Sony FDR-X3000 Startup Guide

4-586-864-11(1)

Digital 4K Video Camera Recorder Digital HD Video Camera Recorder

Startup Guide

This guide describes the necessary preparations to start using the camera, the basic operations, and so on. For details, refer to the “Help Guide” (web manual). http://rd1.sony.net/help/cam/1640/h_zz/

For the detailed information on how to use the camera and software, visit the following Web site. http://www.sony.net/actioncam/support/

FDR-X3000/HDR-AS300

Read This First

What is needed to make an appealing movie with the camera

1 2

Getting Started Shooting

Checking the bundled items

The number in the parentheses indicates the quantity of that item bundled.

•Camera (1) / Underwater Housing (MPK-UWH1) (1)

Camera is set in the Underwater Housing. Open the cover of the case as illustrated below.

•Micro USB cable (1)

•Rechargeable battery pack

(NP-BX1) (1)

•Attachment Buckle (1)

•Startup Guide (this document) (1)

•Reference Guide (1)

Name of main parts

 (on/standby) button  IR remote receiver (FDR-X3000 only)  MENU button  Display panel  UP/DOWN buttons  REC lamp  REC (Movie/Still image) button/

ENTER (Menu execute) button

 REC/LIVE lamp

(N mark)

  Lens  Speaker  Microphones  Battery cover  GPS sensor  Connector cover (HDMI OUT, Multi/

Micro USB Terminal,Mic jack)

 REC lamp  Lock lever  Memory card cover

Getting Started

Charging the battery pack

Slide the lock lever down to open the battery cover, then

insert the battery pack.

Inserting a memory card

Printed side

microSD card/ microSDHC card/ microSDXC card

Memory cards that can be used with the camera

Memory card MP4 XAVC S

Memory Stick Micro™ (Mark2) media

microSD memory card

microSDHC memory card

microSDXC memory card

*1 SD Speed Class 4 ( ) or faster, or UHS Speed Class 1 ( ) or faster

A memory card that fulfills all the following specifications:

– 4 GB or more of memory – SD Speed Class 10 (

A memory card that is UHS Speed Class 3 ( 100 Mbps or faster (FDR-X3000 only).

Notes

•Operation with all memory cards is not assured. For details about memory cards other than cards manufactured by Sony, contact the individual makers.

•Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong direction, the memory card, memory card slot, or image data may be damaged.

•Format the memory card with the camera before use.

•Confirm that the connector cover and the battery pack/memory card cover are

securely closed and any foreign matter is not stuck in the cover before use. Otherwise, it may result in water immersion.

Terminal side

Memory Stick Micro™ (Mark2) media

 (Mark2 only)

*

), or UHS Speed Class 1 ( ) or faster

) is required when you record at

* *

–

Setting the clock

When the camera is turned on for the first time by pressing the (on/ standby) button, the area/daylight saving time (summer time)/date and time setting screen is displayed. Press the UP or DOWN button to select an item, then press the ENTER button to execute.

Hints

•The date and time/area/daylight saving time (summer time) setting screen is also displayed after the settings are reset.

•Regions are defined by the time difference between Greenwich Mean Time (GMT) and the standard time of your home. For details on the time difference, refer to “The list of time differences for world capitals” in the “Help Guide” (web manual).

Setting

Connecting to the smartphone

Creating your movie

You can edit movies by using Sony’s application software.

•Action Cam App (For smartphone/ tablet) http://www.sony.net/acap/

http://www.sony.net/

•Action Cam Movie Creator (For PC) http://www.sony.net/acmc/

Align the direction of the arrows on the camera and the battery pack

Lock lever

Close the cover securely, then slide the lock lever up to

lock.

Confirm that the yellow mark on the lock lever is not visible.

Open the connector cover, then connect the inactivated

camera to an activated computer with the micro USB cable (supplied).

CHG (Charge) lamp lights in amber while charging

Connector cover

Micro USB cable

Shooting

Setting the shooting mode

Press the MENU button, then select  the shooting mode.

List of modes

Icons Shooting modes

Movie mode

Photo mode

Time-lapse capture mode

Live streaming mode

Loop recording mode

Setting the movie format

Press the MENU button, then select (Shooting Settings)  the movie format (default: ). Select to shoot images in 4K quality (FDR-X3000 only).

Shooting

Press the REC button to start shooting. To stop shooting, press the REC button again.

* When you press the REC button while the “One touch

recording” setting is “ON,” recording starts with the last

Notes

•During periods of extended shooting, camera temperature may rise to a point where shooting stops automatically.

•If you use the camera while it is connected to an external power supply with the micro USB cable (supplied), you can reduce the battery consumption for shooting or playing back images. In this case, a charged battery pack is required.

Setting

Press the MENU button, press the UP or DOWN button to select the item, then press the ENTER button to execute.

1 Shooting screen 2 MENU screen

3 Shooting

ENTER button

Shooting Settings*

Icons Setting items

Image quality setting

Movie format

Time-lapse capture image size

Loop recording time

Still image mode switching

Still image shooting interval

Self-timer

Time-lapse shooting interval

Time-lapse shot number

SteadyShot (Movie)

SteadyShot (Still)

Angle setting

Zoom setting

Flip

AE shift

Time-lapse AE mode

Scene

White balance

Color mode

Audio recording setting

Wind noise reduction

Which items can be set depends on the shooting mode.

This setting is only available in some countries and regions.

This setting is only available with FDR-X3000.

A portion of this setting is only available with FDR-X3000.

shooting mode set before the camera was turned off.

MENU button

settings screen

ENTER button

Icons Setting items

4 Settings screen

Camera Settings

Airplane mode

Wi-Fi connection setting

Wi-Fi Hi Power

Setting*

Bluetooth setting

Bluetooth remote controller power setting

GPS log

Format

Time code/user bit*

IR remote*

HDMI settings*

Back ground music*

USB power supply

Beep

Beep volume

Lamp setting

One touch recording

Auto power off

Switching NTSC/PAL

Date & time setting

Area setting

Daylight saving time (summer time) setting

Version

Resetting the settings

For details about setting items, refer to “Changing the Settings” in the “Help Guide” (web manual).

Connecting to the smartphone

Installing PlayMemories Mobile™ on your smartphone

Android OS

Search for PlayMemories Mobile on Google Play, then install it.

iOS

Search for PlayMemories Mobile on App Store, then install it.

•When using iOS, One-touch functions (NFC) are not available.

Notes

•Update PlayMemories Mobile to the latest version if you have already installed it on your smartphone.

•The Wi-Fi function described in this manual is not guaranteed to work with all smartphones and tablets.

•The operation methods and display screens for the application are subject to change without notice by future upgrades.

•For more information about PlayMemories Mobile, refer to the following website. (http://www.sony.net/pmm/)

•Google play may not be supported depending on country or region. In this case, search for “PlayMemories Mobile” on the internet then install it.

Connecting

 Using the One-touch Function to connect to an NFC-enabled

Android smartphone

Set Wi-Fi to ON on the camera, and touch the (N mark) of the smartphone against the (N mark) of the camera. When PlayMemories Mobile starts, settings are automatically applied to establish Wi-Fi connection.

 Using the QR Code to connect to a smartphone via Wi-Fi

 Turn on the camera, and set Wi-Fi to ON on the camera.  Select the shooting mode: , , , .  Start PlayMemories Mobile on the smartphone.  Select [Scan QR Code of the Camera] displayed on the PlayMemories

Mobile screen.

 Select [OK] (If a message is displayed, select [OK] again).  Read the QR Code that is printed on the sticker attached to the rear

of the camera’s battery cover.





 

Android

 When [Connect with the camera?] is displayed on the smartphone,

select [OK].

iPhone/iPad

 Install a profile (setting information) to your smartphone according

to the on-screen directions.

 On the Home screen, select [Settings]  [Wi-Fi].  Select the SSID.  Return to the Home screen, then start PlayMemories Mobile.

   

Recalling your user ID and password without the sticker

If the sticker has peeled off or is unreadable, you can recall your user ID and password by the following procedure.

 Insert a charged battery pack into the camera.  Connect the camera to a computer with the micro USB cable

(supplied).

 Press the (on/standby) button to turn the camera on.  Display [Computer]  [PMHOME]  [INFO]  [WIFI_INF.TXT] on

your computer, then confirm your ID and password.

Creating your movie

Editing a movie with the Action Cam App

The Action Cam App allows you to import movies to your smartphone to edit them easily. In addition, you can create time-lapse movies. For more information about the Action Cam App, refer to the following website. http://www.sony.net/acap/

Install the Action Cam App that is compatible with your smartphone.

Note

•Google play may not be supported depending on country or region.

Editing a movie with Action Cam Movie Creator

Action Cam Movie Creator allows you to import movies and images to your computer and to edit the movies. In addition, you can add effects (such as Multi View, variable speed playback, and so on) and create time-lapse movies.

For more information about Action Cam Movie Creator, refer to the following website. http://www.sony.net/acmc/