SONY KDL-40HX803, KDL-46HX803 User Manual

4-180-175-11(1)
LCD Digital Colour TV
Operating Instructions
Setting Up
Watching TV
Additional Information
KDL-52HX903 / 46HX903 / 46HX803 / 40HX803
NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug s upplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
FUSE
FUSE
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product.
Introduction
Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
GB
Notes on Digital TV function
Any functions related to Digital TV
( ) will only work in countries or areas where DVB-T (MPEG-2 and H.264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG­2 and H.264/MPEG-4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV.
Your cable provider may charge a fee for
their services, or require you to agree to its terms and conditions of business.
This TV set complies with DVB-T and
DVB-C specifications, but compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts are not guaranteed.
Some Digital TV functions may not be
available in some countries/areas and DVB-C cable may not operate correctly with some providers.
For a list of compatible cable providers, refer to the support web site:
http://support.sony-europe.com/TV/ DVBC/
~
Instructions about “Installing Wall
Mount Bracket” are included within this TV’s instructions manual.
The illustrations of the remote used in
this manual are of the RM-ED034 unless otherwise stated.
The illustrations used in this manu al may
differ depending on your TV model.
Trademark information
is a registered trademark of the DVB
Project.
HDMI, the HDMI Logo, and High­Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
DivX® is a video file compression technology, developed by DivX, Inc.
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on­Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
“BRAVIA” and are trademarks of Sony Corporation.
” and “XrossMediaBar” are
“XMB
trademarks of Sony Corporation and Sony Computer Entertainment Inc.
Location of the identification label
Labels for Model No. and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV.
Table of Contents
Checking the accessories ..............................................................................................................3
Inserting batteries into the remote .................................................................................................3
Setting Up
Attaching the Table-Top Stand ......................................................................................................4
Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)..................................5
Preventing the TV from toppling over ............................................................................................5
Bundling the cables........................................................................................................................6
Performing the initial set-up ...........................................................................................................6
Detaching the Table-Top Stand from the TV .................................................................................7
Watching TV
To watch programmes ...................................................................................................................8
To utilise the TV’s features ............................................................................................................8
To use i-Manual .............................................................................................................................9
Additional Information
Troubleshooting...........................................................................................................................10
Specifications...............................................................................................................................11
Installing the Accessories (Wall-Mount Bracket)..........................................................................13
Safety Information........................................................................................................................16
Precautions..................................................................................................................................17
Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 9).
Before operating the TV, please read “Safety Information” (page 16). Retain this manual for future reference.

Checking the accessories

AC power cord (mains lead) (1) Cable holder (1) Remote (1) Size AAA batteries (R3 type) (2) Table-Top Stand (1)* Fixing screws for Table-Top Stand (M5 × 16) (4) Assembling screws for Table-Top Stand (M5 × 16) (4)
(KDL-40HX803 only) Stand rear cover (1)*
*1For KDL-40HX803, assemble the Table-Top
Stand with the supplied assembling screws. Refer to the supplied Table-Top Stand leaflet to assemble the stand.
2
For KDL-46HX803, the stand rear cover is
*
factory-attached to the Table-Top Stand.
1
2

Inserting batteries into the remote

1 Remove the protection sheet. 2 Push and slide the cover upward.
GB

Setting Up

Attaching the Table-Top Stand

1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some TV models.
2 Place the TV set on the Table-Top
Stand.
3 Fix the TV to the Table-Top Stand
according to the arrow marks that guide the screw holes using the supplied screws.
Adjusting the viewing angle of the TV (KDL-52/46HX903 only)
This TV can be adjusted within the angles shown below.
1
4
~
If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
4 For KDL-52/46HX903 and KDL-
40HX803, after all the screws are tightened, attach the supplied stand rear cover to the Table-Top Stand.
Remove screw as shown.
2
~
To return to 0°, reverse the above procedure.
Install screw into the top screw hole of the Table-Top Stand.
3
Slide in.Lift up and tilt.
GB

Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder)

Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART

Preventing the TV from toppling over

Setting Up
Set Top Box/recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI
Set Top Box/recorder (e.g. DVD recorder)
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
2 Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
GB

Bundling the cables

Performing the initial set-up

1 Connect the TV to your AC power
outlet (mains socket).
2 Check the ENERGY SAVING
SWITCH setting is on (
z).
3 Press 1 on the TV.
When you switch on the TV for the first time, the Language menu appears on the screen.
~
Do not bundle the AC power cord (mains lead)
together with other cables.
4
Follow the instructions on the screen.
Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time).
For a list of compatible cable providers, refer to the support web site: http://support.sony-europe.com/TV/ DVBC/
GB
Loading...
+ 14 hidden pages