Sony DSX-M80 Operating Instructions

FM/AM

Bluetooth®

Marine Audio

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. DSX-M80

Serial No.

To cancel the demonstration (DEMO) display, see page 10.

To switch the FM/AM tuning step, see page 9. For the connection/installation, see page 14.

Pour annuler l’affichage de démonstration (DEMO), reportez-vous à la page 9.

Pour commuter l’intervalle de syntonisation FM/AM, reportez-vous à la page 8.

Pour le raccordement/l’installation, reportez-vous à la page 14.

5-006-641-11(1)

Operating Instructions

GB

 

 

 

 

Mode d’emploi

FR

 

 

 

 

DSX-M80

Warning

For safety, be sure to install this unit in the dashboard of the boat as the left side of the unit becomes hot during use.

For details, see “Connection/Installation” (page 14).

The nameplate indicating operating voltage, etc., is located on the bottom of the chassis.

The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area) and Switzerland.

WARNING

FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

2GB

This device complies with part 15 of FCC Rules and Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules as this equipment has very low levels of RF energy.

If you have any questions about this product:

Visit: https://www.sony.com/electronics/ support

Contact: Sony Customer Information Service Center at 1-800-222-7669

Write: Sony Customer Information Service Center 12451 Gateway Blvd., Fort Myers, FL 33913

Supplier’s Declaration of Conformity Trade Name: SONY

Model: DSX-M80

Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.

Telephone Number: 858-942-2230

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received,

including interference that may cause undesired operation.

For the State of California, USA only

Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/ perchlorate

Made in Thailand

Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.compliance.sony.de/

Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives

This product has been manufactured by or on behalf of Sony Corporation.

EU Importer: Sony Europe B.V.

Inquiries to the EU Importer or related to product compliance in Europe should be sent to the manufacturer’s authorized representative, Sony Belgium, bijkantoor van Sony Europe B.V., Da Vincilaan 7-D1, 1930 Zaventem, Belgium.

3GB

Disposal of waste batteries and electrical and electronic equipment (applicable in

the European Union and other countries with

separate collection systems)

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbol for lead (Pb) is added if the battery contains more than 0.004% lead.

By ensuring that these products and batteries are disposed of correctly, you will help to prevent potentially negative consequences for the environment and human health which could be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only.

To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end- of-life to the appropriate collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the appropriate collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.

CAUTION

The following frequency 1,606.5 – 1,710 kHz range is not allocated to sound broadcasting in the European Common Allocations table and cannot be used in Europe.

WARNING: Do not ingest

battery, Chemical Burn Hazard.

The remote commander contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Note on the lithium battery

Do not expose the battery to excessive heat such as direct sunlight, fire or the like.

Warning if your boat’s ignition has no ACC position

Be sure to set the AUTO OFF function. The unit will shut off completely and automatically in the set time after the unit is turned off and the clock is displayed (i.e. press and hold OFF for 1 second), which prevents battery drain. If you do not set the AUTO OFF function, press and hold OFF until the display disappears each time you turn the ignition off.

Disclaimer regarding services offered by third parties

Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.

4GB

Important notice

Caution

IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.

Dear customer, this product includes a radio transmitter.

According to UNECE Regulation no. 10, vessel manufacturers may impose specific conditions for installation of radio transmitters into boats.

Please check your boat’s operation manual or contact the manufacturer or your boat dealer, before you install this product.

Emergency calls

This BLUETOOTH boat handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies).

On BLUETOOTH communication

Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident.

where inflammable gas is present, in a hospital, train, airplane, or petrol station

near automatic doors or a fire alarm

This unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology.

We do not take any responsibility for the leakage of information during BLUETOOTH communication.

If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.

5GB

Sony DSX-M80 Operating Instructions

Guide to Parts and Controls

Main Unit and Remote Commander

Main unit

Front panel removed (inner panel)

PTY (program type)

Selects PTY in RDS.

(browse)

Enters the browse mode during playback. (Not available when a USB device in Android™ mode or iPod is connected.)

Front panel release button

SRC (source)

Turns on the power. Changes the source.

OFF

Press and hold for 1 second to turn the source off and display the clock.

Press and hold for more than 2 seconds to turn off the power and the display.

If the unit is turned off and the display disappears, operation by the remote commander is not available.

Control dial

Adjusts the volume.

PUSH ENTER

Enters the selected item.

Press SRC, rotate then press to change the source (timeout in 2 seconds).

MENU

Opens the setup menu.

VOICE

Press and hold for more than 2 seconds to activate voice dial, voice recognition (Android smartphone only), or the Siri function (iPhone only).

Display window

USB port

/ (SEEK –/+)

Tunes in radio stations automatically. Press and hold to tune manually.

/ (prev/next)

/ (fast-reverse/fast-forward)

6GB

(back)

Returns to the previous display.

MODE

Selects the radio bands or function modes.

CALL

Enters the call menu. Receive/end a call. Press and hold for more than 2 seconds to switch the BLUETOOTH signal.

Receptor for the remote commander

Number buttons (1 to 6)

Receives preset radio stations. Press and hold to store stations.

ALBUM /

Skips an album for audio device. Press and hold to skip albums continuously.

(Not available when a USB device in

Android mode or iPod is connected.) Press to thumbs up, or to thumbs down in Pandora®.

(repeat)

(Not available when a USB device in Android mode is connected.)

(shuffle)

(Not available when a USB device in Android mode is connected.)

MIC

Adjusts the microphone settings.

(play/pause)

EXTRA BASS

Reinforces bass sound in synchronization with the volume level.

Press to change the EXTRA BASS setting: [1], [2], [OFF].

AUX input jack

DSPL (display)

Changes display items.

SCRL (scroll)

Press and hold to scroll a display item.

RESET (inner panel)

Restarts the unit (press with a ballpoint pen, etc.).

RM-X232 Remote commander

The VOL (volume) + button has a tactile dot.

SOUND

Opens the SOUND menu directly.

MENU

Press and hold to open the setup menu.

/ / /

Selects a setup item, etc.

ENTER

Enters the selected item.

Press and hold for more than 2 seconds to establish or terminate the “Sony | Music Center” function.

/ (prev/next)

+/– (album +/–)

VOL (volume) +/–

Remove the insulation film before use.

7GB

RM-X11M Marine remote commander (not supplied)

Ⱥ

 

 

Ȱ

ȫ

 

 

ȯ

 

ȫ

Ȼ

 

VOL (volume) +/–

GP (group)/ALBM (album) +/–

Receives stored stations.

Basic Operations

Detaching the Front Panel

You can detach the front panel of this unit to prevent theft.

1Press and hold OFF until the unit

turns off, press the front panel release button , then pull the panel towards you to remove.

Attaching the front panel

8GB

Switching the FM/AM

Tuning Step

Set the FM/AM tuning step of your country. This setting appears only while the source is off and the clock is displayed.

1Press MENU, rotate the control dial to select [GENERAL], then press it.

2Rotate the control dial to select [TUNING STEP], then press it.

3Rotate the control dial to select from [FM50K/AM9K], [FM100K/AM10K] or [FM200K/AM10K], then press it.

Pairing with a BLUETOOTH Device

When connecting a BLUETOOTH device for the first time, mutual registration (called “pairing”) is required. Pairing enables this unit and other devices to recognize each other. This unit can connect two BLUETOOTH devices (two mobile phones, or a mobile phone and an audio device).

1Press MENU, then rotate and press

the control dial to select [BLUETOOTH][PAIRING] [DEVICE 1]/[DEVICE 2]*.

flashes while the unit is in pairing standby mode.

*[DEVICE 1] or [DEVICE 2] will be changed to the paired device name after pairing is complete.

2Perform pairing on the BLUETOOTH device so it detects this unit.

3Select your model name shown in the

display of the BLUETOOTH device*.

When pairing is made, stays lit.

* If passkey input is required on the BLUETOOTH device, input [0000].

9GB

Canceling the

Demonstration Mode

You can cancel the demonstration display which appears when the source is off and the clock is displayed.

1Press MENU, rotate the control dial to select [GENERAL], then press it.

2Rotate the control dial to select [DEMO], then press it.

3Rotate the control dial to select [DEMO-OFF], then press it.

The setting is complete.

4Press (back) twice.

The display returns to normal reception/ play mode.

Updating the Firmware

To update the firmware, visit the support site on the back cover, then follow the online instructions.

Note

During the update, do not remove the USB device.

Additional Information

Precautions

Do not leave the front panel or audio devices brought in inside the boat.

When the unit is turned on, the power antenna (aerial) extends automatically.

Do not splash liquid onto the unit.

Playback order of audio files

Folder (album)

Audio file (track)

Initializing the Unit

Initializing the unit will erase the clock settings and all your settings stored in the backup memory.

[INITIALIZE] appears only while the source is off and the clock is displayed.

1Press MENU, rotate the control dial to select [GENERAL], then press it.

2Rotate the control dial to select [INITIALIZE], then press it.

3Rotate the control dial to select [INIT-YES], then press it.

Note

Initialize the unit before discarding the unit to prevent the leakage of phone information.

About iPod

You can connect to the following iPod models. Update your iPod devices to the latest software before use.

Compatible iPhone/iPod models

Compatible

Bluetooth®

USB

Model

 

 

 

 

 

iPhone XR

 

 

 

 

 

iPhone Xs max

 

 

 

 

 

iPhone Xs

 

 

 

 

 

iPhone X

 

 

 

 

 

iPhone 8

 

 

 

 

 

iPhone 8 Plus

 

 

 

 

 

iPhone 7

 

 

 

 

 

iPhone 7 Plus

 

 

 

 

 

iPhone SE

 

 

 

 

 

iPhone 6s

 

 

 

 

 

10GB

Compatible

Bluetooth®

USB

Model

 

 

 

 

 

iPhone 6s Plus

 

 

 

 

 

iPhone 6

 

 

 

 

 

iPhone 6 Plus

 

 

 

 

 

iPhone 5s

 

 

 

 

 

iPhone 5c

 

 

 

 

 

iPhone 5

 

 

 

 

 

iPhone 4s

 

 

 

 

 

iPod touch

 

 

(6th generation)

 

 

 

 

 

iPod touch

 

 

(5th generation)

 

 

 

 

 

iPod nano

 

 

(7th generation)

 

 

 

 

 

 

Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Please note that the use of this accessory with an Apple product may affect wireless performance.

If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.

Maintenance

Replacing the lithium battery (CR2025) of the remote commander

When the battery becomes weak, the range of the remote commander becomes shorter.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Lithium battery (CR2025) + side up

Note on the lithium battery

Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

Cleaning the connectors

Avoid touching the connectors directly. The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 8) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged.

Note

For safety, do not remove the front panel while driving.

11GB

Specifications

FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.

POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.

AUDIO POWER SPECIFICATIONS

CTA2006 Standard

Power Output: 45 Watts RMS × 4

at 4 Ohms < 1% THD+N

SN Ratio: 80 dBA

(reference: 1 Watt into 4 Ohms)

Radio section

FM

Tuning range:

87.5 MHz – 108.0 MHz (at 50 kHz step)

87.5 MHz – 108.0 MHz (at 100 kHz step)

87.5 MHz – 107.9 MHz (at 200 kHz step) FM tuning step:

50 kHz/100 kHz/200 kHz switchable Usable sensitivity: 8 dBf Signal-to-noise ratio: 73 dB Separation: 50 dB at 1 kHz

AM

Tuning range:

531 kHz – 1,602 kHz (at 9 kHz step)

530 kHz – 1,710 kHz (at 10 kHz step) AM tuning step:

9 kHz/10 kHz switchable Sensitivity: 26 μV

USB Player section

Interface:

USB1 port (front): USB (Hi-speed) USB2 port (rear): USB (Hi-speed)

Maximum current: USB1 port (front): 1 A USB2 port (rear): 1.5 A

The maximum number of recognizable files (tracks): 10,000

Compatible Android Open Accessory protocol (AOA): 2.0

Corresponding codec: MP3 (.mp3)

Bit rate: 8 kbps – 320 kbps (Supports VBR (Variable Bit Rate))

Sampling rate: 16 kHz – 48 kHz WMA (.wma)

Bit rate: 32 kbps – 192 kbps (Supports VBR (Variable Bit Rate))

Sampling rate: 32 kHz, 44.1 kHz, 48 kHz

AAC (.m4a, .mp4)

Bit rate: 8 kbps – 320 kbps Sampling rate: 11.025 kHz – 48 kHz

WAV (.wav)

Bit depth: 16 bit

Sampling rate: 44.1 kHz, 48 kHz FLAC (.flac)

Bit depth: 16 bit, 24 bit Sampling rate: 44.1 kHz, 48 kHz

Supported file system: FAT16, FAT32

Wireless Communication

Communication System: BLUETOOTH Standard version 3.0

Output:

BLUETOOTH Standard Power Class 2 (Max. Conducted +1 dBm)

Maximum communication range*1: Line of sight approx. 10 m (33 ft)

Frequency band:

2.4 GHz band (2.4000 GHz – 2.4835 GHz) Modulation method: FHSS

Compatible BLUETOOTH Profiles*2:

A2DP (Advanced Audio Distribution Profile) 1.3

AVRCP (Audio Video Remote Control Profile) 1.5

HFP (Handsfree Profile) 1.6

PBAP (Phone Book Access Profile) SPP (Serial Port Profile)

Corresponding codec: SBC (.sbc), AAC (.m4a)

*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna (aerial)’s performance, operating system, software application, etc.

*2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.

12GB

Power amplifier section

Output: Speaker outputs

Speaker impedance: 2 Ω/4 Ω – 8 Ω Maximum power output: 100 W × 4 (at 2 Ω/

4 Ω)

General

Power requirements: 12 V DC boat battery (negative ground (earth))

Rated current consumption: 10 A Dimensions:

Approx. 178 mm × 50 mm × 177 mm (7 1/8 in × 2 in × 7 in) (w/h/d)

Mounting dimensions:

Approx. 182 mm × 53 mm × 160 mm (7 1/4 in × 2 1/8 in × 6 3/8 in) (w/h/d)

Mass: Approx. 1.0 kg (2 lb 4 oz) Package contents:

Main unit (1)

Remote commander (1): RM-X232 Parts for installation and connections

(1 set)

Optional accessories/equipment*: SiriusXM Connect Vehicle Tuner: SXV100,

SXV200, SXV300

Marine remote commander: RM-X11M

*Accessories/equipment other than the marine remote commander RM-X11M are not waterproof. Do not subject them to water.

Ask the dealer for detailed information.

Design and specifications are subject to change without notice.

Copyrights

SiriusXM Connect Vehicle Tuner and Subscription sold separately. www.siriusxm.com

Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

Apple, iPhone, iPod, iPod nano, iPod touch, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.

PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, LLC. Used with permission.

Android is a trademark of Google LLC.

13GB

libFLAC

Copyright (C) 2000-2009 Josh Coalson

Copyright (C) 2011-2013 Xiph.Org Foundation

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Connection/Installation

Cautions

Run all ground (earth) leads to a common ground (earth) point.

Do not get the leads trapped under a screw, or caught in moving parts (e.g., seat railing).

Before making connections, turn the boat’s ignition off to avoid short circuits.

Connect the yellow and red power supply leads only after all other leads have been connected.

Be sure to insulate any loose unconnected leads with electrical tape for safety.

Choose the installation location carefully so that the unit will not interfere with normal boating or car driving operations.

Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or near heater ducts.

Select carefully the mounting location to avoid internal damage by water entering the unit. Areas subject to water splashes should be avoided. The Waterproof Car Stereo Cover (not supplied) is recommended.

Use only the supplied mounting hardware for a safe and secure installation.

Note on the power supply lead (yellow)

When connecting this unit in combination with other stereo components, the amperage rating of the boat circuit to which the unit is connected must be higher than the sum of each component’s fuse amperage rating.

Note on installing in boats with a start-stop system

The unit may restart when starting the engine from start-stop. In this case, turn off the start-stop system of your boat.

Mounting angle adjustment

Adjust the mounting angle to less than 30°.

14GB

Loading...
+ 30 hidden pages