Sony KDL-46XBR5, KDL-46XBR4, KDL-40XBR5 Installing

Screw and Hook locations diagram/table
Model Name Screw location Hook location
KDL-40XBR4 e, g b
KDL-46XBR4 e, g b
KDL-52XBR4 d, g a
KDL-40XBR5 e, g b
KDL-46XBR5 e, g b
KDL-52XBR5 d, g a
3-214-430-11(1)
Installing the Wall-Mount Bracket
Screw location
When installing the Mounting Hook on the TV.
d
e
f
g
d
e
f
g
h
j
h
j
d
e
f
g
h
j
Hook location
When installing the TV onto the Base Bracket.
a b
c*
* Hook position “c” cannot be used for the models in the table above.
To Customers
For product protection and safety reasons, Sony strongly recommends that wall-mounting of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
Your KDL-40XBR4/KDL-40XBR5/KDL-46XBR4/KDL-46XBR5/KDL-52XBR4/KDL-52XBR5 can be wall-mounted using the SU-WL500 Wall-Mount Bracket (sold separately). Please provide your licensed contractor with this installation supplement as well as the Instructions (supplied with the SU­WL500 Wall-Mount Bracket). Read these documents carefully for safety and proper installation.
Provide full attention to safety during the installation, periodic maintenance and examination of this product.
Printed in Mexico
KDL-40XBR4 KDL-40XBR5 KDL-46XBR4 KDL-46XBR5 KDL-52XBR4 KDL-52XBR5
© 2007 Sony Corporation
Installing the TV on a wall
The TV can be installed on a wall by attaching a Wall­Mount Bracket (sold separately). Verify your TV’s model number and be sure to use the bracket specified for your model only. Refer to the Steps on this leaflet along with the Instructions supplied with the SU-WL500 Wall-Mount Bracket, to properly carry out the installation.
Sufficient expertise is required in installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
For product protection and safety reasons, Sony strongly recommends that you use the Wall­Mount Bracket model designed for your TV and that the wall-mounting of your TV is performed by Sony dealers or licensed contractors.
Step 4: Preparing for the
installation of the TV
Before detaching the Table-Top Stand, disconnect all the cables from the TV. Refer to Operating Instructions supplied with the TV set for removing the Table-Top Stand.
For mounting hook installation, refer to the Screw and Hook locations diagram/table in the last page of this leaflet.
Step 5: Installing the TV on the
wall
Refer to the Instructions for SU-WL500.
TV installation dimensions table
Screen center point
Display Screen center
Model Name
dimensions dimensions
AB C DEFGH
)
8
/
5
320 (12
Unit: mm (inches)
Length for each mounting angle
Angle (0˚) Angle (20˚)
Step 1: Checking the parts
required for the installation
Open the Wall-Mount Bracket package and check the contents for all required parts along with the Instructions.
Step 2: Deciding on the
installation location
Decide where you want to install your TV. Refer to right side for the TV installation dimensions table.
Refer to the Instructions for SU-WL500.
Step 3: Installing the Base
Bracket on the wall
Refer to the Instructions for SU-WL500.
KDL-40XBR4
KDL-46XBR4
KDL-52XBR4
KDL-40XBR5
KDL-46XBR5
KDL-52XBR5
Figures in the above table may differ slightly depending on the installation.
1,111 657 176 509 181 349 621 550
(43 3/4) (25 7/8) (7) (20 1/8) (7 1/4) (13 3/4) (24 1/2) (21 3/4)
1,262 734 128 500 181 378 694 542
(49 3/4)(29) (5 1/8) (19 3/4) (7 1/4)(15) (27 3/8) (21 3/8)
1,415 827 73 491 183 415 781 533
(55 3/4) (32 5/8) (2 7/8) (19 3/8) (7 1/4) (16 3/8) (30 3/4) (21)
1,111 657 176 509 183 349 621 550
(43 3/4) (25 7/8) (7) (20 1/8) (7 1/4) (13 3/4) (24 1/2) (21 3/4)
1,262 734 128 500 183 378 694 542
(49 3/4)(29) (5 1/8) (19 3/4) (7 1/4)(15) (27 3/8) (21 3/8)
1,415 827 73 491 185 415 781 533
(55 3/4) (32 5/8) (2 7/8) (19 3/8) (7 3/8) (16 3/8) (30 3/4) (21)
WARNING
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to your TV’s instructions for its weight.
Loading...