SONY DSC-M1 Service Manual L1 V1.1.

DSC-M1
SERVICE MANUAL
Ver 1.1 2005. 12
Revision History
Revision History
Link
Link
ACCESSORIES
ACCESSORIES
LEVEL 1
DSC-M1
US Model
Canadian Model
Australian Model
Chinese Model
E Model
Tourist Model
Hong Kong Model
Korea Model
Japanese Model
SELF DIAGNOSIS FUNCTION
SELF DIAGNOSIS FUNCTION
• INSTRUCTION MANUAL is shown at the end of this document.
DIGITAL STILL CAMERA
DSC-M1
9-876-778-41
Sony EMCS Co.
2005L1600-1
©2005.12
Published by DI Technical Support Department

SPECIFICATIONS

x Camera [System]
Image device
Total pixels number of camera
Effective pixels number of camera
Lens Carl Zeiss Vario-Tessar
Exposure control
White balance
File format (DCF compliant)
Recording media
Flash Recommended distance (ISO set to
7.66 mm (1/2.4 type) color CCD Primary color filter
Approx. 5 255 000 pixels
Approx. 5 090 000 pixels
3 zoom lens f = 6.7 – 20.1 mm (38 – 114 mm converted to a 35 mm still camera) F3.5 – 4.4
Automatic exposure, Scene (9 modes)
Automatic, Daylight, Cloudy, Fluorescent, Incandescent, Flash
Still images: Exif Ver. 2.2 JPEG compliant, DPOF compatible Movies: MPEG4 compli
“Memory Stick Duo”
Auto):
0.3 m to 1.8 m (11 7/8 inches to 70 7/8 inches) (W)
0.5 m to 1.7 m (19 3/4 inches to 67 inches) (T)
when
selection
ant (Stereo)
[Input and Output connectors]
Multi connector USB communication
Hi-Speed USB (USB 2.0 compli
[LCD screen]
LCD panel
Total number of dots
6.2 cm (2.5 type) TFT drive 123 200 (560×220) dots
[Power, general]
Used battery pack
Power requirements
NP-FT1
3.6 V
ant)
Power consumption (during normal shooting)
Operating temperature
Storage temperature
Dimensions
Mass Approx. 220 g (8 oz) (including
Microphone
Speaker Piezoelectric speaker Exif Print Compatible
PRINT Image Matching II
PictBridge
1.4 W 0°C to +40°C (+32°F to +104°F) –20°C to +60°C (–4°F to +140°F)
51.0×114.0×27.8 mm (2 1/8×45/8×1 1/8 inches) (W/H/D, excluding maximum protrusions)
battery pack NP-FT1, “Memory St ick Duo” and wrist strap)
Electret condenser microphone
Compatible
Compatible
x UC-MA Cyber-shot Station [Input and Output connectors]
A/V OUT (STEREO) jack (Stereo)
USB jack B USB connection
DC IN jack Camera connector
Minijack Video: 1 Vp-p, 75 , unbalanced,
sync negative
Audio: 327 mV (at a 47 k load)
Output impedance 1 k
High-Speed USB (USB 2.0 High-Speed compatible)
x AC-LM5/LM5A AC Adaptor
Input rating
100 V to 240 V AC, 50/60 Hz
AC-LM5
10 W
AC-LM5A
11 W
Output rating
Operating temperature
Storage temperature
Dimensions
Mass AC-LM5
4.2 V DC, 1.5 A 0°C to +40°C (+32°F to +104°F) –20°C to +60°C (–4°F to +140°F)
AC-LM5
Approx. 47×30×80 mm (1 7/8×1 3/16×3 1/4 inches)
AC-LM5A
Approx. 48×29×81 mm (1 15/16×1 3/16×3 1/4 inches) (W/H/D, excluding projecting parts)
Approx. 170 g (6.0 oz)
AC-LM5A
Approx. 160 g (5.6 oz) excluding power cord (mains lead)
x NP-FT1 battery pack
Used battery
Maximum voltage
Nominal voltage
Capacity 2.4 Wh (680 mAh)
Lithium-ion battery
DC 4.2 V
DC 3.6 V
x Accessories
AC-LM5/LM5A AC Adaptor (1) Power cord (mains lead) (1) Cyber-shot Station UC-MA (1) NP-FT1 battery pack (1) Battery case (1) USB cable (1) A/V connecting cable (1) Wrist strap (1) “Memory Stick Duo” (32 MB) (1) Memory Stick Duo Adaptor (1) CD-ROM (USB driver SPVD-012) (1) Operating instructions (1)
Design and specifications are subject to change without notice.
DSC-M1
2
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.
2. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair . Point them out to the customer and recommend their replacement.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
4. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270˚C during repairing.
Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering or unsoldering.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DSC-M1
3

Checking supplied accessories.

Make sure that the following accessories are supplied with your camcorder.
Power cord (Main lead) (1) (E model)
0
1-769-608-11 Power cord (Main lead) (1) (CH model)
0
1-782-476-13 Power cord (Main lead) (1) (HK model)
0
1-783-374-11 Power cord (Main lead) (1) (US/CND model)
0
1-790-107-22 Power cord (Main lead) (1) (JE model)
0
1-790-732-12 Power cord (Main lead) (1) (J model)
0
1-791-637-13 Power cord (Main lead) (1) (KR model)
0
1-823-947-11 Power cord (Main lead) (1) (AUS model)
0
1-827-945-11
AC-LM5/LM5A AC Adaptor (1)
0
1-477-730-61
CD-ROM (USB Driver SPVD-012.1) (1) 2-187-885-01
Cyber-shot station (UC-MA) (1) 1-818-873-11
A/V connecting cable (1) 1-765-080-62
USB cable (1) 1-827-754-21
Wrist strap (1) 2-320-915-01
2-pin conversion adaptor (1) (JE model) 1-569-007-12
2-pin conversion adaptor (1) (E model) 1-569-008-12
“Memory Stick Duo” (32MB)(1) (not supplied)
Memory Stick Duo adaptor(1) (not supplied)
Rechargeable battery pack (NP-FT1)(1) (not supplied)
Battery case (1) (not supplied)
Abbreviation CND : Canadian model AUS : Australian model CH : Chinese model HK : Hong Kong model KR : Korea model JE : Tourist model J : Japanese model
Other accessories
2-320-916-01 MANUAL, INSTRUCTION (JAPANESE)(J) 2-320-916-11 MANUAL, INSTRUCTION (ENGLISH)
(US/CND/E/HK/AUS/JE/CH) 2-320-916-21 MANUAL, INSTRUCTION (FRENCH)(CND) 2-320-916-31 MANUAL, INSTRUCTION (CHINESE)(E/HK/JE/CH) 2-320-916-41 MANUAL, INSTRUCTION (KOREAN)(KR/JE)
2-320-917-01 MANUAL, INSTRUCTION (JAPANESE)((J)
Note :
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
Note :
Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
DSC-M1
4
NOTE FOR REPAIR

SELF-DIAGNOSIS FUNCTION

Make sure that the flat cable and flexible board are not cracked of bent at the terminal. Do not insert the cable insufficiently nor crookedly.
Cut and remove the part of gilt which comes off at the point. (Take care that there are some pieces of gilt left inside)
When remove a connector, don't pull at wire of connector. Be in danger of the snapping of a wire.
When installing a connector, don't press down at wire of connector. Be in danger of the snapping of a wire.
[Discharging of the FLASH unit’s charging capacitor]
The charging capacitor of the FLASH unit is charged up to the maximum 300 V potential. There is a danger of electric shock by this high voltage when the capacitor is handled by hand. The electric shock is caused by the charged voltage which is kept without discharging when the main power of the DSC-T3 is simply turned off. Therefore, the remaining voltage must be discharged as described below.
Preparing the Short Jig
To preparing the short jig. a small clip is attached to each end of a resistor of 1 k /1 W (1-215-869-11) Wrap insulating tape fully around the leads of the resistor to prevent electrical shock.
Discharging the Capacitor
Short circuits between the positive and the negative terminals of charged capacitor with the short jig about 10 seconds.
1 k/1 W
Wrap insulating tape.
Caution
DSC-M1
Flash unit
5
Capacitor
Shorting jig
(1k
/ 1w)
[Description on Self-diagnosis Display]
Self-diagnosis display
C: ss: ss The contents which can be handled by customer, are displayed.
E: ss: ss The contents which can be handled by engineer, are displayed.
Display Code
C:32:01
C:13:01
Note: Add the sentence as follows.
If other codes are displayed, service is required. Please send the set to a specialized center.
Turn off the main power then back on.
Replace the memory stick. Format the memory stick with the DSC-T3.
Countermeasure
Cause
Trouble with hardware.
The type of memory stick that cannot be used by this machine, is inserted.
Data is damaged.
Unformatted memory stick is inserted.
Caution Display During Error
SYSTEM ERROR
MS ERROR
DSC-M1
6
2-320-916-11(1)
_
_
_
_
_
_
_
_
_
_
_
_
Getting started______________________
Shooting images____________________
Digital Still Camera
Operating Instructions
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the side. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. DSC-M1 Serial No.
DSC-M1
© 2004 Sony Corporation
Viewing images_____________________
Deleting images ____________________
Before advanced operations___________
Advanced shooting___________________
Advanced viewing____________________
Still image printing ___________________
Enjoying images on your computer
Troubleshooting _____________________
Additional information_________________
Index_______________________________
_______
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
For the Customers in the U.S.A.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
If you have any questions about this product, you may call:
Sony Customer Information Services Center 1-800-222-SONY (7669)
The number below is for the FCC related matters only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY Model No.: DSC-M1 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr,
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation.
Note:
Model DSC-M1 is to be used with the Cyber -s hot Station Model UC-MA and AC Adaptor Model AC-LM5/LM5A.
San Diego, CA 92127 U.S.A.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna. — Increase the separation between the
equipment and receiver.
— Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/
TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
2
For the Customers in the U.S.A. and Canada
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/
Caution:Do not handle damaged or leaking
Lithium-Ion batteries.
“Memory Stick”
For the Customers in the U.S.A. and Canada
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the USB cable again.
3
Read this first
Trial recording
Before you record one-time events, you may want to make a trial recording to make sure that the camera is working correctly.
No compensation for contents of the recording
Contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or recording media, etc.
Back up recommendation
To avoid the potential risk of data loss, always copy (back up) data to a disk.
Notes on image data compatibility
This camera conforms with the Design rule for
Camera File system universal standard established by the JEITA (Japan Electronics and Information Technology Industries Association).
Playback of images recorded with your camera
on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.
Precaution on copyright
Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provision of the copyright laws.
Do not shake or strike the camera
In addition to malfunctions and inability to record images, this may render the “Memory Stick Duo” unusable or image data breakdown, damage or loss may occur.
LCD screen, LCD finder (only models with an LCD finder) and lens
The LCD screen and the LCD finder are
manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen and the LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way.
Be careful when placing the camera near a
window or outdoors. Exposing the LCD screen, the finder or the lens to direct sunlight for long periods may cause malfunctions.
Do not press the LCD screen hardly. The screen
may be uneven and that may cause a malfunction.
Images may be trailed on the LCD screen in a
cold location. This is not a malfunction.
Lens cover
The lens cover of this camera opens and closes automatically when the camera is turned on and off. Be careful not to pinch your finger when the lens cover opens and closes. Also, do not attempt to forcibly open the lens cover, as this may cause malfunction.
Clean the flash surface before use
The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.
Do not get the camera wet
When taking pictures outdoors in the rain or under similar conditions, be careful not to get the camera wet. Water entering the inside of the camera may cause malfunctions which in some cases may not be repairable. If moisture condensation occurs, see page 118 and follow the instructions on how to remove it before using the camera.
Do not expose the camera to sand or dust
Using the camera in sandy or dusty locations may cause malfunction.
4
Do not aim the camera at the sun or other bright light
This may cause irrecoverable damage to your eyes. Or it may cause the malfunction of your camera.
Notes on the camera locations
Do not use the camera near a location that generates strong radio waves or emits radiation, or a location with a strong magnetic field. The camera may not be able to record or play back properly.
Carl Zeiss lens
This camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast. The lens for this camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.
The pictures used in this manual
The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.
5
Before using your camera
“Memory Stick” compatible with this camera
The IC recording medium used with this camera is the “Memory Stick Duo”. There are two sizes of “Memory Stick”. Choose the “Memory Stick” size that matches your camera.
“Memory Stick Duo” (Size used with this camera)
“Memory Stick”
For details on the “Memory Stick Duo”, see
page 119.
“Memory Stick PRO” and “Memory Stic k PR O
Duo” can be used only with “Memory Stick PRO” compatible equipment.
For the number of images that can be saved
using this camera, see page 27.
When using a “Memory Stick Duo” with “Memory Stick” compatible equipment
Be sure to insert the “Memory Stick Duo” into the supplied Memory Stick Duo Adaptor.
Memory Stick Duo Adaptor
On “InfoLITHIUM” battery pack
When using the battery pack for the first time
Be sure to charge the supplied NP-FT1 battery pack (page 14).
Recharging
The battery pack can be charged even when it has not been completely discharged. In addition, the battery pack can be used even if it has only been charged partway.
Extending the battery pack life
When not using the camera for a long time, turn off the camera, remove the battery pack and store it in a dry, cool place to maintain the battery pack functions (page 121).
For details on “InfoLITHIUM” battery pack,
see page 120.
6
Trademarks
is a trademark of Sony
Corporation.
“Memory Stick”, , “Memory Stick
PRO”, , “Memory Stick Duo”, , “Memory Stick PRO Duo”, , “MagicGate” and are trademarks of Sony Corporation.
“InfoLITHIUM” is a trademark of Sony
Corporation.
Picture Package is a trademark of Sony
Corporation.
Microsoft, Windows, Windows Media, and
DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Macintosh, Mac OS, QuickTime, iMac, iBook,
PowerBook, Power Mac and eMac are trademarks or registered trademarks of Apple Computer, Inc.
Macromedia and Flash are trademarks or
registered trademarks of Macromedia, Inc. in the United States and/or other countries.
Intel, MMX, and Pentium are trademarks or
registered trademarks of Intel Corporation.
In addition, system and product names used in
this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks are not used in all cases in this manual.
7
Table of contents
Read this first............................................4
Before using your camera. ........................6
Identifying the parts ............................... 10
Camera................................................10
Cyber-shot Station .............................. 12
How to handle the camera ..................13
Getting started
Charging the battery pack.......................14
Using the AC adaptor ............................. 18
Using your camera abroad ...................... 18
Turning on/off your camera....................19
How to use the control button................. 20
Adjusting the LCD screen.................... ... 20
Setting the date and time.........................21
Changing the language setting................ 22
Shooting images
Inserting and removing a “Memory Stick
Duo” ...............................................23
Setting the image size ............................. 24
Image size and quality ............................25
Number of images that can be recorded/
recording time.................................27
Basic shooting — Using auto adjustment
mode...............................................29
Hybrid shooting .................................. 32
Shooting a movie for 5 seconds..........34
Indicators on the LCD screen during
shooting ..........................................35
8
Using the zoom feature ...................... 35
Shooting close-ups — Macro............. 36
Using the self-timer............................ 38
Rotating the LCD screen
– Mirror mode................................ 39
Selecting a flash mode ....................... 39
Inserting the date and time on a still
image.............................................. 41
Viewing images
Viewing images on the LCD screen of your
camera............................................ 43
Viewing images on a TV screen.......... ... 46
Deleting images
Deleting images............. ... ...................... 49
Formatting a “Memory Stick Duo”........ 51
Before advanced operations
How to setup and operate your camera.. 53
Changing the menu settings ............... 53
Changing the items in the Setup screen
........................................................ 54
Deciding the still image quality.............. 54
Creating or selecting a folder ................. 55
Creating a new folder......................... 55
Changing the recording folder ........... 56
Advanced shooting
Choosing a focus method........................57
Setting the distance to the subject
— Focus preset...............................58
Adjusting the exposure
— EV adjustment ...........................59
Displaying a histogram ......................60
Selecting the metering method................61
Shooting three images with the exposure
shifted — Exposure Bracket...........62
Adjusting color tones
— White Balance ...........................63
Adjusting the flash level
— Flash Level ................................64
Shooting continuously ............................65
Recording 16 frames in succession
— Multi Burst.................................66
Shooting according to scene conditions
— Scene Selection..........................67
Shooting with special effects
— Picture Effect.............................70
Advanced viewing
Selecting the folder and playing back
images.............................................71
Enlarging a portion of a still image.........72
Enlarging an image
— Playback zoom...........................72
Recording an enlarged image
— Trimming...................................73
Playing back successive images
— Slide Show.................................73
Rotating still images — Rotate... ... .........74
Playing back images shot in Multi Burst
mode ...............................................75
Playing back continuously..................75
Playing back frame by frame ..............75
Protecting images — Protect...................76
Changing image size — Resize...............77
Still image printing
Printing still images.................................79
Direct printing.........................................80
Preparing the camera ..........................80
Connecting the camera to the printer
........................................................81
Printing in single-image mode.......... ..81
Printing in index mode... ... ..................83
Having images printed at a shop .............84
Marking print marks ...........................84
Marking print marks in single-image
mode............................................... 84
Marking print marks in index mode... 85
Enjoying images on your computer
Copying images to your computer
— For Windows users.................... 86
Installing the USB driver.................... 87
Connecting the camera to your computer
........................................................ 88
Copying images.................................. 89
Viewing the images on your computer
........................................................ 91
Image file storage destinations and file
names.............................................. 92
Viewing image files once copied to a
computer with your camera............ 94
Installing “Picture Package” .............. 94
Copying images using “Picture Package”
........................................................ 96
Using “Picture Package” .................... 97
Printing images................................... 98
Copying images to your computer
— For Macintosh users .................. 99
Troubleshooting
Troubleshooting.................................... 101
Warnings and messages........................ 110
Self-diagnosis display....................... .... 112
Additional information
Menu items........................ ....................113
Setup items ............................................116
Precautions ............................................118
On “Memory Stick” ... ... .... ....................119
On “InfoLITHIUM” battery pack .........120
Specifications ........................................121
The LCD screen ....................................123
Index
Index......................................................127
9
Identifying the parts
1
q
See the pages in parentheses for details of operation.
Camera
2
3
4
5
6
7
8
9
;
A Access lamp (23) B “Memory Stick Duo” insertion
slot (23)
C Speaker D LCD screen
For details on the items on the LCD
10
screen, see page 123 to 126.
qa
qs
qd
qf
qg
qh
qj
qk
E For shooting: PHOTO/MOVIE
buttons (30) For viewing: b/z/B (43)
F PHOTO button (30) G HYBRID switch (32) H MENU button (53, 113) I (Image Size/Delete)
button (24, 49)
J Control button
Menu on: v/V/b/B/z (20)/ Menu off: / / / (39/38/36/61)
K For shooting: Zoom (W/T) lever
(35)
For viewing: / (Playback zoom) lever (72)/
(Index) lever (45)
L RESET button (101) M POWER button (19) N /CHG lamp (orange) (15)
REC: Recording mode lamp (green) (19) PLAY: Playback mode lamp (green) (43)
O MODE button (29, 43) P MOVIE button (30) Q 5SEC switch (34) R (Display/LCD backlight on/
off) button (35)
1
7
2
3
4
5
6
9
q;
8
A Lens B Flash (39) C Self-timer lamp (38)/
AF illuminator (40, 116)
D Battery cover E Battery eject lever (16) F Tripod receptacle G Hook for wrist strap
Attaching the strap is recommended to prevent dropping the camera (page 13).
H Microphones I Multi connector J Multi connector cover
Use a tripod with a screw length of less than
5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods having longer screws, and may damage the camera.
11
Cyber-shot Station
This is used when charging the battery pack or connecting the camera to a TV or a computer, etc.
1
2
3
4
A Camera connector B (USB) jack (88) C A/V OUT (STEREO) jack (46) D DC IN jack (14)
How to connect
Connect the camera as illustrated.
2
1
3
1 Slide the tray. 2 Open the multi connector cover on the
camera.
3 Connect the camera and slide the tray.
Make sure to slide the tray firmly.
How to disconnect
Grasp the camera and the Cyber-shot Station (supplied) as illustrated and disconnect the camera.
2
1
Be sure to turn off the camera before you
connect the camera to the Cyber-shot Station or disconnect the camera from the Cyber-shot Station.
• Do not disconnect the camera from the Cyber-shot Station during the USB connection, as the data may be corrupted. To cancel the USB connection, see P on page 89 (Windows) or 1 on page 99 (Macintosh).
12
How to handle the camera
When opening the LCD panel, rotate the panel to the left as illustrated.
Attach the wrist strap as illustrated.
The LCD panel rotates 90 degrees and 180 degrees to each side as illustrated.
90°
180°
When opening the LCD panel, make sure not to touch the lens portion with your fingers.
When carrying the camera, close the LCD screen as illustrated.
Do not hold the LCD panel with your hand.
13
G
etting starte
d
Charging the battery pack
Cyber-shot Station
DC IN jack
AC Adaptor
1 2 3
, Open the battery cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when charging the battery pack (page 19).
Your camera operates with the
“InfoLITHIUM” NP-FT1 battery pack (T type) (supplied). You can use only T type battery pack (page 120).
, Install the battery pack, then
close the battery cover.
Make sure the battery pack is firmly inserted all the way, then close the cover.
Battery insertion slot
Facing the V marks on the side of the battery pack in the same direction as the V mark on the battery insertion slot, insert the battery pack until it is locked.
, Connect the AC Adaptor
Connect the DC plug with the v mark facing up.
Do not short the DC plug of the AC Adaptor
Clean the DC plug of the AC Adaptor with a
DC plug
(supplied) to the DC IN jack of the Cyber-shot Station (supplied).
with a metallic object, as this may cause malfunction.
dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack.
14
2 To wall outlet (wall socket)
2
You can connect the camera to the Cyber-shot
Station even when the LCD panel on the camera is open.
When charging is completed, remove the
camera from the Cyber-shot Station.
Getting started
1
Power cord (mains lead)
4
, Connect the power cord (mains
lead) to the AC Adaptor and to a wall outlet (wall socket).
1
3
5
, Connect the camera to the
Cyber-shot Station (page 12).
Connect the camera as illustrated. Make sure slide the tray firmly. The /CHG lamp lights up when charging begins.
/CHG
/CHG lamp
The /CHG lamp goes off when charging is completed.
Disconnecting the AC Adaptor from the Cyber-shot Station
Hold the DC plug itself and the Cyber-shot Station as illustrated and disconnect the cable.
DC plug
15
To charge the battery pack only using the AC Adaptor
You can charge the battery pack without the Cyber-shot Station, such as during your travels. Connect the DC plug of the AC Adaptor to the camera with the apex of the v mark on the camera and the apex of the v mark on the DC plug facing.
Multi connector
1
DC plug
To wall outlet
(wall socket)
2
AC Adaptor
Power cord (mains lead)
• Be sure to turn off your camera when charging the battery pack (page 19).
When placing the camera, make sure the LCD
screen is facing up.
After charging the battery pack, disconnect the AC Adaptor both from the multi connector of the camera and from a wall outlet (wall socket).
3
Battery remaining indicator
The battery remaining indicator on the LCD screen shows the remaining shooting or viewing time.
Remaining indicator
60min
Remaining time
In standby mode, the battery remaining time for
still image shooting is indicated.
The displayed time remaining may not be
correct under certain circumstances or conditions.
Charging time
Approximate time to charge a completely discharged battery pack using the AC Adaptor at a temperature of 25°C (77°F).
Battery pack
NP-FT1 (supplied) Approx. 150
The charging time may become longer under
certain circumstances or conditions.
Charging time (min.)
To remove the battery pack
Battery eject lever
Open the battery cover. Slide the battery eject lever in the direction of the arrow, and remove the battery pack.
Be careful not to drop the battery pack when
removing it.
16
Number of images and battery life that can be recorded/ viewed
The tables show the approximate number of images and the battery life that can be recorded/viewed when you shoot images in normal mode with a fully charged battery pack (supplied) at a temperature of 25°C (77°F). The numbers of images that can be recorded or viewed take into account changing the “Memory Stick Duo” as necessary. Note that the actual numbers may be less than indicated depending on the conditions of use.
The battery capacity decreases as the number of
uses increases and over time (page 121).
Shooting still images
Under the average conditions
NP-FT1 (supplied) LCD
No. of
backlight
images
On Approx. 160 Approx. 80
Normal
Off Approx. 190 Approx. 95 On Approx. 120 Approx. 60
Hybrid
Off Approx. 140 Approx. 70
1)
Shooting in the following situations: – (P.Quality) is set to [Fine] – Shooting one time every 30 seconds
1)
Battery life (min.)
– The zoom is switched alternately between
the W and T ends – The flash strobes once every two times – The power turns on and off once every ten
times The measurement method is based on CIPA standard. (CIPA: Camera & Imaging Products Association)
Viewing still images
NP-FT1 (supplied) No. of images Battery life (min.)
Approx. 2600 Approx. 130
2)
Viewing single images in order at about three second intervals
2)
Shooting movies
Movie size
640 (30fps)
320 (15fps)
NP-FT1 (supplied) LCD backlight OnLCD backlight
Approx. 50 min.
Approx. 60 min.
Off
Approx. 60 min.
Approx. 70 min.
Viewing movies
Movie size NP-FT1 (supplied )
640 (30fps) Approx. 110 min. 320 (15fps) Approx. 120 min.
The number of images and the battery life that
can be recorded/viewed are decrea sed under the following conditions: – The surrounding temperature is low – The flash is used – The camera has been turned on and off many
times – The zoom is used frequently – [LCD Backlight] is set to [Bright] on the
Setup screen – The battery power is low
When recording and playing back still images,
the number of images recordable/playable and the battery life do not vary according to the image size.
Getting started
17
Using the AC adaptor
Multi connector cover
DC plug
1
, Connect the AC Adaptor
(supplied) to the DC IN jack of your camera.
When placing the camera, make sure the LCD screen is facing up. Connect the DC plug of the AC Adaptor to the camera with the apex of v mark on the camera and the apex of v mark on the DC plug facing.
Connect the AC Adaptor to an easily acces sible
wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
AC Adaptor
2 To wall outlet
(wall socket)
1
Power cord (mains lead)
2
, Connect the power cord (mains
lead) to the AC Adaptor and then to a wall outlet (wall socket).
After using the AC Adaptor, disconnect it both
from the multi connector of the camera and from a wall outlet (wall socket).
The set is not disconnected from the AC power
source (mains) as long as it is connected to the wall outlet (wall socket) even if the set itself has been turned off.
Using your camera abroad
Power sources
You can use your camera in any country or region with the AC Adaptor/power cord (mains lead) (supplied) within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].
AC-LM5/LM5A
Do not use an electronic transformer (travel
converter), as this may cause a malfunction.
18
Turning on/off your camera
There are two methods to turn on the camera.
Turning on the power by opening the LCD panel
Recording mode lamp
Rotate the LCD panel in the direction of the arrow as illustrated. The recording mode lamp (green) lights up and the power is on.
When you rotate the LCD panel fast, the power
may not be turned on. In a case like this, rotate it slowly again.
Turning off the power
Close the LCD panel. The camera turns off.
Turning on the power by pressing POWER.
POWER
Recording mode lamp
The recording mode lamp (green) lights up and the power is on.
When the LCD screen is facing up with the
LCD panel closed, turning on the power turns the camera to PLAY mode.
Turning off the power
Press POWER again. The camera turn off.
When you turn on your camera for the first
time, the Clock Set screen appears (page 21).
Auto power-off function
If you do not operate the camera for about three minutes during shooting or viewing or when performing Setup, the camera turns off automatically to prevent wearing down the battery. The auto power-off function only operates when the camera is operating using a battery pack. The auto power-off function also will not operate in the following circumstances.
• When viewing movies
• When playing back a slide show
• When a connector is plugged into the (USB) jack or the A/V OUT
(STEREO) jack with the camera connected to the Cyber-shot Station
Getting started
In PLAY mode, if you close the LCD panel
with the LCD screen facing up, the camera does not turn off.
19
How to use the control button
Camera
Normal
Hybrid Rec:
Off
Digital Zoom:
Off
Date/Time:
1
2
1
Red Eye Reduction: AF Illuminator: Auto Review:
SELECTMENU
Setup 2
File Number: USB Connect:
OK
Video Out:
Cancel
Clock Set:
Off Auto off
Adjusting the LCD screen
Maximum 90 degrees
Maximum 180 degrees
To change the current settings of the camera, bring up the menu or the Setup screen (page 54), and use the control button to make the changes. To set a menu item, press v/V/b/B on the control button to select the desired item and setting and make the setting. To set a Setup item, press v/V/b/B on the control button to select the desired item and setting, then press z to make the setting.
20
You can adjust the angle of the LCD screen to suit your situation. Adjust the LCD screen with the LCD panel open at 90 degrees.
Setting the date and time
1
, Open the LCD panel to turn on
the power.
The recording mode lamp (green) lights up and the Clock Set screen appears on the LCD screen.
To change the date and time, on
the Setup screen, select [Clock Set] in (Setup 2) (pages 54 and
117), and perform the procedure from step 2.
2
Clock Set
1 1
2004
/
/:
12 00
Y/M/D M/D/Y D/M/Y
OK
AM
Cancel
2
, Select the desired date display
format with v/V on the control button, then press z.
Select from [Y/M/D] (year/month/day), [M/D/Y] (month/day/year) or [D/M/Y] (day/month/year).
If the rechargeable battery (page 119), which
provides the power for saving the time data, ever becomes low, the Clock Set screen will appear again. When this happens, reset the date and time, by starting from step 2 above.
Clock Set
2004
/:
/
1 1
12 00
Y/M/D M/D/Y D/M/Y
OK
AM
Cancel
3
, Select the year, month, day,
hour or minute item you want to set with b/B on the control button.
The item to be set is indicated with v/V.
Getting started
21
Changing the language setting
Clock Set
2005
/:
/
1 1
10 00
Y/M/D M/D/Y D/M/Y
OK
AM
Cancel
4
, Set the numeric value with v/V
on the control button, then press z to enter it.
After entering the number, v/V moves to the next item. Repeat steps 3 and 4 until all of the items are set.
If you selected [D/M/Y] in step 2, set the time
on a 24-hour cycle.
Midnight is indicated as 12:00 AM, and noon
as 12:00 PM.
Clock Set
2005
/:
/
1 1
10 30
Y/M/D M/D/Y D/M/Y
OK
AM
Cancel
5
, Select [OK] with B on the
control button, then press z.
The date and time are entered and the clock starts to keep time.
To cancel the date and time setting, select
[Cancel] with v/V/b/B on the control button, then press z.
You can change the screen display like menu items, warnings and messages in your desired language. To change the language setting, select (Language) in (Setup 1) on the Setup
1
A
screen, (pages 54 and 117) and select the desired language.
22
Shooti
ng image
s
Inserting and removing a “Memory Stick Duo”
Terminal side
Access lamp
, Insert the “Memory Stick Duo.”
Insert a “Memory Stick Duo” all the way in until it clicks as illustrated.
• When using this camera, the Memory Stick Duo Adaptor (supplied) is not necessary.
For details on “Memory Stick Duo”, see
page 119.
When inserting a “Memory Stick Duo”, make sure of the direction and insert it all the way to the connector. If the “Memory Stick Duo” is not inserted correctly, you may not be able to record or display images with the “Memory Stick Duo”. And also it may result in malfunction of both the camera and “Memory Stick Duo”.
To remove a “Memory Stick Duo”
Push the “Memory Stick Duo” to pop it out.
• Whenever the access lamp is lit, the camera is recording or reading an image. Never remove the “Memory Stick Duo” or turn off the power at this time. The data may be corrupted.
Shooting images
23
Setting the image size
MODE
1
, Turn on the power (page 19).
In PLAY mode, turn to the REC mode with
MODE.
24
5M
3:2 3M 1M VGA
Photo Size
5M
[ 3]
2
, Press (Image Size).
The Image Size setup appears.
For details on the image size, see page 25.
5M 3:2 3M 1M
VGA
VGA
Photo Size Movie Size
[ 48]
640(30fps 320(30fps
320(15fps
) )
)
320 15f
[00:03:48]
3
, Select (Photo Size) or
(Movie Size) with b/B on the control button, then select the desired image size with v/V.
The image size is set. When the setting is complete, press (Image Size) so that the Image Size setup disappears from the LCD screen.
The number of images recordable/remaining
time of the “Memory Stick Duo” inserted in the camera is indicated on the lower part of the LCD screen.
The image size selected here is maintained even
when the power is turned off.
Loading...
+ 110 hidden pages