SONY DSC-P73 SERVICE MANUAL L1 V1.0

DSC-P73

SERVICE MANUAL

Ver 1.0 2004.04

Revision History

Photo: Silver

Link

SELF DIAGNOSIS FUNCTION

LEVEL 1

US Model

Canadian Model

AEP Model

UK Model

E Model

Hong Kong Model

Australian Model

Chinese Model

Korea Model

Argentine Model

Brazilian Model

Tourist Model

Japanese Model

ORNAMENTAL PARTSSPECIFICATIONS

• INSTRUCTION MANUAL is shown at the end of this document.

DIGITAL STILL CAMERA

DSC-P73

SPECIFICATIONS

x Camera [System]

Image device 6.85 mm (1/2.7 type) color

Total pixels number of camera

Effective pixels number of camera

Lens 3× zoom lens

Exposure control

White balance

File format (DCF compliant)

Recording medium

FlashRecommended distance (when ISO

CCD Primary color filter

Approx. 4 231 000 pixels

Approx. 4 065 000 pixels

f=6 to 18 mm (35 mm camera conversion: 39 to 117 mm) F2.8-5.2

Automatic, Manual exposure, Twilight, Twilight portrait, Candle, Landscape, Beach, Soft snap

Automatic, Daylight, Cloudy, Fluorescent, Incandescent

Still images: Exif Ver. 2.2, JPEG compliant, DPOF compatible Movies: MPEG1 compliant (Monaural)

“Memory Stick”

sensitivity is set to Auto)

0.2 to 3.5 m (7 11 feet 5

0.5 to 3.5 m (19 11 feet 5

/8inches to

/8inches) (W)

/4inches to

/8inches) (T)

[Output connectors]

A/V OUT (MONO) jack (Monaural)

USB jack mini-B USB communication

Minijack Video: 1 Vp-p, 75 Ω, unbalanced, sync negative Audio: 327 mV (at a 47 kΩ load) Output impedance 2.2 kΩ

Hi-Speed USB (USB 2.0 compliant)

[LCD screen]

LCD panel used

Total number of dots

3.8 cm (1.5 type) TFT drive

67 200 (280×240) dots

[Power, general]

Power AA nickel hydride batteries (2)

Power consumption (during shooting with LCD

Operating temperature range

Storage temperature range

Dimensions 117.2 × 53.7 × 35.8 mm

Mass Approx. 236 g (0.5 lb 8.3 oz) (two

Microphone Electret condenser microphone Speaker Dynamic speaker

Exif Print Compatible PRINT Image Matching II

PictBridge Compatible

2.4 V AC-LS5 AC Adaptor (not supplied), 4.2 V

screen on)

1.1 W

0° to +40°C (32° to +104°F)

−20° to +60°C (−4° to +140°F)

/8 × 2 1/8 × 1 7/16inches)

(W/H/D, protruding portions not included)

batteries, “Memory Stick,” wrist strap, and so on included)

Compatible

x BC-CS2A/CS2B Ni-MH battery

charger

Power requirements

Output voltage

Operating temperature range

Storage temperature range

Dimensions 71 × 30 × 91 mm

Mass Approx. 90 g (3 oz)

AC 100 to 240V 50/60Hz 3 W

AA : DC 1.4 V 400 mA × 2 AAA : DC 1.4 V 160 mA × 2

0° to +40°C (32° to +104°F)

−20° to +60°C (−4° to +140°F)

/8 × 1 3/16 × 3 5/8 inches) (W/H/

(2 D)

x AC-LS 5 AC Adapto r (n ot supplied)

Input rating AC 100 to 240 V, 50/60 Hz

Output rating DC 4.2 V, 1.5 A Operating temperature range

Storage temperature range

Maximum dimensions

Mass Approx. 130 g (5 oz)

11 W, 0.16 to 0.09 A

0° to +40°C (32° to +104°F)

−20° to +60°C (−4° to +140°F)

Approx. 48 × 29 × 81 mm (1

/16 × 3 1/4 inches) (W/H/D)

/16 ×

Accessories

• HR6 (size AA) Ni-MH batteries (2)

• Battery case (1)

• BC-CS2A/CS2B Ni-MH Battery charger (1)

• Power cord (mains lead) (1)

• USB cable (1)

• A/V connecting cable (1)

• Wrist strap (1)

• “Memory Stick” (16MB) (1)

• CD-ROM (USB driver: SPVD-012) (1)

• Operating Instructions (1)

See page 6.

Design and specifications are subject to change without notice.

— 2 —

DSC-P73

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY .

SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer.

1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.

2. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair . Point them out to the customer and recommend their replacement.

4. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS P AR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMA TIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

5. Check the B+ voltage to see it is at the values specified.

6. Flexible Circuit Board Repairing

•Keep the temperature of the soldering iron around 270˚C during repairing.

• Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering or unsoldering.

— 3 —

DSC-P73

[Description on Self-diagnosis Display]

SELF-DIAGNOSIS FUNCTION

Self-diagnosis display

• C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.)

• E: ss: ss Contact your Sony dealer or local authorized Sony service facility.

Display Code

C:32:ss

C:13:ss

E:61:ss

E:91:ss

E:92:ss

Countermeasure

Turn the power off and on again. Format the “Memory stick”. Insert a new “Memory Stick”.

Checking of lens drive circuit.

Checking of flash unit or replacement of flash unit.

Insert batteries correctly. Batteries are not inserted correctly.

Turn the power off and on again.

Trouble with hardware. Unformatted memory stick is inserted. Memory stick is broken.

When failed in the focus and zoom initialization.

Abnormality when flash is being charged.

Batteries were installed or removed when using the AC adaptor.

Cause

Caution Display During Error

SYSTEM ERROR FORMAT ERROR MEMORY STICK ERROR

—

— 4 —

1. MAIN PARTS

Note:

• Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.

• The parts numbers of such as a cabinet are also appeared in this section. Refer to the parts number mentioned below the name of parts to order.

•Abbreviation AR : Argentine model AUS: Australian model BR : Brazilian model

CH : Chinese model CND: Canadian model HK : Hong Kong model

1. ORNAMENTAL PARTS

J: Japanese model JE : Tourist model KR : Korean model

JK cover 3-090-789-11

DSC-P73

The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

Les composants identifiés par une marque 0 sont critiquens pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

Lens ring (520) 3-090-814-01

— 5 —

DSC-P73

Checking supplied accessories.

HR6 (size AA) Ni-MH batteries (2) (not supplied)

USB cable (1) 1-827-038-11

"Memory Stick" (16MB) (1) (not supplied)

Conversion Adaptor (1)

0 1-569-007-11 (E) 0 1-573-856-12 (JE)

Battery case (1) 3-074-757-01

A/V connecting cable (1) 1-824-111-11

CD-ROM (SPVD-012 USB driver) (1) 3-091-338-01 (US, J) 3-091-339-01

(EXCEPT US, J)

Battery charger (BC-CS2) (1)

0 1-477-814-11 (US, CND, JE, J) 0 1-477-814-22

(AEP, UK, E, HK, AR, AUS)

0 1-477-814-33 (CH, KR)

Wrist strap (1) 3-089-555-01

Power cord (1)

0 1-769-608-11 (AEP, E) 0 1-776-985-11 (KR) 0 1-782-476-13 (CH) 0 1-783-374-11 (UK, HK) 0 1-783-952-21 (AR) 0 1-790-107-22 (US, CND) 0 1-790-732-12 (JE, J) 0 1-827-945-11 (AUS)

Other accessories

3-091-340-01 MANUAL, INSTRUCTION (for BASIC) (JAPANESE) (J) 3-091-340-11 MANUAL, INSTRUCTION (ENGLISH)

3-091-340-21 MANUAL, INSTRUCTION (FRENCH, ITALIAN) (CND, AEP) 3-091-340-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE)

3-091-340-41 MANUAL, INSTRUCTION (GERMAN, DUTCH) (AEP)

3-091-340-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE,

3-091-340-61 MANUAL, INSTRUCTION (RUSSIAN, SWEDISH) (AEP) 3-091-340-71 MANUAL, INSTRUCTION (ARABIC, PERSIAN) (E) 3-091-340-81 MANUAL, INSTRUCTION (KOREAN) (KR, JE) 3-091-340-91 MANUAL, INSTRUCTION (POLISH, CZECH) (AEP)

3-091-341-11 MANUAL, INSTRUCTION (HUNGARIAN, SLOVAK) (AEP) 3-091-347-01 MANUAL, INSTRUCTION (for APPLICATION) (J)

(US, CND, AEP, UK, E, HK, AUS, CH, JE)

(AEP, E, AR, JE)

SIMPLIFIED CHINESE) (E, CH, HK, JE)

9-876-733-41

The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

Sony EMCS Co.

— 6 —

Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.

2004D0500-1

Published by DI CS Strategy Div

3-091-340-11(1)

Getting started_______________________

Shooting still images_________________

Digital Still Camera

Operating Instructions

Before operating the uni t, ple ase read this manual thoroughly, and retain it for future reference.

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to the s e numbers whenever you call upon your Sony dealer regarding this pro duct.

Model No. DSC-P73/P93 Serial No.

DSC-P73/P93

Viewing still images__________________

Deleting still images _________________

Before advanced oper at ions ____________

Advanced still image shooting __________

Advanced still image viewing ___________

Still image editing _____________________

Still image printing ____________________ (PictBridge printer)

Enjoying movies ______________________

Enjoying images on you r co m put er______

Troubleshooting ______________________

Additional information__________________

Index _____________________________

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

For the Customers in the U.S.A.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” withi n the p r o duct’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

If you have any questions about this product, you may call:

Sony Customer Information Services Center 1-800-222-SONY (7669)

The number below is for the FCC related matters only.

Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: DSC-P93 Responsible Party:Sony Electronics Inc. Address: 16450 W. Bernardo Dr,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230 This device complies with Part 15 of the

FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfe rence, a nd (2) this device mus t acce pt an y in t erference received, including interference that may cause undesired operation.

Declaration of Conformity

Trade Name: SONY Model No.: DSC-P73 Responsible Party:Sony Electro n ics In c. Address: 16450 W. Bernardo Dr,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, an d (2) this device must acc ep t any interference received, including interference that may cause undesired operatio n.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void you r au thority to operate this equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits a re designed to provide reasonable protection against ha r mful interference in a residential installation. This equipment generates, use s, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to co rrect t he int erferen ce by one or more of the following measures:

—Reorient or relocate the receiving antenna. —Increase the separation between the

equipment and receiver.

—Connect the equipment into an outlet on a

circuit different fro m that to which the receiver is connected.

—Consult the dealer or an experien ced

radio/TV technician for help. The supplied interface cable m u st be use d with the equipment in order to comply wit h the limits for a digital device purs ua nt to Subpart B of Part 15 of FCC Rules.

For the Customers i n the U .S.A. and Canada

RECYCLING NICKEL METAL HYDRIDE BATTERIES

Nickel Metal Hydride batt e ri es are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Nickel Metal Hydride batt e ri es .

Notice for the customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to th is equipm ent for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with or mark) must be used.

If the plug supplied with this equipm e nt ha s a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

For the Customers in Europe

This product has been tested and found compliant with the limits sets out in the E MC Directive for using connection cables shorte r than 3 meters (9.8 feet).

Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound of this digital camera .

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disc onnect and connect the USB cable again.

Certain countries or regions may regulate disposal of the battery used to power this product. Please consult with your loca l authority.

“Memory Stick”

Read this first

N50

For the Customers in the U.S.A. and Canada

THIS CLASS B DIGITAL DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND THE CANADIAN ICES-003 OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THA T MAY CAUSE UNDESIRED OPERATION.

Trial recording

Before you record one-time events, you may want to make a tr ial recording to mak e su r e that the camera is working correc tl y.

No compensation for contents of the recording

Contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunctio n of you r camera or recording medium, etc.

Back up recommendation

To av oid the potential risk of data loss, always copy (back up) data to a disk.

Notes on image data compatibility

• This camera conforms with the D e sign rule

for Camera File system universal standard established by the JEITA (Japan Electronics and Information T echnology Industries Association).

• Playback of images recorded with your

camera on other equipm ent and playb a c k of images recorded or edited with othe r equipment on your camera are not guaranteed.

Precaution on copyright

Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized record ing of such ma teria ls may be contrary to the provision of the copyright laws.

Do not shake or strike the camera

In addition to malfunc tions and inability to record images, this may render the “Memory Stick” unusable or image data brea kdown, damage or loss may occur.

LCD screen, LCD finder (only models with an LCD finder) and lens

• The LCD screen and the LCD f ind er are

manufactured using extremely highprecision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points ( white, red, blue or green in color) that constantly ap pe ar on the LCD screen and the LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way.

• Be careful when pla cin g the camera near a

window or outdoors. Exposing the LCD screen, the finder or the lens to direct sunlight for long periods may c au se malfunctions.

• Do not press the LCD screen hard ly. The

screen may be uneven and that may cause a malfunction.

• Images may be trailed on the LCD screen in

a cold location. Th is is not a malfunction.

Remove dirt from the surface of the flash

If the dirt changes color or sticks to the surface of the flash du e to the heat of the fla sh, sufficient light may not be emitted.

The power zoom lens

This camera is equipped with power zoom lens. Be careful not to bump the lens, and be careful not to apply force to it.

Do not get the camera wet

When taking pictures outdoors in the rain or under similar conditions, be careful not to get the camera wet. If water gets insid e of the camera, it may cause the camera to malfunction, sometimes beyond repair. If moisture condensation oc curs, see page 118 and follow the instructions on how to remove it before using the camera.

Do not expose the camera to sand or dust

Using the camera in sandy or dusty loca tions may cause a malfunction.

Do not aim the camera at the sun or other bright light

This may cause irrecoverable damage to your eyes or the malfunction of your camera .

Note on locations where you can use the camera

Do not use the camera near a location that generates strong radio waves or emits radiation. The camera may not be able to record or play back properly.

The pictures used in this manual

The photographs used as examples of pictures in this manual are reproduced images, a nd are not actual images shot using this camera.

Trademarks

• is a trademark of Sony

Corporation.

• “Memory Stick,” , “Memory Sti ck

PRO,” , “Memory Stick Duo,” , “Memory Stick PRO Duo,” , “MagicGate,” are trademarks of Sony Corporation.

• Picture Package is a trademark of Sony

Corporation.

• Microsoft, Windows, WindowsMedia, and

DirectX are either registered trademarks or trademarks of Microsoft Cor por a tion in the United States and/or other countries.

• Macint osh , Mac OS and QuickTime are

trademarks or registered trademarks of Apple Computer, Inc.

• Macromed ia and Flash are trademarks or

registered tradem arks of Macromedi a, Inc. in the United States and/or other count ri es .

• Intel, MMX, and Pentium are tra d e marks or

registered trade marks of Intel Corporation.

• In addition, system and product names used

in this manual are, in gene ra l, tr ademarks or registered trademarks of their respective developers or manufacturers. However, the

™

or ® marks are not u sed in all ca se s in th is

manual.

Table of contents

Read this first............................................4

Identifying the parts..................................8

Mode dial............................... .............10

Getting started

Preparing batteries..................................11

Charging the batteries.............................11

Inserting the batteries..............................13

Using the AC Adaptor............................16

Using your camera abroad......................17

Turning your camera on/off.................. ..17

How to use the control button.................18

Setting the date and time.........................18

Shooting still images

Inserting and removing a “Memory Stick”

........................................................21

Setting the still image size......................22

Image size and quality ............................23

Basic still image shooting

– Using auto mode..........................25

Checking the last image shot

– Quick Review................... ...........27

Using the zoom feature.......................27

Shooting close-ups – Macro...............29

Using the self-timer............................30

Selecting a flash mode........................31

Shooting images with the finder.........33

Inserting the date and time on a still

image..............................................34

Shooting according to scene conditions

........................................................35

Viewing still images

Viewing images on the LCD screen of your

camera............................................ 38

Viewing images on a TV screen............. 40

Deleting still images

Deleting images........................... ........... 42

Formatting a “Memory Stick”................ 44

Before advanced operations

How to setup and operat e your camera

........................................................46

Changing menu settings..................... 46

Changing item s in the SET UP screen

........................................................47

Deciding the still image quality.............. 47

Creating or selecting a folder................. 48

Creating a new folder.........................48

Selecting the recording folder............ 48

Advanced still image shooting

Choosing an auto focus method..............49

Choosing a focus range finder frame

– AF range finder............................49

Choosing a focus operation

– AF Mode......................................50

Setting the distance to the subject

– Focus preset .................................51

Shooting with manual shutter speed and

aperture settings

– Manual Exposure......................... 52

Adjusting the exposure

– EV adjustment.............................55

Displaying a histogram.......................56

Selecting the metering mode...................57

Adjusting color tones – White Ba lance...58 Adjusting the flash level – Flash Level...59

Shooting images in succession................60

Shooting in Multi Burst mode

– Multi Burst...................................61

Shooting with special effects

– Picture Effect...............................62

Advanced still image viewing

Selecting the folder and playing ba ck

images – Folder .... ..........................63

Enlarging a portion of a still image

– Playback zoom.............................64

Playing back successive images

– Slide show....................................65

Rotating still images – Rotate.................66

Playing back images shot in Multi Burst

mode ...............................................6 6

Playing back continuously..................67

Playing back frame by frame..............67

Still image editing

Protecting images – Protect.....................68

Changing image size – Resize.................69

Choosing im ages to print

– Print (DPOF) mark......................70

Still image printing (PictBridge printer)

Connecting to a P ictBridge comp liant

printer..............................................72

Printing images........................................73

Printing index-images.............................75

Enjoying movies

Shooting movies......................................79

Viewing movies on the LCD screen .......8 0

Deleting movies ....................... ...............81

Cutting movies........................................ 8 2

Enjoying images on your computer

Copying images to your computer

– For Windows users...................... 84

Installing the USB driver....................85

Connecting the camera to your computer

........................................................ 86

Copying images..................................8 7

Viewing the images on yo ur computer

........................................................ 89

Image file storage destinations and file

names..............................................90

Viewing an image previously copied to a

computer.........................................92

Installing “Picture Package”...............92

Copying images using “Picture Package”

........................................................ 94

Using “Picture Package”....................95

Copying images to your computer

– For Macintosh users....................96

Using “ImageMixer VCD2”............... 97

Troubleshooting

Troubleshooting......................................99

Warnings and messages........................108

Self-diagnosis display – If a code star ting

with an alphabet lette r appears..... 110

Additional information

The number of images that can be saved/

shooting time.................................111

Menu items............................................112

SET UP items....................... .................116

Precautions............................................118

The “Memory Stick”....................... ......119

The nickel-metal hydride batteries........120

The battery charger.......................... ......121

Specifications........................................121

The LCD screen ....................................124

Index

Index......................................................128

Identifying th e parts

See the pages in parentheses for details of operation.

A POWER button (17) B POWER lamp (17) C Shutter button (25) D Mode dial (10) E Flash (31) F Self-timer lamp (30)/

AF illumina tor (32, 116)

G Speaker (bottom surface) H Finder window I Lens ring J Lens K Microphone

Removing

Attaching

L Tripod receptacle (bottom

surface)

• The lens ring is removable so that you can

attach an adaptor ring (not supplied).

• Use a tripod with a screw length of less than

5.5 mm (

/32 inch). You will be unable to firmly secure the camera to tripods having longer screws, and may damage the camera.

A Control button

Menu on: v/V/b/B/z (18) Menu off: //7/ (31/30/ 27/

29)

Mode dial “M”: Shutter speed/ aperture value (52)

B Finder (33)

Self-timer/recording lamp (red) (30/26)

AE/AF lock lamp (green) (26)

(Flash charge) lamp

(orange) (31)

C LCD screen

For details on the items on the LCD screen, see pages 124 to 127.

D (LCD status/LCD on/off)

button (33)

E MENU button (46, 112) F RESET button (99) G DC IN jack (16)

(USB) jack (86)

H I A/V OUT (MONO) jack (40) J (Image Size/Delete)

button (22, 42)

K Zoom (W/T) buttons (27)/

(Index) button (39)/

/ (Playback zoom) buttons

(64)

L Access lamp (21) M OPEN button (13) N Battery/“Memory St ick” cover

(13)

O Battery insertion slot (13) P “Memory Stick” insertion slot

(21)

Q Jack cover (16) R Hook for wrist strap (bottom

surface)

Attachin g th e wrist stra p .

Mode dial

Before using your camera , set th e mark on the mode dial to the POWER butt on si de.

(Auto adjustment mode)

The focus, exposure and white balance are automatically adjusted to allow easy shooting. The image quality is set to [ F in e] (page 47).

P (Program auto shooting)

Shooting ad justment is automatic ally carried out just as in th e auto adju stment mode. However, you ca n intentionally adjust the focus, etc. In addition, you can set the desired functions using the menu (pages 46 and 112).

M (Manual exposure shooting)

You can manually adjust the shutter speed and the aperture value (page 52). In addition, you can set the desire d shoot in g functions using menus (pages 46 and 112).

(Movie shooting)

You can shoot movies (page 79).

(Playback/Editing)

You can play back or edit still images or movies (pages 38 and 68).

(Twilight)

(Twilight portrait)

(Candle)

(Landscape)

(Beach)

(Soft snap)

You can easily shoot an effe c ti ve photo based on the scene conditions in the scene (page 35). In addition, you can set the desired shooting functions using menus (pages 46 and 114).

SET UP (Set up)

You can change t he s ettings of the camera (pages 47 and 116).

Preparing batt eries

Getti

Use the following batteries in this camera.

Acceptable batteries

HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries (2)

– NH-AA-DA (2) (supplied) – NH-AA-2DA twin-pack, etc. (not

supplied)

R6 (size AA) alkaline batteries (2)

Batteries that cannot be used

Manganese batteries Lithium batteri es Ni-cad batteries

If you use the batteries described above, we cannot guarantee full performance of the camera by property of the batteries, such as brownout of the batteries.

Notes on alkaline batteries

• Alkaline batteries have a shorter life compared

to the supplied Nickel-Metal Hydride batteries. The power may shut off even if the battery remaining indicator shows sufficient battery life remaining.

• There is a big difference in the performance of

batteries of different types and of batteries made by different manufacturers. This is especially true in low temperatures, where some batteries are noticeably weaker. You may not be able to shoot in temperatures below 5°C (41°F).

• Do not mix new and old batteries.

• The battery remaining indicator does not

display the correct information.

• There is a big difference between available

shooting time and available playback time. Due to the characteristics of alkaline batteries, the camera may shut off with the lens portion extended if you change the position of the mode dial. In this case, replace the batteries with new ones or fully charged Nickel-Metal Hydride batteries.

It is recommend that you use the supplied Nickel-Metal Hydride batteries.

ng starte

Charging the batteries

Getting started

, Insert Nickel-Metal Hydride

batteries into the batte ry charger (supplied) with the correct po larity +/–.

• You cannot charge alkaline batteries using the battery charger.

• Be sure to charge the Nickel-Metal Hydride batteries supplied with your camera before using them.

• Connect the battery charger to an easily

accessible wall outlet (wall socket) close by.

• Even if the CHARGE lamp is not lit, the set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occur s while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

CHARGE lamp

to a wall outlet (wall socket)

Power cord (Mains lead)

, Connect the battery charger to

a wall outlet (wall socket) using the power cord (mains lead).

Charging starts, and the CH A RGE lamp lights. When the CHARGE lamp goes out, charging is finished. For details on the battery charger, see page

121.

To remove the batteries

Press the - end of the battery down in order to raise the + end, then remove the battery.

• When charging is finished, disconnect the

power cord (mains lead) from the wall outlet (wall socket), and remove the Nickel-Metal Hydride batteries from the battery charger.

Charging time

Nickel-Metal Hydride battery

NH-AA-DA × 2

(supplied)

This represents the time required to charge fully depleted Nickel-Metal Hydride batteries using the supplied battery charger in an environment where the ambient temperature is 25°C (77°F).

• Charging is complete in approximately six

hours. The CHARGE lamp may remain lit longer than six hours, but this is not a malfunction.

• If you use the BC-CSQ2 battery charger

supplied with the STAMINA “Super Quick charge” kit (not supplied), the batteries will charge faster. Charging time When charging two Nickel-Metal Hydride batteries: Approximately 2 hours 30 minutes When charging four Nickel-Metal Hydride batteries: Approximately 5 hours

Charging time

Approx. 6 hours

Notes on the Nickel-Metal Hydride batteries

• At the time of purchase, or when the Nickel-Metal Hydride batteries have not been used for a long time, they may not be fully charged. This is typical of this type of battery, and is not a malfunction. If this happens, repeatedly using up the battery fully, and then recharging it, should correct the problem.

• If the poles of the Nickel-Metal Hydride

batteries are dirty, the batteries may not be charged properly. Occasionally clean the poles of the batteries and the terminals of the charger by wiping them with a dry cloth.

• When transporting the Nickel-Metal Hydride batteries, be sure to use the battery case (supplied). If the +/- metal termi nal s are shorted, there is a possibility of danger from excessive heat or fire.

• Even when Nickel-Metal Hydride batteries are not being used they lose their charge naturally over time. It is recommended that you recharge the batteries just before using them.

• If you recharge Nickel-Metal Hydride batteries before fully using up the existing charge, the so-called memory effect* can occur, and the low battery warning will be triggered sooner than expected. Charging the battery after fully depleting the existing charge should correct the problem.

* The “memory eff ect” – the sit uation in which a

battery temporarily accepts a less than full charge.

Inserting the batteries

• To use up the batteries completely, put the

camera in the slide show mode (page 65) and leave it that way until the batteries are used up.

• Do not peel off the external seals or damage the

batteries. Never use batteries from which the seals have been partially or completely removed, or batteries that have been split in any way. These may cause leakage, explosion, or heat-up of the battery, and personal scald or injury may be caused. These may cause a malfunction of the battery charger.

, Open the battery/“Mem ory

Stick” cover.

Turn up the battery/“Memory Stick” cover, and slide the cover in the di r ection of the arrow.

Getting started

, Insert the batteries.

Match the +/- poles of the b atte rie s to th e +/

- marks inside the battery case.

• Occasionally clean the poles of the batteries

and the terminals of the battery/“Memory Stick” cover by wiping them with a dry cloth. If the poles of the batteries or the terminals become covered with a film of dirt or oil from the skin, the operating time of the camera can be greatly reduced.

, Close the battery/“Memory

Stick” cover.

Close the battery/“Memory Stick” cover while holding the batteries in. The cover is closed when it cl icks.

To remove the batteries

Turn up the battery/“Memory Stick” cover, open the battery/“Memory Stick” cover, then remove the batteries.

• Make sure you do not drop the batteries when

opening or closing the battery/“Memory Stick” cover.

Battery remaining indicator (When using the Nickel-Metal Hydride batteries)

As the battery po wer decrease s with use, the battery remaining indicator displ ay s the amount of power remaini ng using the following symbols.

Battery remaining indicator

Battery remaining guidelines (A full charge is 10 0%)

Sufficient power remaining Battery half full Battery low, recording/

playback will stop soon. Change the batteries for fully

charged ones, or charge these batteries. (The warning indicator flashes.)

• If the LCD screen is off, press to turn it on.

• Based on the conditions under which the camera is being used and the state of the charge, or on the environment, this inf o rmatio n may not be correctly indicated.

• When using alkaline batteries, the correct battery remaining time is not indicated. There is a big difference in the performance of batteries of different types and of batteries made by different manufacturers, the power may shut off even if the battery remaining indicator shows sufficient battery life remaining. In this case, replace the batteries with new ones or fully charged Nickel-Metal Hydride batteries.

• When the AC Adaptor (not supplied) is being used, the remaining battery information is not displayed.

Number of images and battery life that can be recorded/ viewed

The tables show the approximate number of images and the battery life that can be recorded/ viewed when you shoot images in normal mode with fully charged batteries at a temperature of 25°C (77°F). The numbers of images that can be recorded or viewed take into account changing the supplied “Memory Stick” as necessary . Note that the actual numbers may be less than indicated depending on the conditions of use.

• The battery capacity decreases little by little as

you use it more and more, and as time passes (page 120).

Shooting s till images Under the average conditions

NH-AA-DA (2) (supplied)

Image

LCD screen

No. of images

size

DSC-P93 5M VGA

(E-Mail)

On Off On Off

Approx. 410 A pprox. 205 Approx. 740 A pprox. 370 Approx. 410 A pprox. 205 Approx. 740 A pprox. 370

DSC-P73 4M VGA

(E-Mail)

On Off On Off

Approx. 420 A pprox. 210 Approx. 760 A pprox. 380 Approx. 420 A pprox. 210 Approx. 760 A pprox. 380

Battery life (min.)

R6 (Size AA) alkaline battery (2) (not supplied)

Image

LCD

size

screen

No. of images

Battery life (min .)

DSC-P93 5M VGA

(E-Mail)

On Off On Off

Approx. 80 Approx. 40

Approx. 180 Approx. 90

Approx. 80 Approx. 40

Approx. 180 Approx. 90

DSC-P73

Off On

VGA (E-Mail)

Off

When using Sony alkaline batteries

Shooting in the following situations:

– The image quality is set to [Fine] – [AF Mode] is set to [Single] – Shooting one time every 30 seconds – The zoom is switched alternately between the

W and T ends

– The flash strobes once every two times – The power turns on and off once every ten

times The measurement method is based on CIPA standard. (CIPA: Camera & Imaging Pro d ucts Association)

Approx. 110 Approx. 55 Approx. 240 Approx. 120 Approx. 110 Approx. 55 Approx. 240 Approx. 120

Viewing still images

NH-AA-DA (2) (supplied)

Image size

No. of images

Battery life (min.)

DSC-P93 5M VGA (E-Mail)

Approx. 9200 Approx. 9200

Approx. 460

Approx. 460 DSC-P73 4M VGA (E-Mail)

Viewing single images in order at about three second intervals

Shooting movies

Approx. 9800 Approx. 9800

Approx. 490

NH-AA-DA (2) (supplied)

LCD screen On

LCD screen Off

DSC-P93 Approx. 210 Approx. 270 DSC-P73 Approx. 210 Approx. 270

Shooting continuously at [160] image size

Getting started

Using the AC Adaptor

• The number of images and the battery life that

can be recorded/viewed are decreased under the following conditions:

– The surrounding temperature is low – The flash is used – The camera has been turned on and off many

times

– The zoom is used frequently – [LCD Backlight] is set to [Bright] in the SET

UP settings

– [AF Mode] is set to [Monitor] – The battery power is low.

AC Adaptor (not supplied)

DC plug

Jack cover

, Open the jack cover, then

connect the AC-LS5 AC Adaptor (not supplied) to the DC IN jack of the camera .

Connect the plug with the v mark facing up.

• Be sure to use the AC-LS5 AC Adaptor. Other AC adaptors cannot be used with this camera.

• Connect the AC Adaptor to an easily a ccessible

wall outlet (wall socket) close by. If some trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

2 To a wall outlet (wall socket)

Power cord (mains lead)

, Connect the power cord (mains

lead) to the AC Adaptor and to a wall outlet (wall socket).

• When you have finished using the AC Adaptor,

disconnect it from the DC IN jack of the camera and the wall outlet (wall socket).

• The set is not disconnected from the AC power

source (mains) as long as it is connected to the wall outlet (wall socket), even if the unit itself has been turned off.

Using your camera abroad

Power sources

You can use your camera in any country or region with the battery charger (supplied) or AC Adaptor (not supplied) within 100 V to 240 V AC, 50/60 Hz. Use a comm ercially available AC pl ug adapto r [a], if nece ssary, depending on the design of the wall outlet (wall socket) [b].

BC-CS2A/CS2B

• Do not use an electrical transformer (travel

converter), as this may cause a malfunction.

Turning your camera on/off

POWER

POWER lamp

, Press POWER to turn on the

power.

The POWER lamp lights in green and the power is on. When you turn on t he camera for the first time, the Clock Set screen appears (page18).

To turn off the power

Press POWER again, the POWER lamp goes out, and the cam era turns off.

• When you turn the power on with the mode dial

not set to SET UP or , the lens begins to move. Please be careful not to touch the lens.

• Do not leave the camera with the lens portion pulled out by removing the batteries or AC Adaptor (not supplied), etc., for a long time. This may cause a malfunction.

The Auto Power Off function

If no tasks are performed for about three minutes when shootin g, view ing images, or setting up the camera while using the batteries, power is automatically shut off to preserve battery power. However, in the following circum stances, even if the batteries are being used to power the camera, the Auto Power Off function will not work.

• Movies are being played back

• A slide show are being sh own

• A cable is connected to the (USB) jack or the A/V OUT (MONO) jack

Getting started

How to use the control button

Setting the date and time

Camera

AF Mode:

Single

Digital Zoom:

Smart

Date/Time:

Off

Red Eye Reduction

Off Auto

AF Illuminator: Auto Review: Off

SELECT

Setup 2 File Number: USB Connect:

Video Out:

Cancel

Clock Set:

To change the current settings of the camera, bring up the menu or the SET UP screen (pages 46, 47), an d use t he cont rol button to make the ch anges. When setting up the menu, press v/V/b/B to select the item or the setting and make the setting. When setting up the SET UP, press v/V/b/

B to select the item or the setting and press z to make the setting.

Mode dial

, Set the mode dial to .

• To set the time and the date again, set the mode dial to SET UP, select [Clock Set] in (Setup 2) (pages 47,

117), then proceed from Step 3.

• You can carry out this operation even when the

mode dial is set to P

, M, , , , ,

, or .

Clock Set

2004 11//

12 :

Y/M/D M/D/Y D/M/Y

Cancel

, Press POWER to turn on the

power.

The POWER lamp lights in green and the Clock Set screen appears on the LCD screen.

Clock Set

2004 11// 00

12 :

Y/M/D M/D/Y D/M/Y

Cancel

Clock Set

2004 11// 00

12 :

Y/M/D M/D/Y D/M/Y

Cancel

Clock Set

2005 11// 00

10 :

Y/M/D M/D/Y D/M/Y

Cancel

Getting started

, Select the desired date format

with v/V on the control button, then press z.

You can select from [Y/M/D] (year/month/ day), [M/D/Y], and [D/M/Y].

• If the rechargeable button battery, which

provides the power for saving the time data, is ever fully discharged (page 119), the Clock Set screen will appear again. When this happens, reset the date and time by starting from Step 3 above.

, Select the year, month, day,

hour, or minute item you want to set with b/B on the control button.

v is shown above and V is shown below the selected it em.

, Set the desired numerical

value with v/V on the control button, then press z.

After setting the current nume rical value, set the next item. Repeat Steps 4 and 5 until all of the items have been set.

• If you select [D/M/Y] in Step 3, set the time

on a 24-hour cycle.

• 12:00 AM stands for midnight and 12:00 PM

stands for noon.

Clock Set

2005 11// 30

, Select [OK] with B on the

control button, then press z.

The date and time are set and the clock w ill start to kee p ti me.

• To cancel the setting process, select [Cancel],

then press z.

10 :

Y/M/D M/D/Y D/M/Y

Cancel

Inserting and removing a “Memory Stick”

Shooti

till i

ng s

mage

1 2

, Open the battery/“Memory

Stick” cover.

Turn up the battery/“Memory Stick” cover, and slide the cover in the direction of the arrow.

• Be careful not to drop the batteries when

opening or closing the battery/“Memory Stick” cover.

• For details on “Memory Stick,” see page 119.

Terminal side

Label side

, Insert the “Memory Stick.”

Insert the “Mem ory Stick” all the wa y in until it clicks as shown in the illustration.

• Whenever you insert a “Memory Stick,” push it

as far as it can go. If you do not insert it correctly, a proper recording or playback may not be carried out.

Access lamp

, Close the battery/“Memory

Stick” cover.

To remove the “Memory Stick”

Open the battery/“Memory Stick” cover, then push the “Memory Stick” to pop it out.

• Whenever the access lamp is lit, the camera is recording or reading out an image. Never open the battery/“Memory Stick” cover or turn off the power at this time. The data may be corrupted.

Shooting still imag e s

Setting the still image size

Mode dial

, Set the mode dial to and

turn on the power.

• You can carry out this operation even when the

mode dial is set to P, M, , , , , or .

DSC-P93 DSC-P73

3:2 3M 1M

(

E-Mail

VGA

Image Size

3:2 3M

)

1M VGA

Image Size

(

E-Mail

)

, Press (Image Size).

The Image Size setup item appears.

• For more information about the image size, see

page 23.

DSC-P93 DSC-P73

5M 3:2 3M 1M

)

VGA(E-Mail

Image Size

VGA

4M 3:2 3M 1M

)

VGA(E-Mail

Image Size

VGA

, Select the desired image size

with v/V on the control button.

The image size is set. After the setting is completed, press

(Image Size). The Image Size setup item disappears from the LCD screen.

• This setting is maintained even when the power

is turned off.

Image size and quality

You can choose image si ze (number of pixels) and im age quality (c ompression ratio) based on the kind of images you want to shoot. The image size is shown by the number of pixels (dots) (ho riz ont al × vertical) , wh ich compose an image. For example, a 5M (2592×1944) siz e im ag e indicates that there are 2592 pixels horizontally 1944 vertically. The larger the number of pixels, the larger th e image size. You can select an image quality level from Fine (high quality) or Standard. Each has a different compressio n rat io . When you select Fine and ma ke t he image size larger, you get better quality. However, the amount of data needed to preserve your image is larger and the number of images recordable in the “ Memo ry St ick” is fe wer. Choose an image size and qu al it y le ve l appropriate to the kind of images you want to shoot by checking the table below.

The default setting is [5M] (DSC-P93) or [4M] (DSC-P73). This size can give the highest image quality using each camera.

This option records images in a horizontal to vertical proportion of 3:2 to match the size of the print paper used.

Short description of the image size

The following illustration shows a brief image using the maximum image size and the minimum one.

[a]:Display size: 5M

Image size: 5M

[a]

2592 pixels × 1944 pixels = 5038848 pixels

[b]

[b]:Display size: 4M

Image size: 4M 2304 pixels × 1728 pixels = 3981312 pixels

[c]:Display size: VGA (E-Mail)

Image si ze: VGA

[c]

640 pixels × 480 pixels = 307200 pixels

640

2592

2304

480

1728

1944

Examples based on the image size and image quality

Image size Examples

5M 1) (2592×1944) (DSC-P93)

3:2 2) (2592×1728) (DSC-P93)

4M 1) (2304×1728) (DSC-P73)

3:2 2) (2304×1536) (DSC-P73)

3M (2048×1536) 1M (1280×960) VGA (E-Mail)

(640×480)

Larger

Smaller

• For printing A4 size or fine A5 size images.

• For printing postcard size images.

• For shooting a lot of images, attaching images to e-mail, or posting images to your home page.

Shooting still imag e s

Image quality

Examples

(Compression ratio)

Fine

Standard

Low compression (looks better)

High compression (normal)

• To shoot or print with better quality.

• To shoot more images.

The number of images that can be saved in a “Memory Stick”

The number of i mages that can b e s aved in Fine ( S tandard)4) mode are shown below. (Units: number of image s )

Capacity

Image

16MB 32MB 64MB 128MB MSX-256 MSX-512 MSX-1G

size

5M (DSCP93)

3:2 (DSCP93)

4M (DSCP73)

3:2 (DSCP73)

6 (11) 12 (23) 25 (48) 51 (96) 92 (174) 188 (354) 384 (723)

8 (14) 16 (30) 32 (60) 65 (121) 119 ( 216) 242 (440) 494 (898)

3M 10 (18) 20 (37) 41 (74) 82 (149) 148 (264) 302 (537) 617 (1097) 1M 24 (46) 50 (93) 101 (187) 202 (376) 357 (649) 726 (1320) 1482 (2694) VGA (E-

Mail)

When [Mode] (RE C M o de) is set to [Norma l ] For the number of images that can be saved in other modes, see page 111.

For more information about the image quality (compre s sion ratio) s et up, see page 47.

97 (243) 196 (491) 394 (985) 790 (1975) 1428 (3571) 2904 (7261)

5928

(14821)

• When the images recorded using other Sony

devices are played back, the image size indication may be different from the actual image size.

• When the images are viewed on the LCD

screen of the camera, they all look the same size.

• Number of shooting images can differ from

these values according to shooting conditions.

• When the remaining number of images

recordable is more than 9999, “>9999” is indicated.

• You can resize the images later (Resize

function, see page 69).

+ 109 hidden pages