Conditions of Use:
(1) Please use this information only for the purpose of performing repair and recycling Sony products. Using this information
for any purpose other than the purpose described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part
without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-todate before using it.
4. Metal Washer (Flat) or Coin (for remove Rear Cover)
5. Ruler (for remove Rear Cover)
6. Service Manual (Unique) (for remove & replace details)
2 OPTIONAL EQUIPMENT
1. Screwdriver (e.g. #0 Phillips Screwdriver)
2. Parts Tray for loose screws and small items
TOOLS & EQUIPMENT
Thickness: approx. 1.5mm
Diameter: 20~25mm
(wrap in tape (L=50mm))
2. Flashlight
3. Service Manual (Common) (for t/shooting information)
For Surface Mounted Parts/Connectors:
Hot-Air Type soldering Iron is needed.
Plastic or Metal Ruler
(In case of Metal ruler, wrap in tape
(L=50mm) for prevent scratches)
3
DISSASSEMBLY AND REMOVAL CAUTION 55”
4
DISSASSEMBLY AND REMOVAL CAUTION 55”
5
EXPLODED VIEWS AND OTHER PARTS 55”
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and/or replaced
1-4EXPLODEDVIEWANDPARTLIST
15
13
3
*
2
12
4
14
6
7
5
11
10
9
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and/or replaced
2-4 EXP LODE D VIEW AN D PART LI ST
15
13
3
12
4
14
7
6
5
11
*
210
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly
*
Only on limited region / country / TV model
8
9
Stand
16
18
17
19
19
*
1
11
CONNE CTOR
SP(1)
SP(1)
CN6401(GL)(1)
CN6401(GL)(1)
J1(WIFI/BT)(1)
J1(WIFI/BT)(1)
CN102(HT2)(1)
CN102(HT2)(1)
CON)(1)
CON)(1)
HARNESS/CABLES 65”
2
5
1
3
4
REF. NOPART NO.DESCRIPTIONDESTINATIONREMARKS
1-006-513-34CONNECTOR ASSY 4P (SP)
1
1-006-513-42
1
1-006-502-11CONNECTOR ASSY 30P
2
1-006-502-21
2
1-006-505-11FLEXIBLE FLAT CABLE 20P
3
1-006-506-11
3
1-006-510-11FLEXIBLE FLAT CABLE 25P
4
1-006-509-11
4
1-010-542-11FLEXIBLE FLAT CABLE 51P
5
1-010-543-11
5
CONNECTOR ASSY 4P (SP)
CONNECTOR ASSY 30P
FLEXIBLE FLAT CABLE 20P
FLEXIBLE FLAT CABLE 25P
FLEXIBLE FLAT CABLE 51P
Except RU3
RU3
Except RU3
RU3
Except RU3
RU3
Except RU3
RU3
Except RU3
RU3
CN3550(BM5A)/CN6603(BM5ST)-
CN3550(BM5A)/CN6603(BM5ST)-
CN1701(BM5A)-
CN1701(BM5A)-
CN3801(BM5A)-
CN3801(BM5A)-
CN1200(BM5A)-
CN1200(BM5A)-
CN4200(BM5A)-U1(T-
CN4200(BM5A)-U1(T-
12
SET PART LIS T
PARTS LIST 65”
REF. NOPART NO.DESCRIPTION
2
2
10
10
12
12
12
15
15
1-005-621-12
1-005-628-13
C7L AC POWER CORD SETS (EU)
C7L AC POWER CORD SETS (UK)
A-5027-340-ACOMPL_SVC_BM5A_APH_EUUK
A-5031-263-ACOMPL_SVC_BM5A_APHB_WW
1-004-423-23
1-010-150-21
1-004-423-42
GL02P-STATIC CONVERTER (TV)
GL15P-STATIC CONVERTER (TV)
GL02P-STATIC CONVERTER (TV)
A-5029-026-AP-MOD(YSBM065CNO01)SVC
A-5029-082-AP-MOD(YSBM065CNO01)SVC
REMARKS
CEI, CEP , RU3 ( EU Plug)
UKA ( UK Plug)
KD-65X80J / X81J / X82J
FW-65BZ30J
Except RU3
RU3
FW-65BZ30J
Except RU3
RU3
Cable
Printed Circuit Board, incl. capacitors
Internal Power Supply
Liquid Crystal Display
13
DISSASSEMBLY AND REMOVAL CAUTION 75”
14
DISSASSEMBLY AND REMOVAL CAUTION 75”
15
EXPLODED VIEWS AND OTHER PARTS 75”
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and/or replaced
3-4EXPLODEDVIEWANDPARTLIST
16
14
13
3
12
4
7
15
6
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and/or replaced
4-4 EXP LODE D VIEW AN D PART LI ST
14
12
11
13
3
4
*
2
6
5
10
8
9
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly
*
Only on limited region / country / TV model
7
Stand
16
15
18
17
18
1
21
CONNE CTOR
SP(1)
SP(1)
CN6401(GL)(1)
CN6401(GL)(1)
J1(WIFI/BT)(1)
J1(WIFI/BT)(1)
CN102(HT2)(1)
CN102(HT2)(1)
CON)(1)
CON)(1)
HARNESS/CABLES 43”
2
3
5
1
4
REF. NOPART NO.DESCRIPTIONDESTINATIONREMARKS
1
1
2
2
3
3
4
4
5
5
1-010-989-12
1-010-989-21
1-010-990-11
1-010-990-21
1-010-991-11
1-010-992-11
1-010-993-11
1-010-994-11
1-010-995-11
1-010-996-11
CONNECTOR ASSY 4P (SP)
CONNECTOR ASSY 4P (SP)
CONNECTOR ASSY 30P
CONNECTOR ASSY 30P
FLEXIBLE FLAT CABLE 20P
FLEXIBLE FLAT CABLE 20P
FLEXIBLE FLAT CABLE 25P
FLEXIBLE FLAT CABLE 25P
FLEXIBLE FLAT CABLE 51P
FLEXIBLE FLAT CABLE 51P
Except RU3CN3550(BM5A)/CN6603(BM5ST)-
RU3CN3550(BM5A)/CN6603(BM5ST)-
Except RU3CN1701(BM5A)-
RU3CN1701(BM5A)-
Except RU3CN3801(BM5A)-
RU3CN3801(BM5A)-
Except RU3CN1200(BM5A)-
RU3CN1200(BM5A)-
Except RU3CN4200(BM5A)-U1(T-
RU3CN4200(BM5A)-U1(T-
22
SET PART LIS T
PARTS LIST 43”
REF. NOPART NO.DESCRIPTION
2
2
9
9
11
14
1-005-621-12C7L AC POWER CORD SETS (EU)
1-005-628-13
A-5027-340-A
C7L AC POWER CORD SETS (UK)
COMPL_SVC_BM5A_APH_EUUK
A-5031-263-ACOMPL_SVC_BM5A_APHB_WW
1-009-799-21GL11P-STATIC CONVERTER (TV)
A-5029-032-A
P-MOD(YSBM043CNO01)SVC
REMARKS
CEI , CEP , RU3 ( EU Plug )
Cable
UKA ( UK Plug)
KD-43X80J / X81J / X82J
Printed Circuit Board, incl. capacitors
FW-43BZ30J
Internal Power Supply
Liquid Crystal Display
23
DISSASSEMBLY AND REMOVAL CAUTION 50”
24
DISSASSEMBLY AND REMOVAL CAUTION 50”
25
EXPLODED VIEWS AND OTHER PARTS 50”
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and/or replaced
5-4 EXP LODE D VIEW AN D PART LI ST
14
12
11
3
4
13
5
6
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly
*
Only on limited region / country / TV model
7
Stand
15
16
18
10
*
2
1
9
8
17
18
26
CONNE CTOR
HARNESS/CABLES 50”
2
3
5
1
4
REF. NOPART NO.DESCRIPTIONDESTINATIONREMARKS
1
1
2
2
3
3
4
4
5
5
1-010-989-12
1-010-989-21
1-011-001-11
1-011-001-21
1-011-002-11FLEXIBLE FLAT CABLE 20PExcept RU3
1-011-003-11FLEXIBLE FLAT CABLE 20PRU3
1-011-004-11FLEXIBLE FLAT CABLE 25PExcept RU3
1-011-005-11FLEXIBLE FLAT CABLE 25PRU3
1-011-006-11FLEXIBLE FLAT CABLE 51PExcept RU3
1-011-007-11FLEXIBLE FLAT CABLE 51PRU3
CONNECTOR ASSY 4P (SP)
CONNECTOR ASSY 4P (SP)
CONNECTOR ASSY 30P
CONNECTOR ASSY 30P
Except RU3
RU3
Except RU3
RU3
CN3550(BM5A)/CN6603(BM5ST)-SP(1)
CN3550(BM5A)/CN6603(BM5ST)-SP(1)
CN1701(BM5A)-CN6401(GL)(1)
CN1701(BM5A)-CN6401(GL)(1)
CN3801(BM5A)-J1(WIFI/BT)(1)
CN3801(BM5A)-J1(WIFI/BT)(1)
CN1200(BM5A)-CN102(HT2)(1)
CN1200(BM5A)-CN102(HT2)(1)
CN4200(BM5A)-U1(TCON)(1)
CN4200(BM5A)-U1(TCON)(1)
27
SET PART LIS T
PARTS LIST 50”
REF. NOPART NO.DESCRIPTION
2
2
9
9
11
14
1-005-621-12C7L AC POWER CORD SETS (EU)
1-005-628-13
C7L AC POWER CORD SETS (UK)
A-5027-340-ACOMPL_SVC_BM5A_APH_EUUK
A-5031-263-ACOMPL_SVC_BM5A_APHB_WW
1-009-800-21
A-5029-030-AP-MOD(YSBM050CNU01)SVC
GL12P-STATIC CONVERTER (TV)
REMARKS
CEI , CEP , RU3 ( EU Plug )
UKA ( UK Plug )
KD-50X80J / X81J / X82J
FW-50BZ30J
Cable
Printed Circuit Board, incl. capacitors
Internal Power Supply
Liquid Crystal Display
28
DISSASSEMBLY AND REMOVAL CAUTION 32”
29
DISSASSEMBLY AND REMOVAL CAUTION 32”
30
DISSASSEMBLY AND REMOVAL CAUTION 32”
31
EXPLODED VIEWS AND OTHER PARTS 32”
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
•and shaded parts are critical for safety. Replace only with part number specified.
•Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and/or replaced
6-4 EXP LODE D VIEW AN D PART LI ST
12
14
13
7
2
11
5
10
6
5
15
13
9
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when
ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly