Sony KDL-40NX700, KDL-40NX710, KDL-40NX711, KDL-46NX700, KDL-46NX710 Setup Guide

...

4-178-676-42(1)

LCD Digital Color TV

Setup Guide (Operating Instructions)

Setting up your TV

To watch TV

Additional Information

Sony Customer Support

U.S.A.: www.sony.com/tvsupport Canada: www.sony.ca/support

United States Canada

1.800.222.SONY 1.877.899.SONY

Please Do Not Return the Product to the Store

KDL-60NX810 / 60NX801 / 60NX800 / 55NX811 / 55NX810 / 52NX800 / 46NX810 KDL-46NX800 / 46NX711 / 46NX710 / 46NX700 / 40NX711 / 40NX710 / 40NX700

Owner’s Record

The information label are located on the rear of t he TV. For KDL–NX801/ 800 series models, they can be found by removing the bottom cover. Record model name and serial numbers on the information label in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV.

Model Name

Serial No.

CAUTION

To prevent electric shock and blade exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted.

•

Operate the TV only on 110-240 V AC (U.S.A./Canada 120 V AC)

• Avoid operating the TV at

temperatures below 41°F (5°C).

•

Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images or playing stereoscopic 3D games until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual of any other device or media used with this television and (ii) our website (www.sony.com/tvsupport) for the latest information. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video

images or play stereoscopic 3D games. Adults should supervise young children to ensure they follow the recommendations listed above.

• Do not use, store, or leave the 3D

Glasses or the battery near fire, or in places with a high temperature, e.g., in direct sunlight, or in sun-heated cars.

• When using the simulated 3D

function, please note that the displayed image is modified from the original due to the conversion done by this television.

Licensing Information

Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries.

HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Fergason Patent Properties, LLC: U.S. Patent No. 5,717,422 U.S. Patent No. 6,816,141

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

In the United States, TV Guide and TV Guide On Screen are registered trademarks of TV Guide Entertainment Group, Inc. and/or its subsidiaries or affiliates, and are used under a license by Gemstar-TV Guide International, Inc. and/or its subsidiaries. In Canada, TV Guide is a registered mark of Transcontinental Inc., and is used under a license by Gemstar-TV Guide International, Inc. and/or its subsidiaries.

The TV Guide On Screen system is manufactured under license from Gemstar-TV Guide International, Inc. and/or its subsidiaries.

Gemstar-TV Guide International, Inc. and/or its related affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the TV Guide On Screen system and cannot guarantee service availability in your area. In no event shall Gemstar-TV Guide International, Inc. and/or its related affiliates be liable for any damages in connection with the accuracy or availability of the program schedule information or other data in the TV Guide On Screen system.

Blu-ray Disc is a trademark.

“BRAVIA” and , S-Force, Motionflow, BRAVIA Sync, and are trademarks or registered marks of Sony Corporation.

“XMB” and “xross media bar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

“PlayStation” is a registered trademark and “PS3” is a trademark of Sony Computer Entertainment Inc.

, the DLNA Logo and DLNA

DLNA CERTIFIED marks, or certification marks of the Digital Living Network Alliance.

Your BRAVIA TV is ENERGY STAR® qualified in the “Home” mode. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices.

Changes to certain features, settings, and functionalities of this T V (i.e. TV Guide, Picture/Sound, Light Sensor, Power Savings) can increase or change the power consumption.

Depending upon such changed settings, the power consumption may exceed the limits required for the ENERGY STAR qualification in the “Home” mode.

are trademarks, service

The 55 class has a 54.6 inch viewable image size (measured diagonally).

• The illustrations of the remote

control used in this manual are of the RM-YD036 unless otherwise stated.

• The illustrations used in this

manual may differ depending on your TV model.

Table of Contents

Checking the accessories ................................................................................................4

Inserting batteries into the remote control........................................................................4

Setting up your TV

Attaching the Table-Top Stand ........................................................................................6

Connecting the TV ...........................................................................................................9

Securing the TV .............................................................................................................13

Organizing the AC power cord.......................................................................................14

Running initial setup.......................................................................................................15

Detaching the Table-Top Stand from the TV .................................................................15

Using a Wall-Mount Bracket ..........................................................................................16

Installing the TV Against a Wall or Enclosed Area.........................................................16

To watch TV

To watch programs ........................................................................................................17

To use the TV features ..................................................................................................17

To use i-Manual .............................................................................................................18

Additional Information

Troubleshooting.............................................................................................................19

Specifications.................................................................................................................21

• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for

operation (page 18).

• Retain this manual for future reference.

The BRAVIA® Full HDTV Experience

Thank you for choosing Sony! Your new

BRAVIA Experience.” This document will help you get the most out of your TV.

Please take a moment to register your TV at:

Four Steps to a Full HD Experience

Set, Source, Sound, and Setup.

TV opens the door to the “Full HDTV

U.S.A.: http://productregistration.sony.com Canada: http://www.SonyStyle.ca/registration

1 Set

Now that you have made the best selection in LCD TV technology, be sure to remove all accessory contents from the packaging before setting up your TV.

2 Source

To experience the stunning detail of your BRAVIA TV, you need access to HD programming.

• Upgrade your signal or content source to highdefinition (HD) by contacting your HD service provider.

This TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines.

• Receive over-the-air HD broadcasts with an HD-quality antenna connected directly to the back of your TV.

Visit www.antennaweb.org for more information on antenna selection and setup.

• Discover the wealth of entertainment now available on super-high resolution Blu-ray Disc™ player and other Sony HD equipment.

3 Sound

Complete the high-definition experience with a BRAVIA Sync™ surround sound system or A/V receiver from Sony.

4 Setup

Install your TV and connect your sources. See page 9 for sample connection diagrams.

To help assure the highest quality for your HD experience, use Sony HDMI (High-Definition Multimedia Interface) cables.

To learn more about HDTV, visit:

U.S.A.: http://www.sony.com/HDTV Canada: http://www.SonyStyle.ca/hd

Checking the accessories

For all models

Table-Top Stand (1) Remote control (1)

Size AAA batteries (2)

For KDL-60NX801, KDL-60/52/46NX800 and KDL-46/40NX700 models

AC power cord (1) Bottom Cover (1)

and KDL-60/52/46NX800 only)

Stand Rear Cover (1) Fixing screws for Table-Top Stand (M5 × 16) (4) Assembling Screws for Table-Top Stand (M5 × 16) (4) Black Spacers (4)*4

(KDL-52/46NX800 only)

Silver Spacers (4)

and KDL-60NX800 only)

Screws (M6 × 20) (4)*4

(KDL-60NX801 and KDL-60NX800 only)

For KDL-55NX811, KDL-60/55/ 46NX810, KDL-46/40NX711 and KDL-46/40NX710 models

Hexagon wrench (1) Assembling screws for Table-Top Stand (4)

(KDL-55NX811, KDL-60/55/46NX810, KDL-46NX711 and KDL-46NX710 only)

Assembling screws for Table-Top Stand (2)

(KDL-40NX711, KDL-40NX710 only)

3D Glasses (battery included) (2)

(KDL-55NX811 and KDL-46/40NX711 only)

Pouch for 3D Glasses (2)

(KDL-55NX811 and KDL-46/40NX711 only)

3D Sync Transmitter (1)

(KDL-55NX811 and KDL-46/40NX711 only)

Double-sided tape (2)

(KDL-55NX811and KDL-46/40NX711 only)

*1 KDL-60NX801/60NX800 models are

shipped with the parts attached to the TV. KDL-55NX811, KDL-60/55/46NX810, KDL-46/40NX711, KDL-46/40NX710 and KDL-40NX700 models requires assembling. Refer to other leaflet to assemble the TableTop Stand.

*2 Please refer to the model name printed on the

remote control.

(KDL-60NX801

(KDL-40NX700 only)

(KDL-60NX801

*3 KDL-60NX801/60NX800 models are

shipped with the parts attached to the TV.

*4 These screws and spacers are required when

installing an optional Wall-Mount Bracket. You must use these screws instead of the ones provided with the bracket for safety reasons. Be sure to keep them in a safe place until you are ready to use the Wall-Mount Bracket. See page 23 for the recommended Wall-Mount Bracket for your TV.

Inserting batteries into the remote control

1 Remove the protection sheet. 2 Push and slide the cover upward.

Guidelines for Remote Control

• Point your remote control directly at the IR sensor located on your TV.

• Make sure that no objects are blocking the path between the remote control and the IR sensor on your TV.

• Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps.

• If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted.

Programming the Remote Control

Your remote control can be programmed to use other equipment and is pre-programmed to operate the following Sony equipment.

Function Button Sony Equipment Code Number

DVD DVD Player 31033

AMP Receiver 52172

STB Digital Satellite 01639

Programming Other Equipment

2 2

Confirm the Programming

If you can turn your equipment on and off using the green POWER button, the programming is complete. If not, try the next code listed.

Follow the steps below to program your TV remote control. 1 Look for the code in the Manufacturer’s Code List (refer to

i-Manual) that corresponds to the equipment you would like to operate with the Sony remote control. If more than one code is provided, try programming the first code listed. If your equipment’s code is not listed, visit http://esupport.sony.com/remotecodes list.

2 Press and hold a DVD, AMP or STB function button

simultaneously with INPUT button and release.

When in the programming mode, the function button (DVD, AMP, STB) blinks for approximately 30 seconds until a code is

entered.

3 Enter the five digit code using - while the function

buttons (DVD, AMP, STB) are lit. If the code is not entered within 30 seconds, you must repeat step 2.

4 Press or ENT to confirm the code. If successfully

programmed, the function button (DVD, AMP, STB) will blink twice, if not, it blinks five times.

for a more comprehensive

• In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s own remote control.

• Any of the function buttons (DVD, AMP, STB) can be programmed to operate other equipment regardless of the labeling. For example, if programmed with the correct code, a Blu-ray Disc player can be operated with the DVD button. This is useful if your equipment does not match any of the labeled buttons.

To reset the remote control to the factory default:

Press SCENE, TV POWER, and simultaneously. The four function buttons (DVD, AMP, STB, and TV) blink when successfully reset.

Setting up your TV

Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. You will need a Phillips screwdriver and the supplied screws to complete the task. Look for the attachment instructions provided with the TV. Be sure to consider the following while setting up your TV:

• Disconnect all cables when carrying the TV.

• Carry the TV with the adequate number of people; larger size TVs require two or more people.

• Correct hand placement while carrying the TV is very important for safety and to avoid damage.

Attaching the Table-Top Stand

Refer to the supplied Table-Top Stand instruction leaflet for proper attachment for some TV models.

• Do not put stress on the LCD panel or the

• Be careful to not pinch your hands or the AC

For KDL-52/46NX800 and KDL-46/ 40NX700

1 Gently slide the TV unit onto the

frame around the screen.

power cord when you install the TV unit to the Table-Top Stand.

Table-Top Stand and align the screw holes.

• Ensure your TV has adequate ventilation, see page 16.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid installing the TV in a room with reflective wall and floor materials.

• If the TV is brought directly from a cold to a warm location, or is placed in a very damp room, or is placed in a room in which heating has just been turned on, moisture may condense on the surface or inside the TV. Should this occur, turn off the TV and leave the TV off until the moisture evaporates, and then the TV can be used. If you notice moisture condensation between the glass panel and the LCD, turn on the TV and the condensation will evaporate after the TV has warmed up.

2 Use the supplied screws to attach the

TV unit to the Table-Top Stand.

• If you use an electric screwdriver, set the

tightening torque at approximately 1.5 N·m {15 kgf·cm}.

3 After all the screws are tighten cover

the Table-Top Stand with the supplied Stand Rear Cover.

For KDL-55NX811, KDL-60/55/ 46NX810, KDL-46/40NX711 and KDL-46/40NX710

1 Align with the two dowels of the

Table-Top Stand, and gently place the TV, checking the f mark is facing the front.

2 Attach the TV and Table-Top Stand

with the supplied screw and hexagon wrench.

Setting up your TV

• Set the torque setting to approximately 3 N·m

{30 kgf·cm}.

Reattaching the Table-Top Stand to the TV

Attach to the original position using the removed screws. See “Detaching the TableTop Stand from the TV” (page 15).

(Continued)

Adjusting the viewing angle (except 60-inch models)

This TV can be adjusted within the angles shown below.

For KDL-52/46NX800 and KDL-46/40NX700

0°

Remove screw as shown.

• Reverse the steps when readjusting the angle back to 0 degree.

Lift up and tilt.

Slide in.

6°

Install screw into the top screw hole of the Table-Top Stand.

For KDL-55NX811, KDL-55/46NX810, KDL-46/40NX711 and KDL-46/ 40NX710

0° 6°

+ 16 hidden pages