Sony KDL-32S3000, KDL-32SL130, KDL-40SL130 Quick Setup Guide

3-196-473-12(1)

Your New BRAVIA

Flat-panel LCD HDTV

™

Connecting Your TV

KDL-26S3000 KDL-32S3000

KDL-32SL130

KDL-40SL130 KDL-40S3000 KDL-46S3000

Quick Setup Guide

For further information, see the Operating Instruction Manual supplied with the TV. Please retain this guide for your future reference.

For Your Convenience

Please contact Sony directly if you have questions on the use of your television after reading your Quick Setup Guide and Operating Instruction Manual.

Contact Sony Customer Support at:

http://www.sony.com/tvsupport

Or to speak with a support representative: United States Canada 1-800-222-SONY (7669) 1-877-899-SONY (7669)

Please Do Not Return the Product to the Store

Congratulations! Your new BRAVIA™ TV opens the door to the “Stunning HD Experience”. This guide will explain how to get the most from your new High Definition TV.

Learn more. Visit the Sony HDTV Learning Center www.sony.com/HDTV Please take these steps before you power up your BRAVIA™:

■

www.sony.com/registration (from U.S.A.) www.SonyStyle.ca/registration (from Canada)

■

Make sure you’ve removed all accessory contents from packaging.

■

Install 2 AA batteries (supplied separately) in your remote control.

■

Determine whether you will hang your TV on a wall or place it on a floor stand. Sony wall mounting brackets are designed to provide the best fit.

■

Give your TV 2 3/8 inches (6 cm) of space behind it to properly ventilate.

The Four Steps to a Stunning HD Experience: Set, Sound, Source, and Setup

Along with your BRAVIA™ TV set, a complete HD system requires an HD sound system, a source of HD content, and proper setup connection with components such as your HD cable

or satellite box.

You must get HD programming to experience the stunning detail of HDTV.

The quality of the image you see on your BRAVIA™ can only be as high as the quality of the signal it is displaying. This chart shows the different signal types and how to access them.

Best Signal Performance

High Definition

Content

Digital Content

Analog Content

Contact your cable or satellite provider to upgrade your service to HD. Receive over-the-air HD broadcasts with an HD-quality antenna (www.antennaweb.org) and discover the wealth of entertainment now available on super-high-resolution Blu-ray Disc™.

Comments Sources

Best Picture Quality 16:9 Aspect Ratio

Good Picture Quality Aspect Ratio based on Program

Original TV format 4:3 Aspect Ratio

HD Over-The-Air Antenna HD Cable Subscription/ Programming HD Satellite Subscription

Over-The-Air Antenna Digital Cable Subscription Digital Satellite Subscription

Over-The-Air Antenna Cable Subscription

Your BRAVIA™ TV must be properly connected to components such as sound system and cable or satellite box.

See reverse side of this poster for sample connection diagrams.

Turn off and unplug all components before making connections.

■

Do not turn on the TV until connection setup is completed.

Audio/Video Performance

Input

Connector

HDMI 1 HDMI 2

Component 1 Component 2

Video 1 Video 2

Video 1 Video 2 Video 3

Video Connection Audio Connection High or Standard Definition Quality

HDMI connection*

Component connection

S VIDEO connection

(Use this connector in place of composite video connector)

Composite video connection

(Shown with video and audio connectors)

HDMI cable carries both video and audio signals. Separate audio cable is not needed. (*When HDMI is connected to DVI with an adapter, a separate audio L/R is necessary.)

Audio L/R

1080p, 1080i, 720p, 480p, 480i, PC (Compatible with HD or SD content)

1080p, 1080i, 720p, 480p, 480i (Compatible with HD or SD content)

480i (SD content)

What is HDMI™?

HDMI (High-Definition Multimedia Interface) cables are the standard for connecting HDTV. They are built to properly handle high bandwidth, uncompressed video and multi-channel audio—all in one cable.

Connecting a PC to Your BRAVIA™

■

May require DVI-to-HDMI adapter and separate audio connector.

■

Connect PC’s audio output when using a Digital Video Interface (DVI) or HD15 connection.

■

Press PC’s FUNCTION Key + Select Output to transmit to TV.

■

When using an HD15 connection, adjust TV’s Pitch and Phase to correct sharpness.

■

Refer to your BRAVIA™ Operating Instruction Manual for more information.

To learn more about HDTV, visit www.sony.com/HDTV

Initial Setup instructions are displayed on the screen when your BRAVIA™ is powered on

for the first time.

Running Initial Setup

1 Select the language for the OSD (on screen display).

Initial Setup

Please select a language. Language settings will apply to

on screen display as well as default audio for digital

channels. Highlight a choice and press to continue.

English

Español

Français

Step 1 of 5

2 Connect either Antenna or Cable to your TV.

Initial Setup

Auto Program allows the TV to tune channels directly from your

cable or antenna feed. If you are using only a cable or satellite set top box, it is not necessary to run Auto Program. In this case, choose “Skip”. Auto Program may take 30+ minutes to complete.

Auto Program

Skip

VHF/UHF/CABLE

Step 2 of 5

Select Auto Program to advance to the Auto Programming.

If you are not using the VHF/UHF/CABLE connection to TV, you can cancel the Auto

Program by selecting the Skip option.

3 Your TV will detect the type of signal connected and will start scanning for the channels.

Initial Setup Step 3 of 5

Please allow 30+ minutes to complete.

Pressing or will cancel auto program.

Channels Found Analog: 58 Digital: 0

Searching...

4 Follow on-screen instructions to complete setup and begin viewing your TV.

Initial Setup

Select

“OK” to use your TV

Step 5 of 5

To Access Initial Setup by Remote Control

If you did not follow the Initial Setup screen the first time, press the HOME button on your remote control to display the TV Home Menu/XMB™ (XrossMediaBar) and select the Initial

Setup icon under the Settings category.

1 XMB™ (XrossMediaBar) appears.

HDMI Settings

General

1.2.3

2 Select Initial Setup icon.

Settings

Start Initial Setup now?

Some channels may be overwritten.

1.2.31.2.

Yes

To Do List

When the Initial Setup is completed, consider carrying out these items:

Set Clock Set Closed Captions (CC) Set Parental Lock Show/Hide Channels Label Inputs (skip inputs) Speakers On/Off

For details, refer to your BRAVIA™ Operating Instruction Manual.

Watching Your TV

Select Your Content Source

Whether you are watching cable, satellite or broadcast TV; playing a VCR, DVD or Blu-ray Disc™; or connecting to your PC, you need to choose the correct Input using your remote control:

Press the HOME button on your remote control to display on-screen the TV mode or

■

External Inputs selection menu; OR Press the INPUT button repeatedly until your selection is highlighted on-screen.

■

Adjust Screen Shape and Aspect Ratio

High Definition and Standard Definition signals are transmitted with different aspect ratios (the width-to-height shape of the image). Most HD signals use a widescreen aspect ratio of 16:9. Most SD signals use a boxy 4:3 aspect ratio. The 16:9 aspect ratio looks perfect on your BRAVIA™, but a 4:3 image must be adjusted to look right. You can:

■

Adjust your TV so boxy 4:3 images are automatically re-configured (zoomed or stretched) to fit the wide TV screen; OR

■

Watch SD content in its original, boxy format with wide black bars surrounding the image to fill in unused space (for example, you may prefer to watch an old classic movie in its original 4:3 format, not reconfigured for a wide screen).

■

Press the WIDE button on your remote control to display the Wide Mode setting of your preference.

■

Visit www.learningcenter.sony.us/HomeAudioandVideo/Televisions/Research1/TheBasicsofDTV for more information.

Customize Sound and Picture Quality

You can choose optimum sound and picture settings to match the content you are displaying on your TV:

Press the HOME button on your remote control and select Picture or Sound. Choose

■

the appropriate setting for your content. Use the remote control OPTIONS button to quickly adjust sound and picture quality.

■

Refer to your BRAVIA™ Operating Instruction Manual for more information.

To learn more about HDTV, visit www.sony.com/HDTV

XMB™ (XrossMediaBar) with focus on Settings. Select Settings to customize

your TV.

Product Support

Clock/Timers

Sound

Screen

Video Options

XMB™ (XrossMediaBar) with focus on TV mode. Select the channels from here or use the 0-9 number buttons on your remote control.

XMB™ (XrossMediaBar) with focus on External Inputs. Select connected device

from here or use the INPUT button on your remote control.

Cable KFMB-DT

8.1

10.1

Video2

Video3

Component2

HDMI1

HDMI2

HD Basic Connection

HD Basic Connection with A/V Receiver

HD Basic Connection with Home Theater System

Cable/Antenna

Splitter

Blu-ray Disc™/DVD

SAT (dish)

HD Cable Box or HD Satellite Receiver

Rear of TV

Cable/Antenna

Splitter

Blu-ray Disc™/DVD

SAT (dish)

HD Cable Box or HD Satellite Receiver

Rear of TV

A/V Receiver

Blu-ray Disc™/DVD

Cable/SAT (dish)

SD Cable Box or SD Satellite Receiver

HD Antenna

Rear of TV

Home Theater System

Coaxial

HDMI

HD15

Required Cable Types for Connection Notes on Connection:

DVI-to-HDMI

Component

Basic Connection with SD VCR/DVD

Cable/Antenna

Splitter

Composite

Audio (L/R)

Mini-Pin Audio

Audio (L/R) with Mini-Pin

Digital Optical Audio

Cable/Antenna

Splitter

Your TV is equipped with two HDMI inputs, connect your incoming signal source (HD Cable Box, HD Satellite Receiver, or DVD) with an HDMI or component video for the best

■

possible picture quality. If your connecting equipment has DVI output instead of the HDMI output, you must use DVI-to-HDMI cable for the video and also connect an audio cable for the sound. If this is the

■

case, connect the cable to HDMI IN 2 (input) of your TV. P&P/PIP functions require VHF/UHF/CABLE connection.

■

When receiving High-Definition content signal by over-the-air antenna, it is best to use the HD antenna.

■

When using a DVI-to-HDMI cable, make sure to connect the DVI side first.

Notebook PC Connection

Desktop PC Connection

Cable/Antenna

Splitter

VCR DVD

VCR/DVD Combo

Rear of TV

SAT (dish)

HD Cable Box or HD Satellite Receiver

Rear of TV

Notebook PC

Rear of TV

SAT (dish)

HD Cable Box or HD Satellite Receiver