle r
After h ving selected e function, you can watch a TV channel while waiting for a requ ted Telet xt page. As soon as the page is available, the symbol f changes colour.
f t view the page.
Re eal
Some teletext pages contain hidden information (e.g., for a quiz), which you can reveal. After having selected the function, the hidden information appears.
Press f to resume the normal Teletext operation.
Time Page*
*depending on availability of service
You can call up a time-coded page - such as an alarm page - at a time specified by you.
After having selected the function a sub menu is displayed.
1 Select On using 4 or $. Push to enter. 2 Enter the three digits of the desired page using the number buttons 7. 3 Enter the four digits of the desired time using the number buttons 7. 4 Press OK to store.
The time is displayed in the top left-handed corner of the screen. At the requested time the page is displayed.
Teletext
Top / Bottom / Full
Text Clear Reveal Time Page
Select: Enter Menu:
Top: Bottom: Full: OK
Time Page
PAGE TIME – – – - - : - -
Select: Enter
Advanced Operation
51
SECTION 2
www.ELEKO.de
DISASSEMBLY
2-1. REAR COVER REMOVAL
2 Rear Cover
CAUTION:
Take care not to damage the C Board when removing or refitting the rear cover.
2-2. CHASSIS ASSY REMOVAL
1 6 Screws BTV 4x16
2-3. SERVICE POSITION
2-4. U BOARD REMOVAL
1 Push the claw in the direction of the arrow and remove.
2 Pull the Board in the direction of the arrow and remove.
17
2-5. J BOARD REMOVAL
www.ELEKO.de
2-6. J SHIELD REMOVAL
1 Push the claw in the direction of the arrow and remove.
1 Push the claw in the direction of the arrow and remove.
3 Remove the shield in the direction of the arrow.
2 Push the claw in the direction of the arrow and remove.
2 Pull the Board in the direction of the arrow and remove.
NOTE
All other boards are removed in a similar manner to those shown
2-7. B1 BOARD REMOVAL
18
2-8. PICTURE TUBE REMOVAL
www.ELEKO.de
Degaussing coils 8
Spring tension 9
C board 3
VM board 4
Neck assy 5
Deflection yolk 6
Anode cap 1
7 DGC holder
2 Chassis assy
10 Four PT screws
Picture tube 11
Cushion
• REMOVAL OF ANODE-CAP
Note : Short circuit the an de of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT, after removing the anode.
* REMOVING PROCEDURES.
c
Anode button
a
1
Turn up one side of the rubber cap in the direction indicated by the arrow a
HOW TO HANDLE THE ANODE-CAP
b
2 Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow b
b
3 When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c
1 To prevent damaging the surface of the anode-cap do not use sharp materials. 2 Do not apply too great a pressure on the rubber, as this may cause damage to
the anode connector.
3 A metal fitting called a shatter hook terminal is fitted inside the rubber cap.
Do not turn the rubber foot over excessively this may cause damage if the shatter hook sticks out.
19
REMOVAL AND REPLACEMENT OF THE MAIN-BRACKET
www.ELEKO.de
BOTTOM PLATES.
For safety reasons, on no account should the plates be
£
removed and not refitted after servicing.
(1) REMOVING THE PLATES
In the event of servicing being required to the solder side of the D Board printed wiring board, the bottom plates fitted to the main chassis bracket require to be removed. This is performed by cutting the gates with a sharp wire cutter at the locations indicated by arrows.
Note :There are 4 plates fitted to the main bracket and secured by 4 gates.
Only remove the necessary plate to gain access to the printed wiring board.
20
(2) REFITTING THE PLATES
Because the plates differ in size it is important that the correct plates are refitted in their original location.
Please note that the plates need o be rotated 180 degrees from the cut position to allow the tabs to be fitted in the catch po itions.
Catch
Tab
SECTION 3
www.ELEKO.de
SET-UP ADJUSTMENTS
When complete readjustment is necessary or a new picture tube is installed, carry out the following adjustments.
Unless there are specific instructions to the contrary, carry out these adjustments with the rated power supply.
Unless there are specific instructions to the contrary, set the controls and switches to the following settings:
Contrast ............... normal
Brightness ............... normal
3-1.BEAM LANDING
Preparation:
1. In order to reduce the influence of geomagnetism on the set’s picture tube, face it in an easterly or westerly direction.
2. Switch on the set’s power and degauss with the degausser.
(1) Adjustment of Correction Magnet for Y-Splitting
Axis
1. Input a crosshatch signal from the pattern generator.
2. Set the Picture control to minimum and confirm that he Brightness control is set to normal.
3. Position the neck assembly as indicated in Fig 3-2.
4. Move the deflection yolk as far forward as is possible.
5. Adjust the upper and lower pin symmetrically by opening or closing the Y-splitting axis correction magnets locat d on the neck assembly.
6. Return the deflection yolk to its origin l pos tion.
Carry out the following adjustments in this order:
3-1. Beam Landing 3-2. Convergence 3-3. Focus 3-4. White balance
Note: Test equipment required
1. Color bar/pattern generator.
2. Degausser.
3. Digital multimeter.
4. Oscilloscope.
(2) Landing
Note :Before carrying out the following adjustments
adjust the magnets as indicated below [See Fig.3-3].
1. Input an all-white signal from the pattern generator. M ximize the picture setting and adjust the Brightness setting
2. Rough-adjust the focus an d horizontal convergence.
3 Loosen the deflection yolk screws and align the purity
adjustment knob to its central position. [See Fig.3-1].
4. Switch from the all-white pattern to an all-green pattern.
5 Move the deflection yolk backwards and adjust with the
purity magnet so that the green is at the centre and it aligns symmetrically . [See Fig.3-4].
6. Move the deflection yolk forward and adjust so that the entire screen becomes green.
7. Switch the raster signal to red, then to blue and verify the landing condition.
8. When the position of the deflection yolk has been determined, fasten the deflection yolk with the screw.
9. If the beam does not land correctly in all the corners of the screen, use magnets to correct it. [See Fig.3-5].
Y-splitting axis correction magnet
Align Pips on each
magnet
Purity
Caution :
High voltages are present on the Deflection yolk terminals - take care when handling the Deflection yolk whilst carrying out adjustments.
Deflection yoke
Fig.3-1
Align the bottom edge of the neck assy with the G3 hole centre.
21
Fig.3-3
Neck assy
Fig.3-2
GREEN
www.ELEKO.de
Center dot
RED
BLUE
Fig.3-4
Disk magnets or rotatable disk
Purity control corrects this area.
Deflection yoke positioning corrects these areas
magnets correct these areas (a-d).
If the horizontal dots are unable to coincide with the variable
H.STAT
convergence
control
H.STAT convergence
range of the H.STAT convergence, adjust together with the V.STAT convergence while tracking. [Adjust the convergence by tilting the V.STAT convergence or by opening and closing the V.STAT convergence.]
(Open)
V.S TAT
vertical static magnet
H.STAT VR on
mount side RV5376
Screen (G2)
(Close)
Fig. 3-5
3-2.CONVERGENCE
(1) Screen centre convergence
[Static convergence]
1. Input a dot signal from the pattern generator. Normalize the picture setting.
2. [Moving horizontally], adjust the H.STAT control so that the horizontal red, green and blue dots coincide at the centre of the screen.
3. [Moving vertically], adjust the V.STAT magnet so that the vertical red, green and blue dots coincide at the centre of the screen.
4. Movement of the red, green and blue dots by tilting the V.STAT magnet and by opening or closing the V.STAT magnet.
a). By opening or closing the V.STAT magnet, the red, green and
blue dots move as indicated below.
B G
R
b). By rotating the V.STAT magnet counter
clockwise, the red, green and blue dots move as indicated below.
B
B G
R
GR
22
c). By rotating the V.STAT magnet clockwise, the red, green and
www.ELEKO.de
blue dots move in the direction indicated below.
B
GR
HAMP
d). By opening or closing the V.STAT magnet, the red, green and
blue dots move in the direction indicated below.
R
G
Note : If the blue dot does not coincide with the red and
green points correct the points by using the BMC [Hexapole] magnet.
5. Correction for HMC [horizontal mis-convergence] and VMC [vertical mis-convergence] by using the BMC [Hexapole] magnet.
a). HMC correction by BMC [Hexapole] magne and movement
of the electron beam.
HMC correction(A) HMC correc ion(B)
A < B
RG B
B
G
A > B
R
RGB
B
7. HTIL correction can be performed by adding a THL correction ASSY to the DY.
TLH correction Assy
4-057-714-01
HTIL
A = B
RG B
b). VMC correction by BMC [Hexapole] magnet and movement
of the electron beam.
VMC correction(A) VMC correction(B)
C < D
C
D
C = D C > D C = D
R G
B
R
C
G
D
B
R G
B
A = B
R G
B
RG B
23
Layout of each control
www.ELEKO.de
3-3.FOCUS
Purity magnet BMC (Hexaploe) magnet
V STAT convergence magnet Y-splitting axis correction magnet
Fig 3-5
Note : If you are unable to adjust the corner convergence
properly , this can be corrected with the use of permalloys.
a
b
1. Receive a television broadcast signal.
2. Normalize the picture setting.
3. Adjust the focus control located on the flyback transformer to obtain the best focus at the centre of the screen. Bring only the centre area of the screen into focus, the magenta-ring appears on the screen. In this case, adjust the focus to optimize the screen uniformly.
FOCUS
Permalloy Assy X-4387-214-1
a-d: screen-corner convergence defect
c
d
3-4.SCREEN (G2), WHITE BALANCE
[Adjustment in the service mode using the remote commander]
G2 adjustment (RV5376)
1. Input a dot signal from the pattern generator.
2. Set the Picture, Brightness and Colour to minimum.
3. Apply 175V DC from an external power supply to the R, G and B cathodes of the CRT.
4. Whilst watching the picture, adjust the G2 control RV5376 [SCREEN] located on the C Board to the point just before the flyback return lines disappear.
Convergence adjustment with permalloy
24
White balance adjustment for TV mode
www.ELEKO.de
Backend
1. Input an all-white signal.
2. Enter into the Service Mode by pressing ‘TEST’, ‘TEST’ and ‘MENU’ ‘MENU’on the Service Commander.
3. Select ‘Backend’ from the on screen menu display and press ‘OK’.
4. The ‘Backend’ menu will appear on the screen.
5. Set the contrast to MAX.
6. Set the ‘R DRIVE’ to 41.
7. Adjust the ‘G DRIVE’ and ‘B DRIVE’ so that the white balance becomes optimum.
8. Press the ‘OK’ button to write the data for each item.
9. Set the contrast to MIN.
10. Set the ‘R CUT-OFF’ to 31.
11. Adjust the ‘G CUT-OFF’, and ‘B CUT-OFF’ with the left and right buttons on the remote commander so that the white balance becomes optimum.
12. Press the ‘OK’ button to write the data for each item.
No Descr. Def Min Max Data
1R-on ONOFFON ON 2G-on ONOFFON ON 3 B-on ON OFF ON ON 4 D-col OFF OFF ON ON 5Color-axis 2032 6Contrast 6306363 7Limit-Luv 3033 8Hue 3106331
9Colour 3106328 10CTI -Level 2032 11 Brightness 31 0 63 31 12Gamma 2032 13 Sharpnes 31 0 63 44 14LTI-Level 0030
5 R-Drive 41 0 63 40 6 BLK-Bottom 0030
7G-Drive 4106338 18ABL-TH 0030 19 B-Drive 41 0 63 21 20ABL-Mode 2032 21 Sub Bright 31 0 63 32 22VM-Level 2032 23 R-Cutoff 31 0 63 41 24Preover 2032 25 G-Cutoff 31 0 63 45 26DPIC-Level 2032 27 B-Cutoff 31 0 63 48 28DC-Tran 1031 29 Sub-Cont 7 0 15 7 30 LRGB2-Lvl 12 0 15 12 31 P-Abl 15 0 15 15 32 DL-Pass OFF OFF ON OFF 33 Sharp.Fo ON OFF ON ON 34 Aging-W OFF OFF ON OFF 35 Aging-B OFF OFF ON OFF 36 CB-offset1 7 0 15 7 37 CR-offset1 7 0 15 7 38 CB-offset2 7 0 15 7 39 CR-offset2 7 0 15 7 40 Sub Colour 0 -8 8 -1
25
SECTION 4
www.ELEKO.de
CIRCUIT ADJUSTMENTS
4-1.ELECTRICAL ADJUSTMENTS
Service adjustments to this model can be performed using the supplied Remote Commander RM-891.
HOW TO ENTER INTO SERVICE MODE
1. Turn on the main power switch of the set while pressing PROG + (plus) and PROG - (minus) buttons on the top panel.
PROGR
+
2. "TT" will appear in the upper right corner of the screen.
3. Press the ‘MENU’ button twice on the remote commander to obtain the service menu on the s reen.
+
CONTROL
SERVICE MENU
Initialising Reset Devices Monitoring
ackend Defl ction Dynamic Convergence
RESET DEVICES
Backend Deflection Dynamic Convergence Colour Decoder 1 Colour Decoder 2 Feature Box PIP Sound
4. Push the joystick up or down on the remote commander to select the adjustment item.
5. Push the right button to proceed to the next menu.
6. If the required adjustment item is ‘Deflection’, push the down button to move to ‘Deflection’.
7. Push the joystick to the right to enter into ‘Deflection’.
8. Change the data in order to comply with each standard.
NOTE:
Before performing any adjustments assure that the correct model has been selected in the Model Setting menu.
After carrying out the service adjustments, to prevent the customer accessing the Service Menu switch the TV set OFF and then ON.
Colour Decoder 1 Colour Decoder 2 Feature Low - End PIP Special Adjustment
Select :
Next Menu
INITIALISING
Model Setting Basic Setting Feature Setting
MONITORING
Device Status monitor Error Monitor Production Monitor NVM Monitor Line 23 Monitor
26
Model Setting
www.ELEKO.de
Backend
1 KV-29FX60A/D/E 2KV-29FX60B 3KV-29FX60U 4 KV-29FC60A/D/E 5 KV-29FC60B 6 KV-29FC60K 7 KV-29FC60R 8 KV-29FS60A/D/E
9KV-29FS60B 10 KV-29FS60K 11 KV-29FS60R 12 KV-28/32FX60A/D/E 13 KV-28/32FX60B 14 KV-28/32FX60K 15 KV-28/32FX60R 16 KV-28/32FX60U 17 KV-29FS60A/D/E 18 KV-29FS60B
Fig.4-1
Basic setting
No Descr. Min Max Data
1 Sys.B/G OFF ON ON 2 Sys.D/K OFF ON ON 3Sys.L OFFON ON 4 Sys I (UK) OFF ON OFF 5 Sys I (IRL) OFF ON OFF 6 Russian sound OFF N OFF 7 TXT Nod.option 1 4 3 8 simple PAT OFF ON OFF
9 16:9 CRT OFF ON OFF 10 Sub-woofer OFF ON ON 11 Auto stand-by OFF ON ON 12 comb-filter OFF ON OFF 13 Auto YC det OFF ON ON 14 Auto comb det OFF ON OFF 15 AV2 Available OFF ON ON 16 AV3 Available OFF ON ON 17 AV4 Available OFF ON OFF 18 AV3 Front & rear OFF ON ON 19 SECAM Tape OFF ON OFF
No Descr. Def Min Max Data
1R-on ONOFFON ON 2G-on ONOFFON ON 3 B-on ON OFF ON ON 4 D-col OFF OFF ON ON 5Color-axis 2032 6Contrast 6306363 7Limit-Luv 3033 8Hue 3106331
9Colour 3106328 10CTI -Level 2032 11 Brightness 31 0 63 31 12Gamma 2032 13 Sharpne s 31 0 63 44 14LTI-Level 0030
5 R Drive 41 0 63 40
6 BLK-Bottom 0030 17G-Drive 4106338 18ABL-TH 0030 19 B-Drive 41 0 63 21 20ABL-Mode 2032 21 Sub Bright 31 0 63 32 22VM-Level 2032 23 R-Cutoff 31 0 63 41 24Preover 2032 25 G-Cutoff 31 0 63 45 26DPIC-Level 2032 27 B-Cutoff 31 0 63 48 28DC-Tran 1031 29 Sub-Cont 7 0 15 7 30 LRGB2-Lvl 12 0 15 12 31 P-Abl 15 0 15 15 32 DL-Pass OFF OFF ON OFF 33 Sharp.Fo ON OFF ON ON 34 Aging-W OFF OFF ON OFF 35 Aging-B OFF OFF ON OFF 36 CB-offset1 7 0 15 7 37 CR-offset1 7 0 15 7 38 CB-offset2 7 0 15 7 39 CR-offset2 7 0 15 7 40 Sub Colour 0 -8 8 -1
Fig.4-3
Fig.4-2
NOTE:
The above table is dependant on model, destination & size.
27
Feature setting
www.ELEKO.de
Deflection
No Descr. Min Max Data
1PIP OFFON ON
Fig.4-4
Colour Decoder 1
No Descr. Def Min Max Data
1 DelayLinMd OFF OFF ON OFF 2Gain set 1031 3 Y-Delay 7 0 15 7 4Phase Time 0030 5 Vid Ident Md OFF OFF ON OFF 6 Sync Mode OFF OFF ON OFF 7 Vid Ident Sw ON OFF ON ON 8 H-Output OFF OFF ON OFF
9 Enagating OFF OFF ON OFF 10 IF Circuit ON OFF ON ON 11 GP Delay OFF OFF ON OFF
No Descr. Def Min Max Data
1 V-Size 31 0 63 34 2V-Position 3106321 3V-Comp 1031 4 V-Linear 7 0 15 7 5S-Corr 7 0158 6 H-Size 31 0 63 29 7 EW-DC OFF OFF ON OFF 8 Pin-Amp 31 0 63 36
9Up-Cpin 3106335 10M-Pin 2032 11 Lo-Cpin 31 0 63 37 12 Trapezium 7 0 15 7 13 H-Positon 31 0 63 25 14 AFC-B w 7 0 15 7 15 A C-Angle 7 0 15 9 16 Up Vlin 0 0 15 0 17 L Vlin 0 0 15 0
Fig.4-7
Fig.4-5
Colour Decoder 2
No Descr. Def Min Max Data
1 DelayLinMd OFF OFF ON OFF 2Gain set 031 3 Y-Delay 7 0 15 7 4Phase Time 0030 5 Vid Ident Md OFF OFF ON OFF 6 Sync Mode OFF OFF ON OFF 7 Vid Ident Sw ON OFF ON ON 8 H-Output OFF OFF ON OFF
9 Enagating OFF OFF ON OFF 10 IF Circuit ON OFF ON ON 11 GP Delay OFF OFF ON OFF
Fig.4-6
Dynamic Convergence
No Descr. Def Min Max Data
1 Range 63 0 63 32 2 H Stat 33 0 63 33 3 H amp L 37 0 63 37 4 H amp R 36 0 63 36 5Up Y 3106331 6Low Y 3306333 7Y Up L 3006330 8Y Up R 3006330
9Y Low L 3106331 10 Y Low R 30 0 63 30 11Mbow Up L 3106331 12Mbow Up R 3206332 13 Mbow Low L 32 0 63 32 14 Mbow Low R 32 0 63 32 15 V Stat 32 0 63 32 16 Linearity 128 0 255 104 17 H Centre 32 0 63 32 18 H Trap 32 0 63 32 19 Rotation 0 0 255 0 20 Focus Phase 128 0 255 128
Fig.4-8
28
Feature Low-End
www.ELEKO.de
Feature Low-End(Cont.)
No Descr. Def Min Max Data
1 F.S.F.M OFF OFF ON OFF 2 G-Mode OFF OFF ON OFF 3 Picture Pos 0 0 3 0 4 Comp Mode OFF OFF ON OFF 5 CompSW OFF OFF ON OFF 6 Acqu.freq OFF OFF ON OFF 7 Still Pic OFF OFF ON OFF 8 Init OFF OFF ON OFF
9 Dis Feature ON OFF ON ON 10 Dis Vlimit ON OFF ON ON 11 Scr Fade 0 0 3 0 12 Hwe Delay 20 0 255 20 13 Auto Vshift OFF OFF ON OFF 14 Vwe Delay 0 0 127 0 15 SFR sw OFF OFF ON OFF 16IPQ 0030 17 D.Col Dec OFF OFF ON OFF 18 Blankfield 0 0 15 0 19 P1.5 OFF OFF ON OFF 20 P1.4 OFF OFF ON OFF 21 P1.3 OFF OFF ON OFF 22 P1.2 OFF OFF ON OFF 23 P1.1 OFF OFF ON OFF 24 Set Vdba OFF OFF ON OFF 25 Set Sidep ON OFF ON ON 26 Set Hwe OFF OFF ON OFF 27 Set Clv OFF OFF ON OFF 28 Set Hddel OFF OFF ON OFFF 29 Set Hblnd OFF OFF ON OFF 30 Set Hre ON OFF ON ON 31 Set Hbda ON OFF ON ON 32 Set Hdav ON OFF ON ON 33 Vbdasta 0 0 255 0 34 Vsdasto 0 0 255 0 35 Msbhwesto OFF OFF ON OFF 36 Msbhwesta OFF OFF ON OFF 37 Msbvbdasto OFF OFF ON OFF 38 Msbvbdasta OFF OFF ON OFF 39 Hdavsta 40 0 255 40 40 Hdavsto 255 0 255 255
No Descr. Def Min Max Data
41 Hbdasta 223 0 255 223 42 Hbdasto 222 0 255 222 43 Hresta 38 0 255 38 44 Hresto 202 0 255 202 45 Hblndsta 31 0 255 31 46 Hblndsto 30 0 255 30 47 MsbHblndsta OFF OFF ON OFF 48 MsbHblndsto OFF OFF ON OFF 49 Msb Hresto ON OFF ON ON 50 Msb Hresta OFF OFF ON OFF 51 Msbhbdasta ON OFF ON ON 52 Msbhbdasto ON OFF ON ON 53 Msbhdav to ON OFF ON ON 54 Msbhdavs a OFF OFF ON OFF
5 Hddel 0 0 15 0
Clvsta 0 0 255 0
7 Clvsto 9 0 255 9 58 Hwesta 44 0 255 44 59 Hwesto 208 0 255 208 60 Ex-Thres OFF OFF ON OFF 61 Wes ON OFF ON OFF 62 Demo mode ON OFF ON OFF 63Limerick NR 0040 64 Nthr 0 0 255 2 65 Wval 200 0 255 200 66 Agc Ych 203 0 255 203 67 Agc Uvch 209 0 255 209 68 Aal-Bypass OFF OFF ON OFF 69 Stby Fr OFF OFF ON OFF 70 Lsb Agc-Uv OFF OFF ON OFF 71 Lsb Agc-Y OFF OFF ON OFF 72Vcl cor 0030 73Ucl cor 0030 74Uv cor mode 0030 75Uvcl tau 3033 76Uvcol Lvl 0030 77 Fil Mem OFF OFF ON OFF 78Overl Thr 1031 79Y delay f 4074 80 Dcti pdxsel ON OFF ON ON
Fig.4-9
29
Loading...
+ 65 hidden pages