Sony KDL-40HX800, KDL-46HX800, KDL-46HX909, KDL-52HX909, KDL-55HX800 Operating Instruction

4-180-193-11(1)

LCD
Digital Color TV

Setup Guide (Operating Instructions)

Setting up your TV

To watch TV

Additional Information

KDL-55HX800 / 46HX800 / 40HX800
XBR-52HX909 / 46HX909

Sony Customer Support

U.S.A.: www.sony.com/tvsupport
Canada: www.sony.ca/support

United States Canada

1.800.222.SONY 1.877.899.SONY

Please Do Not Return
the Product to the Store

Owner’s Record

The information label are located on the
rear of the TV. Record model name and
serial numbers on the information label
in the spaces provided below. Refer to
them whenever you call upon your
Sony dealer regarding this TV.

Model Name

Serial No.

CAUTION

To prevent electr ic shock and blade exposure,
do not use this polarized AC plug with an
extension cord, receptacle or other outlet
unless the blades can be fully inserted.

• Operate the TV only on 110-240 V

AC (U.S.A./Canada 120 V AC)

• Avoid operating the TV at

temperatures below 41°F (5°C).

• Some people may experience

discomfort (such as eye strain,
fatigue, or nausea) while watching
3D video images or playing 3D
video games. Sony recommends that
all viewers take regular breaks while
watching 3D video images or
playing 3D video games. The length
and frequency of necessary breaks
will vary from person to person. You
must decide what works best. If you
experience any discomfort, you
should stop watching the 3D video
images or playing 3D video games
until the discomfort ends; consult a
doctor if you believe necessary. You
should also review (i) the instruction
manual of any other device or media
used with this television and (ii) our
website (www.sony.com/tvsupport)
for the latest information. The vision
of young children (especially those
under six years old) is still under
development. Consult your doctor
(such as a pediatrician or eye doctor)
before allowing young children to
watch 3D video images or play 3D
video games. Adults should
supervise young children to ensure
they follow the recommendations
listed above.

• When using the simulated 3D

function, please note that the
displayed image is modified from
the original due to the conversion
done by this television.

Licensing Information

Macintosh is a trademark of Apple Inc.,
registered in the U.S. and other countries.

HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other countries.

Fergason Patent Properties, LLC:
U.S. Patent No. 5,717,422
U.S. Patent No. 6,816,141

Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.

In the United States, TV Guide and TV Guide
On Screen are registered trademarks of TV
Guide Entertainment Group, Inc. and/or its
subsidiaries or affiliates, and are us ed under a
license by Gemstar-TV Guide International,
Inc. and/or its subsidiaries. In Canada, TV
Guide is a registered mark of
Transcontinental Inc., and is used under a
license by Gemstar-TV Guide International,
Inc. and/or its subsidiaries.

The TV Guide On Screen system is
manufactured under license from Gemstar­TV Guide International, Inc. and/or its
subsidiaries.

The TV Guide On Screen system is protected
by one or more of the following United States
patents 6,498,895; 6,850,693; 6,396,546;
5,940,073; 6,239,794 to Gemstar-TV Guide
International, Inc. and/or its subsidiaries.

Gemstar-TV Guide International, Inc. and/or
its related affiliates are not in any way liable
for the accuracy or availability of the program
schedule information or other data in the TV
Guide On Screen system and cannot
guarantee service availability in your area. In
no event shall Gemstar-TV Guide
International, Inc. and/or its related affiliates
be liable for any damages in connection with
the accuracy or availability of the program
schedule information or other data in the TV
Guide On Screen system.

Blu-ray Disc is a trademark.

“BRAVIA” and , S-Force,
Motionflow, BRAVIA Sync, and are
trademarks or registered marks of Sony
Corporation.

”and “xross media bar” are

“XMB

™

trademarks of Sony Corporation and Sony
Computer Entertainment Inc.

“PlayStation” is a registered trademark and
“PS3” is a trademark of Sony Computer
Entertainment Inc.

®

, the DLNA Logo and DLNA

DLNA
CERTIFIED
or certification marks of the Digital Living
Network Alliance.

®

are trademarks, service mar ks,

Your BRAVIA TV is
ENERGY STAR
in the “Home” mode.
It meets strict energy
efficiency guidelines set by
the U.S. Environmental
Protection Agency and
Department of Energy. ENERGY STAR is a
joint program of these government agencies,
designed to promote energy efficient products
and practices.

Changes to certain feature s, settings, and
functionalities of this TV (i.e. TV Guide,
Picture/Sound, Light Sensor, Power Savings)
can increase or change the power
consumption.

Depending upon such changed s ettings, the
power consumption may exceed the limits
required for the ENERGY STAR
qualification in the “Home” mode.

The 55 class has a 54.6 inch viewable
image size (measured diagonally).

®

qualified

~

• The illustrations of the remote

control used in this manual are of the
RM-YD040 unless otherwise stated.

• The illustrations used in this manual

may differ depending on your TV
model.

2

Table of Contents

Checking the accessories..............................................................................................................4

Inserting batteries into the remote control .....................................................................................4

Setting up your TV

Attaching the Table-Top Stand......................................................................................................6

Connecting the TV.........................................................................................................................8

Securing the TV...........................................................................................................................12

Organizing the AC power cord ....................................................................................................13

Running initial setup....................................................................................................................14

Detaching the Table-Top Stand from the TV...............................................................................14

Using a Wall-Mount Bracket........................................................................................................15

Installing the TV Against a Wall or Enclosed Area......................................................................15

To watch TV

To watch programs......................................................................................................................16

To use the TV features................................................................................................................16

To use i-Manual...........................................................................................................................17

Additional Information

Troubleshooting...........................................................................................................................18

Specifications ..............................................................................................................................20

•

Operating instructions are built into your

• Retain this manual for future reference.

BRAVIA

TV. Refer to “To use i-Manual” for operation (page 17).

The BRAVIA® Full HDTV Experience

Thank you for choosing Sony! Your new BRAVIA® TV
opens the door to the “Full HDTV Experience.” This
document will help you get the most out of your TV.

Please take a moment to register your TV at:

U.S.A.: http://productregistration.sony.com
Canada: http://www.SonyStyle.ca/registration

Four Steps to a Full HD Experience

Set, Source, Sound, and Setup.

1 Set

Now that you have made the best selection in LCD TV
technology, be sure to remove all accessory contents
from the packaging before setting up your TV.

2 Source

To experience the stunning detail of your BRAVIA TV,
you need access to HD programming.

• Upgrade your signal or content source to high­definition (HD) by contacting your HD service
provider.

This TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines.

• Receive over-the-air HD broadcasts with an HD­quality antenna connected directly to the back of your
TV.

Visit www.antennaweb.org for more
information on antenna selection and setup.

• Discover the wealth of entertainment now available
on super-high resolution Blu-ray Disc™ player and
other Sony HD equipment.

3 Sound

Complete the high-definition experience with a
BRAVIA Sync™ surround sound system or A/V
receiver from Sony.

4 Setup

Install your TV and connect your sources. See page 8 for
sample connection diagrams.

To help assure the highest quality for your HD experience,
use Sony HDMI (High-Definition Multimedia Interface)
cables.

To learn more about HDTV, visit:

U.S.A.: http://www.sony.com/HDTV
Canada: http://www.SonyStyle.ca/hd

3

Checking the accessories

AC power cord (1)
Remote control (1)*
Size AAA batteries (2)
Table-Top Stand (1)*
Fixing screws for Table-Top Stand
(M5 × 16) (4)
Assembling screws for Table-Top Stand
(M5 × 16) (4)
Stand rear cover (1)

*1 Please refer to the model name printed on the

remote control.

*2 KDL-40HX800 requires assembling.

Refer to other leaflet to assemble the Table-Top
Stand.

*3 For KDL-55/46HX800, the stand rear cover is

factory-attached to the Table-Top Stand.

(KDL-40HX800 only)

1

2

3

*

Inserting batteries into the remote control

Guidelines for Remote Control

• Point your remote control directly at the IR
sensor located on your TV.

• Make sure that no objects are blocking the
path between the remote control and the IR
sensor on your TV.

• Fluorescent lamps can interfere with your
remote control; try turning off the fluorescent
lamps.

• If you are having problems with the remote
control, reinsert or replace your batteries and
make sure that they are correctly inserted.

1 Remove the protection sheet.
2 Push and slide the cover upward.

4

Programming the Remote Control
(For RM-ED038 and RM-ED053 remote control users)

Your remote control can be programmed to use other equipment and is pre-programmed to operate
the following Sony equipment.

Function Button Sony Equipment Code Number

DVD DVD Player 31033

AMP Receiver 52172

STB Digital Satellite 01639

Programming Other Equipment

2
2

4

3

~

• Button names may

differ slightly
depending on the
remote control.

Confirm the Programming

If you can turn your equipment on and off using the green POWER button, the programming is
complete. If not, try the next code listed.

Follow the steps below to program your TV remote control.
1 Look for the code in the Manufacturer’s Code List (refer to i-Manual) that

corresponds to the equipment you would like to operate with the Sony
remote control. If more than one code is provided, try programming the
first code listed. If your equipment’s code is not listed, visit
http://esupport.sony.com/remotecodes

2 Press and hold a DVD, AMP or STB function button simultaneously with

INPUT button and release.

When in the programming mode, the function button (DVD, AMP, STB)
blinks for approximately 30 seconds until a code is entered.

3 Enter the five digit code using - while the function buttons

4

(DVD, AMP, STB) are lit. If the code is not entered within 30 seconds,
you must repeat step 2.

4 Press or ENT to confirm the code. If successfully programmed, the

function button (DVD, AMP, STB) will blink twice, if not, it blinks five
times.

for a more comprehensive list.

~

• In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s
own remote control.

• Any of the function buttons (DVD, AMP, STB) can be programmed to operate other equipment regardless of
the labeling. For example, if programmed with the correct code, a Blu-ray Disc player can be operated with
the DVD button. This is useful if your equipment does not match any of the labeled buttons.

To reset the remote control to the factory default:

Press SCENE, TV POWER, and simultaneously. The four function buttons (DVD, AMP, STB,
and TV) blink when successfully reset.

5

Setting up your TV

Some TV models are packaged with a detached
Table-Top Stand so you can mount your TV to
a wall right away. If you are not mounting the
TV to a wall, you will need to attach the
Table-Top Stand. You will need a Phillips
screwdriver and the supplied screws to
complete the task. Look for the supplied Table­Top Stand instruction leaflet.
Be sure to consider the following while setting
up your TV:

• Disconnect all cables when carrying the
TV.

• Carry the TV with the adequate number of
people; larger size TVs require two or more
people.

• Correct hand placement while carrying the
TV is very important for safety and to avoid
damage.

Attaching the Table-Top Stand

Refer to the supplied Table-Top Stand
instruction leaflet for proper attachment for
some TV models.

1 Gently slide the TV unit onto the

Table-Top Stand and align the screw
holes.

~

• Do not put stress on the LCD panel or the frame

around the screen.

• Be careful to not pinch your hands or the AC

power cord when you install the TV unit to the
Table-Top Stand.

For XBR-52/46HX909 For KDL-55/46/40HX800

• Ensure your TV has adequate ventilation,
see page 15.

• For best picture quality, do not expose the
screen to direct illumination or sunlight.

• Avoid installing the TV in a room with
reflective wall and floor materials.

• Avoid moving the TV from a cold area to a
warm area. Sudden room temperature
changes may cause moisture condensation.
This may cause the TV to show poor picture
and/or poor color. Should this occur, allow
moisture to evaporate completely before
powering the TV on.

2 Use the supplied screws to attach the

TV unit to the Table-Top Stand.

~

• If you use an electric screwdriver, set the

tightening torque at approximately 1.5 N·m
{15 kgf·cm}.

3 For XBR-52/46HX909 and

KDL-40HX800, after all the screws are
tighten cover the Table-Top Stand with
the supplied stand rear cover.

~

• You can attach the TV to the Table-Top Stand

with the stand rear cover on with the exception of
XBR-52/46HX909 and KDL-40HX800. XBR-52/
46HX909 and KDL-40HX800 must follow the
above instructions.

6

Adjusting the viewing angle (XBR-52/46HX909 only)

This TV can be adjusted within the angles shown below.

1

Remove screw as
shown.

0°

6°

Setting up your TV

2

3

4

Install screw into the
top screw hole of the
Table-Top Stand.

Lift up and tilt.

~

• Reverse the steps when readjusting the angle back to 0 degrees.

Slide in.

7

Connecting the TV

The following chart shows the high-definition (HD) and standard-definition (SD) video formats
supported by your BRAVIA TV inputs.

* For supported PC formats refer to the i-Manual.

Recommendation of the F type plug

Projection of the inner wire from the
connection part must be less than 1.5 mm.

1.5 mm

8

Shown with a Set Top Box with HDMI
connection

Shown with a Set Top Box with
COMPONENT connection

Setting up your TV

Set Top Box

Cable System or VHF/UHF Antenna System

Set Top Box

Cable
or
Antenna

(Continued)

9

Shown with HD BRAVIA® Sync™ Basic Connection

*Rear of TV

SAT

HD Cable Box or

(Dish)

HD Satellite Receiver

*A/V Receiver

Cable/
Antenna

*Blu-ray Disc

* Signifies a BRAVIA Sync capable device.

Shown with HD Basic Connection with Home Theater System

Rear of TV

Cable/
Antenna

Cable/SAT
(Dish)

SD Cable Box or
SD Satellite Receiver

Home Theater System

or

Blu-ray Disc/DVD

10

Shown with PC Connection with SD VCR/DVD

Rear of TV Notebook PC

or

Setting up your TV

Splitter

Cable/Antenna

PC

DVDVCR

VCR/DVD Combo

11

Securing the TV

Sony strongly recommends
taking measures to prevent the
TV from toppling over.
Unsecured TVs may topple and
result in property damage,
serious bodily injury or even
death.

Preventing the TV from
Toppling

• Secure the TV to a wall and/or stand.

• Do not allow children to play or climb on
furniture and TV sets.

• Avoid placing or hanging items on the TV.

• Never install the TV on:

– slippery, unstable and/or uneven surfaces.
– furniture that can easily be used as steps,

such as a chest of drawers.

• Install the TV where it cannot be pulled,
pushed, or knocked over.

• Route all AC power cords and connecting
cables so that they are not accessible to
curious children.

Recommended Measures to
Secure the TV

Consider the following measures when
securing your TV to a Stand (not supplied).

1 Secure the Stand for the TV

Make sure the Stand can adequately support
the weight of the TV. Use two angle braces
(not supplied) to secure the stand. For each
angle brace use the appropriate hardware to:

• Attach one side of the angle brace to the
wall stud.

• Attach the other side to the Stand.

Angle brace
(not supplied)

Stand

2 Secure the TV to the Stand

Use the optional hardware listed below (not
supplied):

• M4 × 16 machine screw (screwed into the
TV’s Table-Top Stand)

• A screw or similar (attach it to the Stand)

• Rope or chain (strong enough to support the
weight of the TV). Make sure that there is
no excess slack in the rope or chain.

12

An alternative way to secure the TV is with an
optional Sony Support Belt Kit.

M4 × 16
machine
screw (not
supplied)

Rope or

Screw hole on
the Table-Top
Stand

~

Contact Sony Customer Support to obtain the
optional Support Belt Kit by providing your TV
model name.

• For United States call: 1-800-488-7669 or visit:
www.sony.com/accessories

• For Canada call: 1-877-899-7669

Screw
(not supplied)

chain (not
supplied)

3 Anchor the TV to the Wall

Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).

Anchor bolts (not supplied)

Rope

Wall­mount
holes

~

• KDL-55HX800 is shipped with screws attached
to the rear of the TV. (They are fastened in the
screw holes for wall mounting.) Be sure to
remove the upper two screws prior to installing
the TV on a wall.

• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow the
three measures recommended.

or
chain
(not
supplied)

Wall-anchor
(not supplied)

Organizing the AC power cord

Setting up your TV

13

Running initial setup

POWER

1 Complete your cable connections

before proceeding with the Initial
Setup.

Connect the TV to your nearest power
outlet.

2 Check the ENERGY SAVING

SWITCH setting is on (z).

3 Press POWER on the TV.

When you switch the TV on for the first
time, the Language menu appears on
the screen.

Detaching the Table-Top Stand from the TV

Remove only the screws marked with on
the TV.

~

• Do not remove the Table-Top Stand for any

reason other than to install corresponding
accessories on the TV.

• For XBR-52/46HX909 and KDL-40HX800,

remove the stand rear cover prior to detaching the
Table-Top Stand.

• For KDL-55HX800, when installing the TV on a

wall, remove the four screws from the rear of the
TV. (They are fastened in the screw holes for wall
mounting.) Be sure to store the removed screws in
a safe place, keeping them away from children.

• For KDL-55HX800, when attaching the Table-

Top Stand again, be sure to fasten the four screws
(previously removed) to the original holes on the
rear of the TV.

• Do not hold by the stand rear cover while carrying

the Table-Top Stand to prevent dropping the stand
which may cause an injury or damage to the
property.

4 Follow the instructions on the screen.

~

• The ENERGY SAVING SWITCH must be

on (z) to set the clock and obtain program
information for the TV Guide.

• Home mode sets the TV to settings optimized for

home viewing (this setting is ENERGY STAR
compliant).

5 Select Continue to scan for available

channels and enable the

®

Screen

feature. If you receive channels
from a cable box or satellite receiver
and do not wish to use the TV’s built-in
tuner, select
Selecting

On Screen

Skip.

Skip will disable the TV Guide

feature, which is only

available when the TV’s tuner is used.

~

• If you skip the channel scan while in the setup

menus, TV Guide will be disabled.

14

TV Guide On

Using a Wall-Mount Bracket

Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand; see “Detaching
the Table-Top Stand from the TV” (page 14).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.

For product protection and safety reasons,
Sony strongly recommends that you use the
Wall-Mount Bracket designed for your TV
and the installation should be performed by
a Sony dealer or licensed contractor.

• Follow the instruction guide provided with
the Wall-Mount Bracket for your model.
Sufficient expertise is required in installing
this TV, especially to determine the
strength of the wall for withstanding the
TV’s weight.

• Be sure to use the screws supplied with the
Wall-mount bracket when attaching the
mounting hooks to the TV set.
The supplied screws are designed so that
they are 8 mm to 12 mm in length when
measured from the attaching surface of the
mounting hook.
The diameter and length of the screws differ
depending on the Wall-mount bracket
model. Use of screws other than those
supplied may result in internal damage to
the TV set or cause it to fall, etc.

8-12 mm

Installing the TV Against a Wall or Enclosed Area

Make sure that your TV has adequate
ventilation. Allow enough space around the
TV as shown below. Avoid operating the TV at
temperatures below 41 °F (5 °C).

Installed with stand

7

/

inches

11

8

4 inches
(10 cm)

Leave at least this much space around the set.

(30 cm)

4 inches
(10 cm)

Installed on the wall

7

11

inches

/

8

(30 cm)

4 inches
(10 cm)

4 inches (10 cm)

Never install the TV set as follows:

Air circulation is blocked.

Wall Wall

Air circulation is blocked.

inches

4 inches
(10 cm)

Leave at
least this
much space
around the
set.

2

3

/

8

(6 cm)

Setting up your TV

Screw
(supplied with the
Wall-mount bracket)

Mounting Hook

Hook attachment on rear of TV
set

• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small children.

~

• Read the supplied Safety Booklet for additional

safety information.

~

• Inadequate ventilation can lead to overheating of

the TV and may cause damage to your TV or
cause a fire.

15

To watch TV

To watch programs

1-2

Turn on the TV.

1

GUIDE

OPTIONS

HOME

0-9

ENT

2

1 Check the ENERGY SAVING

SWITCH setting is on (z).

2 Press POWER on the TV or on the

remote control to turn on the TV. (You
may use the 1 button located on the
front or back of the remote control.)

Select a TV channel.

2

To use the Guide
Press GUIDE to display the TV Guide On

Screen to view scheduled programs or to

select a program to watch. Press again to exit
the Guide. Use with 0-9 and ENT to select
digital channels. For example, to enter 2.1,
press , , and ENT.

To use the TV features

Press HOME to display TV Home Menu/
XMB

to access TV Settings and other

™

media and network related content.

Settings

Picture & Display

Adjust the picture and screen settings

Press for:

Picture Adjustments

Ambient Sensor

Screen

Pro Picture Setup

16

Press

OPTIONS

to display a list of convenient
functions and menu shortcuts. The Options menu
items vary based on current input and/or content.

Picture Adjustments

Sound Adjustments

Add to Favorites

Motionow

Scene Select

Speakers

MTS Audio

To use i-Manual

1

2

Your BRAVIA TV comes with an on-screen
manual. To learn more about your TVs features
you can access your i-Manual with the touch of a
button.

Press i-MANUAL.

1

Press F/f/G/g/ to navigate and

2

select items.

i-Manual

Welcome to i-Manual

"BRAVIA" TV Features

Watching TV

Using the Home Menu

Fun Features with Connected Equipment

Parts Description

Troubleshooting

Index

To watch TV

x Welcome to i-Manual
x “BRAVIA” TV Features

x Fun Features with Connected

Equipment

Introduces how to connect and enjoy optional

x Watching TV

Introduces convenient features such as TV
Guide, Favorites, etc.

x Using the Home Menu

You can find how to customize your TV
settings, etc.

~

• Images and illustrations may differ from what you are watching on this TV.

equipment.

x Parts Description
x Troubleshooting

You can find solutions for your problems.

x Index

RETURN

Back

17

Additional Information

Troubleshooting

The TV will indicate any problems with the STANDBY indicator flashing in red.

When the STANDBY indicator is flashing

The self-diagnosis function is activated.

1 Count how many times the STANDBY indicator flashes between each three second

break.
For example, the indicator may flash three times, go off for three seconds, then flash

again three times.

2 Press POWER on the TV to turn it off, disconnect the AC power cord, and contact

Sony Customer Support (information provided on the front cover) with how many times
the indicator flashes.

When the STANDBY indicator is not flashing

1 Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2 If the problem persists, contact Sony Customer Support (information provided on the

front cover).

Condition Explanation/Solution

Picture

There is no picture (screen
is dark) and no sound.

Tiny black dots and/or
bright dots appear on the
screen.

General

The TV’s power cannot be
turned on.

The TV turns off
automatically (the TV
enters standby mode).

The remote does not
function.

The TV and its surrounding
become warm.

The Parental Lock
password has been
forgotten.

• Check the antenna/cable connection.

• Connect the TV to the AC power, and press POWER on the TV.

• If the STANDBY indicator lights up in red, press POWER on the

remote control.

• The screen is composed of pixels. Tiny black dots and/or bright

dots (pixels) on the screen do not indicate a malfunction.

• Check to see the (z) mark on the ENERGY SAVING SWITCH

is pressed.

• Check if the Sleep Timer, Timer, or Idle TV Standby is

activated.

• The Auto Shut-off function may be set to On. If Auto
Shut-off is activated and TV receives no signal, the TV will
automatically enter standby mode in 15 minutes. Check Auto
Shut-off is activated under Eco feature of this TV.

• Replace the batteries.

• Your TV may be in SYNC mode. Press SYNC MENU, select TV

Control and then select Home (Menu) or Options to control
the TV.

• When the TV is used for an extended period of time, the TV and
its surround may become warm to touch. This is not malfunction
of the TV.

• Enter 4357 for the PIN code. (PIN code 4357 is always accepted.)

18

How to Care for Your BRAVIA

Safety is very important, please read and follow the safety documentation (Safety Booklet)
separately provided.

Unplug the TV and other connected equipment from the wall
outlet before you begin cleaning your TV.

• Wipe the LCD screen gently with a soft cloth.

• Stubborn stains may be removed with a cloth slightly moistened with a
solution of mild soap and warm water.

• If using a chemically pretreated cloth, please follow the instruction
provided on the package.

• Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

• Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.

The TV should also be placed on a stable surface to prevent it from toppling over (see page 12).
If you have young children or pets at home, check regularly to insure the TV is securely fastened.

Additional Information

19

Specifications

System

Television system NTSC: American TV standard

Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69

Panel system LCD (Liquid Crystal Display) Panel

Speaker output 10 W + 10 W

Input/Output jacks

CABLE/ANTENNA 75-ohm external terminal for RF inputs

VIDEO IN 1/2 VIDEO / AUDIO

COMPONENT IN 1/2 YP

HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 720/24p, 1080i, 1080p, 1080/24p

AUDIO OUT 500 mVrms (typical)

DIGITAL AUDIO OUT
(OPTICAL)

PC IN D-sub 15-pin, analog RGB

PC/HDMI 4 AUDIO INPUT Stereo mini jack

LAN

USB/DLNA Refer to the i-Manual for supported format.

3D SYNC 3D Sync terminal for optional transmitter

REMOTE (HX909 series only) RS232C, D-sub 9 pin.

Model name KDL-/XBR- 55HX800 52HX909 46HX909 46HX800 40HX800
Power and others

Power requirement 110 V - 240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)

Power consumption

in use

2

in DAM*

in standby Less than 0.12 W with 120 V AC and less than 0.2 W with 240 V AC

Screen size
(inches measured diagonally)

Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)

Speaker
Full range with speaker (mm)

Dimensions with stand (mm)

Mass with stand (kg)/(lb.) 26.9/59.3 42.9/94.5 36.2/79.8 19.2/42.3 16.4/36.2

Supplied accessories

Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket / TV Stand / 3D Glasses (TDG-BR100/TDG-

box (2) (inches)

without stand (mm)

wall-mount hole pattern (mm)

wall-mount screw size (mm)

without stand (kg)/(lb.) 22.6/49.8 36.9/81.3 30.2/66.6 16.9/37.3 14.2/31.3

ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)

Analog Cable: 1 - 135 / Digital Cable: 1 - 135

BPR (Component Video) / Signal format: 480i, 480p, 720p, 1080i, 1080p / AUDIO

HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

AUDIO (HDMI IN 4)

PCM/Dolby Digital optical signal

10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment.
10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)*

This jack is for receiving the external control signal.

167 W 201 W 184 W 149 W 132 W

14 W

(You may hear a clicking noise during the download but this is normal.)

(inches)

(inches)

54.6 inches
(55 class)

34 × 160

3

1

/8 × 6 3/8

1,278 × 797 × 350

3

50

/8 × 31 1/2 ×

7

13

/8

1,278 × 765 × 73

3

50

/8 × 30 1/8 ×

7

/8

2

52 inches 46 inches 40 inches

34 × 100

3

1

1,263 × 807 × 400

3

49

/4 × 31 7/8 ×

3

15

/4

1,263 × 775 × 67

3

49

/4 × 30 5/8 ×

3

/4

2

/8 × 4

1,124 × 727 × 400

3

44

/8 × 28 5/8 ×

3

15

1,124 × 695 × 67

3

44

/8 × 27 3/8 ×

3

2

1,085 × 688 × 260

42

/4

1,085 × 656 × 74

3

42

/4

1 3/8 × 6 3/8

3

/4 × 27 1/8 ×

1

10

/4

/4 × 25 7/8 × 3

400 × 300 300 × 300

M6

(length: refer to diagram on page 15.)

See “Checking the accessories” (page 4).

BR50) / 3D Sync Transmitter (TMR-BR100)

34 × 160

952 × 613 × 250
37

952 × 581 × 74

37 1/2 × 22 7/8 × 3

1

/2 × 24 1/4 ×

7

9

/8

1

*1 For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
*2 Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen.

• Optional accessories availability depends on its stock.

• Design and specifications are subject to change without notice.

20

Declaration of Conformity

Trade Name: SONY
Model: KDL-55HX800/XBR-52HX909/XBR-46HX909/
KDL-46HX800/KDL-40HX800
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.

For customers in Canada

This Class B digital apparatus complies with Canadian
ICES-003.

FCC Related Information

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:

❑ Reorient or relocate the receiving antenna.
❑ Increase the separation between the equipment and

receiver.

❑ Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

❑ Consult the dealer or an experienced radio/TV

technician for help.

Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.

Compatible Optional Accessories
Information

Use the following Sony optional accessories with
your TV model.

Sony TV Model No.

KDL-/XBR-

55HX800 52HX909 46HX909 46HX800/

40HX800

Sony Wall-Mount
Bracket Model No.

Sony TV
Stand No.

* Some of these TV Stand models may not be available in

Use with other optional accessories may cause instability
and could result in property damages or injury.

For instructions on using the Wall-Mount bracket with your
TV please go to http://esupport.sony.com
model and download “Additional Information for Using
Sony Wall-Mount Bracket”.

*

your area.

–

SU-WL500

SU-52HX1 SU-46HX1

for your TV

–

To Customers

Sufficient expertise is required for TV installations. Be
sure to subcontract the installation to a Sony dealer or
licensed contractor and pay adequate attention to safety
during the installation.

Additional Information

Note

This television includes a QAM demodulator which should
allow you to receive unscrambled digital cable television
programming via subscription service to a cable service
provider. Availability of digital cable television
programming in your area depends on the type of
programming and signal provided by your cable service
provider.

21

Online
Registration:

Software
Updates:

For Your Convenience

Be sure to register your TV.

United States
Canada

Your TV is capable of receiving software updates. For the
latest information about software updates for your TV, visit:

United States
Canada

NOTE: If your TV is connected to the Internet, you can check
for software updates by selecting Settings, Product
Support and then Automatic Software Update.

http://productregistration.sony.com
http://www.SonyStyle.ca/registration

http://www.sony.com/tvsupport
http://www.sony.ca/support

© 2010 Sony Corporation

Printed in U.S.A.