Sony RM-946, KV-29CL10U Quick Start Manual
Checking the
OUT IN
VCR
or
Connecting the Aerial
S®
Thank you for purchasing this Sony product.
After following this step by step guide you
will be able to:
Insert Batteries into the Remote Control.
Connect the Aerial and VCR to your TV.
Select the language of the menu screens.
Adjust the picture slant.
KV-29CL10U
Accessories Supplied
2 Batteries (AA size)
Remote Control RM-946
1
and VCR
3
Connecting cables are not supplied.
The Scart lead is optional.
If you use this optional connection it can improve the picture and
sound quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the TV refer
to the “Manual Programme Preset” option on page 14 step a) of the
instruction manual, to tune in the TV to the output of your VCR. Also
refer to your VCR instruction manual to find out how to find the
output channel of your VCR.
Tune your TV.
Change the broadcast channels into a
different order.
View TV Programmes.
Inserting Batteries into
the Remote Control
• Make sure you insert the supplied batteries using the
correct polarities.
• Always remember to dispose of used batteries in an
environmental friendly way.
2
Switching on the TV
4
Connect the TV plug
to the mains socket
(220-240V AC, 50Hz).
Quick Start Guide
FD Trinitron
Colour Television
4-094-824-01 (1)
©2003 by Sony Corporation Printed in Spain
Ecological Paper - Totally Chlorine Free
The first time the TV set is
connected, it is usually turned on. If
the TV is off, push in the On/Off
switch on the front of the TV
Selecting the language
Automatically Tuning
Changing the Programme Order
of the menu screens
This TV set works with menu screens. By following the
instructions below, you can select the desired language of the
menu screens.
5
Language
i
4
Svenska
Norsk
English
Nederlands
Français
Italiano
$
i
Select Language:
Language
i
4
Svenska
Norsk
English
Nederlands
Français
Italiano
$
i
Select Language:
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
OK
Correcting the Picture
Slant
Because of the earth’s magnetism, the picture might slant.
By following the instructions below, you can correct the
picture slant if it is necessary.
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
The first time that you switch on your
TV, the Language menu appears
automatically.
Press the or button on the
remote control to select the language,
then press the OK button on the
remote control to confirm your
selection.
OK
The Picture Rotation menu appears on
the screen.
OK
a) If it is not necessary, press OK to
select Not necessary.
b) If it is necessary, press or to
OK
select Adjust now, then press
OK and correct any slant of the
picture between –5 and +5 by
pressing or . Finally press
OK to store.
6
the TV
You need to tune the TV to receive channels.
By following the instructions below, this TV automatically
searches and stores all available broadcast channels for you.
7
Do you want to start
automatic tuning?
Ye s
No
Auto Tuning
Programme: 01
Channel: I21
Searching...
No channel found
Please connect aerial
Confirm
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
Select channel:
Exit:
MENU
Press the OK button on the remote
control to select Yes.
OK
The TV starts to automatically search
and store all available broadcast
channels for you.
This procedure could take some
minutes.
Please be patient and do not press
any buttons while the automatic
tuning is in progress. Otherwise
automatic tuning will not be
completed.
If no channels were found
during the auto tuning process
then a new menu appears
OK
OK
automatically on the screen
asking you to connect the aerial.
Please connect the aerial (see
step 3) and press OK. The auto
tuning process will start again.
When the automatic tuning is finished,
the Programme Sorting menu appears on
the screen.
of the broadcast channels
By following the instructions below, you can rearrange the
order in which broadcast channels appear on the screen.
8
a) If you wish to keep the broadcast channels in
the tuned order:
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
Select channel:
Exit: MENU
b) If you wish to store the broadcast channels in
a different order:
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58
Select channel:
Exit: MENU
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
04 C33
05 C27
06 C58 05 C27
Select new position:
Exit:
MENU
• Press the MENU button on the
remote control to exit and
return to the normal TV screen.
OK
OK
OK
Your TV is now ready for use.
• Press the or button on the
remote control to select the
programme number with the
broadcast channel you wish to
rearrange, then press the
button.
• Press the or button on the
remote control to select the new
programme number position for
your selected broadcast channel,
then press the OK button.
• Repeat all the above steps if you
wish to change the order of the
other broadcast channels on your
TV.
• Press the MENU button on the
remote control to exit and return
to the normal TV screen.
Do you want to start
automatic tuning?
Ye s
No
Your TV is now ready for use.
The automatic tuning menu appears on
the TV screen.
OK
Your television stations are now stored in your television’s memory.
Loading...