sony CDX-3700 Service Manual

SERVICE MANUAL
SUPPLEMENT-1
File this supplement with the service manual.
Subject : Change of Main and Key Boards
When performing service and inspection, check the suffix of the part number of the main and key boards.
1. DISCRIMINATION
CDX-3700
E Model
(ECN-CSB00629)
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.)
For schematic diagrams
• All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums.
• All resistors are in and 1/ specified.
% : indicates tolerance.
¢
C : panel designation.
Note: The components identified by mark ! or dotted line
U : B+ Line.
• Power voltage is dc 14.4V and f ed with regulated dc power
• Voltages are tak en with a V OM (Input impedance 10 M).
• Waveforms are taken with a oscilloscope.
• Circled numbers refer to waveforms.
• Signal path.
• (( )) : Page of supplement-1.
: internal component.
with mark ! are critical for safety. Replace only with part number specified.
supply from ACC and BATT cords. Voltage variations may be noted due to normal produc-
tion tolerances. Voltage variations may be noted due to normal produc-
tion tolerances.
F : FM f : AM J : CD
4
W or less unless otherwise
– MAIN BOARD (SIDE B) –
MAIN Board Part No. Former : 1-672-491-11 New : 1-672-491-12
For printed wiring boards
Y : parts extracted from the conductor side.
®
b : Pattern from the side which enables seeing.
Caution: Pattern face side: Parts on the pattern face side seen from the (Side B) pattern face are indicated. Parts face side: Parts on the parts face side seen from the (Side A) parts face are indicated.
• (( )) : Page of supplement-1.
: Through hole.
¢
: internal component.
(The other layer’s patterns are not indicated.)
– KEY BOARD (SIDE B) –
KEY Board Part No. Former : 1-672-492-11 New : 1-672-492-12
11
CDX-3700
3. SCHEMATIC DIAGRAM — MAIN SECTION (1/3) —
((Page 5))
• Wavef orms (MODE:PLA Y)
1
1.3Vp-p
9
(ARF)
IC102
2
0V
Approx. 200mVp-p
@™
(TE)
IC102
3
0V
Approx. 600mVp-p
(FE)
IC102
Note:
• Voltage and waveforms are dc with respect to ground under no-signal conditions. no mark : CD PLAY
44
((Page 6))
Loading...
+ 3 hidden pages