Thank you for choosing this Sony product. Before operating
the TV, please read this manual thoroughly and retain it for
future reference.
~
• Instructions about “Installing Wall Mount Bracket” are
included within this TV’s instructions manual.
• The illustrations used in this manual may differ depending on
your TV model.
• The illustrations of the remote control used in this manual are
of the RM-GD027 unless otherwise stated.
• Before operating the TV, please read page 28 (Safety
Information). Retain this manual for future reference.
Trademark information
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks of the Digital
Living Network Alliance.
Manufactured under license from Dolby Laboratories.
“BRAVIA” and are trademarks of Sony Corporation.
TrackID is a trademark or registered trademark of Sony Mobile
Communications AB.
Music and video recognition technology and related data are
provided by Gracenote®. Gracenote is the industry standard
in music recognition technology and related content delivery.
For more information, please visit www.gracenote.com.
Gracenote, MusicID, VideoID, Video Explore, the Gracenote
logo and logotype, and the “Powered by Gracenote” logo are
either registered trademarks or trademarks of Gracenote in
the United States and/or other countries.
Opera® Devices SDK from Opera Software ASA. Copyright
1995-2013 Opera Software ASA. All rights reserved.
Wi-Fi, Wi-Fi Direct and Miracast are marks or registered marks
of the Wi-Fi Alliance.
“Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are
trademarks of Blu-ray Disc Association.
“Sony Entertainment Network logo” and “Sony Entertainment
Network” are trademarks of Sony Corporation.
MHL, Mobile High-Definition Link and the MHL Logo are
trademarks or registered trademarks of MHL Licensing, LLC.
Manufactured under license from DTS Licensing Limited. For
U.S. and worldwide patent and trademark information, see
www.dts.com/patents/ legacy.aspx.
(c) DTS Licensing Limited and DTS, Inc. 2012.
®2012 RealNetworks, Inc. Patents Pending. All rights
reserved. RealNetworks logo is a trademark of RealNetworks,
Inc.
The Bluetooth® word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other trademarks and trade
names are those of their respective owners.
This television is designed for use
in Hong Kong and ensured the
usage in Hong Kong only.
Location of the identification label
Labels for Model No. and Power Supply rating (in accordance
with applicable safety regulation) are located on the rear of the
TV.
GB
2
Page 3
GB
GB
3
Page 4
About this manual
This manual explains how to set up your TV. For more
information on how to use BRAVIA TV, refer to the “Electronic
manual”.
Operating Instructions
Electronic manual
(i-Manual)
Explains how to set up your TV such as connections,
initial set-up, and basic operations.
For more information, press the i-MANUAL button
Explains how to use all the features. See page 19 on
how to use the i-Manual.
Images and illustrations used in this manual may differ from
the actual screen.
(Operating Instructions)
GB
4
Page 5
Table of Contents
Getting Started
Checking the accessories.........................................................................6
Inserting batteries into the remote control................................................. 6
1: Attaching the Table-Top Stand .............................................................7
2: Adjusting the viewing angle of the TV...................................................8
* Refer to the supplied Table-Top Stand leaflet to
assemble the Table-Top Stand.
Inserting batteries
into the remote
control
1 Remove the protection sheet.
2 Push and slide the cover to open.
GB
6
Page 7
1: Attaching the
Guide
pins
Table-Top
Detaching the Table-Top
Stand from the TV
Stand
Refer to the supplied Table-Top Stand leaflet for
proper attachment.
1 Place the TV set on the Table-Top Stand.
2 Fix the TV to the Table-Top Stand using the
supplied screws. The arrow marks
indicate the location of the screw holes used
for securing the Table-Top Stand.
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 2.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
GB
~
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
GB
7
Page 8
2: Adjusting the
*15°
*15°
*15°
*15°
IR Sensor
Antenna (aerial) cable
(not supplied)
viewing angle
3: Connections
of the TV
This TV can be adjusted within the angles as
illustrated.
x Angle adjustment (Swivel)
~
• When adjusting the angle, hold the stand with
one hand to avoid having the stand slip or TV tip
over.
* The angle is approximate value.
~
• Ensure that there are no objects in front of the TV.
~
• Use an antenna (aerial) cable connector no
greater than 14 mm in thickness.
• Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
• For more information on connections, refer to the
i-Manual.
Connecting an antenna
(aerial)/cable/VCR
x To connect an antenna (aerial)/cable
8
GB
Page 9
x To connect a Set Top Box/recorder
Set Top Box/recorder (e.g. DVD recorder)
Antenna (aerial) cable
(not supplied)
HDMI cable
(not supplied)
Antenna (aerial)
cable (not
supplied)
Antenna (aerial)
cable (not
supplied)
AV cable
(not supplied)
VCR
(e.g. DVD recorder) with HDMI
x Connecting an antenna (aerial)/cable
and VCR
GB
(Continued)
GB
9
Page 10
Connecting audio/video
DVD recorder
Antenna (aerial)
cable (not
supplied)
AV cable
(not supplied)
Antenna (aerial)
cable (not
supplied)
Use authorized
MHL2 cable with
MHL logo
(not supplied)
MHL device
devices
Connecting MHL device
The MHL (Mobile High-Definition Link) enables
the TV to communicate with a connected
MHL-compatible device. The TV can charge the
connected MHL-compatible device while
playing photo/music/video from it. You can use
the TV remote control to control the connected
MHL-compatible device.
GB
10
~
• If “Auto Input Change (MHL)” is set to “On”, the
TV automatically switches to HDMI IN 2/MHL
from other input when MHL-compatible device is
connected to HDMI IN 2/MHL jack. The
availability of “Auto Input Change (MHL)”
depends on whether the MHL-compatible device
can support this feature.
• You can continue normal usage of the connected
MHL-compatible device (such as receiving calls)
depending on its capability.
• Some remote control functions may not be
available depending on features of the
connected MHL-compatible device. Please refer
to the device manual for details.
• If “MHL Charging during Standby” is set to “On”,
you can continue charging the MHL-compatible
device even when the TV is in standby mode.
• This product is officially MHL-certified for
operation with other MHL-certified devices. If you
encounter any problems when using the MHL
function, please consult the device manufacturer
for support.
Page 11
4: Preventing the
1
Soft cloth
6-8 mm
Screw M4
Cord
TV’s Table-Top
Stand
5: Bundling the
TV from
toppling over
cables
Before bundling the cables, remove the cable
holder from the AC cover. Reuse the cable
holder to bundle the other cables.
~
• Do not bundle the AC power cord (mains lead)
together with other cables.
12
*
3
* When installing on the wall, attach the cable holder
under the terminals.
4
GB
~
• Before install the machine screw, lay the display
face down on a stable work surface that is larger
than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
1 Install a machine screw (M4, not supplied)
into the screw hole of the TV and tie with a
strong cord (not supplied).
2 Install a wood screw (not supplied) in the TV
stand. Then, tie the strong cord to the wood
screw.
The length of the M4 machine screw differs
depending on the cord diameter.
Please see below illustration.
11
GB
Page 12
6: Connecting the
TV
Internet
Modem
with router
functions
Router
Modem
Internet
or
Wireless
router
Modem
Internet
TV
Preparing a wireless LAN
TV to the
Internet
When you connect this TV to the Internet, you
can enjoy multiple functions. For details on the
functions, refer to the i-Manual.
~
• You will need to contract with an Internet service
provider to connect to the Internet.
Preparing a wired network
The built-in wireless LAN device allows you to
access the Internet and your home network.
With this feature, you can connect to a wireless
LAN and enjoy the benefits of networking in a
cable-free environment. Before setting up the
wireless LAN function of the TV, be sure to set
up a wireless LAN router.
~
• For LAN connections, use a Category 7 cable
(not supplied).
GB
12
Page 13
7: Performing the
initial set-up
1 Connect the TV to your AC power outlet
(mains socket).
2 Press "/1 on the TV. The illumination LED
will light up in white.
When you switch on the TV for the first time,
the Language menu appears on the screen.
~
• When you turn on the TV for the first time, the
TV requires some internal processing for
optimisation before you can perform the
initial setup. There will be no picture and
sound, and the illumination LED on the front
of the TV blinks white for about 40 seconds.
Do not turn off the TV during this process.
This process has been completed at the
factory for some TVs.
• LED lights up in different colours according
to the status of the TV. If you do not wish to
light up the illumination LED, you can turn it
off later. Press HOME, then select “Settings”
t “System Settings” t “General Set-up” t
“Illumination LED” t “Off”. You can also
press OPTION, then select “Illumination
LED” t “Off”.
3 Press V/v/B/b to select an item, then press
.
Follow the instructions on the screen.
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1 Press V/v to select the channel you want
to move to a new position, then press .
2 Press V/v to select the new position for
the channel, then press .
~
• You can also tune channels manually.
Network Set-up: Sets up the Internet
settings. If you do not access the Internet, or
to set up later, select “Skip”. After you select
“Continue” or “Start” (depending on model)
at the Internet setup confirmation screen,
select “Auto” to connect to the network
automatically. Select “Custom” to connect
manually.
• If you use WEP security, select “Custom” t
“Wireless Set-up” t “Scan”. Then, select the
network name (SSID) you want to connect.
If you cannot find the required network name,
select “[Manual Entry]” and press
enter network name.
• To set “Network Set-up” later, press HOME,
then select “Settings” t “Network” t
“Network Set-up”.
• Use the optional USB Wireless LAN Adapter
to connect with your wireless router (or
access point) at 5GHz. Insert USB Wireless
LAN Adapter and set “Wi-Fi Direct” to “Off”.
Press HOME, then select “Settings” t
“Network” t “Wi-Fi Direct” t “Off”.
to
GB
13
GB
Page 14
Using Your BRAVIA TV
1
3
3
2
1
oror
Rear of TV
Watching TV
1Turn on the TV.
Press =/1 on the TV or remote control to turn on the
TV.
2Select a mode.
3Select a TV channel or select an
input.
x To select digital channels
Use 0-9. For channel numbers 10 and above, press the
next digit quickly.
~
• See below illustration for location of the CH+/-, 2+/-,
V/v/B/b, , and HOME buttons on the TV.
14
GB
Page 15
Watching 3D contents (KDL-55/47/42W800A only)
4
3
1
2
5
1Subtitle setting
You can turn subtitle on/off while watching digital
broadcasting.
2 AUDIO
You can select the sub sound or secondary
language while watching multiplex broadcasts.
3 Colour buttons
When the colour buttons are available, an
operation guide appears on the screen.
4 GUIDE
Displays the digital programme guide.
5/Info/Text reveal
Displays channel number, details of programmes,
and the clock.
This feature lets you experience powerful 3D entertainment, such as stereoscopic 3D games and 3D
Blu-ray Disc. Refer to the i-Manual on how to set the 3D settings or watch the 3D contents.
Frequently used buttons
GB
15
GB
Page 16
Selecting various functions and
1
OPTIONS
settings (Home Menu)
You can select the features of your TV from the Home menu.
Here is an example on how to select an item and modify
the TV settings.
1Press HOME.
2Press V/v to select “Settings”
category.
The contents of “Settings” are displayed horizontally.
2, 3
See page 17 (Category list) for all categories.
3Press B/b to select a desired setting
item, then press .
4Modify the settings.
x To exit the Home menu
Press HOME.
x To select using the OPTIONS button
Press OPTIONS.
A list of convenient functions and menu shortcuts are
displayed. The menu items vary based on the current
input and/or content.
16
GB
Page 17
Category list
Category
The categories are available depending on your TV model, region and country.
GB
Featured
History
TV
Applications
Connected Devices
Settings
Provides information on available applications and content.
If there is no network connection, or the “Featured Display” setting is set
to “Off”, the “Featured” category will not be displayed.
Displays recently viewed items.
Allows you to select a list of TV channels, or a programme guide.
Programme guide is available depending on your TV model or region.
A list of channels registered as favourites in the “TV” category are
displayed.
Launches applications that require an Internet connection, including
Media Player which does not require an Internet connection.
A list of applications registered as favourites in the “Applications”
category are displayed.
Enables selection of devices connected to the TV.
Provides settings (e.g. picture settings, sound settings, key tone setting)
that allow you to customise your TV.
17
GB
Page 18
Watching Internet Video
2, 3, 4
1
This feature serves as a gateway to Internet content, delivering a variety of on-demand entertainment
straight to your TV. You can enjoy video content, including movies and cartoons.
You will need to make a broadband Internet connection. For details, see page 12 (6: Connecting the TV
to the Internet).
1Press HOME.
2Press V/v to select “Applications”
category.
3Press B/b “All Applications”, then
press .
4Press V/v/B/b to select the desired
service, then press .
~
• If you experience difficulties with this feature, check that the Internet connection is set up properly.
• The interface to Internet content depends on the Internet content providers.
• Services block video content based on the “Parental Lock” setting of the TV. Some service providers do not
support this function.
• To update Internet Video content services, press HOME, then select “Settings” t “Network” t “Refresh
Internet Content”.
GB
18
Page 19
Looking for Instructions
1
2
RETURN
* If an arrow mark appears, press v repeatedly to
display more items.
Arrow mark*
Looking for instructions in the
electronic manual (i-Manual)
Operating instructions are built into your BRAVIA TV and can be displayed on the screen.
To learn more about your TV features, access your i-Manual with the touch of a button.
1Press i-MANUAL.
2Select an item.
1 Press B/b to select an item.
2 Press V/v/B/b to select an item, then press .
GB
The page of the selected item appears.
~
• You can step through pages using B/b.
Press RETURN to return to the previous page.
(Continued)
19
GB
Page 20
Saving frequently viewed
i-Manual screen previously displayed
BRAVIA TV screen
pages (Bookmark)
Displaying the page again
while operating the TV
You can save frequently viewed pages for easy
access anytime.
x To save a page
In the page to bookmark, press the yellow
button on the remote control.
x To access the bookmarked page
When displaying the i-Manual, press the green
button on the remote control to display the
bookmark list.
Press V/v to select the desired item, then press
.
You can switch between the i-Manual screen
and the TV screen. This feature allows you to
refer to the instructions in the i-Manual while
using your BRAVIA TV. Press i-MANUAL to
switch between the i-Manual screen previously
displayed and the TV screen.
~
• To return to the previous screen, press RETURN.
x To remove a bookmark
When the bookmarked page is displayed, press
the yellow button on the remote control.
GB
20
~
• To jump to the top page of i-Manual, press the
red button on the remote control. You can also
press HOME, then select “Settings” t
“i-Manual” to jump to the top page of i-Manual.
• Once you turn off the TV or the TV goes to
standby mode, the i-Manual will be displayed
from the top page when you select “i-Manual”.
Page 21
Additional Information
Troubleshooting
When the illumination LED is flashing in red, count how many times it flashes (interval
time is three seconds).
Press "/1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or
Sony service centre of how the indicator flashes (number of flashes).
When the illumination LED is not flashing, check the items in the tables as follows.
Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by
qualified service personnel.
ConditionExplanation/Solution
There is no picture (screen
is dark) and no sound.
Some programmes cannot
be tuned.
The remote control does not
function.
The “Parental Lock”
password has been
forgotten.
The TV surrounds become
warm.
Frozen audio or video, a
blank screen, or the TV
does not respond to TV or
remote control buttons.
• Check the antenna (aerial)/cable connection.
• Connect the TV to the AC power (mains), and press "/1 on
the TV or remote control.
• Check the antenna (aerial).
• Replace the batteries.
• Your TV may be in SYNC mode.
Press SYNC MENU, select “TV Control” and then select
“Home (Menu)” or “Options” to control the TV.
• Enter 9999 for the PIN code. (PIN code 9999 is always
accepted.)
• When the TV is used for an extended period, the TV surrounds
become warm.
You may feel hot when touching there by the hand.
• Perform a simple reset of the TV by unplugging the AC power
cord (mains lead) for two minutes, then plug it in again.
GB
21
GB
Page 22
Specifications
System
Panel system
TV system
Colour/video system
Channel coverage
Sound output
Input/Output jacks
Antenna (aerial)/cable
/ VIDEO IN 1
/ COMPONENT IN
VIDEO IN 2
HDMI IN1, 2, 3, 4
(KDL-55/47/42W800A)
HDMI 3 AUDIO IN
HDMI IN1, 2, 3, 4
(KDL-50/46W700A)
HDMI 3 AUDIO IN
MHL
(common with HDMI IN 2)
(KDL-55/47/42W800A)
MHL
(common with HDMI IN 2)
(KDL-50/46W700A)
DIGITAL AUDIO OUT
(OPTICAL)
AUDIO OUT/ i
1, 2, 3
(KDL-55/47/42W800A)
1, 2
(KDL-50/46W700A)
LAN
LCD (Liquid Crystal Display) Panel
Analogue: B/G, I, D/K, M, L
Digital:DTMB
Analogue: PAL, SECAM, NTSC3.58, NTSC4.43
Digital:Refer to the i-Manual
576i, 480p, 480i
Video (3D):
Side-by-Side 1080/24p, 1080i (50, 60Hz), 720p (50, 60Hz)
Over-Under 1080p (30Hz), 1080/24p, 1080i (50, 60Hz), 720p (50, 60Hz)
Audio: Two channel linear PCM: 32, 44.1 and 48kHz, 16, 20 and 24 bits, Dolby Digital
Video (2D):1080p (30Hz), 1080/24p, 1080i (50, 60Hz), 720p (30, 50, 60Hz),720/24p, 576p, 576i,
480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48kHz, 16, 20 and 24 bits, Dolby Digital
Digital optical jack (Two channel linear PCM, Dolby Digital)
Audio output (stereo minijack)
Headphones jack
USB port
USB port
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network,
connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication
quality are not guaranteed for this TV.)
480i
22
GB
Page 23
Others
Supplied accessories
Optional accessories
See “Checking the accessories” (page 6).
Wall-Mount Bracket: SU-WL400
USB Wireless LAN Adapter: UWA-BR100
One-touch Remote Control: RMF-ED003
Camera and Microphone Unit: CMU-BR200/CMU-BR100
Passive 3D Glasses: TDG-500P (KDL-55/47/42W800A only)
Optional accessories availability depends on countries/region/TV model/stock.
Design and specifications are subject to change without notice.
23
GB
Page 24
Installing the Accessories
Precautions
Soft cloth
(Wall-Mount Bracket)
x To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
x To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL400 (page 25) Wall-Mount Bracket (sold separately).
• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.
Sufficient expertise is required for installing this product, especially to determine the strength of the
wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to
Sony dealers or licensed contractors and pay adequate attention to safety during the installation.
Sony is not liable for any damage or injury caused by mishandling or improper installation.
Detach the Table-Top Stand from the TV. See “Detaching the Table-Top Stand from the TV” (page 7) for
details.
SU-WL400
When installing the TV on the wall, remove the screws from the rear of the TV. Be sure to store the
removed screws in a safe place, keeping them away from children.
×
2
~
• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is
larger than the TV.
• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.
GB
24
Page 25
SU-WL400
Screw (+PSW 6 x 50) G
Screw (+PSW 6 x 20) C
Pulley B
Spacer E
Band F
Soft cloth
×
4
~
• With the screen of the TV facing down, attach the SU-WL400 accessories. For more details of B, C, E, F
G, refer to Instruction Guide provided with Wall-Mount Bracket.
and
• Attach the Pulleys and Screws (+PSW6 x 20) to the upper rear of the TV.
• Attach the Band and Spacers with Screws (+PSW6 x 50) to the lower rear of the TV.
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Screw (+PSW 4 x 20)
Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
D, Bush (M4) H and Screw (+PSW 4 x 50) I will not be used depends on model.
GB
(Continued)
25
GB
Page 26
Hook locations diagram/table
b
c
a
Model Name KDL-
55W800A
50W700A
47W800A
46W700A
42W800A
x SU-WL400
Hook location
When installing the TV onto the Base Bracket.
Hook location
SU-WL400
a
26
GB
Page 27
TV installation dimensions table
e
a
c
d
b
Screen centre point
80
WARNING
SU-WL400
Model Name
KDL-
Display dimensions
Screen centre
dimension
GB
Unit: mm
Length for mounting
SU-WL400
55W800A
50W700A
47W800A
46W700A
42W800A
1253735150526116
1137669182526116
1083639198526116
1059626204526116
971577230526116
Figures in the table may differ slightly depending on the installation.
When your TV is installed on the wall, the upper side of the TV slightly leans forward.
The wall that the TV will be installed should be capable of supporting a weight of at least four times that of the
TV. See page 22-23 (Specifications) for its weight.
Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the
wall.
27
GB
Page 28
Additional Information
Mounting Hook
Hook attachment on
rear of TV set
Screw (supplied with
the Wall-Mount Bracket)
8mm - 12mm
30 cm
10 cm10 cm
10 cm
Leave at least this space around
the set.
30 cm
10 cm
10 cm
6 cm
Leave at least this space around
the set.
Air circulation is blocked.
WallWall
Safety
Information
WARNING
Batteries must not be exposed to
excessive heat such as sunshine, fire or
the like.
Installation/Set-up
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
Installation
• The TV set should be installed near an
easily accessible AC power outlet
(mains socket).
• Place the TV set on a stable, level
surface to avoid it from falling down
and cause personal injury or damage
to the TV.
• Only qualified service personnel
should carry out wall installations.
• For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
– Wall-Mount Bracket:
SU-WL400
• Be sure to use the screws supplied
with the Wall-Mount Bracket when
attaching the mounting hooks to the
TV set. The supplied screws are
designed as indicated by illustration
when measured from the attaching
surface of the mounting hook.
The diameter and length of the screws
differ depending on the Wall-Mount
Bracket model.
Use of screws other than those
supplied may result in internal
damage to the TV set or cause it to
fall, etc.
28
GB
Transporting
• Before transporting the TV set,
disconnect all cables.
• Two or three people are needed to
transport a large TV set.
• When transporting the TV set by hand,
hold it as shown below. Do not put
stress on the LCD panel and the frame
around the screen.
• When transporting the TV set, do not
subject it to jolts or excessive
vibration.
• When transporting the TV set for
repairs or when moving, pack it using
the original carton and packing
material.
Ventilation
• Never cover the ventilation holes or
insert anything in the cabinet.
• Leave space around the TV set as
shown below.
• It is strongly recommended that you
use a Sony wall-mount bracket in
order to provide adequate aircirculation.
Installed on the wall
Installed with stand
• To ensure proper ventilation and
prevent the collection of dirt or dust:
– Do not lay the TV set flat, install
upside down, backwards, or
sideways.
– Do not place the TV set on a shelf,
rug, bed or in a closet.
– Do not cover the TV set with a
cloth, such as curtains, or items
such as newspapers, etc.
– Do not install the TV set as shown
below.
AC power cord
(mains lead)
Handle the AC power cord (mains lead)
and outlet (mains socket) as follows in
order to avoid any risk of fire, electrical
shock or damage and/or injuries:
– Use only Sony supplied AC power
cords (mains lead), not those of
other brands.
– Insert the plug fully into the AC
power outlet (mains socket).
– Operate the TV set on a 220–240 V
AC supply only.
– When wiring cables, be sure to
unplug the AC power cord (mains
lead) for your safety and take care
not to catch your feet on the cables.
– Disconnect the AC power cord
(mains lead) from the AC power
outlet (mains socket) before working
on or moving the TV set.
– Keep the AC power cord (mains
lead) away from heat sources.
– Unplug the AC power plug and
clean it regularly. If the plug is
covered with dust and it picks up
moisture, its insulation may
deteriorate, which could result in a
fire.
Notes
• Do not use the supplied AC power
cord (mains lead) on any other
equipment.
• Do not pinch, bend, or twist the AC
power cord (mains lead) excessively.
The core conductors may be exposed
or broken.
• Do not modify the AC power cord
(mains lead).
• Do not put anything heavy on the AC
power cord (mains lead).
• Do not pull on the AC power cord
(mains lead) itself when disconnecting
the AC power cord (mains lead).
• Do not connect too many appliances
to the same AC power outlet (mains
socket).
• Do not use a poor fitting AC power
outlet (mains socket).
Page 29
Prohibited Usage
Do not install/use the TV set in
locations, environments or situations
such as those listed below, or the TV
set may malfunction and cause a fire,
electrical shock, damage and/or
injuries.
Location:
• Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel,
inside a vehicle, in medical
institutions, unstable locations, near
water, rain, moisture or smoke.
• If the TV is placed in the changing
room of a public bath or hot spring,
the TV may be damaged by airborne
sulfur, etc.
• For best picture quality, do not
expose the screen to direct
illumination or sunlight.
• Avoid moving the TV from a cold area
to a warm area. Sudden room
temperature changes may cause
moisture condensation. This may
cause the TV to show poor picture
and/or poor colour. Should this occur,
allow moisture to evaporate
completely before powering the TV
on.
• Never spray water or detergent
directly on the TV set. It may drip to
the bottom of the screen or exterior
parts and enter the TV set, and may
cause damage to the TV set.
Environment:
• Places that are hot, humid, or
excessively dusty; where insects may
enter; where it might be exposed to
mechanical vibration, near flammable
objects (candles, etc). The TV set
shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be
placed on the TV.
• Do not place the TV in a humid or
dusty space, or in a room with oily
smoke or steam (near cooking tables
or humidifiers). Fire, electric shock, or
warping may result.
• Do not install the TV in places subject
to extreme temperature, such as in
direct sunlight, near a radiator or a
heating vent. The TV may overheat in
such conditions which can cause
deformation of the enclosure and/or
TV malfunction.
Situation:
• Do not use when your hands are wet,
with the cabinet removed, or with
attachments not recommended by the
manufacturer. Disconnect the TV set
from AC power outlet (mains socket)
and antenna during lightning storms.
• Do not install the TV so that it sticks
out into an open space. Injury or
damage from a person or object
bumping into the TV may result.
Broken pieces:
• Do not throw anything at the TV set.
The screen glass may break by the
impact and cause serious injury.
• If the surface of the TV set cracks, do
not touch it until you have unplugged
the AC power cord (mains lead).
Otherwise electric shock may result.
When not in use
• If you will not be using the TV set for
several days, the TV set should be
disconnected from the AC power
(mains) for environmental and safety
reasons.
• As the TV set is not disconnected
from the AC power (mains) when the
TV set is just turned off, pull the plug
from the AC power outlet (mains
socket) to disconnect the TV set
completely.
• However, some TV sets may have
features that require the TV set to be
left in standby to work correctly.
For children
• Do not allow children to climb on the
TV set.
• Keep small accessories out of the
reach of children, so that they are not
mistakenly swallowed.
If the following problems
occur...
Turn off the TV set and unplug the AC
power cord (mains lead) immediately if
any of the following problems occur.
Ask your dealer or Sony service centre
to have it checked by qualified service
personnel.
When:
– AC power cord (mains lead) is
damaged.
– Poor fitting of AC power outlet
(mains socket).
– TV set is damaged by being
dropped, hit or having something
thrown at it.
– Any liquid or solid object falls
through openings in the cabinet.
About LCD Monitor
Temperature
When the LCD Monitor is used for an
extended period, the panel surrounds
become warm.
You may feel hot when touching there
by the hand.
Precautions
Viewing the TV
• Some people may experience
discomfort (such as eye strain,
fatigue, or nausea) while watching 3D
video images or playing stereoscopic
3D games. Sony recommends that all
viewers take regular breaks while
watching 3D video images or playing
stereoscopic 3D games. The length
and frequency of necessary breaks
will vary from person to person. You
must decide what works best. If you
experience any discomfort, you
should stop watching the 3D video
images or playing stereoscopic 3D
games until the discomfort ends;
consult a doctor if you believe
necessary. You should also review (i)
the instruction manual of any other
device or media used with this
television and (ii) our website (http://
www.sony-asia.com/support) for the
latest information. The vision of young
children (especially those under six
years old) is still under development.
Consult your doctor (such as a
pediatrician or eye doctor) before
allowing young children to watch 3D
video images or play stereoscopic 3D
games. Adults should supervise
young children to ensure they follow
the recommendations listed above.
• Do not use, store, or leave the 3D
Glasses or battery near a fire, or in
places with a high temperature, e.g.,
in direct sunlight, or in sun-heated
cars.
• When using the simulated 3D
function, please note that the
displayed image is modified from the
original due to the conversion done
by this television.
• View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your eyes.
• When using headphones, adjust the
volume so as to avoid excessive
levels, as hearing damage may result.
LCD Screen
• Although the LCD screen is made
with high-precision technology and
99.99% or more of the pixels are
effective, black dots may appear or
bright points of light (red, blue, or
green) may appear constantly on the
LCD screen. This is a structural
property of the LCD screen and is not
a malfunction.
• Do not push or scratch the front filter,
or place objects on top of this TV set.
The image may be uneven or the LCD
screen may be damaged.
GB
(Continued)
29
GB
Page 30
• If this TV set is used in a cold place, a
smear may occur in the picture or the
picture may become dark. This does
not indicate a failure. These
phenomena disappear as the
temperature rises.
• Ghosting may occur when still
pictures are displayed continuously. It
may disappear after a few moments.
• The screen and cabinet get warm
when this TV set is in use. This is not a
malfunction.
• The LCD screen contains a small
amount of liquid crystal. Follow your
local ordinances and regulations for
disposal.
Handling and cleaning the
screen surface/cabinet of
the TV set
Be sure to unplug the AC power cord
(mains lead) connected to the TV set
from AC power outlet (mains socket)
before cleaning.
To avoid material degradation or screen
coating degradation, observe the
following precautions.
• To remove dust from the screen
surface/cabinet, wipe gently with a
soft cloth. If dust is persistent, wipe
with a soft cloth slightly moistened
with a diluted mild detergent solution.
• Never spray water or detergent
directly on the TV set. It may drip to
the bottom of the screen or exterior
parts and enter the TV set, and may
cause damage to the TV set.
Optional Equipment
Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set.
Otherwise picture distortion and/or noisy
sound may occur.
Wireless Function of the
unit
• Do not operate this unit near medical
equipment (pacemaker, etc.), as
malfunction of the medical equipment
may result.
• Although this unit transmits/receives
scrambled signals, be careful of
unauthorised interception. We cannot
be responsible for any trouble as a
result.
(Caution about handling
the remote control)
Notes
• Observe the correct polarity when
inserting batteries.
• Do not use different types of batteries
together or mix old and new batteries.
• Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
• Handle the remote control with care.
Do not drop or step on it, or spill liquid
of any kind onto it.
• Do not place the remote control in a
location near a heat source, a place
subject to direct sunlight, or a damp
room.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring
powder, or volatile solvent, such as
alcohol, benzene, thinner or
insecticide. Using such materials or
maintaining prolonged contact with
rubber or vinyl materials may result in
damage to the screen surface and
cabinet material.
• Periodic vacuuming of the ventilation
openings is recommended to ensure
to proper ventilation.
• When adjusting the angle of the TV
set, move it slowly so as to prevent the
TV set from moving or slipping off from
its table stand.