Owner’s Record
The model and serial numbers are located at the bottom of the base station. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
Model No. LF-X11
Serial No.____________________________
Contacting Sony
If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (US residents only) or 1-877-899-SONY (7669) (Canadian residents only).
Important Safety Instructions
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injry from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
2
WARNING
To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
This equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement:
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The LF-X11 has been tested and found to comply with the Federal Communications Commission (FCC) guidelines on radio frequency energy (RF) exposures. The maximum SAR levels tested for the LF-X11 has been show to be "x.xx" W/kg at Body.
*This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
*When using the unit with 802.11a (5GHz), use in doors.
3
NOTIFICATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
For customers in the United States
This product contains mercury. Disposal of this product may be regulated if sold in the United States. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance (http://eiae.org).
Pour les clients résidant aux États-Unis
Ce produit contient du mercure. L’élimination de ce produit peut être soumise à réglementation s’il est vendu aux États-Unis. Pour obtenir des informations concernant l’élimination ou le recyclage, veuillez contacter les autorités locales ou l’Electronics Industries Alliance (http://www.eiae.org).
4
Table of Contents
Locating the Components...................................................................................... |
6 |
Checking the Package Contents ............................................................................ |
9 |
Connecting a Cable or an Antenna ...................................................................... |
10 |
Connecting Video/Audio Equipment .................................................................. |
10 |
Turning On the Power ......................................................................................... |
13 |
Connecting to the Internet ................................................................................... |
15 |
Configuring Network Settings............................................................................. |
17 |
Setting Up for Mail.............................................................................................. |
20 |
Watching TV and Video...................................................................................... |
21 |
Basic TV/Video Screen ....................................................................................... |
22 |
Viewing Web Pages............................................................................................. |
23 |
Basic Internet Screen ........................................................................................... |
24 |
Using E-mail........................................................................................................ |
25 |
Basic E-mail Screen............................................................................................. |
25 |
Viewing Enlarged Images ................................................................................... |
28 |
Basic Digital Photo Album Screen...................................................................... |
29 |
Specifications....................................................................................................... |
30 |
5
Locating the Components
Monitor
Right side
1 3WIRELESS indicator
2Indicates the status of wireless communications.
|
|
Lights blue: Communications using the 5 GHz |
|
3 |
channel are in progress. |
||
Lights green: Communications using the 2.4 GHz |
|||
4 |
channel are in progress. |
||
Off: No radio waves are being output. |
|||
|
|
||
5 |
4“Memory Stick” indicator |
||
|
|
Lights orange while the unit and the inserted |
|
|
|
“Memory Stick” are communicating. |
|
|
|
5“Memory Stick” slot |
|
|
|
Insert a “Memory Stick.” |
|
|
6 |
6USB connector |
|
|
|||
|
7 |
Connect a commercially available keyboard. |
|
|
7LAN connector |
||
|
8Connect a LAN cable.
8Speakers
Left side
9Mail Auto Receive indicator
Lights red when new e-mail is received through periodical e-mail check.
0e Charge indicator
Indicates the status of charging.
Lights red: Charging the battery is in progress. Off: Charging finished.
qa Infrared receiver
qsi Headphones jack (stereo minijack) qdAV IN connector
9
0
qa
qs
qd
6
Locating the Components
Top
|
|
qfStylus pen compartment |
|
|
qgPOWER switch |
|
|
Turns on and off the power to the monitor. |
|
|
qhVOLUME +/– buttons |
|
|
Adjusts the volume of the speakers. |
|
|
qjCAPTURE button |
qf |
qg qh qj qk |
Saves the currently displayed screen in an |
album as a still image. |
qkINDEX button
Displays the Index window.
Rear
qlMonitor handle ql w;Monitor stand
waBattery
wsDC IN connector
Connect the AC power adaptor (supplied) for the monitor.
w; wa |
ws |
7
Base Station
Front |
1WIRELESS indicator |
||
|
|
|
Indicates the status of wireless communications. |
|
|
|
Lights blue: Communications using the 5 GHz channel are |
|
|
|
in progress. |
|
|
|
Lights green:Communications using the 2.4 GHz channel |
|
|
|
are in progress. |
|
|
|
2LINE indicator |
|
|
|
Indicates the connection status to an external network such |
|
|
1 |
as the Internet. |
|
|||
|
|
|
Blinks green: Connection is being made. |
2Lights green: Connection has been made. Off: Connection has not been made.
|
3 |
3NetAV indicator |
|
Indicates the connection status when connection with the |
|
|
||
|
|
|
|
|
monitor has been made using the NetAV function. |
|
4 |
Lights green: Connection to the NetAV has been made. |
|
||
|
|
Off: Connection to the NetAV has not been made. |
54POWER indicator
|
|
Lights green when the power to the base station is on. |
|
|
|
5POWER switch |
|
|
|
Turns on and off the power to the base station. |
|
|
|
6LAN connector |
|
|
|
Connect a LAN cable. |
|
Rear |
|
7USB connector |
|
|
|
8VHF/UHF connector |
|
|
|
Connect an antenna connection cable. |
|
|
|
9VIDEO LINE OUTPUT (AUDIO/VIDEO) jacks |
|
|
|
Output signals that are input to the video input 2 jack. |
|
|
|
Connect audio and video cables. |
|
|
|
0DC IN connector |
|
|
|
Connect the AC power adaptor (supplied) for the base |
|
|
6 |
station. |
|
qf |
7 |
qaIR BLASTER connector |
|
Connect the AV mouse (supplied). |
|||
qd |
|
||
8 |
qsVIDEO LINE INPUT1 (S-VIDEO/AUDIO/VIDEO) jacks |
||
|
|||
|
|
Connect S-video and audio cables; or connect audio and |
|
qs |
|
video cables. |
|
9 |
qdVIDEO LINE INPUT2 (AUDIO/VIDEO) jacks |
||
|
|||
|
|
Connect audio and video cables. |
|
|
|
qfBASESTATION RESET button |
|
qa |
0 |
Returns all settings including line and wireless |
|
|
|
communications settings on the base station to the factory |
|
|
|
defaults. |
8
Checking the Package Contents
Checking the
Package Contents
After unpacking, check that all the following items have been included:
•Base station (× 1)
•Monitor (× 1)
•Stylus (× 1)
•BP-LX1A battery (× 1)
•AC-LX1B AC power adapter for the base station (× 1)
•AC-LX1M power adaptor for the monitor (× 1)
•Power cord (× 2)
•AV mouse (× 1)
•Base station stand (× 1)
9
Connecting a Cable or an Antenna
Connecting a TV and Cable/
Antenna
When you have connected your TV to the CATV cable or antenna, use this hookup.
With this hookup, set Cable to OFF in the Auto CH Program window of Settings TV/Video.
1 Turn off the power of your TV and remove the antenna or CATV cable from the antenna input of your TV.
2 Plug the OUT connector of the supplied antenna connector into the antenna input of your TV.
3 Plug the antenna or CATV cable removed from your TV in step 1 into the ANT connector of the supplied antenna connector.
4 Plug the output cord of the antenna connector into the VHF/UHF connector of the base station.
*If the output cord of the supplied antenna connector is short, use the optional EAC-40 TV antenna connector.
To connect the base station only to the antenna or CATV cable directly
Use the optional EAC-315 or equivalent antenna cable.
Connecting Video/
Audio Equipment
Connecting a Cable Box
Use this hookup if you subscribe to a cable TV system that uses scrambled or encoded signals requiring a cable box to view all channels.
1 Connect the coaxial connector from your cable service to the IN connector of the cable box.
2 Using a coaxial cable, connect the OUT connector of the cable box to the VHF/UHF connector of the base station.
With this hookup, set Cable to ON in the Auto CH Program window of Settings TV/Video.
Caution
To change channels using the cable box, set your Wireless Home Network TV to channel from 1 to 6, depending on the cable box channel output.
Connecting a VCR and Cable/
Antenna
Use this hookup if you have cable TV that does not require a cable box.
1 Disconnect all power sources.
2 Connect the CATV cable or antenna to the VHF/UHF IN connector of the VCR.
3 Using a coaxial cable, connect the VHF/ UHF OUT connector of the VCR to the VHF/UHF connector of the base station.
10