Sony DSC-J10 Users guide [zh, xz]

DSC-J10

4-266-073-91(1)

Digital Still Camera / Operating Instructions GB

Cámara fotografía digital / Manual de instrucciones ES

Câmera fotográfica digital / Manual de instruções PT

DSC-J10

English

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. DSC-J10 Serial No. ______________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION

Observe the following cautions, as there may be a risk of heat generation, fire or explosion. * Lithium-ion battery is built into the product.

• Charge the product by the designated charging method.

• Do not place the product in or near fire, or put the product in a microwave.

• Do not leave the product in a car in hot weather.

• Do not store or use the product in a hot and humid place such as in a sauna bath.

• Do not disassemble, crush or pierce the product.

• Do not expose the product to excessive shock such as dropping from a high place.

• Do not expose the product to high temperatures above 60°C (140°F).

• Keep the product dry.

Dispose of the product appropriately. Charge the product by the designated charging method in the instruction manual.

[ AC Adaptor

Connect the AC Adaptor to the nearest wall outlet (wall socket). If some trouble occurs while using the AC Adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

The power cord (mains lead), if supplied, is designed specifically for use with this camera only, and should not be used with other electrical equipment.

For Customers in the U.S.A.

UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669).

The number below is for the FCC related matters only.

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY Model No.: DSC-J10 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo,

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

San Diego, CA 92127 U.S.A.

For Customers in Europe

[ Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

[ Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate collection systems)

please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,

[ Disposal of waste batteries (applicable in the European Union

and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.

potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

By ensuring these batteries are disposed of correctly, you will help prevent

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM

For details on advanced operations, please read “Cyber-shot User Guide” (HTML) on the CD-ROM (supplied) using a computer.

Insert the CD-ROM into the CD-ROM drive.

For Windows users:

1 Click [User Guide] t [Install]. 2 Start “User Guide” from the shortcut on the desktop.

For Macintosh users:

1 Select the [User Guide] and copy [eng] folder stored in the [User Guide]

folder to your computer.

2 After copying is complete, double-click “index.html” in the [eng] folder.

Checking the accessories supplied

• AC adaptor AC-UB10 (1)

• Power cord (mains lead) (not supplied in the USA and Canada) (1)

• Dedicated USB connection support cable (1) (Sony Corporation 1-838-714-)

• Wrist strap (1)

•CD-ROM (1) – Cyber-shot application software – “Cyber-shot User Guide”

• Instruction Manual (this manual) (1)

• The battery pack is built into this camera.

Identifying parts

A ON/OFF (Power) button B Shutter button C Power/Charge lamp D Flash E Self-Timer lamp/Smile Shutter

lamp

F Microphone G Lens H LCD screen

I (Playback) button

J For shooting: W/T (Zoom) lever

For viewing: (Playback zoom) lever/ (Index) lever

K Hook for wrist strap L Speaker M Mode switch N (Delete) button O MENU button P Control button

Menu on: v/V/b/B/z Menu off: DISP/ / /

Q Tripod receptacle

• Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

R RESET button S Lock release lever for USB arm T (USB) arm U USB arm cover

Charging the camera

The battery pack is built into the camera. Charge the camera before using for the first time.

Countries/regions other than the USA and Canada

Power cord (Mains lead)

The USA and Canada

Plug

Dedicated USB connection support cable

Press the ON/OFF (Power) button to turn off the

camera.

Slide the lock release lever for USB arm.

• The USB arm cover opens as shown in the illustration, then the USB arm comes out.

Connect the AC adaptor to the wall outlet (wall socket).

• The Power/Charge lamp lights up in orange and charging starts.

• Be sure to turn off the camera.

• You can charge the partially discharged battery pack.

Power/Charge lamp

Lit: Charging Off: Charging finished

Lock release lever for USB arm

Dedicated USB connection support cable (supplied)

USB arm

To retract the USB arm

Pull out the cable, and then lay the USB arm with finger. Then, the USB arm cover closes.

Notes

• Do not push on the USB arm forcibly.

• Be careful not to pinch your finger in the USB arm.

• If the USB arm cover is closed, open the USB arm cover and lay the USB arm. Do not push the USB arm when the USB arm cover is closed.

• Use a nearby wall outlet (wall socket) when using the supplied AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using the camera.

• When charging is finished, disconnect the dedicated USB connection support cable (supplied) from the computer, or the AC Adaptor from the wall outlet (wall socket).

• Make sure to use the supplied AC adaptor or the supplied dedicated USB connection support cable for charging.

• If the Power/Charge lamp does not light up even after connecting the AC adaptor to the camera and the wall outlet (wall socket), the battery pack is in charging standby condition as the ambient temperature is out of the appropriate range. Charging starts and the lamp lights up when the ambient temperature becomes appropriate for charging. Charging the battery pack in an ambient temperature of 10°C to 30°C (50°F to 86°F) is recommended.

Charging the battery pack with a computer

You can charge the battery pack with the dedicated USB connection support cable.

Power/Charge lamp

Dedicated USB connection support cable

1 Press the ON/OFF (Power) button to turn off the camera. 2 Connect the camera to the computer that is turned on with the dedicated

USB connection support cable (supplied).

• The Power/Charge lamp lights up in orange, and charging starts. The Power/ Charge lamp turns off, charging has completed.

• The Power/Charge lamp may turn off when the temperature is outside of the recommended operating temperature (10°C to 30°C (50°F to 86°F)).

3 When charging is finished, delete the USB connection between the camera

and computer.

Note

• Be careful also of the following points: – When you connect the camera to a laptop computer that is not connected to an

AC power source, the battery of the laptop computer may be depleted rapidly. Do not leave the camera connected to the computer for a long time.

– Do not perform start-up, restart, resuming from sleep mode, or shut-down

operations on your computer while the camera is connected. Otherwise the camera may malfunction. Disconnect the camera from the computer before performing these operations.

– Charging the battery with customized or hand-built computers is not guaranteed.

Charging time

Full charge time: approx. 150 min.

Notes

• Time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.

• Besides charging the built-in battery, the supplied AC Adaptor can also be used to supply power in USB and viewing mode. The camera may not work in shooting mode because of the voltage reduction the AC adaptor.

Battery life and number of still images you can record/view

Recording Battery life: approx. 105 min./Number of images: approx. 210 images Viewing Battery life: approx. 150 min./Number of images: approx. 3000 images

Note

• The number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. (CIPA: Camera & Imaging Products Association) – DISP (Screen Display Settings) is set to [Normal]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. – The built-in battery pack is used at an ambient temperature of 25°C (77°F).

Supplying the power from the computer

Power can be supplied from the computer even when the camera is turned on. When importing images to your computer, you can perform the operation without having to worry about running out of the battery charge.

Note

• When changing the settings of the camera, the power is not supplied even though the dedicated USB connection support cable (supplied) is connected.

Setting the date and time

Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time.

ON/OFF (Power) button

Control button

Select items: v/V/b/B Set: z

Press the ON/OFF (Power) button.

Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time.

• It may take time for the power to turn on and allow operation.

Set [Date & Time Format], [Daylight Savings] and [Date

& Time], then press [OK].

• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

Select the desired area, following the instructions on the

screen, then press z t [OK].

Select the desired display color and display resolution

mode, following the instructions on the screen.

Shooting still images/movies

Shutter button

W: zoom out

Mode switch

: Still image : Movie

Shooting still images:

Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the z indicator lights.

Press the shutter button fully down.

Shooting movies:

Press the shutter button fully down to start recording.

Slide the W/T (zoom) lever to (T) to zoom in, and to (W) to zoom out.

Press the shutter button fully down again to stop

recording.

T: zoom in

Viewing images

W: zoom out T: zoom in

(Playback)

Control button

(Delete)

Select images: B (next)/b (Previous) Set: z

Press the (Playback) button.

Selecting next/previous image

Select an image with B (next)/b (previous) on the control button. Press z in the center of the control button to view movies.

Deleting an image

1 Press the (Delete) button. 2 Select [This Image] with v on the control button, then press z.

Returning to shooting images

Press the shutter button halfway down.

List of icons displayed on the screen (When shooting still images)

Display Indication

z AE/AF lock

ISO400 ISO number

NR slow shutter

125 Shutter speed F3.5 Aperture value

Display Indication

Battery remaining Low battery warning

Image size

Scene Selection Shooting mode Scene Recognition icon White balance Metering Mode Vibration warning Scene Recognition DRO Smile Detection

Sensitivity indicator

+2.0EV Exposure Value

AF range finder frame indicator

Standby Recording a movie/

Standby a movie

0:12 Recording time (m:s)

Display Indication

Recording folder

96 Number of recordable

images Recording/Playback

Media (Internal memory)

Flash mode Red-eye reduction

Flash charging

Zoom scaling

Close Focus

Display Indication

Self-Timer Destination Burst Settings Overheating warning

Display Indication

Face Detection Database file full/

Database file error warning

AF range finder frame Spot metering cross hair

Introduction of other functions

Other functions used when shooting or playing back can be operated using the Control button or MENU button on the camera. This camera is equipped with a Function Guide that allows you to easily select from the functions. While displaying the guide, try the other functions.

Control button

Function Guide

Control button

DISP (Screen Display Settings): Allows you to change the screen display.

(Self-Timer): Allows you to use the self-timer. (Smile Shutter): Allows you to use the Smile Shutter mode.

(Flash): Allows you to select a flash mode for still images.

Menu Items

Shooting

REC Mode Select recording mode.

Scene Selection Select pre-set settings to match various scene conditions.

Easy Mode Shoot still images using minimal functions.

Shooting Direction

Image Size

Macro

Burst Settings Select single-image mode or burst mode.

EV Adjust the exposure manually.

Set the direction to pan the camera when shooting Sweep Panorama images.

Select the image size for still images, panoramic images or movie files.

The camera adjusts the focus automatically from distant subjects to close-up.

ISO Adjust the luminous sensitivity.

White Balance Adjust the color tones of an image.

Focus Select the focus method.

Metering Mode

Scene Recognition

Smile Detection Sensitivity

Face Detection

Anti Blink

DRO

Select the metering mode that sets which part of the subject to measure to determine the exposure.

Set to automatically detect shooting conditions in Intelligent Auto mode.

Set the Smile Shutter function sensitivity for detecting smiles.

The camera detects faces and adjusts various settings automatically.

Set to automatically shoot two images and select the image with no blinking.

Set the DRO function to correct the brightness and contrast and improve the image quality.

Viewing

Easy Mode

Share it Later Select the images to upload to a share site.

Slideshow Select a method for continuous playback.

View Mode Select the display format for images.

Retouch Retouch an image using various effects.

Delete Delete an image.

Protect Protect the images.

Rotate Rotate a still image to the left or right.

Select Folder

Set the text-size increased and all indicators become easier to see.

Select a folder containing the images you want to play back.

Setting items

If you press the MENU button while shooting or during playback,

(Settings) is provided as a final selection. You can change the default

settings on the (Settings) screen.

Shooting Settings

Main Settings

Internal Memory Tool

Clock Settings

Grid Line/Disp. Resolution/Digital Zoom/Red Eye Reduction/Blink Alert

Beep/Language Setting/Function Guide/Display color/ Power Save/Initialize/USB Connect/USB Power Supply/ LUN Setting/Download Music/Empty Music

Format/Create REC. Folder/Change REC. Folder/Delete REC. Folder/File Number

Area Setting/Date & Time Setting

Number of still images and recordable time of movies

The number of still images and recordable time may vary depending on the shooting conditions.

Still images

(Units: Images)

Size

16M 540 VGA 23500 16:9(12M) 660

Movies

Capacity

Approx. 4GB

The table below shows the approximate maximum recording times. These are the total times for all movie files. The recordable movie file size is up to approx. 2GB for each file.

(Units: hour : minute : second)

Size

Capacity

VGA 0:55:00 QVGA 3:25:00

Approx. 4GB

Notes on using the camera

Changing the language setting

The screen language setting, press the MENU button, then select

(Settings) t (Main Settings) t [Language Setting].

On use and care

Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping or stepping on the product. Be particularly careful of the lens.

Notes on recording/playback

• Before you start recording, make a trial recording to make sure that the

camera is working correctly.

• The camera is neither dust-proof, nor splash-proof, nor water-proof.

• Avoid exposing the camera to water. If water enters inside the camera, a

malfunction may occur. In some cases, the camera cannot be repaired.

• Do not aim the camera at the sun or other bright light. It may cause the

malfunction of the camera.

• If moisture condensation occurs, remove it before using the camera.

• Do not shake or strike the camera. It may cause a malfunction and you may

not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.

Do not use/store the camera in the following places

• In an extremely hot, cold or humid place

In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction.

• Under direct sunlight or near a heater

The camera body may become discolored or deformed, and this may cause a malfunction.

• In a location subject to rocking vibration

• Near a location that generates strong radio waves, emits radiation or is strongly

magnetic place. Otherwise, the camera may not properly record or play back images.

• In sandy or dusty places

Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired.

On carrying

Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera.

Notes on the LCD screen and lens

• The LCD screen is manufactured using extremely high-precision technology

so over 99.99% of the pixels are operational for effective use. However,

some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording.

On camera’s temperature

Your camera and battery may get warm due to continuous use, but it is not a malfunction.

On the overheat protection

Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the LCD screen before the power turns off or you can no longer record movies.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing: – Do not expose the camera to chemical products such as thinner, benzine, alcohol,

disposable cloths, insect repellent, sunscreen or insecticide.

Cleaning the lens

Wipe the lens with a soft cloth to remove fingerprints, dust, etc.

Note on disposal/transfer

• When using the software pre-loaded on the internal memory, personal information such as IDs and mail addresses may be saved on the internal memory of the camera. Before changing ownership of the camera, or before disposal, delete any personal information.

• Even if you delete data in the internal memory or format the camera, you may not delete data from the internal memory completely.

• To prevent data on the internal memory from being recovered, write unintelligible data onto the internal memory of the camera.

Specifications

Camera

[System]

Image device: 7.75 mm (1/2.3 type)

color CCD, Primary color filter

Total pixel number of camera:

Approx. 16.4 Megapixels

Effective pixel number of camera:

Approx. 16.1 Megapixels

Lens: 4× zoom lens

f = 6.18 mm – 24.7 mm (35 mm – 140 mm (35 mm film equivalent)) F3.5 (W) – F4.6 (T)

Exposure control: Automatic exposure,

Scene Selection (10 modes)

White balance: Automatic, Daylight,

Cloudy, Fluorescent 1/2/3, Incandescent, Flash, One Push

Recording interval for Burst mode:

Approx. 0.95 second

File format:

Still images: JPEG (DCF Ver. 2.0, Exif Ver. 2.3, MPF Baseline) compliant Movies: AVI (Motion JPEG)

Recording media: Internal Memory

(Approx. 4GB)

• When measuring media capacity,

1GB equals 1billion bytes, a portion of which is used for system management and/or application files. Available user capacity: Approx.

3.9GB

Flash: Flash range (ISO sensitivity

(Recommended Exposure Index) set to Auto): Approx. 0.2 m to 3.6 m (W) (7 7/8 inches to 11 feet 9 3/4 inches) Approx. 0.2 m to 2.8 m (T) (7 7/8 inches to 9 feet 2 1/4 inches)

[Input and Output connectors]

USB arm: type A (built-in) USB communication: Hi-Speed USB

(USB 2.0)

[LCD screen]

LCD panel:6.7 cm (2.7 type) TFT drive Total number of dots: 230,400 (960 ×

240) dots

[Power, general]

Power:

• Built-in rechargeable battery pack: 3.7 V

• Supplied from the wall outlet (wall socket) by connecting with the supplied AC adaptor (ACUB10): 5 V

• Power consumption (during shooting): 1.6 W

Operating temperature: 0°C to 40°C

(32°F to 104°F)

Storage temperature: –20°C to +60°C

(–4°F to +140°F)

Dimensions:

93.6 × 59.4 × 17.3 mm

(3 3/4 × 2 3/8 × 11/16 inches) (W/H/D, excluding protrusions)

Mass:

Approx. 126 g (4.4 oz.) Microphone: Monaural Speaker: Monaural Exif Print: Compatible

PRINT Image Matching III:

Compatible

AC adaptor (AC-UB10)

Power requirements: AC 100 V to 240

V, 50 Hz/60 Hz, 70mA Output voltage: DC 5 V, 0.5 A Operating temperature: 0°C to 40°C

(32°F to 104°F) Storage temperature: -20°C to +60°C

(-4°F to +140°F) Dimensions: Approx. 50 × 22 × 54 mm

(2 × 7/8 × 2 1/4 inches) (W/H/D) Mass: Approx. 48 g (1.7 oz) (For USA

and Canada models), Approx. 43 g

(1.5 oz) (Except USA and Canada

models)

Design and specifications are subject to change without notice.

Trademarks

• , “Cyber-shot” are trademarks of Sony Corporation.

• Windows is registered trademark of Microsoft Corporation in the United States and/or other countries.

• Macintosh is registered trademark of Apple Inc..

• In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or ® marks are not used in all cases in this manual.

Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.

Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.

Español

Nombre del producto: Cámara Digital Modelo: DSC-J10

POR FAVOR LEA DETALLADAMENTE ESTE MANUAL DE INSTRUCCIONES ANTES DE CONECTAR Y OPERAR ESTE EQUIPO.

RECUERDE QUE UN MAL USO DE SU APARATO PODRÍA ANULAR LA GARANTÍA.

AVISO

Para reducir el riesgo de incendio o descarga eléctrica, no exponga la unidad a la lluvia ni a la humedad.

INSTRUCCIONES DE SEGURIDAD IMPORTANTES

-GUARDE ESTAS INSTRUCCIONES PELIGRO PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA ELÉCTRICA, SIGA ATENTAMENTE ESTAS INSTRUCCIONES

Si la forma de la clavija no encaja en la toma de corriente, utilice un accesorio adaptador de clavija de la configuración apropiada para la toma de corriente.

PRECAUCIÓN

Tenga en cuenta las siguientes precauciones, ya que puede haber riesgo de generación de calor, incendio o explosión. * La batería de ion de litio está integrada en el producto.

• Cargue el producto mediante el método de carga indicado.

• No coloque el producto en el fuego o cerca de él, ni coloque el producto en un microondas.

• No deje el producto en el interior de ningún automóvil cuando el clima sea caluroso.

• No almacene ni utilice el producto en un lugar caluroso y húmedo, como una sauna.

• No desmonte, aplaste ni agujeree el producto.

• No exponga el producto a golpes fuertes, como el de una caída desde una posición elevada.

• No exponga el producto a altas temperaturas, superiores a 60 °C

• Conserve el producto en un lugar seco.

Deseche el producto de manera adecuada. Cargue el producto mediante el método de carga indicado en el manual de instrucciones.

[ Adaptador de alimentación de ca

Conecte el Adaptador de alimentación de ca a la toma de pared más cercana. Si se produce algún problema durante el uso del Adaptador de alimentación de ca, corte inmediatamente el suministro eléctrico; para ello, desconecte el enchufe de la toma de pared.

El cable de alimentación, si se ha suministrado, está diseñado de manera específica para utilizarse únicamente con esta cámara y no debería utilizarse con ningún otro equipo eléctrico.

Atención para los clientes en Europa

[ Aviso para los clientes de países en los que se aplican las

directivas de la UE

El fabricante de este producto es Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075, Japón. El representante autorizado en lo referente al cumplimiento de la directiva EMC y a la seguridad de los productos es Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Alemania. Para resolver cualquier asunto relacionado con el soporte técnico o la garantía, consulte las direcciones que se indican en los documentos de soporte técnico y garantía suministrados por separado.

Este producto se ha probado y cumple con la normativa que establece la Directiva EMC si se utiliza un cable de conexión de menos de 3 metros de longitud.

[ Atención

Los campos electromagnéticos a frecuencias específicas podrán influir en la imagen y el sonido de esta unidad.

[ Aviso

Si la electricidad estática o el electromagnetismo interrumpen la transmisíon de datos (fallo), reinicie la aplicación o desconecte el cable de comunicación (USB, etc.) y vuelva a conectarlo.

[ Tratamiento de los equipos eléctricos y electrónicos al final de

su vida útil (aplicable en la Unión Europea y en países europeos con sistemas de recogida selectiva de residuos)

Este símbolo en el equipo o el embalaje indica que el presente producto no puede ser tratado como residuos domésticos normales, sino que debe entregarse en el correspondiente punto de recogida de equipos eléctricos y electrónicos. Al asegurarse de que este producto se desecha correctamente, Ud. ayuda a prevenir las consecuencias negativas para el medio ambiente y la salud humana que podrían derivarse de la incorrecta manipulación en el momento de deshacerse de este producto. El reciclaje

información detallada sobre el reciclaje de este producto, póngase en contacto con el ayuntamiento, el punto de recogida más cercano o el establecimiento donde ha adquirido el producto.

de materiales ayuda a conservar los recursos naturales. Para recibir

[ Tratamiento de las baterías al final de su vida útil (aplicable en la

Unión Europea y en países europeos con sistemas de recogida selectiva de residuos)

Este símbolo en la batería o en el embalaje indica que la batería proporcionada con este producto no puede ser tratada como un residuo doméstico normal. En algunas baterías este símbolo puede utilizarse en combinación con el símbolo químico. El símbolo químico del mercurio (Hg) o del plomo (Pb)

0,004% de plomo. Al asegurarse de que estas baterías se desechan correctamente, Ud. ayuda a prevenir las consecuencias negativas para el medio ambiente y la salud humana que podrían derivarse de la incorrecta manipulación en el momento de deshacerse de la batería. El reciclaje de materiales ayuda a conservar los recursos naturales. En el caso de productos que por razones de seguridad, rendimiento o mantenimiento de datos, sea necesaria una conexión permanente con la batería incorporada, esta batería solo deberá ser reemplazada por personal técnico cualificado para ello. Para asegurarse de que la batería será tratada correctamente, entregue el producto al final de su vida útil en un punto de recogida para el reciclado de aparatos eléctricos y electrónicos. Para las demás baterías, vea la sección donde se indica cómo quitar la batería del producto de forma segura. Deposite la batería en el correspondiente punto de recogida para el reciclado. Para recibir información detallada sobre el reciclaje de este producto o de la batería, póngase en contacto con el ayuntamiento, el punto de recogida más cercano o el establecimiento donde ha adquirido el producto.

se añadirá si la batería contiene más del 0,0005% de mercurio o del

Consulte la “Guía del usuario de Cyber-shot” (HTML) en el CD-ROM suministrado

Para obtener más información acerca de operaciones avanzadas, consulte la “Guía del usuario de Cyber-shot” (HTML) en el CD-ROM (suministrado) mediante un ordenador.

Inserte el CD-ROM en la unidad de CD-ROM.

Para usuarios de Windows:

1 Haga clic en [Guía del usuario] t [Instalación]. 2 Inicie la “Guía del usuario” desde el acceso directo del escritorio.

Para usuarios de Macintosh:

1 Seleccione la [Guía del usuario] y copie la carpeta [es] almacenada en la

carpeta [Guía del usuario] en el ordenador.

2 Una vez finalizada la copia, haga doble clic en “index.html” de la carpeta

[es].

Comprobación de los accesorios suministrados

• Adaptador de ca AC-UB10 (1)

• Cable de alimentación (no suministrado en EE. UU. ni Canadá) (1)

• Cable de soporte de conexión USB exclusivo (1) (Sony Corporation

1-838-714-)

• Correa para la muñeca (1)

•CD-ROM (1)

– Software de aplicación Cyber-shot – “Guía del usuario de Cyber-shot”

• Manual de instrucciones (este manual) (1)

• La batería está integrada en esta cámara.

Identificación de los componentes

H Pantalla LCD I Botón (Reproducción) J Para tomar imágenes: palanca

K Gancho de la correa para la

L Altavoz M Interruptor de modo N Botón (Eliminar) O Botón MENU P Botón de control

Q Rosca para trípode

R Botón RESET

A Botón ON/OFF (Encendido) B Botón del disparador C Indicador luminoso de

alimentación/carga

D Flash E Indicador luminoso del

autodisparador/Indicador luminoso del captador de sonrisas

F Micrófono

G Objetivo

S Palanca de desbloqueo del

T Conector plegable (USB) U Cubierta del conector plegable

W/T (Zoom) Para visualizar imágenes: palanca (Zoom de reproducción)/palanca

(Índice)

muñeca

Menú activado: v/V/b/B/z Menú desactivado: DISP/ / /

• Utilice un trípode que disponga de un tornillo con una longitud inferior a 5,5 mm de longitud. De lo contrario, no podrá fijar la cámara con seguridad, y es posible que se produzcan daños en esta.

conector plegable USB

USB

+ 99 hidden pages

Sony DSC-J10 Users guide [zh, xz]

Specifications and Main Features

Frequently Asked Questions

User Manual

Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM

Checking the accessories supplied

Identifying parts

Charging the camera

Setting the date and time

Shooting still images/movies

Viewing images

List of icons displayed on the screen (When shooting still images)

Introduction of other functions

Number of still images and recordable time of movies

Notes on using the camera

Specifications

Español

Consulte la “Guía del usuario de Cyber-shot” (HTML) en el CD-ROM suministrado

Comprobación de los accesorios suministrados

Identificación de los componentes