Sony DSC-T100 User Manual

Download

Page 1

VCLICK!

Table of contents

Basic Operations

Using functions for shooting

Digital Still Camera

Cyber-shot Handbook

DSC-T100

Before operating the unit, please read this Handbook, “Instruction Manual” and “Cyber-shot Step-up Guide” thoroughly, and retain them for future reference.

Using functions for viewing

Customizing the settings

Viewing images on a TV

Using your computer

Printing still images

Troubleshooting

Others

Index

Page 2

Notes on using your camera

Types of “Memory Stick” that can be used (not supplied)

The IC recording medium used by this camera is a “Memory Stick Duo”. There are two types of “Memory Stick”.

“Memory Stick Duo”: you can use a “Memory Stick Duo” with your camera.

“Memory Stick”: you cannot use a “Memory Stick” with your camera.

Other memory cards cannot be used.

• For details on “Memory Stick Duo”, see page 111.

When using a “Memory Stick Duo” with “Memory Stick” compatible equipment

You can use the “Memory Stick Duo” by inserting it into the Memory Stick Duo Adaptor (not supplied).

• If you do not intend to use the battery pack for a long time, use up the existing charge and remove it from your camera, then store it in a cool, dry place. This is to maintain the battery pack functions.

• For details on the usable battery pack, see page 113.

Carl Zeiss lens

This camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast. The lens for this camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.

Notes on the LCD screen and lens

• The LCD screen is manufactured using extremely high-precision technology so over

99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are normal in the manufacturing process and do not affect the recording in any way.

Black, white, red, blue

or green points

Memory Stick Duo Adaptor

Notes on the battery pack

• Charge the battery pack (supplied) before using the camera for the first time.

• The battery pack can be charged even if it is not completely discharged. Also, even if the battery pack is not fully charged, you can use the partially charged capacity of the battery pack as is.

• Exposing the LCD screen or the lens to direct sunlight for long periods may cause malfunctions. Be careful when placing the camera near a window or outdoors.

• Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction.

• Images may trail across on the LCD screen in a cold location. This is not a malfunction.

• Be careful not to bump the lens, and be careful not to apply force to it.

The pictures used in this Handbook

The photographs used as examples of pictures in this Handbook are reproduced images, and are not actual images shot using this camera.

Page 3

Notes on using your camera .....................................................................2

Basic techniques for better images ...........................................................7

Focus – Focusing on a subject successfully..................................................... 7

Exposure – Adjusting the light intensity ............................................................ 8

Color – On the effects of lighting....................................................................... 9

Quality – On “image quality” and “image size” ............................................... 10

Identifying parts.......................................................................................12

Indicators on the screen..........................................................................14

Changing the screen display ...................................................................18

Using the internal memory ......................................................................19

Basic Operations

Shooting images easily (Auto adjustment mode)....................................20

Viewing images .......................................................................................24

Deleting images.......................................................................................26

Learning the various functions – HOME/Menu........................................28

Menu items..............................................................................................31

Using functions for shooting

Switching the shooting mode ..........................................................32

Shooting images using Scene Selection......................................33

Shooting menu ....................................................................................35

Scene Selection: Using Scene Selection Image Size: Selecting the image size Face Detection: Detecting the face of subject REC Mode: Selecting the continuous shooting method Color Mode: Changing the vividness of the image or adding special effects ISO: Selecting a luminous sensitivity EV: Adjusting the light intensity Metering Mode: Selecting the metering mode Focus: Changing the focus method White Bal: Adjusting the color tones Flash Level: Adjusting the amount of flash light Red Eye Reduction: Reducing the red-eye phenomenon SteadyShot: Selecting the anti-blur mode SETUP: Selecting the shooting settings

Page 4

Table of contents

Using functions for viewing

Playing back images from the HOME screen.............................46

(Single Image): Playing back a single image

(Index Display): Playing back a list of images

(Slide Show): Playing back a series of images

Viewing menu ..................................................................................... 49

(Delete): Deleting images

(Slide Show): Playing back a series of images

(Retouch): Retouching still images after shooting

(Protect): Preventing accidental erasure

DPOF: Adding a Print order mark

(Print): Printing images using a printer (Rotate): Rotating a still image (Select Folder): Selecting the folder for viewing images

Customizing the settings

Customizing the Manage Memory feature and the Settings

........ 55

Manage Memory..........................................................................57

Memory Tool – Memory Stick Tool ....................................................57

Format Create REC.Folder

Change REC.Folder Copy

Memory Tool – Internal Memory Tool ................................................59

Format

Settings........................................................................................... 60

Main Settings – Main Settings 1 ....................................................... 60

Beep Function Guide

Initialize

Main Settings – Main Settings 2 ....................................................... 61

USB Connect COMPONENT

Video Out

Shooting Settings – Shooting Settings 1 ..........................................63

AF Illuminator Grid Line

AF Mode Digital Zoom

Shooting Settings – Shooting Settings 2 ..........................................65

Auto Orientation Auto Review

Clock Settings..................................................................................... 66

Page 5

Table of contents

Language Setting...............................................................................67

Viewing images on a TV

Viewing images on a TV..........................................................................68

Using your computer

Enjoying your Windows computer ...........................................................71

Installing the software (supplied).............................................................73

Copying images to your computer...........................................................74

Viewing image files stored on a computer with your camera (using a

“Memory Stick Duo”) ...............................................................................80

Using the “Picture Motion Browser” (supplied)........................................81

Using the “Music Transfer” (supplied)......................................................87

Using your Macintosh computer..............................................................88

Printing still images

How to print still images ..........................................................................90

Printing images directly using a PictBridge compliant printer .................91

Printing at a shop ....................................................................................94

Troubleshooting

Troubleshooting .......................................................................................96

Warning indicators and messages ........................................................107

Others

To use your camera abroad — Power sources......................................110

On the “Memory Stick” ..........................................................................111

On the battery pack...............................................................................113

On the battery charger ..........................................................................114

Page 6

Table of contents

Index

Index .....................................................................................................115

Page 7

Basic techniques for better images

Focus

Exposure

Color Quality

This section describes the basics so you can enjoy your camera. It tells you how to use various camera functions such as the HOME screen (page 28), the menus (page 30), and so on.

Focusing on a subject successfully

When you press the shutter button halfway down, the camera adjusts the focus automatically (Auto Focus). Remember to press the shutter button only halfway down.

Press the shutter button fully down suddenly.

To shoot a still image difficult to focus on If the image looks blurred even after focusing, it may be because of camera shake.

Press the shutter button halfway down.

t [Focus] (page 41)

AE/AF lock indicator flashing , lit/beeps

Then press the shutter button fully down.

t See

“Hints for preventing blur” (as follows).

Hints for preventing blur

Hold the camera steady, keeping your arms at your side. It is recommended to lean against a tree or a building nearby to steady yourself. Shooting with a 2-second delay self-timer, or using a tripod is also effective. Use the flash when you shoot under a low light condition.

Page 8

Basic techniques for better images

Exposure

You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is the amount of light that the camera will receive when you release the shutter.

Adjusting the light intensity

Shutter speed = Length of time the camera receives

Exposure:

Aperture = Size of the opening allowing light to pass

Overexposure

= too much light Whitish image

Correct exposure

Underexposure

= too little light Darker image

light

through

ISO Sensitivity (Recommended Exposure

= Recording sensitivity

Index)

The exposure is automatically set to the proper value in the auto adjustment mode. However, you can adjust it manually using the functions below.

Adjusting EV:

Allows you to adjust the exposure determined by the camera (page 39).

Metering Mode:

Allows you to change the part of the subject to be measured to determine the exposure (page 40).

Adjusting ISO Sensitivity (Recommended Exposure Index)

ISO sensitivity is a speed rating for recording media that incorporates an image sensor that receives light. Even when the exposure is the same, images differ depending on the ISO sensitivity. To adjust the ISO sensitivity, see page 39.

High ISO sensitivity

Records a bright image even when shooting in a dark location. However, the image tends to become noisy.

Low ISO sensitivity

Records a smoother image. However, when the exposure is insufficient, the image may become darker.

Page 9

Basic techniques for better images

Color

The apparent color of the subject is affected by the lighting conditions.

On the effects of lighting

Example: The color of an image affected by light sources

Weather/lighting

Characteristics of light

The color tones are adjusted automatically in the auto adjustment mode. However, you can adjust color tones manually with [White Bal] (page 43).

Daylight Cloudy Fluorescent Incandescent

White (standard) Bluish Green-tinged Reddish

Page 10

Basic techniques for better images

Quality

On “image quality” and “image size”

A digital image is made up of a collection of small dots called pixels. If it contains a large number of pixels, the picture becomes large, it takes up more memory, and the image is displayed in fine detail. “Image size” is shown by the number of pixels. Although you cannot see the differences on the screen of the camera, the fine detail and data processing time differ when the image is printed or displayed on a computer screen.

Description of the pixels and the image size

1 Image size: 8M

3264 pixels × 2448 pixels = 7,990,272 pixels

2 Image size: VGA

Pixels

640 pixels × 480 pixels = 307,200 pixels

Selecting the image size for use

Pixel

Many pixels (Fine image quality and large file size)

Few pixels (Rough image quality but small file size)

Example: Printing in up to A3 size

Example: An attached image to be sent by email

The default settings are marked with .

Image size Guidelines No. of images Printing

8M (3264×2448) For prints up to A3(11×17") Less

3:2

(3264×2176) Shoot in 3:2 aspect ratio

5M (2592×1944) For prints up to A4(8.5×11")

3M (2048×1536) For prints up to 10x15 cm(4x6") or

VGA (640×480) Shoot at a small image size for e-mail

(1920×1080) Shoot in HDTV aspect ratio

16:9

13x18 cm(5x7")

attachment

Fine

Rough

1) Images are recorded in 3:2 aspect ratio, same as photograph printing paper or postcards, etc.

2) Both edges of the image may be cut off when printing (page 104).

Page 11

Basic techniques for better images

Movie image size Frame/Second Usage guidelines

640(Fine) (640×480) Approx. 30 Shoot high quality movie for display on TV

640(Standard) (640×480) Approx. 17 Shoot standard quality movie for display on

320 (320×240) Approx. 8 Shoot at a small size for email attachment

• The larger the image size, the higher the image quality.

• The more frames per second you played back, the smoother playback can be.

Page 12

Identifying parts

See the pages in parentheses for details of operation.

A Shutter button (20) B Microphone C Flash (21) D AF illuminator (63)/Self-timer lamp

(23)

E Lens F Lens cover

A POWER button B POWER lamp C (Playback) button (24) D LCD screen (18) E For shooting: Zoom (W/T) button (21)

For viewing: (Playback zoom) button/ (Index) button (24)

F Hook for wrist strap G Battery/“Memory Stick Duo” cover H MENU button (30) I Control button

Menu on: v/V/b/B/z (30) Menu off: DISP/ / / (18, 21-23)

J HOME button (28) K Access lamp L “Memory Stick Duo” slot M Battery insertion slot N Battery eject lever

Page 13

Identifying parts

O Multi connector (bottom)

Used in the following situations:

• Making a USB connection between the camera and the computer.

• Making a connection to audio/video input jacks on a TV.

• Making a connection to a PictBridge compliant printer.

P Speaker Q Tripod receptacle (bottom)

• Use a tripod with a screw length of less than

5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods having screws longer than 5.5 mm (7/32 inch), and may damage the camera.

Page 14

Indicators on the screen

Each time you press v (DISP) button, the display changes (page 18). See the pages in parentheses for details of operation.

When shooting still images

When shooting movies

Display Indication

Battery remaining

E Low battery warning (107)

Image size

Shooting mode (Scene Selection)

Shooting mode (Program)

(35)

(32)

Recording mode (37)

Metering mode (40)

SteadyShot (45)

Self-timer (23)

White balance (43)

Face Detection (36)

Vibration warning

• Indicates vibration may prevent you from shooting clear images due to insufficient lighting. Even if the vibration warning appears, you can still shoot images. However, we recommend that you turn on the anti-blur function, using the flash for better lighting or using a tripod or other means to stabilize the camera (page 7).

Zoom scaling (21, 64)

1.3

Color mode

(38)

Page 15

Indicators on the screen

Display Indication

1.0m Focus preset distance (41)

z AE/AF lock (20)

Standby

Standby/Recording a movie

REC

ISO400 ISO number

(39)

NR slow shutter

• When the shutter speed drops below a certain speed in low light conditions, the NR (Noise Reduction) slow shutter function activates automatically to reduce the picture noise.

125 Shutter speed

F3.5 Aperture value

+2.0EV Exposure Value

(39)

00:00:12 Recording time

AF range finder frame

(41)

indicator

Macro/Close Focus (22)

Display Indication

Recording Media

101

Recording folder

• This does not appear when using internal memory.

(57)

96 Remaining number of

recordable images

00:00:00 Remaining recordable time

AF illuminator

(63)

Red-eye reduction (45)

Flash mode (21)

Flash charging

Display Indication

C:32:00 Self-diagnosis display

(107)

+ Spot metering cross hair

(40)

AF range finder frame (41)

Histogram (18)

Page 16

Indicators on the screen

When playing back still images

When playing back movies

Display Indication

Battery remaining

- Protect (52)

VOL. Vo l u m e (24)

DPOF Print order (DPOF) mark

Image size

(35)

(94)

PictBridge connecting (92)

1.3

Zoom scaling (24)

PictBridge connecting (93)

• Do not disconnect the cable for multi-use terminal while the icon is displayed.

Display Indication

N Playback (24)

Playback bar

00:00:12 Counter

101-0012 Folder-file number

2007 1 1 9:30 AM

z STOP

Recorded date/time of the playback image

Guide to play back images

(54)

z PLAY

BACK/

Select images

VOLUME

Adjust volume

Histogram

• appears when histogram

(18)

display is disabled.

Page 17

Indicators on the screen

Display Indication

Playback Media

101

8/8 12/12 Image number/Number of

Change folder

Metering mode (40)

Flash

C:32:00 Self-diagnosis display

Playback folder

• This does not appear when using internal memory.

images recorded in selected folder

• This does not appear when using internal memory.

White balance

(54)

(43)

(107)

ISO400 ISO number (39)

+2.0EV Exposure Value (39)

500 Shutter speed

F3.5 Aperture value

Page 18

Changing the screen display

• If you view images in bright outside light, adjust the brightness of the LCD backlight up. However, the battery power may decrease faster under such condition.

v (DISP) button (Screen display button)

Each time you press the v (DISP) button, the display changes as follows.

Brightness of LCD backlight up

Histogram on

During playback, the image information is displayed.

Histogram display

Indicators off

Indicators on

• When the camera is connected to a TV, the display switches from Histogram on to Indicators off and then to Indicators on.

• The histogram does not appear in the following situations: While shooting

– When the menu is displayed. – When recording movies During playback – When the menu is displayed. – In index mode – When you are using playback zoom. – When you are rotating still images. – During playback of movies

• A large difference in the histogram displayed when shooting and during playback may occur when:

– The flash strobes. – The shutter speed is slow or high.

• The histogram may not appear for images recorded using other cameras.

z Adjusting EV (Exposure Value) by

A histogram is a graph showing the brightness of an image. Press v (DISP) repeatedly to display the histogram inside the screen. The graph display indicates a bright image when skewed to the right side, and a dark image when skewed to the left side.

A Number of pixels B Brightness

displaying a histogram

BrightDark

• The histogram also appears when playing back a single image, but you cannot adjust the exposure.

Page 19

Using the internal memory

The camera has approximately 31 MB of internal memory. This memory is not removable. Even when there is no “Memory Stick Duo” inserted in the camera, you can record images using this internal memory.

• Movies with the image size set to [640(Fine)] cannot be recorded using the internal memory.

When a “Memory Stick Duo” is inserted

[Recording]: Images are recorded on the “Memory Stick Duo”.

[Playback]: Images on the “Memory Stick Duo” are

Internal memory

On image data stored in the internal memory

We recommend that you copy (back up) data without error using one of the following methods.

To copy (back up) data on a “Memory Stick Duo”

Prepare a “Memory Stick Duo” with a capacity of 64 MB or more, then perform the procedure explained in [Copy] (page 58).

To copy (back up) data on a hard disk of your computer

Perform the procedure on pages 74 to 77 without a “Memory Stick Duo” inserted in the camera.

played back. [Menu, Settings, etc.]: Various functions can be

performed on images on the “Memory Stick Duo”.

When there is no “Memory Stick Duo” inserted

[Recording]: Images are recorded using the internal memory.

[Playback]: Images stored in the internal memory are played back.

[Menu, Settings, etc.]: Various functions can be performed on images in the internal memory.

• You cannot copy image data on a “Memory Stick Duo” to the internal memory.

• By connecting the camera and a computer with a cable for multi-use terminal, you can copy data stored in the internal memory to a computer. However you cannot copy data on a computer to the internal memory.

Page 20

Basic Operations

Shooting images easily (Auto adjustment mode)

Macro button

DISP button

Flash button

Shutter button

Zoom button

MENU button

HOME button

Self-timer button

z button

v/V/b/B button

Control button

1 Slide the lens cover downward.

2 Hold the camera steady, keeping your arm at your side.

Position the subject in the center of the focus frame.

3 Shoot with the shutter button.

1Press and hold the shutter button halfway down to focus.

The z (AE/AF lock) indicator (green) flashes, a beep sounds, the indicator stops flashing and remains lit.

2Press the shutter button fully down.

The shutter sounds.

AE/AF lock

Page 21

Shooting images easily (Auto adjustment mode)

Shooting movies

Press HOME button and select (Shooting) and then select [ Movie Mode] (page 28.)

If you shoot a still image of a subject that is difficult to focus on

• The shortest shooting distance is approx. 50 cm (19 3/4 inches) (W)/approx. 80 cm (31 1/2 inches) (T). Shoot in the close-up (Macro) mode or Close Focus mode (page 22) when you shoot a subject closer than the shooting distance.

• When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing slowly and the beep does not sound. In addition, the AF range finder frame disappears. Recompose the shot and focus again.

Subjects difficult to focus on are:

– Distant from the camera and dark – The contrast between the subject and its background is poor. – Seen through glass –Moving fast – Reflective light or with a lustrous finish –Flashing – Backlit

/ Using the zoom

Press to zoom, press to undo the zoom.

• When the zoom scale exceeds 5×, the camera uses the Digital Zoom function.

For details on the [Digital Zoom] settings and the image quality, see page 64.

Flash (Selecting a flash mode for still images)

Press B ( ) on the control button repeatedly until the desired mode is selected.

Basic Operations

(No Indicator): Flash Auto

Strobes when there is insufficient light or backlight (default setting)

: Flash forced on

: Slow synchro (Flash forced on)

The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.

: Flash forced off

• The flash strobes twice. The first time is to adjust the light quantity.

• While charging the flash, is displayed.

Page 22

Shooting images easily (Auto adjustment mode)

Macro/Close Focus (Shooting close-up)

Press b ( ) on the control button repeatedly until the desired mode is selected.

(No Indicator): Macro Off

: Macro On (W side: Approx. 8 cm or farther (3 1/4 inches or farther), T side: Approx. 80 cm or farther

(31 1/2 inches or farther))

:Close focus enabled (Locked to the W side: Approx. 1 to 20 cm (13/32 to 7 7/8 inches))

Macro

• Setting the zoom all the way to the W side is recommended.

• The in-focus range becomes narrow, and the complete subject may not entirely be in focus.

• The Auto Focus speed drops.

Close Focus

• Use this mode to shoot at even closer distances than (Macro) recording.

• The optical zoom is locked to the W side and cannot be used.

• You cannot shoot images in the Burst or Bracket mode (page 37.)

• You cannot use the Face Detection feature when you shoot images in the Close Focus mode.

• When you press the zoom button, the image is enlarged using the digital zoom.

Page 23

Shooting images easily (Auto adjustment mode)

Using the self-timer

Press V ( ) on the control button repeatedly until the desired mode is selected.

(No Indicator): Not using the self-timer

: Setting the 10-second delay self-timer

: Setting the 2-second delay self-timer

Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates.

Self-timer lamp

Basic Operations

To cancel, press

• Use the 2-second delay self-timer to prevent blur of an image made by the shaking of the camera when

pressing the shutter button.

V again.

Page 24

Viewing images

(Playback zoom)

(Index)/

butto n

(Playback)

butto n

MENU button

HOME button

(Playback zoom)

button

z button

v/V/b/B button

Control button

1 Press the (Playback) button.

If you press (Playback) when the camera is powered off, the camera is turned on automatically and set to playback mode. To switch to the shooting mode, press (Playback) again.

2 Select an image with b/B on the control button.

Movie:

Press

z to play back a movie. (Press z again to stop playback.)

Press

b/B to rewind/fast forward. (Press z to return to normal playback.)

Press V to display the volume control screen, then press

• Movies with the image size [320] are displayed a size smaller.

/ To view an enlarged image (playback zoom)

Press while displaying a still image. To undo the zoom, press . Adjust the portion: v/V/b/B Cancel playback zoom: z

• To store enlarged images: [Trimming] (page 51)

b/B to adjust the volume.

Page 25

Viewing images

Viewing an index screen

Press (Index) to display the index screen while a still image is displayed. Select an image with v/V/b/B. To return to the single image screen, press z. When there are a number of folders in the “Memory Stick Duo” inserted in the camera, select the folder selection bar with

• You can also access the index screen by selecting [ Index Display] on the HOME screen.

• Each time you press (Index), the number of pictures on the index screen changes.

b, then select the desired folder with v/V.

Basic Operations

Page 26

Deleting images

(Playback) button

MENU button

z button

v/V/b/B button

Control button

1 Press the (Playback) button.

2 Press MENU while displaying in single-image or index mode.

3 Select [ Delete] with v on the control button.

4 Select the desired deletion method with b/B from among [This Image],

[Multiple Images] and [All In This Folder], and then press z.

When you select [This Image]

Deletes the currently selected image. Select [OK] with v, then press z.

Page 27

Deleting images

When you select [Multiple Images]

Selects and deletes multiple images at once.

1 Select the images you want to delete, then press z.

The (check mark) is checked in the checkbox of the image.

2 Press MENU. 3 Select [OK] with

v, then press z.

When you select [All In This Folder]

Deletes all the images in the selected folder. Select [OK] with v, then press z.

• When the index screen is displayed, you can delete all the images in the folder by selecting

[Multiple Images] and moving the highlight to the folder bar with b, then putting a checkmark in the checkbox of the folder.

Basic Operations

Page 28

Learning the various functions – HOME/Menu

Using the HOME screen

The HOME screen is the basic screen used for accessing the various functions you can access the HOME screen regardless of the shooting/viewing mode.

Control button

z button

v/V/b/B button

HOME button

1 Press HOME to display the HOME screen.

Menu items

The available menu items vary depending on the camera mode. The shooting menu is available only in the shooting mode, and the viewing menu is available only in the playback mode. Also, different items are available depending on the selected shooting mode (such as Auto Adjustment, Scene Selection, Program Auto, Movie Mode) on the HOME screen or on the playback screen.

( : available)

Selected mode: Auto

Adjustment

Menu for shooting (page 35)

Scene Selection — — —

Image Size

Face Detection

REC Mode

Color Mode — —

ISO — — —

Metering Mode — —

Focus — —

White Bal —

Flash Level — — —

Red Eye Reduction

SteadyShot —

SETUP

*The operation is limited according to the selected Scene Selection mode (page 34).

Menu for viewing (page 49)

(Delete) (Slide Show)

(Retouch) (Protect)

DPOF (Print)

(Rotate) (Select Folder)

Scene

Selection

Program

Auto

Movie Mode

——

—

Basic Operations

Page 32

Using functions for shooting

Switching the shooting mode

You can switch the shooting mode on the HOME screen.

Shooting modes:

There are three shooting modes available for still images: Auto Adjustment, Scene Selection, Program Auto; and there is one recording mode for movies. The default setting is Auto Adjustment. To switch the shooting mode to other than Auto Adjustment, follow the procedure described below.

1Press HOME to display HOME screen. 2Select (Shooting) with b/B on the control button. 3Select the desired mode with v/V, then press z.

: Auto Adjustment mode

Allows you to shoot still images with the setting adjusted automatically.

: Scene Selection mode

Allows you to shoot with preset settings according to the scene (page 33).

: Program Auto mode

Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). Also you can select various settings using the menu. (Refer to page 31 for details on the functions available.)

: Movie Mode

Allows you to record movies with audio.

Control buttonHOME button

Page 33

Shooting images using Scene Selection

Scene Selection modes

The following modes are predetermined to match the scene conditions.

High Sensitivity

Allows you to shoot images without a flash under low light conditions, reducing blur.

Soft Snap

Allows you to shoot images with a softer atmosphere for portraits of people, flowers, etc.

Twilight Portrait*

Suitable for shooting portraits in dark places. Allows you to shoot sharp images of people in dark places without losing the dark atmosphere of the surroundings.

Twilight*

Allows you to shoot night scenes at far distance without losing the dark atmosphere of the surroundings.

Landscape

Focuses only on a distant subject to shoot landscapes, etc.

Hi-Speed Shutter

Allows you to shoot moving subjects outdoors or in other bright places.

• The shutter speed becomes faster, so images shot in dark places become darker.

Beach

When shooting seaside or lakeside scenes, the blue of the water is clearly recorded.

Snow

When shooting snowy scenes or other places where the whole screen appears white, use this mode to prevent sunken colors and record clear images.

Fireworks*

Allows you to record fireworks in all their splendor.

Using functions for shooting

* When you shoot images using [Twilight Portrait], [Twilight] or [Fireworks] mode, the shutter speed is

slower. To prevent a blurring, use of a tripod is recommended.

Page 34

Shooting images using Scene Selection

Functions that cannot be combined with Scene Selection

For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera. Some functions are not available, depending on the Scene Selection mode.

( : you can select the desired setting)

Macro/

Close Focus

Flash

/— — — * —

—/— — — — —

/— — — —

/— —

—/— / — —

/— / — —

—/— — — — —

* [Flash] cannot be selected.

Face

Detection

Burst/

Bracket

White

Bal

Red Eye

Reduction

SteadyShot

Page 35

Shooting menu

The functions in shooting mode using the MENU button are described below. For details on how to operate the menu, see page 30.

The available modes are indicated as shown below. You cannot select the mode displayed in grey.

Shooting mode (Auto Adjustment/Scene Selection/Program Auto) Movie Mode

For details on the operation 1 page 30

Available Unavailable

The default settings are marked with .

Scene Selection: Using Scene Selection

Select the still image shooting mode. Allows you to shoot with the preset settings according to the scene (Scene Selection) (page 33).

Image Size: Selecting the image size

For still images

Selects image size for shooting still images. For details, see page 10.

For movie

(Fine)

(Standard)

Selects image size for recording movies. For details, see page 10.

Using functions for shooting

Page 36

Shooting menu For details on the operation 1 page 30

Face Detection: Detecting the face of subject

Selects whether to use the Face Detect function or not.

(On)

Detecting the faces of your subject will also adjust focus, strobe, exposure, white balance, and pre-strobe for red-eye reduction.

Face Detection mark

Face Detection frame

(Off)

• When [Face Detection] is set to [On], you cannot use the Digital Zoom.

• Available only for [Soft Snap] when you select the Scene Selection mode. In this case, the

Does not use Face Detection function.

Face Detection mode is set to [On] as the default.

• Up to 8 faces in your subject can be detected. When you shoot images with [Soft Snap], the

number of faces in your subject that can be detected will be limited to up to 2 faces.

• When more than one face is detected in your subject, the priority for the focus point is

automatically given to one of the persons identified as the main subject by the camera.

• When you press and hold the shutter button halfway down to focus, the frame around the

subject in focus changes to green. If the frame does not change to green, a subject at the same distance as the main subject is also in focus.

• Face Detection may fail, depending on the conditions under which it is used.

Page 37

Shooting menu For details on the operation 1 page 30

REC Mode: Selecting the continuous shooting method

Selects whether the camera performs continuous shooting or not when you press the shutter button.

(Normal)

(Burst)

Does not shoot continuously.

Records up to 100 images in succession when you press and hold down the shutter button.

• The flash is set to (Flash forced off).

BRK ±0.3EV

BRK ±0.7EV

BRK ±1.0EV

Records a series of three images with the exposure values automatically shifted (Exposure Bracket). The larger the bracket step value, the larger the shift of the exposure value.

• When you cannot decide the correct exposure, shoot in the Exposure Bracket mode, shifting the exposure value. You can select the image with the best exposure afterward.

• You cannot shoot in the Exposure Bracket mode, when (Shooting) is set to [ Auto Adjustment].

• The flash is set to (Flash forced off).

Using functions for shooting

On the Burst

• When recording with the self timer, a series of a maximum of five images is recorded.

• The recording interval is approximately 0.46 second. The recording interval is longer, depending on the setting for the image size.

• When the battery level is low, or when the internal memory or “Memory Stick Duo” is full, the Burst stops.

• You may not be able to shoot images in the Burst mode depending on the Scene Selection mode (page 34).

On the Exposure Bracket

• The focus and white balance are adjusted for the first image, and these settings are also used for the other images.

• When the exposure is manually adjusted (page 39), the exposure is shifted based on the adjusted brightness.

• The recording interval is approximately 0.46 second.

• If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step value.

• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene Selection mode (page 34).

Page 38

Shooting menu For details on the operation 1 page 30

Color Mode:

You can change the brightness of the image, accompanied by effects.

Changing the vividness of the image or adding special effects

(Normal)

(Vivid)

(Natural)

(Sepia)

Sets the image to bright and deep color.

Sets the image to quiet color.

Sets the image to sepia color.

(B & W)

• You can select only [Normal], [B & W] or [Sepia] when shooting movies.

Sets the image to monochromatic color.

Page 39

Shooting menu For details on the operation 1 page 30

ISO: Selecting a luminous sensitivity

High ISO sensitivityLow ISO sensitivity

Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity.

Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality.

• For details on the ISO sensitivity, see page 8.

• Note that the image tends to become noisier as the ISO sensitivity number increases.

• [ISO] is set to [ISO AUTO] in the Scene Selection mode.

• You can select only from [ISO AUTO], [ISO 80] to [ISO 400] when set to Burst or Exposure Bracket.

• When shooting under brighter conditions, the camera automatically increases its tone reproduction and helps prevent images to become whitish (excluding when [ISO] is set to [ISO 80]).

Using functions for shooting

EV: Adjusting the light intensity

Manually adjusts the exposure.

Tow a rd +Tow a rd –

–2.0EV

0EV

+2.0EV

• For the details on the exposure, see page 8.

• The compensation value can be set in 1/3EV increments.

• If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective.

Toward –: Darkens an image.

The exposure is determined automatically by the camera.

Toward +: Brightens an image.

Page 40

Shooting menu For details on the operation 1 page 30

Metering Mode: Selecting the metering mode

Selects the metering mode that sets which part of the subject to measure to determine the exposure.

(Multi)

(Center)

(Spot)

(Only for still image)

• For the details on the exposure, see page 8.

• When using spot metering or center-weighted metering, setting [Focus] to [Center AF] is recommended to focus on the metering position (page 41).

Divides into multiple regions and measures each region. The camera determines a well-balanced exposure (Multi-pattern metering).

Measures the center of the image, and determines the exposure based on the brightness of the subject there (Centerweighted metering).

Measures only a part of the subject (Spot metering).

• This function is useful when the subject is backlit or when there is strong contrast between the subject and the background.

Spot metering cross hairs

Positions on the subject

Page 41

Shooting menu For details on the operation 1 page 30

Focus: Changing the focus method

You can change the focus method. Use the menu when it is difficult to get the proper focus in auto focus mode.

(Multi AF)

Focuses on a subject in all ranges of the finder frame automatically.

• This mode is useful when the subject is not in the center of the frame.

AF range finder frame (Only for still image)

AF range finder frame indicator

Using functions for shooting

(Center AF)

(Only for still image)

(Spot AF)

(Only for still image)

1.0 m

3.0 m

7.0 m

(unlimited distance)

Focuses on a subject in the center of the finder frame automatically.

• Using together with the AF lock function lets you shoot in the desired image composition.

AF range finder frame

AF range finder frame indicator

Focuses on an extremely small subject or a narrow area automatically.

• Using together with the AF lock function lets you shoot in the desired image composition. Hold the camera steady not to misalign the subject and the AF range finder frame.

AF range finder frame

AF range finder frame indicator

Focuses on the subject using a previously set distance to the subject. (Focus preset)

• When shooting a subject through a net or through window glass, it is difficult to get the proper focus in auto focus mode. In these cases, use of [Focus] is convenient.

Page 42

Shooting menu For details on the operation 1 page 30

• AF stands for Auto Focus.

• Distance setting information in [Focus preset] is approximate. If you point the lens up or down, the error increases.

• When you use Digital Zoom or AF illuminator, the normal AF range finder frame is disabled and a new AF range finder frame is displayed by a dotted line. In this case, the priority of AF movement is given to subjects around the center of the frame.

z If the subject is out of focus

When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF] or [Spot AF], the camera may not focus on a subject at the edge of the frame.

In such cases, do as follows.

1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter

button halfway down to focus on the subject (AF lock).

AF range finder frame

AE/AF lock indicator

As long as you do not press the shutter button fully down, you can retry the procedure as many times as you want.

2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot,

and press the shutter button fully down.

Page 43

Shooting menu For details on the operation 1 page 30

White Bal: Adjusting the color tones

Adjusts the color tones according to the lighting condition in a situation, for example, when the colors of an image look strange.

(Auto)

(Daylight)

Adjusts the White Balance automatically.

Adjusts for outdoors conditions on a fine day, evening views, night scenes, neon signs, fireworks, etc.

Using functions for shooting

(Cloudy)

(Fluorescent Light 1)/

(Fluorescent Light 2)/ (Fluorescent Light 3)

n (Incandescent)

Adjusts for a cloudy sky or a shady location.

Fluorescent Light 1: Adjust for white fluorescent lighting. Fluorescent Light 2: Adjust for natural white fluorescent lighting. Fluorescent Light 3: Adjust for day white fluorescent lighting.

Adjusts for places under incandescent lamp, or under bright lighting, such as in a photo studio.

Page 44

Shooting menu For details on the operation 1 page 30

(Flash)

• For details on the white balance, see page 9.

• Under fluorescent lights that flicker, the white balance function may not work correctly even though you select [Fluorescent Light 1], [Fluorescent Light 2], [Fluorescent Light 3].

• Except in [Flash] modes, [White Bal] is set to [Auto] when the flash strobes.

• Some options are not available depending on the Scene Selection mode (page 34).

Adjusts for the flash conditions.

• You cannot select this item when shooting movies.

Flash Level: Adjusting the amount of flash light

Adjusts the amount of flash light.

(–)

Toward –: Makes the flash level lower.

(Normal)

(+)

• To change flash mode, see page 21.

Toward +: Makes the flash level higher.

Page 45

Shooting menu For details on the operation 1 page 30

Red Eye Reduction: Reducing the red-eye phenomenon

The flash strobes two or more times before shooting to reduce the red-eye phenomenon when using the flash.

(Auto)

(On)

(Off)

• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of vibration. Also, do not let the subject move.

• Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions. In such a case, you can correct the red-eye phenomenon using [Retouch] in the viewing menu after shooting (page 49).

• This setting is not available depending on the Scene Selection mode (page 34).

• If you set [Face Detection] to [Off], the Red Eye Reduction does not work, even when you select [Auto].

When [Face Detection] is set to [On], the flash strobes automatically to reduce the red-eye phenomenon.

The flash always strobes to reduce the red-eye phenomenon.

Does not use Red Eye Reduction.

SteadyShot: Selecting the anti-blur mode

Selects the anti-blur mode.

(Shooting)

(Continuous)

(Off)

• When [ Auto Adjustment] mode is selected, [SteadyShot] is set to [Shooting].

• For movies, the options are limited to [Continuous] and [Off]. The default setting is set to [Continuous].

• The anti-blur function may not work properly in the following cases. – When camera shake is too strong – When the shutter speed is slow, for example, shooting night scenes

Activates the anti-blur function when pressing the shutter button halfway down.

Always activates the anti-blur function. You can stabilize images even when zooming up a far subject.

• Battery consumption is faster than in [Shooting] mode.

Does not use anti-blur mode.

Using functions for shooting

SETUP: Selecting the shooting settings

Select the settings for the shooting function. This items appearing in this menu are same ones as those in (Shooting Settings) on the HOME screen. See page 29.

Page 46

Using functions for viewing

Playing back images from the HOME screen

You can playback images using the HOME screen.

HOME button

1 Press HOME. 2 Select (View Images) with b/B on the control button. 3 Select the desired viewing method with v/V.

(Single Image): Playing back a single image

Displays the image shot last. This is the same as pressing the (Playback) (page 24).

(Index Display): Playing back a list of images

This is the same as pressing the (Index) (page 25). Displays a list of images contained in the selected folder.

(Slide Show): Playing back a series of images

1 Select [ Slide Show].

2 Select [Start] with v

/V, then press z to start playback.

To pause the slide show

Press z on the control button. To restart, select [Continue] with

• The slide show resumes from the image which was paused, however, the music starts again from the beginning.

v/V, then press z.

To display the previous/next image

Press b/B while the slide show is paused.

To adjust the volume of the music

Press V to display the volume control screen, then press b/B to adjust the volume.

Page 47

Playing back images from the HOME screen

To end the slide show

Select [Exit] with v/V while the slide show is paused, then press z.

To change the setup

The default settings are marked with .

Image

Only when a “Memory Stick Duo” (not supplied) is inserted in the camera.

Folder

All

Effects

Simple

Nostalgic

Stylish

Active

Normal

• Only still images are displayed when [Simple], [Nostalgic], [Stylish] or [Active] is selected.

• Music is not played (set to [Off]) during a [Normal] slide show. The sound of movies will be heard.

Plays back all the images in the selected folder.

Plays back all the images in a “Memory Stick Duo” in order.

A simple slide show suitable for a wide range of scenes.

A moody slide show reproducing the atmosphere of a movie scene.

A stylish slide show proceeding at a middle tempo.

A high-tempo slide show suitable for active scenes.

A basic slide show switching images at a predetermined interval.

Using functions for viewing

Music

The preset-Music differs depending on the effect you select.

Music1

Music2

Music3

Music4

Off

The default setting for a [Simple] slide show.

The default setting for a [Nostalgic] slide show.

The default setting for a [Stylish] slide show.

The default setting for a [Active] slide show.

Setting for a [Normal] slide show. No Music available.

Page 48

Playing back images from the HOME screen

Interval

3 sec

Sets the display interval of images for a [Normal] slide show.

5 sec

10 sec

30 sec

1 min

Auto

Repeat

Off

z To add /change Music files

You can transfer a desired music file from your CDs or MP3 files to the camera to play back during Slide show. You can transfer music using [ Music Tool] in (Printing, Other) on the HOME screen and the “Music Transfer” software (supplied) installed on a computer. For details, see pages 87 and 89.

• You can record up to four pieces of music on the camera (The four preset pieces (Music1-Music4) can be replaced with the ones you transferred).

• A maximum length of each music file for music playback of the camera is 180 seconds.

• If you cannot play back a Music file due to damage or other malfunctions to the file, execute [Format Music] (page 87) and transfer the music again.

The interval is set to suit the selected [Effects] item. The setting is fixed to [Auto] when [Normal] is not selected

as the [Effects].

Plays back images in a continuous loop.

After all the images have been played back, the slide show ends.

Page 49

Viewing menu

This section explains the menu items available when you press the MENU button in playback mode. For details on how to use the menu, see page 30.

For details on the operation 1 page 30

(Delete): Deleting images

Selects and deletes images on the single-image screen or the index screen. See page 26.

(This Image)

(Multiple Images)

(All In This Folder)

Deletes the currently selected image.

Selects and deletes multiple images.

Deletes all the images in the selected folder.

(Slide Show): Playing back a series of images

This item has same function as (Slide Show) on the HOME screen. See page 46.

(Retouch): Retouching still images after shooting

Allows you to make adjustments of a still image or apply special effects to a still image. The original image is retained.

(Soft Focus)

Blur the periphery around a chosen point

1 Set the center point of the desired image to retouch with v/V/

b/B, then press MENU button.

2 Select [Level] with v/V and press z, adjust level of retouch

with v/V, then press z again.

3 Adjust the desired range to retouch with W/T button. 4 Select [OK] and press z.

Using functions for viewing

Page 50

Viewing menu For details on the operation 1 page 30

(Partial Color)

(Fisheye Lens)

(Cross Filter)

Surround a chosen point in monochrome

1 Set the center point of the desired image to retouch with v/V/

b/B, then press MENU button.

2 Adjust the desired range to retouch with W/T button. 3 Select [OK] and press z.

Apply a fisheye effect around a chosen point

1 Set the center point of the desired image to retouch with v/V/

b/B, then press MENU button.

2 Select [Level] with v/V and press z, adjust level of retouch

with v/V, then press z again.

3 Select [OK] and press z.

Add a starburst effect to bright points in the image

1 Select [Level] with v/V and press z, adjust level of retouch

with v/V, then press z again.

2 Adjust the desired length to retouch with W/T button. 3 Select [OK] and press z.

Page 51

Viewing menu For details on the operation 1 page 30

(Trimming)

(Red Eye Correction)

When you select [Trimming]

• The image size that you can trim may vary depending on the image.

• The quality of trimmed images may deteriorate.

Crop images to remove unwanted portions

1 Press W/T button to zoom in on the trimming range. 2 Set the point with v/V/b/B, then press MENU button. 3 Select [Image Size] with v/V and press z.

Select the image size to be used to save the image, then press z.

4 Select [OK] and press z.

Removes red eye caused by flash Select [OK] with v/V and press z.

• You may not be able to remove the red eye effect, depending on the image.

Using functions for viewing

Page 52

Viewing menu For details on the operation 1 page 30

(Protect): Preventing accidental erasure

Protects images against accidental erasure.

(This Image)

(Multiple Images)

Protects/unlocks the currently selected image.

Selects and protects/unlocks multiple images.

To protect an image

1 Display the image you want to protect, or select the images on the index screen. 2 Press MENU to display the menu. 3 Select (Protect) with v/V, and select [This Image] with b/B, then press z.

The image is protected and the - (Protect) indicator appears on the image.

To select and protect images

1 Press MENU to display the menu. 2 Select (Protect) with v/V, and select [Multiple Images] with b/B, then press z.

In single-image mode:

3 Select the image you want to protect with b/B on the control button, then press z.

A is attached to the selected image.

4 Press b/B to display other images you want to protect, then press z. 5 Press MENU. 6 Select [OK] with v, then press z.

In index mode:

3 Select the image you want to protect with v/V/b/B on the control button, then press z.

A is attached to the selected image.

4 Move the highlight to the folder selection bar with b and select the folder that contains the

images you want to protect with v/V. Repeat step 3 to select other images.

5 To select all the images in the folder, press z in step 4.

A is attached to the selected folder.

6 Press MENU. 7 Select [OK] with v, then press z.

A - (Protect) indicator appears on the selected images.

Page 53

Viewing menu For details on the operation 1 page 30

To cancel the protection

Select the image for which you want to cancel protection, and unlock it by performing the same procedure to protect it.

- (Protect) indicator disappears.

The

• Note that the formatting erases all the data stored on the recording media, even if the images

are protected, and these images cannot be restored.

• It may take some time to protect an image.

DPOF: Adding a Print order mark

Adds a DPOF (Print order) mark to images you want to print (page 94).

(This Image)

(Multiple Images)

Attaches/clears the DPOF-based print marks to (from) the currently selected image.

Selects images and attaches/clears the DPOF-based print marks to (from) the images.

(Print): Printing images using a printer

See page 91. The menu operation is the same procedure as the one used when selecting this item from the HOME screen.

(Rotate): Rotating a still image

Rotates a still image.

1 Display the image to be rotated. 2 Press MENU to display the menu. 3 Select (Rotate) with v/V on the control button, then press z. 4 Select [ 5 Select [OK] with v/V, then press z.

• You cannot rotate protected images or movies.

• You may not be able to rotate images shot with other cameras.

• When viewing images on a computer, the image rotation information may not be reflected depending on the software.

], then rotate the image with b/B.

Using functions for viewing

Page 54

Viewing menu For details on the operation 1 page 30

(Select Folder): Selecting the folder for viewing images

Selects the folder containing the image you want to play back when using the camera with “Memory Stick Duo”.

1 Select the desired folder with b/B on the control button.

2 Select [OK] with v, then press z.

To cancel selecting the folder selection

Select [Exit] in step 2, then press z.

z On the folder

The camera stores images in a specified folder of a “Memory Stick Duo”. You can change the folder or create a new one.

• To create a new folder t [Create REC.Folder] (page 57)

• To change the folder for recording images t [Change REC.Folder] (page 58)

• When multiple folders are created in the “Memory Stick Duo” and the first or last image in the folder is displayed, the following indicators appear.

: Moves to the previous folder. : Moves to the next folder. : Moves to either the previous or next folders.

Page 55

Customizing the settings

Customizing the Manage Memory feature and the Settings

You can change the default settings using (Manage Memory) or (Settings) on the HOME screen.

Control button

z button

v/V/b/B button

HOME button

1 Press HOME to display the HOME screen.

2 Select (Manage Memory) or (Settings) with b/B on the control button.

Customizing the settings

3 Select the desired item with v/V, then press z.

4 Move the highlight to the item selection area with B, and select the desired

item with v/V, then press z.

Page 56

Customizing the Manage Memory feature and the Settings

For details on the operation 1 page 55

5 Select the desired setting with v/V, then press z.

To cancel the setting change

Select [Cancel] if it is one of the setting item, then press z. If not, press b.

• This setting is maintained even when the power is turned off.

• To switch to the shooting mode, press the shutter button halfway down.

Page 57

Manage Memory

For details on the operation 1 page 55

Memory Tool – Memory Stick Tool

This item appears only when a “Memory Stick Duo” is inserted in the camera.

Format

Formats the “Memory Stick Duo”. A commercially available “Memory Stick Duo” is already formatted, and can be used immediately.

• Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected images.

1 Select [Format] with v/V/b/B on the control button, then press z.

The message “All data on Memory Stick will be erased” appears.

2 Select [OK] with v, then press z.

The format is complete.

To cancel the formatting

Select [Cancel] in step 2, then press z.

Create REC.Folder

Creates a folder in a “Memory Stick Duo” for recording images.

1 Select [Create REC.Folder] with v/V/b/B on the control button, then press z.

The folder creation screen appears.

Customizing the settings

2 Select [OK] with v, then press z.

A new folder is created with a number incremented one higher than the largest number, and the folder becomes the current recording folder.

To cancel the folder creation

Select [Cancel] in step 2, then press z.

• When not creating a new folder, the “101MSDCF” folder is selected as the recording folder.

• You can create folders designated up to “999MSDCF.”

• Images are recorded in the newly created folder until a different folder is created or selected.

• You cannot delete a folder with the camera. To delete a folder, use your computer, etc.

• Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created.

• For details, see “Image file storage destinations and file names” (page 79).

Page 58

Manage Memory For details on the operation 1 page 55

Change REC.Folder

Changes the folder currently used for recording images.

1 Select [Change REC.Folder] with v/V/b/B on the control button, then press z.

The folder selection screen appears.

2 Select the desired folder with b/B, and [OK] with v, then press z.

To cancel changing the recording folder

Select [Cancel] in step 2, then press z.

• You cannot select the “100MSDCF” folder as a recording folder.

• You cannot move recorded images to a different folder.

Copy

Copies all images in the internal memory to a “Memory Stick Duo”.

1 Insert a “Memory Stick Duo” having 64 MB or larger capacity. 2 Select [Copy] with v/V/b/B on the control button, then press z.

The message “All data in internal memory will be copied” appears.

3 Select [OK] with v, then press z.

Copying starts.

To cancel the copying

Select [Cancel] in step 3, then press z.

• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.

• You cannot copy individual images.

• The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in [ Internal Memory Tool] (page 59).

• When you copy the data in the internal memory to the “Memory Stick Duo”, all the data will be copied. You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be copied.

• Even if you copy data, a DPOF (Print order) mark is not copied.

Page 59

Manage Memory For details on the operation 1 page 55

Memory Tool – Internal Memory Tool

This item does not appear when a “Memory Stick Duo” is inserted in the camera.

Format

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1 Select [Format] with v/V/b/B on the control button, then press z.

The message “All data in internal memory will be erased” appears.

2 Select [OK] with v, then press z.

The format is complete.

To cancel the formatting

Select [Cancel] in step 2, then press z.

Customizing the settings

Page 60

Settings

For details on the operation 1 page 55

Main Settings – Main Settings 1

The default settings are marked with .

Beep

Selects the sound produced when you operate the camera.

Shutter

Off

Function Guide

When you operate the camera, the description of functions is displayed.

Off

Initialize

Initializes the setting to the default setting. The images stored in the internal memory are retained.

1 Select [Initialize] with v/V/b/B, then press z.

The message “Initialize all settings” appears.

2 Select [OK] with v, then press z.

The settings are reset to the default setting.

To cancel the resetting

Select [Cancel] in step 2, then press z.

• Make sure that the power is not disconnected during resetting.

Turns on the shutter sound when you press the shutter button.

Turns on the beep/shutter sound when you press the control button/ press the shutter button.

Turns off the beep/shutter sound.

Displays the function guide.

Does not display the function guide.

Page 61

Settings For details on the operation 1 page 55

Main Settings – Main Settings 2

The default settings are marked with .

USB Connect

Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the cable for multi-use terminal.

PictBridge

Mass Storage

Auto

Connects the camera to a PictBridge compliant printer (page 91). Or, when you connect the camera to a computer, the copy wizard starts automatically, and the images in the recording folder on the camera are copied to the computer (compatible with the computer installed Windows XP, Mac OS X).

Establishes a Mass Storage connection between the camera and a computer or other USB device (page 75).

The camera recognizes automatically and sets up communication with a computer or PictBridge compliant printer (pages 75 and 91).

• If the camera and a PictBridge compliant printer cannot be connected when set to [Auto], change the setting to [PictBridge].

• If the camera and a computer or other USB device cannot be connected when set to [Auto], change the setting to [Mass Storage].

Customizing the settings

COMPONENT

Selects the video signal output type from SD and HD(1080i), according to the TV connected. See page 69.

HD(1080i)

Select this item to connect the camera to a 1080i-capable High Definition TV.

Select this item to connect the camera to a TV that is not compatible with an HD(1080i) signal.

Page 62

Settings For details on the operation 1 page 55

Video Out

Sets the video signal output according to the TV color system of the connected video equipment. Different countries and regions use different TV color systems. If you want to view images on a TV screen, check page 70 for the TV color system of the country or region where the camera is used.

NTSC

PAL

Sets the video output signal to NTSC mode (e.g., for the USA, Japan).

Sets the video output signal to PAL mode (e.g., for Europe).

Page 63

Settings For details on the operation 1 page 55

Shooting Settings – Shooting Settings 1

The default settings are marked with .

AF Illuminator

The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings. The AF illuminator emits red light allowing the camera to focus easily when the shutter button is pressed halfway, until the focus is locked. The indicator appears at this time.

Auto

Off

• If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will not be achieved. (A distance of up to approximately 2.7 m (8 feet 10 3/8 inches) (zoom: W) / 2.0 m (6 feet 6 3/4 inches) (zoom: T) is recommended.)

• Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the center of the subject.

• When Focus preset is set (page 41), AF Illuminator does not function.

• When you use AF illuminator, the normal AF range finder frame is disabled and new AF range finder frame is displayed by a doted line. In this case, AF operates with priority on subjects located near the center of the frame.

• The AF illuminator does not operate when [Twilight], [Landscape], [Hi-Speed Shutter] or [Fireworks] mode is selected in the Scene Selection mode.

• The AF illuminator emits very bright light. Although there are no problems with safety, do not look directly into the AF illuminator emitter at close range.

• When [Face Detection] is set to [On], AF Illuminator does not function.

Uses the AF illuminator.

Does not use AF illuminator.

Customizing the settings

Grid Line

With reference to the grid lines, you can easily set a subject in a horizontal/vertical position.

Off

• The grid lines are not recorded on the image.

Displays grid lines.

Does not display grid lines.

Page 64

Settings For details on the operation 1 page 55

AF Mode

Selects the auto focus operation mode.

Single

Monitor

• When [Face Detection] is set to [On], [AF Mode] does not work.

Automatically adjusts the focus when the shutter button is pressed and held halfway down. This mode is useful for shooting stationary subjects.

Automatically adjusts the focus before the shutter button is pressed and held halfway down. This mode shortens the time needed for focusing.

• Battery consumption is faster than in [Single] mode.

Digital Zoom

Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 5×). When the zoom scale exceeds 5×, the camera uses either smart or precision digital zoom.

Smart (Smart Zoom) ()

Precision (Precision Zoom) ()

Off

Enlarges the image digitally with almost no distortion. This is not available when the image size is set to [8M] or [3:2].

• The maximum zoom scale of Smart zoom is shown in the following table.

Enlarges all image sizes up to a maximum of 10×, but the image quality deteriorates.

Does not use the digital zoom.

Image size and maximum zoom scale using Smart zoom

Size Maximum zoom scale

5M Approx. 6.3×

3M Approx. 8.0×

VGA Approx. 25×

16:9 Approx. 8.5×

• When [Face Detection] is set to [On], you cannot use the Digital Zoom.

Page 65

Settings For details on the operation 1 page 55

Shooting Settings – Shooting Settings 2

The default settings are marked with .

Auto Orientation

When the camera is rotated to shoot a portrait image, the camera records its position change and displays the image in the portrait position.

Off

• Depending on the camera’s recording angle, the image may be recorded with incorrect orientation. In this case, you can rotate the image, referring to page 53.

Auto Review

Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image.

Off

• If you press the shutter button halfway down during this period, the recorded image display disappears and you can immediately shoot the next image.

Records the image with the correct orientation.

Auto Orientation deactivated.

Use the Auto Review.

Does not use Auto Review.

Customizing the settings

Page 66

Settings For details on the operation 1 page 55

Clock Settings

Sets the date and time.

1 Press HOME and select [ Clock Settings] from (Settings) on the HOME screen.

2 Select the date display format with v/V, then press z. 3 Select each item with b/B and set the numeric value with v/V, then press z. 4 Select [OK], then press z.

To cancel the clock setting

Select [Cancel], then press z.

Page 67

Settings For details on the operation 1 page 55

Language Setting

Selects the language to be used to display the menu items, warnings, and messages.

Customizing the settings

Page 68

Viewing images on a TV

You can view images on a TV screen by connecting the camera to a TV. The connection varies according to the type of TV the camera is connected to.

Viewing images by connecting your camera to a TV with the supplied cable

Turn off both your camera and the TV before connecting the camera and the TV.

1 Connect the camera to the TV.

1 To audio/video

input jacks

VIDEO AUDIO

Yellow Black

(Playback) button

Control button

Cable for multi-use terminal (supplied)

• Place the camera with the screen facing upwards.

• If your TV has stereo input jacks, connect the audio plug (black) of the cable for multi-use terminal to the left audio jack.

2 To the multi

connector

2 Turn on the TV and set the TV/video input switch to “video.”

• For details, see the operating instructions supplied with the TV.

3 Press to turn on the camera.

Images shot with the camera appear on the TV screen.

Press b/B on the control button to select the desired image.

• When using your camera abroad, it may be necessary to switch the video signal output to match that of your TV system (page 62).

Page 69

Viewing images on a TV

Viewing images by connecting your camera to a HD TV

You can view images by connecting the camera to an HD (High Definition) TV with the component cable (not supplied).

Turn off both your camera and the TV before connecting the camera and the TV.

1 Connect the camera to the TV.

1 To audio/video

input jacks

COMPONENT

VIDEO IN AUDIO

White/Red

Green/Blue/Red

button

Control button

Component cable (not supplied)

2 To the multi

connector

• Place the camera with the screen facing upwards.

• The cable for video jacks (Green/Blue/Red) is the same color as the respective jacks.

HOME button

2 Turn on the TV and set the TV/video input switch to “video.”

• For details, see the operating instructions supplied with the TV.

3 Press to turn on the camera.

Images shot with the camera appear on the TV screen.

Press b/B on the control button to select the desired image.

(Playback)

Viewing images on a TV

Page 70

Viewing images on a TV

• Set [COMPONENT] to [HD(1080i)] in [ Main Settings 2] by selecting (Settings) on the HOME screen (page 61).

• When using your camera abroad, it may be necessary to switch the video signal output to match that of your TV system (page 62).

• You cannot view movies output in HD signal format.

On TV color systems

If you want to view images on a TV screen, you need a TV with a video input jack and the cable for multi-use terminal. The color system of the TV must match that of your digital still camera. Check the following lists for the TV color system of the country or region where the camera is used.

NTSC system

Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc.

PAL system

Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc.

PAL-M system

Brazil

PAL-N system

Argentina, Paraguay, Uruguay

SECAM system

Bulgaria, France, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc.

Page 71

Using your computer

Enjoying your Windows computer

For details on using a Macintosh computer, refer to “Using your Macintosh computer” (page 88). This section describes the English version of screen contents.

• Under Windows Vista, some names and operations may differ from those described below.

Install the software (supplied) first (page 73)

Copying images to your computer (page 74)

•

Viewing images on your computer

Enjoying images using the “Picture Motion Browser” and “Music Transfer” (pages 81 and 87)

• Viewing images saved on your computer

• Viewing photos organized by date

• Editing images

• Adding/changing Music using “Music Transfer”

• Show the location of still images shot on the map (requires

an internet connection)

• Creates a disc with the images shot (requires CD or DVD

disc writing drive)

• Insert the date on the images and saves or prints them

Using your computer

Page 72

Enjoying your Windows computer

Recommended computer environment

The following environment is recommended for a computer connected to the camera.

Recommended environment for copying images

OS (pre-installed): Microsoft Windows

2000 Professional, Windows XP* or Windows Vista*

• Operation is not assured in an environment based on an upgrade of the operating systems described above or in a multi-boot environment.

USB jack: Provided as standard

Recommended environment for using “Picture Motion Browser” and “Music Transfer”

OS (pre-installed): Microsoft Windows

2000 Professional, Windows XP*

Sound card: 16-bit stereo sound card with

speakers

CPU/Memory: Pentium III 500 MHz or

faster, 128 MB of RAM or more (Recommended: Pentium III 800 MHz or faster and 256 MB of RAM or more)

Software: DirectX 9.0c or later

Hard Disk: Disk space required for

installation—200 MB or more

Display: Screen resolution: 1024 × 768 dots

or more Colors: High Color (16-bit color) or more

* 64-bit editions and Starter (Edition) are not

supported.

• The software is compatible with DirectX technology. Installation of “DirectX” may be required.

Notes on connecting your camera to a computer

• Operations are not guaranteed for all the recommended computer environments mentioned above.

• If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate, depending on the types of USB devices you are using.

• Operations are not guaranteed when using a USB hub.

• Connecting your camera using a USB interface that is compatible with Hi-Speed USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this camera is compatible with HiSpeed USB (USB 2.0 compliant).

• There are three modes for a USB connection when connecting a computer, [Auto] (default setting), [Mass Storage] and [PictBridge] modes. This section describes the [Auto] and [Mass Storage] as examples. For details on [PictBridge], see page 61.

• When your computer resumes from a suspend or sleep mode, communication between your camera and your computer may not recover at the same time.

Technical Support

Additional information on this product and answers to frequently asked questions can be found at the Sony Customer Support Website. http://www.sony.net/

Page 73

Installing the software (supplied)

You can install the software (supplied) using the following procedure.

• When using Windows 2000, do not connect the camera to the computer before installation.

• In Windows 2000/XP, log on as Administrator.

• When the supplied software is installed, the USB driver is installed automatically.

1 Turn on your computer, and insert

the CD-ROM (supplied) into the CD-ROM drive.

The installation menu screen appears.

• If it does not appear, double-click (My Computer)

• Under Windows Vista, the AutoPlay screen may appear. Select “Run Install.exe.” and follow the instructions that appear on the screen to proceed with the installation.

t (SONYPICTUTIL).

2 Click [Install].

The “Choose Setup Language” screen appears.

The “License Agreement” screen appears. Read the agreement carefully. If you accept the terms of the agreement, click the radio button next to [I accept the terms of the license agreement] and then click [Next].

5 Follow the instructions on the

screen to complete the installation.

• When the restarting confirmation message appears, restart the computer following the instructions on the screen.

• DirectX may be installed depending on system environment of your computer.

6 Remove the CD-ROM after the

installation is complete.

After you install the software, a shortcut icon for the customers registration website is created on the desktop.

Once you register on the website, you can get secure and useful customer support. http://www.sony.net/registration/di

Using your computer

3 Select the desired language, then

click [Next].

The [Location Settings] screen appears.

4 Select the [Region] and [Country/

Area], then click [Next].

When the [Welcome to the Install Shield Wizard for Sony Picture Utility] appears, click [Next].

Page 74

Copying images to your computer

This section describes the process using a Windows computer as an example. You can copy images from the camera to your computer as follows.

For a computer with a Memory Stick slot

Remove the “Memory Stick Duo” from the camera and insert it in the Memory Stick Duo Adaptor. Insert the Memory Stick Duo Adaptor in the computer and copy the images.

• Even when you are using Windows 95/98/98 Second Edition/NT/Me, you can copy images by inserting the “Memory Stick Duo” into the Memory Stick slot on your computer.

• If the “Memory Stick PRO Duo” is not recognized, see page 101.

For a computer without a Memory Stick slot

Follow Stages 1 through 4 on pages 74 to 78 to copy images.

• When you are using Windows 2000, install the software (supplied) before proceeding. With Windows XP, installation is unnecessary.

• The screen displays shown in this section are the examples for copying images from “Memory Stick Duo”.

With Windows 95/98/98 Second Edition/ NT/Me:

This camera is not compatible with these version of the Windows operating system. When you use a computer without a Memory Stick slot, use a commercially available Memory Stick Reader/Writer to copy images from a “Memory Stick Duo” to your computer. To copy images in the internal memory to your computer, copy the images to a “Memory Stick Duo” first, then copy them to your computer.

Stage 1: Preparing the camera and the computer

1 Insert a “Memory Stick Duo” with

recorded images into the camera.

• When copying images in the internal memory, this step is unnecessary.

2 Insert the sufficiently charged

battery pack in the camera, or connect the camera to a wall outlet (wall socket) with the AC Adaptor (not supplied) and the USB, A/V, DC IN cable for multiuse terminal (not supplied).

• When you copy images to your computer using a battery pack with little remaining charge, copying may fail or image data may become corrupted if the battery pack shuts down too soon.

3 Press (Playback), then turn on

the computer.

(Playback)

button

Page 75

Copying images to your computer

Stage 2: Connecting the camera and your computer

Connect the camera to your computer.

2 To the multi

1 To a U SB

jack

Cable for multi-use terminal

• With Windows XP/Vista, the Auto Play wizard appears on the desktop.

“Connecting to Mass Storage...” appears on the screen of the camera.

connector

Access indicators*

* is displayed on the screen during the

communication session. Do not operate the computer while the indicator is displayed. When the indicater changes to

, you can start using the computer

again.

• If “Connecting to Mass Storage...” does not appear, set [USB Connect] to [Mass Storage] (page 61).

• When the software (supplied) has been installed, the [Import Images] screen (page 81) may be displayed. In this case, you can import images using “Picture Motion Browser” directly.

Stage 3-A: Copying images to a computer

• For Windows 2000, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 77.

• For Windows XP/Vista, when the wizard screen does not appear automatically, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 77.

This section describes an example of copying images to a “My Documents” folder.

1 After making a USB connection in

Stage 2, click [Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard] screen appears automatically on the desktop.

t [OK] as the wizard

Using your computer

When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera. Wai t for a w hil e .

Page 76

Copying images to your computer

4 Select a name and destination for

the images, then click [Next].

The “Scanner and Camera Wizard” screen appears.

2 Click [Next].

The images saved on the “Memory Stick Duo” of the camera appear.

• If no “Memory Stick Duo” is inserted, images in the internal memory appear.

3 Click the check box of unwanted

images to remove the checkmark so they are not copied, then click [Next].

The “Picture Name and Destination” screen appears.

Image copying starts. When the copying is completed, the “Other Options” screen appears.

• This section describes an example of copying images to the “My Documents” folder.

5 Click the radio button next to

[Nothing. I’m finished working with these pictures] to select it, then click [Next].

The “Completing the Scanner and Camera Wizard” screen appears.

Page 77

Copying images to your computer

6 Click [Finish].

The wizard screen closes.

• To continue copying other images, disconnect the cable for multi-use terminal (page 78). Then follow the procedure explained in “Stage 2: Connecting the camera and your computer” on page 75.

Stage 3-B: Copying images to a Computer

• For Windows XP, follow the procedure explained in “Stage 3-A: Copying images to a computer” on page 75.

This section describes an example of copying images to the “My Documents” folder.

• On the storage destination of the image files, see (page 79).

3 Double-click the [My Documents]

folder. Then, right-click on the “My Documents” window to display the menu and click [Paste].

1 Double-click [My Computer] t

[Removable Disk]

• If the “Removable Disk” icon is not displayed, see page 102.

t [DCIM].

2 Double-click the folder where the

image files you want to copy are stored. Then, right-click an image file to

display the menu and click [Copy].

The image files are copied to the “My Documents” folder.

• When an image with the same file name exists in the copy destination folder, the overwrite confirmation message appears. When you overwrite an existing image with a new one, the original file data is deleted. To copy an image file to the computer without overwriting, change the file name to a different name and then copy the image file. However, note that if you change the file name (page 80), you may not be able to play back that image with your camera.

Using your computer

Page 78

Copying images to your computer

Stage 4: Viewing images on your computer

This section describes the procedure for viewing copied images in the “My Documents” folder.

1 Click [Start] t [My Documents].

The contents of the “My Documents” folder are displayed.

• If you are not using Windows XP, double-click [My Documents] on the desktop.

2 Double-click the desired image

file.

To delete the USB connection

Perform the procedures listed below beforehand when:

• Disconnecting the cable for multi-use terminal

• Removing a “Memory Stick Duo”

• Inserting a “Memory Stick Duo” into the camera after copying images from the internal memory

• Turning off the camera

1 Double-click on the tasktray.

Double-click here

2 Click (USB Mass Storage Device)

[Stop].

3 Confirm the device on the confirmation

window, then click [OK].

4 Click [OK].

The device is disconnected.

•Step 4 is unnecessary for Windows XP.

The image is displayed.

Page 79

Copying images to your computer

Image file storage destinations and file names

The image files recorded with your camera are grouped as folders on the “Memory Stick Duo”.

Example: viewing folders on Windows XP

A Folder containing image data recorded

using a camera not equipped with the folder creating function

B Folder containing image data recorded

using this camera When no new folders are created, there are folders as follows:

– “Memory Stick Duo”; “101MSDCF” only – Internal memory; “101_SONY” only

• You cannot record any images to the “100MSDCF” folder. The images in these folders are available only for viewing.

• You cannot record/playback any images to the “MISC” folder.

• Image files are named as follows. ssss

stands for any number within the range from 0001 to 9999. The numerical portions of the name of a movie file recorded in movie mode and its corresponding index image file are the same.

– Still image files: DSC0ssss.JPG – Movie files: MOV0ssss.MPG – Index image files that are recorded when you

record movies: MOV0ssss.THM

• For more information about folders, see pages 54 and 57.

Using your computer

Page 80

Viewing image files stored on a computer with your camera (using a “Memory Stick Duo”)

This section describes the process using a Windows computer as an example. When an image file copied to a computer no longer remains on a “Memory Stick Duo”, you can view that image again on the camera by copying the image file on the computer to a “Memory Stick Duo”.

• Step 1 is not necessary if the file name set with your camera has not been changed.

• You may be unable to play back some images depending on the image size.

• When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed.

• When there is no folder, create a folder with your camera (page 57) first, and then copy the image file.

2 Copy the image file to the

“Memory Stick Duo” folder in the following order.

1Right-click the image file, then click

[Copy].

2Double-click [Removable Disk] or

[Sony MemoryStick] in [My Computer].

3Right-click the [sssMSDCF] folder

in the [DCIM] folder, then click [Paste].

• sss stands for any number within the

range from 100 to 999.

1 Right-click the image file, then

click [Rename]. Change the file name to “DSC0ssss.”

Enter a number from 0001 to 9999 for ssss.

1 2

• If the overwrite confirmation message appears, enter a different number.

• An extension may be displayed depending on the computer settings. The extension for still images is JPG, and the extension for movies is MPG. Do not change the extension.

Page 81

Using the “Picture Motion Browser” (supplied)

You can use still images and movies from the camera more than ever by taking advantage of the software. This section summarizes the “Picture Motion Browser” and gives the basic instructions.

“Picture Motion Browser” overview

With the “Picture Motion Browser” you can:

• Import images shot with the camera and display them on the computer.

• Organize images on the computer on a calendar by shooting date to view them.

• Retouch (Red Eye Correction, etc.), print, and send still images as e-mail attachments, change the shooting date.

• Still images can be printed or saved with the date.

• You can create a data disc using a CD burner drive or DVD burner drive.

• For details on the “Picture Motion Browser”, refer to the Help.

To access the Help, click [Start] t [All Programs] (in Windows 2000, [Programs]) t [Sony Picture Utility] t [Help] t [Picture Motion Browser].

Starting and exiting the “Picture Motion Browser”

Starting the “Picture Motion Browser”

Double-click the (Picture Motion Browser) icon on the desktop. Or, from the Start menu: Click [Start] t [All Programs] (in Windows 2000, [Programs]) t [Sony Picture Utility] t [Picture Motion Browser].

• The confirmation message of the Information tool appears on the screen when starting the “Picture Motion Browser” for the first time. Select [Start]. This function informs you of news, such as software updates. You can change the setting later.

Exiting the “Picture Motion Browser”

Click button in the top right corner of the screen.

Basic instructions

Follow these steps to import and view images from the camera.

Importing images

1 Make sure “Media Check Tool”* is

running.

Look for a the taskbar.

* “Media Check Tool” is a program that

automatically detects and imports images when a “Memory Stick” is inserted or when the camera is connected.

• If there is no icon: Click [Start] t [All

Programs] (in Windows 2000, [Programs]) t [Sony Picture Utility] t [Tools] t [Media Check Tool].

(Media Check Tool) icon in

Using your computer

Page 82

Using the “Picture Motion Browser” (supplied)

2 Connect the camera to your

computer with the cable for multiuse terminal.

After the camera is automatically detected, the [Import Images] screen is displayed.

• If you use the Memory Stick slot, refer to page 74 first.

• In Windows XP, if the Auto Play Wizard appears, close it.

3 Import the images.

To start importing images, click the [Import] button.

By default, images are imported into a folder created in “My Pictures” that is named with the date of importing.

• For instructions on changing the “Folder to be imported”, refer to page 85.

Viewing images

1 Checking imported images.

When importing is complete, the “Picture Motion Browser” starts. Thumbnails of the imported images are displayed.

• The “My Pictures” folder is set as the default folder in “Viewed folders”.

• You can double-click a thumbnail to display the image by itself.

2 Viewing images in “Viewed

folders” arranged by shooting date on a calendar

1Click the [Calendar] tab.

Years when images were shot are listed.

2Click the year.

Images shot that year are displayed, arranged on the calendar by shooting date.

3To display images by month, click the

desired month. Thumbnails of images shot that month are displayed.

4To display images by time, click the

desired date. Thumbnails of images shot that day are displayed, arranged by hour.

Page 83

Using the “Picture Motion Browser” (supplied)

Year display screen

Month display screen

Hour display screen

• To list images from a particular year or month, click that period on the left of the screen.

• You can edit displayed images by clicking the toolbar button.

Displaying images in full-screen mode

To display a slide show of current images in full-screen mode, click the

button.

• To play or pause the slide show, click the

button on the lower left of the screen.

• To stop the slide show, click the button on the lower left of the screen.

Using your computer

3 Displaying individual images

On the hour display screen, double-click a thumbnail to display the image by itself in a separate window.

Page 84

Using the “Picture Motion Browser” (supplied)

Creating a data disc Using Map View to display still

Images can be saved in CD or DVD as a data disc.

• CD burner drive or DVD burner drive

required.

• The following disc can be used for

creating a data disc.

–CD-R/RW (12cm) – DVD±R/RW (12 cm) – DVD+R DL (12 cm) – DVD-R DL (12 cm)

images on a map

Map View enables you to display the recorded location of a still image with recording position information.

• To use the Map View function, your

computer should be connected to the Internet.

1 Select a thumbnail marked with

1 Select images to save on the disc.

• To select two or more adjacent images, click the first image, then hold down the “Shift” key and click the next images.

• To select two or more unadjacent images, hold down the “Ctrl” key and click the other images.

2 Click .

The Map View main window appears.

2 Click the button on the tool

bar.

The [Create Data Disc] display appears.

• Maps and satellite images powered by

3 Click [Start].

Google Maps mapping service.

4 Follow the display instructions to

proceed with creating the data disc.

• To add desired images, drag and drop on the [Create Data Disc] display.

Selecting all images in a folder

Click the [folders] tab, then right-click on the desired folder icon and select [Create Data Disc]. All images in a folder can be selected.

• You can later add position information on

the still images, using the Map View. For details, see the Help of Map View.

Page 85

Using the “Picture Motion Browser” (supplied)

Other functions

Preparing images stored on the computer for viewing

To view them, register the folder that contains the images as one of the “Viewed folders”.

1 Click on the main screen, or

choose [Register Folders to View] from the [File] menu.

The settings screen for “Viewed folders” registration is displayed.

2 Specify the folder with images for

importing to register the folder as one of the “Viewed folders”.

3 Click [OK].

The image information is registered in the database.

• Images in any subfolders of “Viewed

folders” are also registered.

Changing the “Folder to be imported”

To change the “Folder to be imported”, access the “Import Settings” screen.

1 Choose [Import Settings] t

[Location for Imported Images] from the [File] menu.

The “Location for Imported Images” screen is displayed.

2 Choose the “Folder to be

imported”.

• You can specify the “Folder to be

imported” from folders registered as “Viewed folders.”

Updating image registration information

To update image information, choose [Update Database] from the [Tools] menu.

• Updating the database may take a while.

• If you rename image files or folders in

“Viewed folders”, they cannot be displayed with this software. In this case, update the database.

Saving images with the date

1 Double-click an image to display it. 2 Click and select [Insert Date] from the

drop-down list.

3 Select your desired color and position, and

then click [OK].

4 Click to save.

Printing images with the date

1 Select the still image you want to print. 2 Click on the toolbar. 3 Click the check box of [Print date taken] in

Print Options.

4 Click [Print].

Using your computer

Page 86

Using the “Picture Motion Browser” (supplied)

To uninstall the “Picture Motion Browser”

1 Click [Start] t [Control Panel] (in

Windows 2000, [Start] t [Settings] t [Control Panel]), then double-click [Add/ Remove Programs].

2 Select [Sony Picture Utility], then click

[Remove] (in Windows 2000, [Change/ Remove]) to execute the uninstallation.

Page 87

Using the “Music Transfer” (supplied)

You can change the Music files that are preset at the factory with desired Music files using “Music Transfer” in the CDROM (supplied). Also, you can delete or add these files whenever you want.

Adding/Changing Music using “Music Transfer”

The music formats you can transfer with “Music Transfer” are listed below:

• MP3 files stored on the hard drive of your computer

• Music on CDs

• Preset-music saved on this camera

1 Press HOME to display the HOME

screen.

2 Select (Printing, Other) with b/

B on the control button, then select [ Music Tool] with v/V, then press z.

3 Select [Download Music] with v/

V/b/B, then press z.

The message “Connect to PC” appears.

• To restore the music preset at the factory

to the camera:

1 Perform [Format Music] in step 3. 2 Execute [Restore defaults] on “Music

Transfer.”

All Music files return to the preset-music, and [Music] in the [Slide Show] menu is set to [Off].

3 Select a suitable Music file for the slide

show effect (page 46). You can reset the Music files to the preset ones using [Initialize] (page 60), however, other settings will also be reset.

• For details on using “Music Transfer,” see the on-line help in “Music Transfer.”

Using your computer

4 Make a USB connection between

the camera and your computer.

5 Start “Music Transfer.”

6 Follow the instructions on the

screen to add/change Music files.

Page 88

Using your Macintosh computer

You can copy images to your Macintosh computer.

• “Picture Motion Browser” is not compatible with Macintosh computers.

Recommended computer environment

The following environment is recommended for a computer connected to the camera.

Recommended environment for copying images

OS (pre-installed): Mac OS 9.1/9.2/ Mac

OS X(v10.1 to v10.4)

USB jack: Provided as standard

Recommended environment for using “Music Transfer”

OS (pre-installed): Mac OS X (v10.3 to

v10.4)

CPU: iMac, eMac, iBook, PowerBook, Power

Mac G3/G4/G5 series, Mac mini

Memory: 64 MB or more (128 MB or mor e is

recommended)

Hard Disk: Disk space required for

installation—approximately 250 MB

Notes on connecting your camera to a computer

• Operations are not guaranteed for all the recommended computer environments mentioned above.

• If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate depending on the types of USB devices you are using.

• Operations are not guaranteed when using a USB hub.

• When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time.

Copying and viewing images on a computer

1 Prepare the camera and a

Macintosh computer.

Perform the same procedure as described in “Stage 1: Preparing the camera and the computer” on page 74.

2 Connect the cable for multi-use

terminal.

Perform the same procedure as described in “Stage 2: Connecting the camera and your computer” on page 75.

3 Copy image files to the Macintosh

computer.

1Double-click the newly recognized icon

t [DCIM] t the folder where the

images you want to copy are stored.

2Drag and drop the image files to the

hard disk icon. The image files are copied to the hard disk.

• For details on the storage location of the images and file names, see page 79.

Page 89

Using your Macintosh computer

4 View images on the computer.

Double-click the hard disk icon desired image file in the folder containing the copied files to open that image file.

To delete the USB connection

Perform the procedures listed below beforehand when:

• Disconnecting the cable for multi-use terminal

• Removing a “Memory Stick Duo”

• Inserting a “Memory Stick Duo” into the camera after copying images from the internal memory

• Turning off the camera

Drag and drop the drive icon or the icon of the “Memory Stick Duo” to the “Trash” icon.

The camera is disconnected from the computer.

Adding/Changing Music using “Music Transfer”

You can change the Music files that are preset at the factory with desired Music files. Also, you can delete or add these files whenever you want. The music formats you can transfer with “Music Transfer” are listed below:

• MP3 files stored on the hard drive of your computer

• Music on CDs

• Preset-music saved on this camera

To install “Music Transfer”

• Shut down all other application software before you install “Music Transfer.”

• For installation, you need to log on as Administrator.

t the

1 Turn on your Macintosh computer, and

insert the CD-ROM (supplied) into the CD-ROM drive.

2 Double-click (SONYPICTUTIL). 3 Double-click the [MusicTransfer.pkg] file

in [MAC] folder. The installation of the software starts.

To add/change Music files

See “Adding/Changing Music using “Music Transfer”” on page 87.

Technical Support

Additional information on this product and answers to frequently asked questions can be found at the Sony Customer Support Website. http://www.sony.net/

Using your computer

Page 90

Printing still images

How to print still images

When you print images shot in [16:9] mode, both edges may be cut off, so be sure to check before printing (page 104).

Printing directly using a PictBridge compliant printer (page 91)

You can print images by connecting the camera directly to a PictBridge compliant printer.

Printing directly using a “Memory Stick” compliant printer

You can print images with a “Memory Stick” compliant printer. For details, see the operating instructions supplied with the printer.

Printing using a computer

You can copy images to a computer using the supplied “Picture Motion Browser” software and print the images. You can insert the date on the image and print it (page 85).

Printing at a shop (page 94)

You can take a “Memory Stick Duo” containing images shot with your camera to a photo printing service shop. You can make a DPOF (Print order) mark on images which you want to print out in advance.

Page 91

Printing images directly using a PictBridge compliant printer

Even if you do not have a computer, you can print images shot using your camera by connecting the camera directly to a PictBridge compliant printer.

• “PictBridge” is based on the CIPA standard. (CIPA: Camera & Imaging Products Association)

• You cannot print movies.

• If the indicator flashes on the screen of the camera (error notification), check the connected printer.

Stage 1: Preparing the camera

Prepare the camera to connect it to the printer with the cable for multi-use terminal. When connecting the camera to a printer that is recognized when [USB Connect] is set to [Auto], Stage 1 is unnecessary.

MENU button

Control button

HOME button

• It is recommended to use a fully charged battery pack to prevent the power from turning off partway through printing.

1 Press HOME to display the HOME

screen.

2 Select (Settings) with b/B,

then select [ Main Settings] with v/V, and then press z .

3 Select [ Main Settings 2] with v/

V/b/B, and select [USB Connect], then press z.

4 Select [PictBridge] with v/V, then

press z.

The USB mode is set.

Printing still images

Page 92

Printing images directly using a PictBridge compliant printer

Stage 2: Connecting the camera to the printer

1 Connect the camera to the printer.

2 To the multi

connector

1 To t he

USB jack

Cable for multi-use terminal

2 Turn on your camera and the

printer.

After the connection is made, the indicator appears.

Stage 3: Selecting an image to print

Select [This Image] or [Multiple Images] with v/V, then press z.

When you select [This Image]

Prints the currently selected image. Jump to step 4.

When you select [Multiple Images]

Selects and prints multiple images.

1 Select the image you want to print with v/

V/b/B, then press z.

A mark appears on the selected image.

2 Press MENU to display the menu. 3 Select [OK] with v, then press z.

• When the index screen is displayed, you can print all the images in the folder by selecting [Multiple Images] and moving the highlight to the folder bar with b, then putting a checkmark in the checkbox of the folder.

The camera is set to playback mode, then an image and the print menu appear on the screen.

Page 93

Printing images directly using a PictBridge compliant printer

Stage 4: Printing

Select print settings with v/V/b/B.

[Quantity]

When the [Layout] is set to [1-up/ Borderless] or [1-up/Border]:

Select the number of sheets of an image that you want to print. The image will be printed as a single image.

When the [Layout] is not set to [1-up/ Borderless] or [1-up/Border]:

Select the number of sets of images that you want to print as an index image. If you selected [This Image] in step 1, select the number of the same image you want to print side by side on a sheet as an index image.

• The designated number of images may not all fit onto a single sheet depending on the quantity of images.

[Layout]

Specify the number of images to be printed on a sheet of paper.

[Size]

Select the size of the printing sheet.

[Date]

Select [Day&Time] or [Date] to insert the date and time on images.

• When you choose [Date], the date will be inserted in the order you select (page 66). This function may not be provided depending on the printer.

2 Select [OK] with v, then press z.

The image is printed.

• Do not disconnect the cable for multi-use terminal while the (PictBridge Connecting) indicator appears on the screen.

indicator

To print other images

Select [Multiple Images], then perform the process again from stage 3.

Stage 5: Stopping the print job

Disconnect the cable for multi-use terminal from the camera after the screen changes to the same one that appears in stage 2.

Printing still images

Page 94

Printing at a shop

You can take a “Memory Stick Duo” containing images shot with your camera to a photo printing service shop. As long as the shop supports photo printing services conforming to the DPOF, you can make a DPOF (Print order) mark on images in advance so that you do not need to reselect them when you print them out at the shop.

• You cannot print images stored in the internal memory at a print shop directly from the camera. Copy the images to a “Memory Stick Duo”, then take the “Memory Stick Duo” to the print shop.

What is DPOF?

DPOF (Digital Print Order Format) is a function allowing you to make a DPOF (Print order) mark on images of “Memory Stick Duo” that you want to print out later.

• You can also print the images with the DPOF (Print order) mark using a printer that conforms to the DPOF (Digital Print Order Format) standard or using a PictBridge compliant printer.

• You cannot mark movies.

When taking a “Memory Stick Duo” to a shop

• Consult your photo printing service shop as to what types of “Memory Stick Duo” they handle.

• If a “Memory Stick Duo” is not handled by your photo printing service shop, copy the images you want to print out to other medium such as a CD-R and take it to the shop.

• Be sure to take the Memory Stick Duo Adaptor with it.

• Before you take image data to a shop, always copy (back up) your data to a disk.

• You cannot set the number of prints.

• When you want to superimpose dates on images, consult your photo printing service shop.

Marking a selected image

MENU button

Control button

1 Display the image you want to

print.

2 Press MENU to display the menu.

3 Select [DPOF] with v/V and select

[This Image], then press z.

A DPOF (Print order) mark is attached to the image.

DPOF

To remove the mark

Select the images from which you want to remove the mark, then press z in step 3.

Page 95

Printing at a shop

Selecting and marking the images

1 Press MENU to display the menu.

2 Select [DPOF] with v/V and select

[Multiple Images], then press z.

3 Select the image you want to

mark with v/V/b/B, then press z.

A mark is attached to the selected image.

To cancel the selection

To cancel, select [Exit] in step 5, then press z.

To remove the mark

Select the images from you want to remove the marks, then press z in step 3.

To mark all the images in the folder

In step3, move the frame to the folder bar with b, then press the z. A mark is attached to the selected folder and all the images.

4 Press MENU.

5 Select [OK] with v, then press z.

Printing still images

Page 96

Troubleshooting

If you experience trouble with your camera, try the following solutions.

1 Check the items on pages 97 to 106.

If a code such as “C/E:ss:ss” appears on the screen, see page 107.

2 Remove the battery pack, and insert the battery pack again after about one

minute, and turn on the power.

3 Initialize the settings (page 60).

4 Consult your Sony dealer or local authorized Sony service facility.

Please understand that you give your consent that the contents of the internal memory, Music files may be checked when you send your camera to be repaired.

Click one of the following items to jump to the page explaining the symptom and cause or the appropriate corrective action.

Battery pack and power 97

Shooting still images/movies 97

Viewing images 100

Deleting/Editing images 101

Computers 101

Picture Motion Browser 103

“Memory Stick Duo” 103

Internal memory 104

Printing 104

PictBridge compliant printer 105

Others 106

Page 97

Troubleshooting

Battery pack and power

The battery pack cannot be installed.

• Install the battery pack correctly using the tip of the battery pack to push the battery eject lever

toward the bottom of the camera.

Cannot turn on the camera.

• After installing the battery pack into the camera, it may take a little while to get the camera

powered.

• Install the battery pack correctly.

• The battery pack is discharged. Install charged battery pack.

• The battery pack is dead (page 113). Replace it with a new one.

• Use a recommended battery pack.

The power turns off suddenly.

• If you do not operate the camera for about three minutes while the power is on, the camera

turns off automatically to prevent wearing down the battery pack. Turn on the camera again.

• The battery pack is dead (page 113). Replace it with a new one.

The battery remaining indicator is incorrect.

• This phenomenon occurs when you use the camera in an extremely hot or cold location.

• The displayed battery remaining differs from the current one. Fully discharge and then charge

the battery pack to correct the display.

• The battery pack is discharged. Install the charged battery pack.

• The battery pack is dead (page 113). Replace it with a new one.

Cannot charge the battery pack

• You cannot charge the battery pack using the AC Adapter (not supplied).

Shooting still images/movies

Your camera cannot record images.

• Check the free capacity of the internal memory or “Memory Stick Duo”. If it is full, do one of

the following:

– Delete unnecessary images (page 26). – Change the “Memory Stick Duo”.

• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to

the LOCK position. Set the switch to the recording position (page 111).

• You cannot record images while charging the flash.

• Select a shooting mode other than [ Movie Mode] using the HOME screen when shooting

still images.

• Select [ Movie Mode] using the HOME screen when shooting movies.

• The image size is set to [640(Fine)] when recording movies. Do one of the following:

Troubleshooting

Page 98

Troubleshooting

– Set the image size to other than [640(Fine)]. – Insert a “Memory Stick PRO Duo”.

Movie recording stops during shooting

• Movie recording stops automatically when the file size of the movie reaches 2 GB.

The subject is not visible on the screen

• Your camera is set to the playback mode. Press (Playback) to change to the recording

mode.

Anti-blur function does not work.

• The anti-blur function does not work when appears on the display.

• The anti-blur function may not work properly when shooting night scenes.

• Shoot after pressing the shutter button halfway down; do not press it fully down suddenly.

Recording takes a long time.

• The NR slow shutter function is activated (page 15). This is not a malfunction.

The image is out of focus.

• The subject is too close. Shoot in (Macro) recording mode. Make sure to position the lens

farther away from the subject than the shortest shooting distance, approximately 8 cm (3 1/4 inches) (W)/80 cm (31 1/2 inches) (T), when shooting. Or, set (Close Focus) and focus from a distance of approx. 1 cm to 20 cm (13/32 inch to 7 7/8 inches) from the subject (page 22).

• (Close Focus) is set, or [Twilight], [Landscape] or [Fireworks] mode is selected in the

Scene Selection mode when shooting still images.

• The Focus preset function is selected. Select the auto focus mode (page 41).

• Refer to “If the subject is out of focus” on page 42.

Zoom does not work.

• When (Close Focus) is selected, the optical zoom is not available.

• The smart zoom cannot be used when the image size is set to [8M] or [3:2].

• The digital zoom cannot be used while shooting movies.

• When [Face Detection] is set to [On], you cannot use the Digital Zoom.

The flash does not work.

• The flash is set to (Flash forced off) (page 21).

• You cannot use the flash when: – [REC Mode] is set to [Burst] or Exposure Bracket (page 37). – [High Sensitivity], [Twilight] or [Fireworks] mode is selected in the Scene Selection mode

(page 34).

– Shooting movies.

Page 99

Troubleshooting

• Set the flash to (Flash forced on) when (Close Focus) is set, or [Landscape], [Hi-Speed

Shutter], [Beach], or [Snow] mode is selected in the Scene Selection mode (page 21).

Fuzzy specks appear in images shot using the flash.

• Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.

The close-up shoot function (Macro/Close Focus) does not work.

• [Twilight], [Landscape] or [Fireworks] mode is selected in the Scene Selection mode

(page 34).

The date and time are not displayed on LCD screen.

• While shooting, the date and time are not displayed. They are displayed only during playback.

Cannot insert dates on image

• This camera does not have a feature for superimposing dates on images.

• You can insert the date on images and save or print them using “Picture Motion Browser”

(page 85).

The F value and shutter speed flash when you press and hold the shutter button halfway down.

• The exposure is incorrect. Correct the exposure (page 39).

The screen is too dark or too bright.

• Adjust the brightness of the LCD backlight (page 18).

The image is too dark.

• You are shooting a subject with a light source behind the subject. Select the metering mode

(page 40) or adjust the exposure (page 39).

The image is too bright.

• Adjust the exposure (page 39).

The image colors are not correct.

• Set [Color Mode] to [Normal] (page 38).

Vertical streaks appear when you are shooting a very bright subject.

• The smear phenomenon is occurring and white, black, red, or purple streaks appear on the

image. This phenomenon is not a malfunction.

Troubleshooting

Page 100

Troubleshooting

Noise appears in the image when you view the screen in a dark place.

• The camera is attempting to increase the visibility of the screen by temporarily brightening

the image under conditions of low illumination. There is no effect on the recorded image.

The eyes of the subject come out red.

• Set [Red Eye Reduction] in the shooting menu to [On] (page 45).

• Shoot the subject at a distance closer than the flash range using the flash.

• Light the room and shoot the subject.

• Retouch the image using [Red Eye Correction] (page 51).

Dots appear and remain on the screen.

• This is not a malfunction. These dots are not recorded (page 2).

Cannot shoot images in succession.

• The internal memory or “Memory Stick Duo” is full. Delete unnecessary images (page 26).

• The battery level is low. Install charged battery pack.

• You cannot shoot images in succession in Close Focus mode.

Viewing images

Your camera cannot play back images.

• Press (Playback) (page 24).

• The folder/file name has been changed on your computer (page 80).

• When an image file has been processed by a computer or when the image file was recorded

using a model other than that of your camera, playback on your camera is not guaranteed.

• The camera is in USB mode. Delete the USB connection (page 78).

The date and time are not displayed.

• v (DISP) button is turned off (page 18).

The image appears rough right after playback starts.

• The image may appear rough right after playback starts due to image processing. This is not a

malfunction.

The image does not appear on the TV screen.

• Check [Video Out] to see if the video output signal of your camera is set to the color system of

your TV (page 62).

• Check whether the connection is correct (page 68).

• If the USB connector of the cable for multi-use terminal is connected to another device,

disconnect it.

100

Sony DSC-T100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Notes on using your camera

Table of contents

Basic techniques for better images

Focus

Exposure

Color

Quality

Identifying parts

Indicators on the screen

Changing the screen display

Using the internal memory

Basic Operations

Shooting images easily (Auto adjustment mode)

Viewing images

Deleting images

Menu items

Using functions for shooting

Switching the shooting mode

Shooting images using Scene Selection

Shooting menu

Scene Selection: Using Scene Selection

Image Size: Selecting the image size

Face Detection: Detecting the face of subject

REC Mode: Selecting the continuous shooting method

ISO: Selecting a luminous sensitivity

EV: Adjusting the light intensity

Metering Mode: Selecting the metering mode

Focus: Changing the focus method

White Bal: Adjusting the color tones

Flash Level: Adjusting the amount of flash light

Red Eye Reduction: Reducing the red-eye phenomenon

SteadyShot: Selecting the anti-blur mode

SETUP: Selecting the shooting settings

Using functions for viewing

Playing back images from the HOME screen

Viewing menu

DPOF: Adding a Print order mark

Customizing the settings

Customizing the Manage Memory feature and the Settings

Manage Memory

Format

Create REC.Folder

Change REC.Folder

Copy

Format

Settings

Beep

Function Guide

Initialize

USB Connect

COMPONENT

Video Out

AF Illuminator

Grid Line

AF Mode

Digital Zoom

Auto Orientation

Auto Review

Clock Settings

Clock Settings

Language Setting

Language Setting

Viewing images on a TV

Viewing images on a TV

Using your computer

Enjoying your Windows computer

Installing the software (supplied)

Copying images to your computer

Viewing image files stored on a computer with your camera (using a “Memory Stick Duo”)

Using the “Picture Motion Browser” (supplied)

Using the “Music Transfer” (supplied)

Using your Macintosh computer

Printing still images

How to print still images

Printing images directly using a PictBridge compliant printer

Printing at a shop