Sony CDX-3700 Service manual
SERVICE MANUAL
SUPPLEMENT-1
File this supplement with the service manual.
Subject : Change of Main and Key Boards
When performing service and inspection, check the suffix of the part number of
the main and key boards.
1. DISCRIMINATION
CDX-3700
E Model
(ECN-CSB00629)
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS
AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is
printed in each block.)
For schematic diagrams
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/
specified.
• % : indicates tolerance.
¢
•
• C : panel designation.
Note: The components identified by mark ! or dotted line
• U : B+ Line.
• Power voltage is dc 14.4V and f ed with regulated dc power
• Voltages are tak en with a V OM (Input impedance 10 MΩ).
• Waveforms are taken with a oscilloscope.
• Circled numbers refer to waveforms.
• Signal path.
• (( )) : Page of supplement-1.
: internal component.
with mark ! are critical for safety.
Replace only with part number specified.
supply from ACC and BATT cords.
Voltage variations may be noted due to normal produc-
tion tolerances.
Voltage variations may be noted due to normal produc-
tion tolerances.
F : FM
f : AM
J : CD
4
W or less unless otherwise
– MAIN BOARD (SIDE B) –
MAIN Board Part No.
Former : 1-672-491-11
New : 1-672-491-12
For printed wiring boards
• Y : parts extracted from the conductor side.
®
•
•
• b : Pattern from the side which enables seeing.
Caution:
Pattern face side: Parts on the pattern face side seen from the
(Side B) pattern face are indicated.
Parts face side: Parts on the parts face side seen from the
(Side A) parts face are indicated.
• (( )) : Page of supplement-1.
: Through hole.
¢
: internal component.
(The other layer’s patterns are not indicated.)
– KEY BOARD (SIDE B) –
KEY Board Part No.
Former : 1-672-492-11
New : 1-672-492-12
11
CDX-3700
• Semiconductor
Location
Ref. No. Location
(D501) B-10
D503 B-13
D504 B-12
D505 C-11
D506 D-13
D507 D-12
D508 E-11
D509 F-11
D510 E-12
D511 B-4
D512 E-10
D513 B-8
D514 D-8
D516 B-12
D517 B-12
D518 C-12
D519 C-2
D550 C-4
D551 B-4
D552 C-4
D601 K-12
D602 J-12
D605 J-11
D606 J-11
D607 J-11
D608 J-11
D610 J-10
D611 K-10
IC101 G-8
IC102 G-5
IC103 J-4
IC400 D-5
(IC500) B-6
IC600 H-11
IC601 I-9
IC700 D-3
2. PRINTED WIRING BOARDS — MAIN SECTION —
+
-
(LIMIT)
+
-
Q101 F-4
Q401 B-3
Q402 C-5
Q403 C-6
Q501 D-11
Q502 D-11
Q503 F-13
Q504 G-12
Q505 C-11
Q506 C-13
Q507 D-13
Q508 F-7
Q509 E-11
Q510 E-12
Q511 E-10
Q512 C-8
(Q513) A-8
Q514 C-8
Q515 D-7
Q516 B-3
Q517 F-11
Q550 B-3
Q551 B-4
Q601 J-13
Q701 G-2
Q702 G-2
Q703 J-7
Q704 F-2
Q705 F-3
( ) : SIDE B
SW3
(DISC IN 2)
SW2
(DISC IN 1)
+
-
SW4
CHUCKING
( )
DET
22
CDX-3700
((Page 8))
33
CDX-3700
3. SCHEMATIC DIAGRAM — MAIN SECTION (1/3) —
((Page 5))
• Wavef orms (MODE:PLA Y)
1
1.3Vp-p
9
(ARF)
IC102
2
0V
Approx. 200mVp-p
@™
(TE)
IC102
3
0V
Approx. 600mVp-p
@£
(FE)
IC102
Note:
• Voltage and waveforms are dc with respect
to ground under no-signal conditions.
no mark : CD PLAY
44
((Page 6))
4. SCHEMATIC DIAGRAM — MAIN SECTION (2/3) —
CDX-3700
((Page 4))
((Page 6))
55
Note:
• Voltage is dc with respect to ground under no-signal
(detuned) condition.
no mark : FM
< > : CD PLAY
Loading...